PPC: e500mc: add missing IVORs to bitmap
[qemu.git] / hw / omap_gpio.c
1 /*
2 * TI OMAP processors GPIO emulation.
3 *
4 * Copyright (C) 2006-2008 Andrzej Zaborowski <balrog@zabor.org>
5 * Copyright (C) 2007-2009 Nokia Corporation
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 or
10 * (at your option) version 3 of the License.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, see <http://www.gnu.org/licenses/>.
19 */
20
21 #include "hw.h"
22 #include "omap.h"
23 #include "sysbus.h"
24
25 struct omap_gpio_s {
26 qemu_irq irq;
27 qemu_irq handler[16];
28
29 uint16_t inputs;
30 uint16_t outputs;
31 uint16_t dir;
32 uint16_t edge;
33 uint16_t mask;
34 uint16_t ints;
35 uint16_t pins;
36 };
37
38 struct omap_gpif_s {
39 SysBusDevice busdev;
40 MemoryRegion iomem;
41 int mpu_model;
42 void *clk;
43 struct omap_gpio_s omap1;
44 };
45
46 /* General-Purpose I/O of OMAP1 */
47 static void omap_gpio_set(void *opaque, int line, int level)
48 {
49 struct omap_gpio_s *s = &((struct omap_gpif_s *) opaque)->omap1;
50 uint16_t prev = s->inputs;
51
52 if (level)
53 s->inputs |= 1 << line;
54 else
55 s->inputs &= ~(1 << line);
56
57 if (((s->edge & s->inputs & ~prev) | (~s->edge & ~s->inputs & prev)) &
58 (1 << line) & s->dir & ~s->mask) {
59 s->ints |= 1 << line;
60 qemu_irq_raise(s->irq);
61 }
62 }
63
64 static uint64_t omap_gpio_read(void *opaque, target_phys_addr_t addr,
65 unsigned size)
66 {
67 struct omap_gpio_s *s = (struct omap_gpio_s *) opaque;
68 int offset = addr & OMAP_MPUI_REG_MASK;
69
70 if (size != 2) {
71 return omap_badwidth_read16(opaque, addr);
72 }
73
74 switch (offset) {
75 case 0x00: /* DATA_INPUT */
76 return s->inputs & s->pins;
77
78 case 0x04: /* DATA_OUTPUT */
79 return s->outputs;
80
81 case 0x08: /* DIRECTION_CONTROL */
82 return s->dir;
83
84 case 0x0c: /* INTERRUPT_CONTROL */
85 return s->edge;
86
87 case 0x10: /* INTERRUPT_MASK */
88 return s->mask;
89
90 case 0x14: /* INTERRUPT_STATUS */
91 return s->ints;
92
93 case 0x18: /* PIN_CONTROL (not in OMAP310) */
94 OMAP_BAD_REG(addr);
95 return s->pins;
96 }
97
98 OMAP_BAD_REG(addr);
99 return 0;
100 }
101
102 static void omap_gpio_write(void *opaque, target_phys_addr_t addr,
103 uint64_t value, unsigned size)
104 {
105 struct omap_gpio_s *s = (struct omap_gpio_s *) opaque;
106 int offset = addr & OMAP_MPUI_REG_MASK;
107 uint16_t diff;
108 int ln;
109
110 if (size != 2) {
111 return omap_badwidth_write16(opaque, addr, value);
112 }
113
114 switch (offset) {
115 case 0x00: /* DATA_INPUT */
116 OMAP_RO_REG(addr);
117 return;
118
119 case 0x04: /* DATA_OUTPUT */
120 diff = (s->outputs ^ value) & ~s->dir;
121 s->outputs = value;
122 while ((ln = ffs(diff))) {
123 ln --;
124 if (s->handler[ln])
125 qemu_set_irq(s->handler[ln], (value >> ln) & 1);
126 diff &= ~(1 << ln);
127 }
128 break;
129
130 case 0x08: /* DIRECTION_CONTROL */
131 diff = s->outputs & (s->dir ^ value);
132 s->dir = value;
133
134 value = s->outputs & ~s->dir;
