PPC: e500mc: add missing IVORs to bitmap
[qemu.git] / hw / acpi_piix4.c
1 /*
2 * ACPI implementation
3 *
4 * Copyright (c) 2006 Fabrice Bellard
5 *
6 * This library is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU Lesser General Public
8 * License version 2 as published by the Free Software Foundation.
9 *
10 * This library is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * Lesser General Public License for more details.
14 *
15 * You should have received a copy of the GNU Lesser General Public
16 * License along with this library; if not, see <http://www.gnu.org/licenses/>
17 *
18 * Contributions after 2012-01-13 are licensed under the terms of the
19 * GNU GPL, version 2 or (at your option) any later version.
20 */
21 #include "hw.h"
22 #include "pc.h"
23 #include "apm.h"
24 #include "pm_smbus.h"
25 #include "pci.h"
26 #include "acpi.h"
27 #include "sysemu.h"
28 #include "range.h"
29 #include "ioport.h"
30
31 //#define DEBUG
32
33 #ifdef DEBUG
34 # define PIIX4_DPRINTF(format, ...) printf(format, ## __VA_ARGS__)
35 #else
36 # define PIIX4_DPRINTF(format, ...) do { } while (0)
37 #endif
38
39 #define ACPI_DBG_IO_ADDR 0xb044
40
41 #define GPE_BASE 0xafe0
42 #define GPE_LEN 4
43 #define PCI_BASE 0xae00
44 #define PCI_EJ_BASE 0xae08
45 #define PCI_RMV_BASE 0xae0c
46
47 #define PIIX4_PCI_HOTPLUG_STATUS 2
48
49 struct pci_status {
50 uint32_t up;
51 uint32_t down;
52 };
53
54 typedef struct PIIX4PMState {
55 PCIDevice dev;
56 IORange ioport;
57 ACPIPM1EVT pm1a;
58 ACPIPM1CNT pm1_cnt;
59
60 APMState apm;
61
62 ACPIPMTimer tmr;
63
64 PMSMBus smb;
65 uint32_t smb_io_base;
66
67 qemu_irq irq;
68 qemu_irq smi_irq;
69 int kvm_enabled;
70 Notifier machine_ready;
71
72 /* for pci hotplug */
73 ACPIGPE gpe;
74 struct pci_status pci0_status;
75 uint32_t pci0_hotplug_enable;
76 } PIIX4PMState;
77
78 static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s);
79
80 #define ACPI_ENABLE 0xf1
81 #define ACPI_DISABLE 0xf0
82
83 static void pm_update_sci(PIIX4PMState *s)
84 {
85 int sci_level, pmsts;
86
87 pmsts = acpi_pm1_evt_get_sts(&s->pm1a, s->tmr.overflow_time);
88 sci_level = (((pmsts & s->pm1a.en) &
89 (ACPI_BITMASK_RT_CLOCK_ENABLE |
90 ACPI_BITMASK_POWER_BUTTON_ENABLE |
91 ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
92 ACPI_BITMASK_TIMER_ENABLE)) != 0) ||
93 (((s->gpe.sts[0] & s->gpe.en[0]) & PIIX4_PCI_HOTPLUG_STATUS) != 0);
94
95 qemu_set_irq(s->irq, sci_level);
96 /* schedule a timer interruption if needed */
97 acpi_pm_tmr_update(&s->tmr, (s->pm1a.en & ACPI_BITMASK_TIMER_ENABLE) &&
98 !(pmsts & ACPI_BITMASK_TIMER_STATUS));
99 }
100
101 static void pm_tmr_timer(ACPIPMTimer *tmr)
102 {
103 PIIX4PMState *s = container_of(tmr, PIIX4PMState, tmr);
104 pm_update_sci(s);
105 }
106
107 static void pm_ioport_write(IORange *ioport, uint64_t addr, unsigned width,
108 uint64_t val)
109 {
110 PIIX4PMState *s = container_of(ioport, PIIX4PMState, ioport);
111
112 if (width != 2) {
113 PIIX4_DPRINTF("PM write port=0x%04x width=%d val=0x%08x\n",
114 (unsigned)addr, width, (unsigned)val);
115 }
116
117 switch(addr) {
118 case 0x00:
119 acpi_pm1_evt_write_sts(&s->pm1a, &s->tmr, val);
