configure: fix --meson=/path/to/meson
[qemu.git] / hw / mips / fuloong2e.c
1 /*
2 * QEMU fuloong 2e mini pc support
3 *
4 * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
5 * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
6 * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
7 * This code is licensed under the GNU GPL v2.
8 *
9 * Contributions after 2012-01-13 are licensed under the terms of the
10 * GNU GPL, version 2 or (at your option) any later version.
11 */
12
13 /*
14 * Fuloong 2e mini pc is based on ICT/ST Loongson 2e CPU (MIPS III like, 800MHz)
15 * https://www.linux-mips.org/wiki/Fuloong_2E
16 *
17 * Loongson 2e user manual:
18 * http://www.loongsondeveloper.com/doc/Loongson2EUserGuide.pdf
19 */
20
21 #include "qemu/osdep.h"
22 #include "qemu-common.h"
23 #include "qemu/units.h"
24 #include "qapi/error.h"
25 #include "cpu.h"
26 #include "hw/intc/i8259.h"
27 #include "hw/dma/i8257.h"
28 #include "hw/isa/superio.h"
29 #include "net/net.h"
30 #include "hw/boards.h"
31 #include "hw/i2c/smbus_eeprom.h"
32 #include "hw/block/flash.h"
33 #include "hw/mips/mips.h"
34 #include "hw/mips/cpudevs.h"
35 #include "hw/pci/pci.h"
36 #include "qemu/log.h"
37 #include "hw/loader.h"
38 #include "hw/ide/pci.h"
39 #include "elf.h"
40 #include "hw/isa/vt82c686.h"
41 #include "hw/rtc/mc146818rtc.h"
42 #include "hw/timer/i8254.h"
43 #include "exec/address-spaces.h"
44 #include "sysemu/qtest.h"
45 #include "sysemu/reset.h"
46 #include "qemu/error-report.h"
47
48 #define DEBUG_FULOONG2E_INIT
49
50 #define ENVP_ADDR 0x80002000l
51 #define ENVP_NB_ENTRIES 16
52 #define ENVP_ENTRY_SIZE 256
53
54 /* Fuloong 2e has a 512k flash: Winbond W39L040AP70Z */
55 #define BIOS_SIZE (512 * KiB)
56 #define MAX_IDE_BUS 2
57
58 /*
59 * PMON is not part of qemu and released with BSD license, anyone
60 * who want to build a pmon binary please first git-clone the source
61 * from the git repository at:
62 * http://www.loongson.cn/support/git/pmon
63 * Then follow the "Compile Guide" available at:
64 * http://dev.lemote.com/code/pmon
65 *
66 * Notes:
67 * 1, don't use the source at http://dev.lemote.com/http_git/pmon.git
68 * 2, use "Bonito2edev" to replace "dir_corresponding_to_your_target_hardware"
69 * in the "Compile Guide".
70 */
71 #define FULOONG_BIOSNAME "pmon_2e.bin"
72
73 /* PCI SLOT in Fuloong 2e */
74 #define FULOONG2E_VIA_SLOT 5
75 #define FULOONG2E_ATI_SLOT 6
76 #define FULOONG2E_RTL8139_SLOT 7
77
78 static struct _loaderparams {
79 int ram_size;
80 const char *kernel_filename;
81 const char *kernel_cmdline;
82 const char *initrd_filename;
83 } loaderparams;
84
85 static void GCC_FMT_ATTR(3, 4) prom_set(uint32_t *prom_buf, int index,
86 const char *string, ...)