135 while ((ln = ffs(diff))) {
136 ln --;
137 if (s->handler[ln])
138 qemu_set_irq(s->handler[ln], (value >> ln) & 1);
139 diff &= ~(1 << ln);
140 }
141 break;
142
143 case 0x0c: /* INTERRUPT_CONTROL */
144 s->edge = value;
145 break;
146
147 case 0x10: /* INTERRUPT_MASK */
148 s->mask = value;
149 break;
150
151 case 0x14: /* INTERRUPT_STATUS */
152 s->ints &= ~value;
153 if (!s->ints)
154 qemu_irq_lower(s->irq);
155 break;
156
157 case 0x18: /* PIN_CONTROL (not in OMAP310 TRM) */
158 OMAP_BAD_REG(addr);
159 s->pins = value;
160 break;
161
162 default:
163 OMAP_BAD_REG(addr);
164 return;
165 }
166 }
167
168 /* *Some* sources say the memory region is 32-bit. */
169 static const MemoryRegionOps omap_gpio_ops = {
170 .read = omap_gpio_read,
171 .write = omap_gpio_write,
172 .endianness = DEVICE_NATIVE_ENDIAN,
173 };
174
175 static void omap_gpio_reset(struct omap_gpio_s *s)
176 {
177 s->inputs = 0;
178 s->outputs = ~0;
179 s->dir = ~0;
180 s->edge = ~0;
181 s->mask = ~0;
182 s->ints = 0;
183 s->pins = ~0;
184 }
185
186 struct omap2_gpio_s {
187 qemu_irq irq[2];
188 qemu_irq wkup;
189 qemu_irq *handler;
190 MemoryRegion iomem;
191
192 uint8_t revision;
193 uint8_t config[2];
194 uint32_t inputs;
195 uint32_t outputs;
196 uint32_t dir;
197 uint32_t level[2];
198 uint32_t edge[2];
199 uint32_t mask[2];
200 uint32_t wumask;
201 uint32_t ints[2];
202 uint32_t debounce;
203 uint8_t delay;
204 };
205
206 struct omap2_gpif_s {
207 SysBusDevice busdev;
208 MemoryRegion iomem;
209 int mpu_model;
210 void *iclk;
211 void *fclk[6];
212 int modulecount;
213 struct omap2_gpio_s *modules;
214 qemu_irq *handler;
215 int autoidle;
216 int gpo;
217 };
218
219 /* General-Purpose Interface of OMAP2/3 */
220 static inline void omap2_gpio_module_int_update(struct omap2_gpio_s *s,
221 int line)
222 {
223 qemu_set_irq(s->irq[line], s->ints[line] & s->mask[line]);
224 }
225
226 static void omap2_gpio_module_wake(struct omap2_gpio_s *s, int line)
227 {
228 if (!(s->config[0] & (1 << 2))) /* ENAWAKEUP */
229 return;
230 if (!(s->config[0] & (3 << 3))) /* Force Idle */
231 return;
232 if (!(s->wumask & (1 << line)))
233 return;
234
235 qemu_irq_raise(s->wkup);
236 }
237
238 static inline void omap2_gpio_module_out_update(struct omap2_gpio_s *s,
239 uint32_t diff)
240 {
241 int ln;
242
243 s->outputs ^= diff;
244 diff &= ~s->dir;
245 while ((ln = ffs(diff))) {
246 ln --;
247 qemu_set_irq(s->handler[ln], (s->outputs >> ln) & 1);
248 diff &= ~(1 << ln);
249 }
250 }
251
252 static void omap2_gpio_module_level_update(struct omap2_gpio_s *s, int line)
253 {
254 s->ints[line] |= s->dir &
255 ((s->inputs & s->level[1]) | (~s->inputs & s->level[0]));
256 omap2_gpio_module_int_update(s, line);
257 }
258
259 static inline void omap2_gpio_module_int(struct omap2_gpio_s *s, int line)
260 {
261 s->ints[0] |= 1 << line;
262 omap2_gpio_module_int_update(s, 0);
263 s->ints[1] |= 1 << line;
264 omap2_gpio_module_int_update(s, 1);
265 omap2_gpio_module_wake(s, line);