120 pm_update_sci(s);
121 break;
122 case 0x02:
123 s->pm1a.en = val;
124 pm_update_sci(s);
125 break;
126 case 0x04:
127 acpi_pm1_cnt_write(&s->pm1a, &s->pm1_cnt, val);
128 break;
129 default:
130 break;
131 }
132 PIIX4_DPRINTF("PM writew port=0x%04x val=0x%04x\n", (unsigned int)addr,
133 (unsigned int)val);
134 }
135
136 static void pm_ioport_read(IORange *ioport, uint64_t addr, unsigned width,
137 uint64_t *data)
138 {
139 PIIX4PMState *s = container_of(ioport, PIIX4PMState, ioport);
140 uint32_t val;
141
142 switch(addr) {
143 case 0x00:
144 val = acpi_pm1_evt_get_sts(&s->pm1a, s->tmr.overflow_time);
145 break;
146 case 0x02:
147 val = s->pm1a.en;
148 break;
149 case 0x04:
150 val = s->pm1_cnt.cnt;
151 break;
152 case 0x08:
153 val = acpi_pm_tmr_get(&s->tmr);
154 break;
155 default:
156 val = 0;
157 break;
158 }
159 PIIX4_DPRINTF("PM readw port=0x%04x val=0x%04x\n", (unsigned int)addr, val);
160 *data = val;
161 }
162
163 static const IORangeOps pm_iorange_ops = {
164 .read = pm_ioport_read,
165 .write = pm_ioport_write,
166 };
167
168 static void apm_ctrl_changed(uint32_t val, void *arg)
169 {
170 PIIX4PMState *s = arg;
171
172 /* ACPI specs 3.0, 4.7.2.5 */
173 acpi_pm1_cnt_update(&s->pm1_cnt, val == ACPI_ENABLE, val == ACPI_DISABLE);
174
175 if (s->dev.config[0x5b] & (1 << 1)) {
176 if (s->smi_irq) {
177 qemu_irq_raise(s->smi_irq);
178 }
179 }
180 }
181
182 static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val)
183 {
184 PIIX4_DPRINTF("ACPI: DBG: 0x%08x\n", val);
185 }
186
187 static void pm_io_space_update(PIIX4PMState *s)
188 {
189 uint32_t pm_io_base;
190
191 if (s->dev.config[0x80] & 1) {
192 pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40));
193 pm_io_base &= 0xffc0;
194
195 /* XXX: need to improve memory and ioport allocation */
196 PIIX4_DPRINTF("PM: mapping to 0x%x\n", pm_io_base);
197 iorange_init(&s->ioport, &pm_iorange_ops, pm_io_base, 64);
198 ioport_register(&s->ioport);
199 }
200 }
201
202 static void pm_write_config(PCIDevice *d,
203 uint32_t address, uint32_t val, int len)
204 {
205 pci_default_write_config(d, address, val, len);
206 if (range_covers_byte(address, len, 0x80))
207 pm_io_space_update((PIIX4PMState *)d);
208 }
209
210 static int vmstate_acpi_post_load(void *opaque, int version_id)
211 {
212 PIIX4PMState *s = opaque;
213
214 pm_io_space_update(s);
215 return 0;
216 }
217
218 #define VMSTATE_GPE_ARRAY(_field, _state) \
219 { \
220 .name = (stringify(_field)), \
221 .version_id = 0, \
222 .num = GPE_LEN, \
223 .info = &vmstate_info_uint16, \
224 .size = sizeof(uint16_t), \
225 .flags = VMS_ARRAY | VMS_POINTER, \
226 .offset = vmstate_offset_pointer(_state, _field, uint8_t), \
227 }
228
229 static const VMStateDescription vmstate_gpe = {
230 .name = "gpe",
231 .version_id = 1,
232 .minimum_version_id = 1,
233 .minimum_version_id_old = 1,
234 .fields = (VMStateField []) {
235 VMSTATE_GPE_ARRAY(sts, ACPIGPE),
236 VMSTATE_GPE_ARRAY(en, ACPIGPE),
237 VMSTATE_END_OF_LIST()
238 }
239 };
240
241 static const VMStateDescription vmstate_pci_status = {
242 .name = "pci_status",
243 .version_id = 1,
244 .minimum_version_id = 1,
245 .minimum_version_id_old = 1,