87 {
88 va_list ap;
89 int32_t table_addr;
90
91 if (index >= ENVP_NB_ENTRIES) {
92 return;
93 }
94
95 if (string == NULL) {
96 prom_buf[index] = 0;
97 return;
98 }
99
100 table_addr = sizeof(int32_t) * ENVP_NB_ENTRIES + index * ENVP_ENTRY_SIZE;
101 prom_buf[index] = tswap32(ENVP_ADDR + table_addr);
102
103 va_start(ap, string);
104 vsnprintf((char *)prom_buf + table_addr, ENVP_ENTRY_SIZE, string, ap);
105 va_end(ap);
106 }
107
108 static int64_t load_kernel(CPUMIPSState *env)
109 {
110 int64_t kernel_entry, kernel_high, initrd_size;
111 int index = 0;
112 long kernel_size;
113 ram_addr_t initrd_offset;
114 uint32_t *prom_buf;
115 long prom_size;
116
117 kernel_size = load_elf(loaderparams.kernel_filename, NULL,
118 cpu_mips_kseg0_to_phys, NULL,
119 (uint64_t *)&kernel_entry, NULL,
120 (uint64_t *)&kernel_high, NULL,
121 0, EM_MIPS, 1, 0);
122 if (kernel_size < 0) {
123 error_report("could not load kernel '%s': %s",
124 loaderparams.kernel_filename,
125 load_elf_strerror(kernel_size));
126 exit(1);
127 }
128
129 /* load initrd */
130 initrd_size = 0;
131 initrd_offset = 0;
132 if (loaderparams.initrd_filename) {
133 initrd_size = get_image_size(loaderparams.initrd_filename);
134 if (initrd_size > 0) {
135 initrd_offset = (kernel_high + ~INITRD_PAGE_MASK) &
136 INITRD_PAGE_MASK;
137 if (initrd_offset + initrd_size > ram_size) {
138 error_report("memory too small for initial ram disk '%s'",
139 loaderparams.initrd_filename);
140 exit(1);
141 }
142 initrd_size = load_image_targphys(loaderparams.initrd_filename,
143 initrd_offset,
144 ram_size - initrd_offset);
145 }
146 if (initrd_size == (target_ulong) -1) {
147 error_report("could not load initial ram disk '%s'",
148 loaderparams.initrd_filename);
149 exit(1);
150 }
151 }
152
153 /* Setup prom parameters. */
154 prom_size = ENVP_NB_ENTRIES * (sizeof(int32_t) + ENVP_ENTRY_SIZE);
155 prom_buf = g_malloc(prom_size);
156
157 prom_set(prom_buf, index++, "%s", loaderparams.kernel_filename);
158 if (initrd_size > 0) {
159 prom_set(prom_buf, index++,
160 "rd_start=0x%" PRIx64 " rd_size=%" PRId64 " %s",
161 cpu_mips_phys_to_kseg0(NULL, initrd_offset),
162 initrd_size, loaderparams.kernel_cmdline);
163 } else {
164 prom_set(prom_buf, index++, "%s", loaderparams.kernel_cmdline);
165 }
166
167 /* Setup minimum environment variables */
168 prom_set(prom_buf, index++, "busclock=33000000");
169 prom_set(prom_buf, index++, "cpuclock=100000000");
170 prom_set(prom_buf, index++, "memsize=%"PRIi64, loaderparams.ram_size / MiB);
171 prom_set(prom_buf, index++, "modetty0=38400n8r");
172 prom_set(prom_buf, index++, NULL);
173
174 rom_add_blob_fixed("prom", prom_buf, prom_size,
175 cpu_mips_kseg0_to_phys(NULL, ENVP_ADDR));
176
177 g_free(prom_buf);
178 return kernel_entry;
179 }
180
181 static void write_bootloader(CPUMIPSState *env, uint8_t *base,
182 int64_t kernel_addr)
183 {
184 uint32_t *p;
185
186 /* Small bootloader */
187 p = (uint32_t *)base;
188
189 /* j 0x1fc00040 */
190 stl_p(p++, 0x0bf00010);
191 /* nop */
192 stl_p(p++, 0x00000000);
193
194 /* Second part of the bootloader */
195 p = (uint32_t *)(base + 0x040);
196
197 /* lui a0, 0 */
198 stl_p(p++, 0x3c040000);
199 /* ori a0, a0, 2 */
200 stl_p(p++, 0x34840002);
201 /* lui a1, high(ENVP_ADDR) */
202 stl_p(p++, 0x3c050000 | ((ENVP_ADDR >> 16) & 0xffff));
203 /* ori a1, a0, low(ENVP_ADDR) */
204 stl_p(p++, 0x34a50000 | (ENVP_ADDR & 0xffff));
205 /* lui a2, high(ENVP_ADDR + 8) */
206 stl_p(p++, 0x3c060000 | (((ENVP_ADDR + 8) >> 16) & 0xffff));
207 /* ori a2, a2, low(ENVP_ADDR + 8) */
208 stl_p(p++, 0x34c60000 | ((ENVP_ADDR + 8) & 0xffff));