266 }
267
268 static void omap2_gpio_set(void *opaque, int line, int level)
269 {
270 struct omap2_gpif_s *p = opaque;
271 struct omap2_gpio_s *s = &p->modules[line >> 5];
272
273 line &= 31;
274 if (level) {
275 if (s->dir & (1 << line) & ((~s->inputs & s->edge[0]) | s->level[1]))
276 omap2_gpio_module_int(s, line);
277 s->inputs |= 1 << line;
278 } else {
279 if (s->dir & (1 << line) & ((s->inputs & s->edge[1]) | s->level[0]))
280 omap2_gpio_module_int(s, line);
281 s->inputs &= ~(1 << line);
282 }
283 }
284
285 static void omap2_gpio_module_reset(struct omap2_gpio_s *s)
286 {
287 s->config[0] = 0;
288 s->config[1] = 2;
289 s->ints[0] = 0;
290 s->ints[1] = 0;
291 s->mask[0] = 0;
292 s->mask[1] = 0;
293 s->wumask = 0;
294 s->dir = ~0;
295 s->level[0] = 0;
296 s->level[1] = 0;
297 s->edge[0] = 0;
298 s->edge[1] = 0;
299 s->debounce = 0;
300 s->delay = 0;
301 }
302
303 static uint32_t omap2_gpio_module_read(void *opaque, target_phys_addr_t addr)
304 {
305 struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque;
306
307 switch (addr) {
308 case 0x00: /* GPIO_REVISION */
309 return s->revision;
310
311 case 0x10: /* GPIO_SYSCONFIG */
312 return s->config[0];
313
314 case 0x14: /* GPIO_SYSSTATUS */
315 return 0x01;
316
317 case 0x18: /* GPIO_IRQSTATUS1 */
318 return s->ints[0];
319
320 case 0x1c: /* GPIO_IRQENABLE1 */
321 case 0x60: /* GPIO_CLEARIRQENABLE1 */
322 case 0x64: /* GPIO_SETIRQENABLE1 */
323 return s->mask[0];
324
325 case 0x20: /* GPIO_WAKEUPENABLE */
326 case 0x80: /* GPIO_CLEARWKUENA */
327 case 0x84: /* GPIO_SETWKUENA */
328 return s->wumask;
329
330 case 0x28: /* GPIO_IRQSTATUS2 */
331 return s->ints[1];
332
333 case 0x2c: /* GPIO_IRQENABLE2 */
334 case 0x70: /* GPIO_CLEARIRQENABLE2 */
335 case 0x74: /* GPIO_SETIREQNEABLE2 */
336 return s->mask[1];
337
338 case 0x30: /* GPIO_CTRL */
339 return s->config[1];
340
341 case 0x34: /* GPIO_OE */
342 return s->dir;
343
344 case 0x38: /* GPIO_DATAIN */
345 return s->inputs;
346
347 case 0x3c: /* GPIO_DATAOUT */
348 case 0x90: /* GPIO_CLEARDATAOUT */
349 case 0x94: /* GPIO_SETDATAOUT */
350 return s->outputs;
351
352 case 0x40: /* GPIO_LEVELDETECT0 */
353 return s->level[0];
354
355 case 0x44: /* GPIO_LEVELDETECT1 */
356 return s->level[1];
357
358 case 0x48: /* GPIO_RISINGDETECT */
359 return s->edge[0];
360
361 case 0x4c: /* GPIO_FALLINGDETECT */
362 return s->edge[1];
363
364 case 0x50: /* GPIO_DEBOUNCENABLE */
365 return s->debounce;
366
367 case 0x54: /* GPIO_DEBOUNCINGTIME */
368 return s->delay;
369 }
370
371 OMAP_BAD_REG(addr);
372 return 0;
373 }
374
375 static void omap2_gpio_module_write(void *opaque, target_phys_addr_t addr,
376 uint32_t value)
377 {
378 struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque;
379 uint32_t diff;
380 int ln;
381
382 switch (addr) {
383 case 0x00: /* GPIO_REVISION */
384 case 0x14: /* GPIO_SYSSTATUS */
385 case 0x38: /* GPIO_DATAIN */
386 OMAP_RO_REG(addr);
387 break;
388
389 case 0x10: /* GPIO_SYSCONFIG */