246 .fields = (VMStateField []) {
247 VMSTATE_UINT32(up, struct pci_status),
248 VMSTATE_UINT32(down, struct pci_status),
249 VMSTATE_END_OF_LIST()
250 }
251 };
252
253 static const VMStateDescription vmstate_acpi = {
254 .name = "piix4_pm",
255 .version_id = 2,
256 .minimum_version_id = 1,
257 .minimum_version_id_old = 1,
258 .post_load = vmstate_acpi_post_load,
259 .fields = (VMStateField []) {
260 VMSTATE_PCI_DEVICE(dev, PIIX4PMState),
261 VMSTATE_UINT16(pm1a.sts, PIIX4PMState),
262 VMSTATE_UINT16(pm1a.en, PIIX4PMState),
263 VMSTATE_UINT16(pm1_cnt.cnt, PIIX4PMState),
264 VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState),
265 VMSTATE_TIMER(tmr.timer, PIIX4PMState),
266 VMSTATE_INT64(tmr.overflow_time, PIIX4PMState),
267 VMSTATE_STRUCT(gpe, PIIX4PMState, 2, vmstate_gpe, ACPIGPE),
268 VMSTATE_STRUCT(pci0_status, PIIX4PMState, 2, vmstate_pci_status,
269 struct pci_status),
270 VMSTATE_END_OF_LIST()
271 }
272 };
273
274 static void piix4_update_hotplug(PIIX4PMState *s)
275 {
276 PCIDevice *dev = &s->dev;
277 BusState *bus = qdev_get_parent_bus(&dev->qdev);
278 DeviceState *qdev, *next;
279
280 s->pci0_hotplug_enable = ~0;
281
282 QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
283 PCIDevice *pdev = PCI_DEVICE(qdev);
284 PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(pdev);
285 int slot = PCI_SLOT(pdev->devfn);
286
287 if (pc->no_hotplug) {
288 s->pci0_hotplug_enable &= ~(1 << slot);
289 }
290 }
291 }
292
293 static void piix4_reset(void *opaque)
294 {
295 PIIX4PMState *s = opaque;
296 uint8_t *pci_conf = s->dev.config;
297
298 pci_conf[0x58] = 0;
299 pci_conf[0x59] = 0;
300 pci_conf[0x5a] = 0;
301 pci_conf[0x5b] = 0;
302
303 if (s->kvm_enabled) {
304 /* Mark SMM as already inited (until KVM supports SMM). */
305 pci_conf[0x5B] = 0x02;
306 }
307 piix4_update_hotplug(s);
308 }
309
310 static void piix4_powerdown(void *opaque, int irq, int power_failing)
311 {
312 PIIX4PMState *s = opaque;
313 ACPIPM1EVT *pm1a = s? &s->pm1a: NULL;
314 ACPIPMTimer *tmr = s? &s->tmr: NULL;
315
316 acpi_pm1_evt_power_down(pm1a, tmr);
317 }
318
319 static void piix4_pm_machine_ready(Notifier *n, void *opaque)
320 {
321 PIIX4PMState *s = container_of(n, PIIX4PMState, machine_ready);
322 uint8_t *pci_conf;
323
324 pci_conf = s->dev.config;
325 pci_conf[0x5f] = (isa_is_ioport_assigned(0x378) ? 0x80 : 0) | 0x10;
326 pci_conf[0x63] = 0x60;
327 pci_conf[0x67] = (isa_is_ioport_assigned(0x3f8) ? 0x08 : 0) |
328 (isa_is_ioport_assigned(0x2f8) ? 0x90 : 0);
329
330 }
331
332 static int piix4_pm_initfn(PCIDevice *dev)
333 {
334 PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev, dev);
335 uint8_t *pci_conf;
336
337 pci_conf = s->dev.config;
338 pci_conf[0x06] = 0x80;
339 pci_conf[0x07] = 0x02;
340 pci_conf[0x09] = 0x00;
341 pci_conf[0x3d] = 0x01; // interrupt pin 1
342
343 pci_conf[0x40] = 0x01; /* PM io base read only bit */
344
345 /* APM */
346 apm_init(&s->apm, apm_ctrl_changed, s);
347
348 register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s);
349
350 if (s->kvm_enabled) {
351 /* Mark SMM as already inited to prevent SMM from running. KVM does not
352 * support SMM mode. */