209 /* lui a3, high(env->ram_size) */
210 stl_p(p++, 0x3c070000 | (loaderparams.ram_size >> 16));
211 /* ori a3, a3, low(env->ram_size) */
212 stl_p(p++, 0x34e70000 | (loaderparams.ram_size & 0xffff));
213 /* lui ra, high(kernel_addr) */
214 stl_p(p++, 0x3c1f0000 | ((kernel_addr >> 16) & 0xffff));
215 /* ori ra, ra, low(kernel_addr) */
216 stl_p(p++, 0x37ff0000 | (kernel_addr & 0xffff));
217 /* jr ra */
218 stl_p(p++, 0x03e00008);
219 /* nop */
220 stl_p(p++, 0x00000000);
221 }
222
223 static void main_cpu_reset(void *opaque)
224 {
225 MIPSCPU *cpu = opaque;
226 CPUMIPSState *env = &cpu->env;
227
228 cpu_reset(CPU(cpu));
229 /* TODO: 2E reset stuff */
230 if (loaderparams.kernel_filename) {
231 env->CP0_Status &= ~((1 << CP0St_BEV) | (1 << CP0St_ERL));
232 }
233 }
234
235 static void vt82c686b_southbridge_init(PCIBus *pci_bus, int slot, qemu_irq intc,
236 I2CBus **i2c_bus, ISABus **p_isa_bus)
237 {
238 qemu_irq *i8259;
239 ISABus *isa_bus;
240 PCIDevice *dev;
241
242 isa_bus = vt82c686b_isa_init(pci_bus, PCI_DEVFN(slot, 0));
243 assert(isa_bus);
244 *p_isa_bus = isa_bus;
245 /* Interrupt controller */
246 /* The 8259 -> IP5 */
247 i8259 = i8259_init(isa_bus, intc);
248 isa_bus_irqs(isa_bus, i8259);
249 /* init other devices */
250 i8254_pit_init(isa_bus, 0x40, 0, NULL);
251 i8257_dma_init(isa_bus, 0);
252 /* Super I/O */
253 isa_create_simple(isa_bus, TYPE_VT82C686B_SUPERIO);
254
255 dev = pci_create_simple(pci_bus, PCI_DEVFN(slot, 1), "via-ide");
256 pci_ide_create_devs(dev);
257
258 pci_create_simple(pci_bus, PCI_DEVFN(slot, 2), "vt82c686b-usb-uhci");
259 pci_create_simple(pci_bus, PCI_DEVFN(slot, 3), "vt82c686b-usb-uhci");
260
261 *i2c_bus = vt82c686b_pm_init(pci_bus, PCI_DEVFN(slot, 4), 0xeee1, NULL);
262
263 /* Audio support */
264 vt82c686b_ac97_init(pci_bus, PCI_DEVFN(slot, 5));
265 vt82c686b_mc97_init(pci_bus, PCI_DEVFN(slot, 6));
266 }
267
268 /* Network support */
269 static void network_init(PCIBus *pci_bus)
270 {
271 int i;
272
273 for (i = 0; i < nb_nics; i++) {
274 NICInfo *nd = &nd_table[i];
275 const char *default_devaddr = NULL;
276
277 if (i == 0 && (!nd->model || strcmp(nd->model, "rtl8139") == 0)) {
278 /* The Fuloong board has a RTL8139 card using PCI SLOT 7 */
279 default_devaddr = "07";
280 }
281
282 pci_nic_init_nofail(nd, pci_bus, "rtl8139", default_devaddr);
283 }
284 }
285
286 static void mips_fuloong2e_init(MachineState *machine)
287 {
288 const char *kernel_filename = machine->kernel_filename;
289 const char *kernel_cmdline = machine->kernel_cmdline;
290 const char *initrd_filename = machine->initrd_filename;
291 char *filename;
292 MemoryRegion *address_space_mem = get_system_memory();
293 MemoryRegion *bios = g_new(MemoryRegion, 1);
294 long bios_size;
295 uint8_t *spd_data;
296 int64_t kernel_entry;
297 PCIDevice *pci_dev;
298 PCIBus *pci_bus;
299 ISABus *isa_bus;
300 I2CBus *smbus;
301 MIPSCPU *cpu;
302 CPUMIPSState *env;
303 DeviceState *dev;
304
305 /* init CPUs */
306 cpu = MIPS_CPU(cpu_create(machine->cpu_type));
307 env = &cpu->env;
308
309 qemu_register_reset(main_cpu_reset, cpu);
310
311 /* TODO: support more than 256M RAM as highmem */
312 if (machine->ram_size != 256 * MiB) {
313 error_report("Invalid RAM size, should be 256MB");
314 exit(EXIT_FAILURE);
315 }
316 memory_region_add_subregion(address_space_mem, 0, machine->ram);
317
318 /* Boot ROM */
319 memory_region_init_rom(bios, NULL, "fuloong2e.bios", BIOS_SIZE,
320 &error_fatal);
321 memory_region_add_subregion(address_space_mem, 0x1fc00000LL, bios);
322
323 /*
324 * We do not support flash operation, just loading pmon.bin as raw BIOS.