390 if (((value >> 3) & 3) == 3)
391 fprintf(stderr, "%s: bad IDLEMODE value\n", __FUNCTION__);
392 if (value & 2)
393 omap2_gpio_module_reset(s);
394 s->config[0] = value & 0x1d;
395 break;
396
397 case 0x18: /* GPIO_IRQSTATUS1 */
398 if (s->ints[0] & value) {
399 s->ints[0] &= ~value;
400 omap2_gpio_module_level_update(s, 0);
401 }
402 break;
403
404 case 0x1c: /* GPIO_IRQENABLE1 */
405 s->mask[0] = value;
406 omap2_gpio_module_int_update(s, 0);
407 break;
408
409 case 0x20: /* GPIO_WAKEUPENABLE */
410 s->wumask = value;
411 break;
412
413 case 0x28: /* GPIO_IRQSTATUS2 */
414 if (s->ints[1] & value) {
415 s->ints[1] &= ~value;
416 omap2_gpio_module_level_update(s, 1);
417 }
418 break;
419
420 case 0x2c: /* GPIO_IRQENABLE2 */
421 s->mask[1] = value;
422 omap2_gpio_module_int_update(s, 1);
423 break;
424
425 case 0x30: /* GPIO_CTRL */
426 s->config[1] = value & 7;
427 break;
428
429 case 0x34: /* GPIO_OE */
430 diff = s->outputs & (s->dir ^ value);
431 s->dir = value;
432
433 value = s->outputs & ~s->dir;
434 while ((ln = ffs(diff))) {
435 diff &= ~(1 <<-- ln);
436 qemu_set_irq(s->handler[ln], (value >> ln) & 1);
437 }
438
439 omap2_gpio_module_level_update(s, 0);
440 omap2_gpio_module_level_update(s, 1);
441 break;
442
443 case 0x3c: /* GPIO_DATAOUT */
444 omap2_gpio_module_out_update(s, s->outputs ^ value);
445 break;
446
447 case 0x40: /* GPIO_LEVELDETECT0 */
448 s->level[0] = value;
449 omap2_gpio_module_level_update(s, 0);
450 omap2_gpio_module_level_update(s, 1);
451 break;
452
453 case 0x44: /* GPIO_LEVELDETECT1 */
454 s->level[1] = value;
455 omap2_gpio_module_level_update(s, 0);
456 omap2_gpio_module_level_update(s, 1);
457 break;
458
459 case 0x48: /* GPIO_RISINGDETECT */
460 s->edge[0] = value;
461 break;
462
463 case 0x4c: /* GPIO_FALLINGDETECT */
464 s->edge[1] = value;
465 break;
466
467 case 0x50: /* GPIO_DEBOUNCENABLE */
468 s->debounce = value;
469 break;
470
471 case 0x54: /* GPIO_DEBOUNCINGTIME */
472 s->delay = value;
473 break;
474
475 case 0x60: /* GPIO_CLEARIRQENABLE1 */
476 s->mask[0] &= ~value;
477 omap2_gpio_module_int_update(s, 0);
478 break;
479
480 case 0x64: /* GPIO_SETIRQENABLE1 */
481 s->mask[0] |= value;
482 omap2_gpio_module_int_update(s, 0);
483 break;
484
485 case 0x70: /* GPIO_CLEARIRQENABLE2 */
486 s->mask[1] &= ~value;
487 omap2_gpio_module_int_update(s, 1);
488 break;
489
490 case 0x74: /* GPIO_SETIREQNEABLE2 */
491 s->mask[1] |= value;
492 omap2_gpio_module_int_update(s, 1);
493 break;
494
495 case 0x80: /* GPIO_CLEARWKUENA */
496 s->wumask &= ~value;
497 break;
498
499 case 0x84: /* GPIO_SETWKUENA */
500 s->wumask |= value;
501 break;
502
503 case 0x90: /* GPIO_CLEARDATAOUT */
504 omap2_gpio_module_out_update(s, s->outputs & value);
505 break;
506
507 case 0x94: /* GPIO_SETDATAOUT */
508 omap2_gpio_module_out_update(s, ~s->outputs & value);
509 break;
510
511 default:
512 OMAP_BAD_REG(addr);
513 return;
514 }
515 }
516