353 pci_conf[0x5B] = 0x02;
354 }
355
356 /* XXX: which specification is used ? The i82731AB has different
357 mappings */
358 pci_conf[0x90] = s->smb_io_base | 1;
359 pci_conf[0x91] = s->smb_io_base >> 8;
360 pci_conf[0xd2] = 0x09;
361 register_ioport_write(s->smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
362 register_ioport_read(s->smb_io_base, 64, 1, smb_ioport_readb, &s->smb);
363
364 acpi_pm_tmr_init(&s->tmr, pm_tmr_timer);
365 acpi_gpe_init(&s->gpe, GPE_LEN);
366
367 qemu_system_powerdown = *qemu_allocate_irqs(piix4_powerdown, s, 1);
368
369 pm_smbus_init(&s->dev.qdev, &s->smb);
370 s->machine_ready.notify = piix4_pm_machine_ready;
371 qemu_add_machine_init_done_notifier(&s->machine_ready);
372 qemu_register_reset(piix4_reset, s);
373 piix4_acpi_system_hot_add_init(dev->bus, s);
374
375 return 0;
376 }
377
378 i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
379 qemu_irq sci_irq, qemu_irq cmos_s3, qemu_irq smi_irq,
380 int kvm_enabled)
381 {
382 PCIDevice *dev;
383 PIIX4PMState *s;
384
385 dev = pci_create(bus, devfn, "PIIX4_PM");
386 qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
387
388 s = DO_UPCAST(PIIX4PMState, dev, dev);
389 s->irq = sci_irq;
390 acpi_pm1_cnt_init(&s->pm1_cnt, cmos_s3);
391 s->smi_irq = smi_irq;
392 s->kvm_enabled = kvm_enabled;
393
394 qdev_init_nofail(&dev->qdev);
395
396 return s->smb.smbus;
397 }
398
399 static Property piix4_pm_properties[] = {
400 DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0),
401 DEFINE_PROP_END_OF_LIST(),
402 };
403
404 static void piix4_pm_class_init(ObjectClass *klass, void *data)
405 {
406 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
407
408 k->no_hotplug = 1;
409 k->init = piix4_pm_initfn;
410 k->config_write = pm_write_config;
411 k->vendor_id = PCI_VENDOR_ID_INTEL;
412 k->device_id = PCI_DEVICE_ID_INTEL_82371AB_3;
413 k->revision = 0x03;
414 k->class_id = PCI_CLASS_BRIDGE_OTHER;
415 }
416
417 static DeviceInfo piix4_pm_info = {
418 .name = "PIIX4_PM",
419 .desc = "PM",
420 .size = sizeof(PIIX4PMState),
421 .vmsd = &vmstate_acpi,
422 .no_user = 1,
423 .props = piix4_pm_properties,
424 .class_init = piix4_pm_class_init,
425 };
426
427 static void piix4_pm_register(void)
428 {
429 pci_qdev_register(&piix4_pm_info);
430 }
431
432 device_init(piix4_pm_register);
433
434 static uint32_t gpe_readb(void *opaque, uint32_t addr)
435 {
436 PIIX4PMState *s = opaque;
437 uint32_t val = acpi_gpe_ioport_readb(&s->gpe, addr);
438
439 PIIX4_DPRINTF("gpe read %x == %x\n", addr, val);
440 return val;
441 }
442
443 static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
444 {
445 PIIX4PMState *s = opaque;
446
447 acpi_gpe_ioport_writeb(&s->gpe, addr, val);
448 pm_update_sci(s);
449
450 PIIX4_DPRINTF("gpe write %x <== %d\n", addr, val);
451 }
452
453 static uint32_t pcihotplug_read(void *opaque, uint32_t addr)
454 {
455 uint32_t val = 0;
456 struct pci_status *g = opaque;
457 switch (addr) {
458 case PCI_BASE:
459 val = g->up;
460 break;
461 case PCI_BASE + 4:
462 val = g->down;
463 break;
464 default:
465 break;
466 }
467
468 PIIX4_DPRINTF("pcihotplug read %x == %x\n", addr, val);
469 return val;
470 }
471