325 * Please use -L to set the BIOS path and -bios to set bios name.
326 */
327
328 if (kernel_filename) {
329 loaderparams.ram_size = machine->ram_size;
330 loaderparams.kernel_filename = kernel_filename;
331 loaderparams.kernel_cmdline = kernel_cmdline;
332 loaderparams.initrd_filename = initrd_filename;
333 kernel_entry = load_kernel(env);
334 write_bootloader(env, memory_region_get_ram_ptr(bios), kernel_entry);
335 } else {
336 if (bios_name == NULL) {
337 bios_name = FULOONG_BIOSNAME;
338 }
339 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
340 if (filename) {
341 bios_size = load_image_targphys(filename, 0x1fc00000LL,
342 BIOS_SIZE);
343 g_free(filename);
344 } else {
345 bios_size = -1;
346 }
347
348 if ((bios_size < 0 || bios_size > BIOS_SIZE) &&
349 !kernel_filename && !qtest_enabled()) {
350 error_report("Could not load MIPS bios '%s'", bios_name);
351 exit(1);
352 }
353 }
354
355 /* Init internal devices */
356 cpu_mips_irq_init_cpu(cpu);
357 cpu_mips_clock_init(cpu);
358
359 /* North bridge, Bonito --> IP2 */
360 pci_bus = bonito_init((qemu_irq *)&(env->irq[2]));
361
362 /* South bridge -> IP5 */
363 vt82c686b_southbridge_init(pci_bus, FULOONG2E_VIA_SLOT, env->irq[5],
364 &smbus, &isa_bus);
365
366 /* GPU */
367 if (vga_interface_type != VGA_NONE) {
368 pci_dev = pci_new(-1, "ati-vga");
369 dev = DEVICE(pci_dev);
370 qdev_prop_set_uint32(dev, "vgamem_mb", 16);
371 qdev_prop_set_uint16(dev, "x-device-id", 0x5159);
372 pci_realize_and_unref(pci_dev, pci_bus, &error_fatal);
373 }
374
375 /* Populate SPD eeprom data */
376 spd_data = spd_data_generate(DDR, machine->ram_size);
377 smbus_eeprom_init_one(smbus, 0x50, spd_data);
378
379 mc146818_rtc_init(isa_bus, 2000, NULL);
380
381 /* Network card: RTL8139D */
382 network_init(pci_bus);
383 }
384
385 static void mips_fuloong2e_machine_init(MachineClass *mc)
386 {
387 mc->desc = "Fuloong 2e mini pc";
388 mc->alias = "fulong2e"; /* Incorrect name used up to QEMU 4.2 */
389 mc->init = mips_fuloong2e_init;
390 mc->block_default_type = IF_IDE;
391 mc->default_cpu_type = MIPS_CPU_TYPE_NAME("Loongson-2E");
392 mc->default_ram_size = 256 * MiB;
393 mc->default_ram_id = "fuloong2e.ram";
394 mc->minimum_page_bits = 14;
395 }
396
397 DEFINE_MACHINE("fuloong2e", mips_fuloong2e_machine_init)