517 static uint32_t omap2_gpio_module_readp(void *opaque, target_phys_addr_t addr)
518 {
519 return omap2_gpio_module_read(opaque, addr & ~3) >> ((addr & 3) << 3);
520 }
521
522 static void omap2_gpio_module_writep(void *opaque, target_phys_addr_t addr,
523 uint32_t value)
524 {
525 uint32_t cur = 0;
526 uint32_t mask = 0xffff;
527
528 switch (addr & ~3) {
529 case 0x00: /* GPIO_REVISION */
530 case 0x14: /* GPIO_SYSSTATUS */
531 case 0x38: /* GPIO_DATAIN */
532 OMAP_RO_REG(addr);
533 break;
534
535 case 0x10: /* GPIO_SYSCONFIG */
536 case 0x1c: /* GPIO_IRQENABLE1 */
537 case 0x20: /* GPIO_WAKEUPENABLE */
538 case 0x2c: /* GPIO_IRQENABLE2 */
539 case 0x30: /* GPIO_CTRL */
540 case 0x34: /* GPIO_OE */
541 case 0x3c: /* GPIO_DATAOUT */
542 case 0x40: /* GPIO_LEVELDETECT0 */
543 case 0x44: /* GPIO_LEVELDETECT1 */
544 case 0x48: /* GPIO_RISINGDETECT */
545 case 0x4c: /* GPIO_FALLINGDETECT */
546 case 0x50: /* GPIO_DEBOUNCENABLE */
547 case 0x54: /* GPIO_DEBOUNCINGTIME */
548 cur = omap2_gpio_module_read(opaque, addr & ~3) &
549 ~(mask << ((addr & 3) << 3));
550
551 /* Fall through. */
552 case 0x18: /* GPIO_IRQSTATUS1 */
553 case 0x28: /* GPIO_IRQSTATUS2 */
554 case 0x60: /* GPIO_CLEARIRQENABLE1 */
555 case 0x64: /* GPIO_SETIRQENABLE1 */
556 case 0x70: /* GPIO_CLEARIRQENABLE2 */
557 case 0x74: /* GPIO_SETIREQNEABLE2 */
558 case 0x80: /* GPIO_CLEARWKUENA */
559 case 0x84: /* GPIO_SETWKUENA */
560 case 0x90: /* GPIO_CLEARDATAOUT */
561 case 0x94: /* GPIO_SETDATAOUT */
562 value <<= (addr & 3) << 3;
563 omap2_gpio_module_write(opaque, addr, cur | value);
564 break;
565
566 default:
567 OMAP_BAD_REG(addr);
568 return;
569 }
570 }
571
572 static const MemoryRegionOps omap2_gpio_module_ops = {
573 .old_mmio = {
574 .read = {
575 omap2_gpio_module_readp,
576 omap2_gpio_module_readp,
577 omap2_gpio_module_read,
578 },
579 .write = {
580 omap2_gpio_module_writep,
581 omap2_gpio_module_writep,
582 omap2_gpio_module_write,
583 },
584 },
585 .endianness = DEVICE_NATIVE_ENDIAN,
586 };
587
588 static void omap_gpif_reset(DeviceState *dev)
589 {
590 struct omap_gpif_s *s = FROM_SYSBUS(struct omap_gpif_s,
591 sysbus_from_qdev(dev));
592 omap_gpio_reset(&s->omap1);
593 }
594
595 static void omap2_gpif_reset(DeviceState *dev)
596 {
597 int i;
598 struct omap2_gpif_s *s = FROM_SYSBUS(struct omap2_gpif_s,
599 sysbus_from_qdev(dev));
600 for (i = 0; i < s->modulecount; i++) {
601 omap2_gpio_module_reset(&s->modules[i]);
602 }
603 s->autoidle = 0;
604 s->gpo = 0;
605 }
606
607 static uint64_t omap2_gpif_top_read(void *opaque, target_phys_addr_t addr,
608 unsigned size)
609 {
610 struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque;
611
612 switch (addr) {
613 case 0x00: /* IPGENERICOCPSPL_REVISION */
614 return 0x18;
615
616 case 0x10: /* IPGENERICOCPSPL_SYSCONFIG */
617 return s->autoidle;
618
619 case 0x14: /* IPGENERICOCPSPL_SYSSTATUS */
620 return 0x01;
621
622 case 0x18: /* IPGENERICOCPSPL_IRQSTATUS */
623 return 0x00;
624
625 case 0x40: /* IPGENERICOCPSPL_GPO */
