ppc/pnv: Add a HIOMAP erase command
[qemu.git] / include / hw / misc / tz-ppc.h
1 /*
2 * ARM TrustZone peripheral protection controller emulation
3 *
4 * Copyright (c) 2018 Linaro Limited
5 * Written by Peter Maydell
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 or
9 * (at your option) any later version.
10 */
11
12 /* This is a model of the TrustZone peripheral protection controller (PPC).
13 * It is documented in the ARM CoreLink SIE-200 System IP for Embedded TRM
14 * (DDI 0571G):
15 * https://developer.arm.com/products/architecture/m-profile/docs/ddi0571/g
16 *
17 * The PPC sits in front of peripherals and allows secure software to
18 * configure it to either pass through or reject transactions.
19 * Rejected transactions may be configured to either be aborted, or to
20 * behave as RAZ/WI. An interrupt can be signalled for a rejected transaction.
21 *
22 * The PPC has no register interface -- it is configured purely by a
23 * collection of input signals from other hardware in the system. Typically
24 * they are either hardwired or exposed in an ad-hoc register interface by
25 * the SoC that uses the PPC.
26 *
27 * This QEMU model can be used to model either the AHB5 or APB4 TZ PPC,
28 * since the only difference between them is that the AHB version has a
29 * "default" port which has no security checks applied. In QEMU the default
30 * port can be emulated simply by wiring its downstream devices directly
31 * into the parent address space, since the PPC does not need to intercept
32 * transactions there.
33 *
34 * In the hardware, selection of which downstream port to use is done by
35 * the user's decode logic asserting one of the hsel[] signals. In QEMU,
36 * we provide 16 MMIO regions, one per port, and the user maps these into
37 * the desired addresses to implement the address decode.
38 *
39 * QEMU interface:
40 * + sysbus MMIO regions 0..15: MemoryRegions defining the upstream end
41 * of each of the 16 ports of the PPC. When a port is unused (i.e. no
42 * downstream MemoryRegion is connected to it) at the end of the 0..15
43 * range then no sysbus MMIO region is created for its upstream. When an
44 * unused port lies in the middle of the range with other used ports at
45 * higher port numbers, a dummy MMIO region is created to ensure that
46 * port N's upstream is always sysbus MMIO region N. Dummy regions should
47 * not be mapped, and will assert if any access is made to them.
48 * + Property "port[0..15]": MemoryRegion defining the downstream device(s)
49 * for each of the 16 ports of the PPC
50 * + Named GPIO inputs "cfg_nonsec[0..15]": set to 1 if the port should be
51 * accessible to NonSecure transactions
52 * + Named GPIO inputs "cfg_ap[0..15]": set to 1 if the port should be
53 * accessible to non-privileged transactions
54 * + Named GPIO input "cfg_sec_resp": set to 1 if a rejected transaction should
55 * result in a transaction error, or 0 for the transaction to RAZ/WI
56 * + Named GPIO input "irq_enable": set to 1 to enable interrupts
57 * + Named GPIO input "irq_clear": set to 1 to clear a pending interrupt
58 * + Named GPIO output "irq": set for a transaction-failed interrupt
59 * + Property "NONSEC_MASK": if a bit is set in this mask then accesses to
60 * the associated port do not have the TZ security check performed. (This
61 * corresponds to the hardware allowing this to be set as a Verilog
62 * parameter.)
63 */
64
65 #ifndef TZ_PPC_H
66 #define TZ_PPC_H
67
68 #include "hw/sysbus.h"
69
70 #define TYPE_TZ_PPC "tz-ppc"
71 #define TZ_PPC(obj) OBJECT_CHECK(TZPPC, (obj), TYPE_TZ_PPC)
72
73 #define TZ_NUM_PORTS 16
74
75 typedef struct TZPPC TZPPC;
76
77 typedef struct TZPPCPort {
78 TZPPC *ppc;
79 MemoryRegion upstream;
80 AddressSpace downstream_as;
81 MemoryRegion *downstream;
82 } TZPPCPort;
83
84 struct TZPPC {
85 /*< private >*/
86 SysBusDevice parent_obj;
87
88 /*< public >*/
89
90 /* State: these just track the values of our input signals */
91 bool cfg_nonsec[TZ_NUM_PORTS];
92 bool cfg_ap[TZ_NUM_PORTS];
93 bool cfg_sec_resp;
94 bool irq_enable;
95 bool irq_clear;
96 /* State: are we asserting irq ? */
97 bool irq_status;
98
99 qemu_irq irq;
100
101 /* Properties */
102 uint32_t nonsec_mask;
103
104 TZPPCPort port[TZ_NUM_PORTS];
105 };
106
107 #endif