472 static void pcihotplug_write(void *opaque, uint32_t addr, uint32_t val)
473 {
474 struct pci_status *g = opaque;
475 switch (addr) {
476 case PCI_BASE:
477 g->up = val;
478 break;
479 case PCI_BASE + 4:
480 g->down = val;
481 break;
482 }
483
484 PIIX4_DPRINTF("pcihotplug write %x <== %d\n", addr, val);
485 }
486
487 static uint32_t pciej_read(void *opaque, uint32_t addr)
488 {
489 PIIX4_DPRINTF("pciej read %x\n", addr);
490 return 0;
491 }
492
493 static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
494 {
495 BusState *bus = opaque;
496 DeviceState *qdev, *next;
497 int slot = ffs(val) - 1;
498
499 QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
500 PCIDevice *dev = PCI_DEVICE(qdev);
501 PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
502 if (PCI_SLOT(dev->devfn) == slot && !pc->no_hotplug) {
503 qdev_free(qdev);
504 }
505 }
506
507
508 PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val);
509 }
510
511 static uint32_t pcirmv_read(void *opaque, uint32_t addr)
512 {
513 PIIX4PMState *s = opaque;
514
515 return s->pci0_hotplug_enable;
516 }
517
518 static void pcirmv_write(void *opaque, uint32_t addr, uint32_t val)
519 {
520 return;
521 }
522
523 static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
524 PCIHotplugState state);
525
526 static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
527 {
528 struct pci_status *pci0_status = &s->pci0_status;
529
530 register_ioport_write(GPE_BASE, GPE_LEN, 1, gpe_writeb, s);
531 register_ioport_read(GPE_BASE, GPE_LEN, 1, gpe_readb, s);
532 acpi_gpe_blk(&s->gpe, GPE_BASE);
533
534 register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, pci0_status);
535 register_ioport_read(PCI_BASE, 8, 4, pcihotplug_read, pci0_status);
536
537 register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
538 register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, bus);
539
540 register_ioport_write(PCI_RMV_BASE, 4, 4, pcirmv_write, s);
541 register_ioport_read(PCI_RMV_BASE, 4, 4, pcirmv_read, s);
542
543 pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
544 }
545
546 static void enable_device(PIIX4PMState *s, int slot)
547 {
548 s->gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS;
549 s->pci0_status.up |= (1 << slot);
550 }
551
552 static void disable_device(PIIX4PMState *s, int slot)
553 {
554 s->gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS;
555 s->pci0_status.down |= (1 << slot);
556 }
557
558 static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
559 PCIHotplugState state)
560 {
561 int slot = PCI_SLOT(dev->devfn);
562 PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev,
563 PCI_DEVICE(qdev));
564
565 /* Don't send event when device is enabled during qemu machine creation:
566 * it is present on boot, no hotplug event is necessary. We do send an
567 * event when the device is disabled later. */
568 if (state == PCI_COLDPLUG_ENABLED) {
569 return 0;
570 }
571
572 s->pci0_status.up = 0;
573 s->pci0_status.down = 0;
574 if (state == PCI_HOTPLUG_ENABLED) {
575 enable_device(s, slot);
576 } else {
577 disable_device(s, slot);
578 }
579
580 pm_update_sci(s);
581
582 return 0;
583 }