626 return s->gpo;
627
628 case 0x50: /* IPGENERICOCPSPL_GPI */
629 return 0x00;
630 }
631
632 OMAP_BAD_REG(addr);
633 return 0;
634 }
635
636 static void omap2_gpif_top_write(void *opaque, target_phys_addr_t addr,
637 uint64_t value, unsigned size)
638 {
639 struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque;
640
641 switch (addr) {
642 case 0x00: /* IPGENERICOCPSPL_REVISION */
643 case 0x14: /* IPGENERICOCPSPL_SYSSTATUS */
644 case 0x18: /* IPGENERICOCPSPL_IRQSTATUS */
645 case 0x50: /* IPGENERICOCPSPL_GPI */
646 OMAP_RO_REG(addr);
647 break;
648
649 case 0x10: /* IPGENERICOCPSPL_SYSCONFIG */
650 if (value & (1 << 1)) /* SOFTRESET */
651 omap2_gpif_reset(&s->busdev.qdev);
652 s->autoidle = value & 1;
653 break;
654
655 case 0x40: /* IPGENERICOCPSPL_GPO */
656 s->gpo = value & 1;
657 break;
658
659 default:
660 OMAP_BAD_REG(addr);
661 return;
662 }
663 }
664
665 static const MemoryRegionOps omap2_gpif_top_ops = {
666 .read = omap2_gpif_top_read,
667 .write = omap2_gpif_top_write,
668 .endianness = DEVICE_NATIVE_ENDIAN,
669 };
670
671 static int omap_gpio_init(SysBusDevice *dev)
672 {
673 struct omap_gpif_s *s = FROM_SYSBUS(struct omap_gpif_s, dev);
674 if (!s->clk) {
675 hw_error("omap-gpio: clk not connected\n");
676 }
677 qdev_init_gpio_in(&dev->qdev, omap_gpio_set, 16);
678 qdev_init_gpio_out(&dev->qdev, s->omap1.handler, 16);
679 sysbus_init_irq(dev, &s->omap1.irq);
680 memory_region_init_io(&s->iomem, &omap_gpio_ops, &s->omap1,
681 "omap.gpio", 0x1000);
682 sysbus_init_mmio(dev, &s->iomem);
683 return 0;
684 }
685
686 static int omap2_gpio_init(SysBusDevice *dev)
687 {
688 int i;
689 struct omap2_gpif_s *s = FROM_SYSBUS(struct omap2_gpif_s, dev);
690 if (!s->iclk) {
691 hw_error("omap2-gpio: iclk not connected\n");
692 }
693 if (s->mpu_model < omap3430) {
694 s->modulecount = (s->mpu_model < omap2430) ? 4 : 5;
695 memory_region_init_io(&s->iomem, &omap2_gpif_top_ops, s,
696 "omap2.gpio", 0x1000);
697 sysbus_init_mmio(dev, &s->iomem);
698 } else {
699 s->modulecount = 6;
700 }
701 s->modules = g_malloc0(s->modulecount * sizeof(struct omap2_gpio_s));
702 s->handler = g_malloc0(s->modulecount * 32 * sizeof(qemu_irq));
703 qdev_init_gpio_in(&dev->qdev, omap2_gpio_set, s->modulecount * 32);
704 qdev_init_gpio_out(&dev->qdev, s->handler, s->modulecount * 32);
705 for (i = 0; i < s->modulecount; i++) {
706 struct omap2_gpio_s *m = &s->modules[i];
707 if (!s->fclk[i]) {
708 hw_error("omap2-gpio: fclk%d not connected\n", i);
709 }
710 m->revision = (s->mpu_model < omap3430) ? 0x18 : 0x25;
711 m->handler = &s->handler[i * 32];
712 sysbus_init_irq(dev, &m->irq[0]); /* mpu irq */
713 sysbus_init_irq(dev, &m->irq[1]); /* dsp irq */
714 sysbus_init_irq(dev, &m->wkup);
715 memory_region_init_io(&m->iomem, &omap2_gpio_module_ops, m,
716 "omap.gpio-module", 0x1000);
717 sysbus_init_mmio(dev, &m->iomem);
718 }
719 return 0;
720 }
721
722 /* Using qdev pointer properties for the clocks is not ideal.
723 * qdev should support a generic means of defining a 'port' with
724 * an arbitrary interface for connecting two devices. Then we
725 * could reframe the omap clock API in terms of clock ports,
726 * and get some type safety. For now the best qdev provides is
727 * passing an arbitrary pointer.
728 * (It's not possible to pass in the string which is the clock
729 * name, because this device does not have the necessary information
730 * (ie the struct omap_mpu_state_s*) to do the clockname to pointer
731 * translation.)
732 */
733
734 static Property omap_gpio_properties[] = {
735 DEFINE_PROP_INT32("mpu_model", struct omap_gpif_s, mpu_model, 0),
736 DEFINE_PROP_PTR("clk", struct omap_gpif_s, clk),
737 DEFINE_PROP_END_OF_LIST(),
738 };
739
740 static void omap_gpio_class_init(ObjectClass *klass, void *data)
741 {
742 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
743
744 k->init = omap_gpio_init;
745 }
746
747 static DeviceInfo omap_gpio_info = {
748 .name = "omap-gpio",
749 .size = sizeof(struct omap_gpif_s),
750 .reset = omap_gpif_reset,
751 .props = omap_gpio_properties,
752 .class_init = omap_gpio_class_init,
753 };
754
755 static Property omap2_gpio_properties[] = {
756 DEFINE_PROP_INT32("mpu_model", struct omap2_gpif_s, mpu_model, 0),
757 DEFINE_PROP_PTR("iclk", struct omap2_gpif_s, iclk),
758 DEFINE_PROP_PTR("fclk0", struct omap2_gpif_s, fclk[0]),
759 DEFINE_PROP_PTR("fclk1", struct omap2_gpif_s, fclk[1]),
760 DEFINE_PROP_PTR("fclk2", struct omap2_gpif_s, fclk[2]),
761 DEFINE_PROP_PTR("fclk3", struct omap2_gpif_s, fclk[3]),
762 DEFINE_PROP_PTR("fclk4", struct omap2_gpif_s, fclk[4]),
763 DEFINE_PROP_PTR("fclk5", struct omap2_gpif_s, fclk[5]),
764 DEFINE_PROP_END_OF_LIST(),
765 };
766
767 static void omap2_gpio_class_init(ObjectClass *klass, void *data)
768 {
769 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
770
771 k->init = omap2_gpio_init;
772 }
773
774 static DeviceInfo omap2_gpio_info = {
775 .name = "omap2-gpio",
776 .size = sizeof(struct omap2_gpif_s),
777 .reset = omap2_gpif_reset,
778 .props = omap2_gpio_properties,
779 .class_init = omap2_gpio_class_init,
780 };
781
782 static void omap_gpio_register_device(void)
783 {
784 sysbus_register_withprop(&omap_gpio_info);
785 sysbus_register_withprop(&omap2_gpio_info);
786 }
787
788 device_init(omap_gpio_register_device)