Merge tag 'pull-ppc-20211129' of https://github.com/legoater/qemu into staging
[qemu.git] / linux-headers / linux / vhost.h
1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2 #ifndef _LINUX_VHOST_H
3 #define _LINUX_VHOST_H
4 /* Userspace interface for in-kernel virtio accelerators. */
5
6 /* vhost is used to reduce the number of system calls involved in virtio.
7 *
8 * Existing virtio net code is used in the guest without modification.
9 *
10 * This header includes interface used by userspace hypervisor for
11 * device configuration.
12 */
13
14 #include <linux/vhost_types.h>
15 #include <linux/types.h>
16 #include <linux/ioctl.h>
17
18 #define VHOST_FILE_UNBIND -1
19
20 /* ioctls */
21
22 #define VHOST_VIRTIO 0xAF
23
24 /* Features bitmask for forward compatibility. Transport bits are used for
25 * vhost specific features. */
26 #define VHOST_GET_FEATURES _IOR(VHOST_VIRTIO, 0x00, __u64)
27 #define VHOST_SET_FEATURES _IOW(VHOST_VIRTIO, 0x00, __u64)
28
29 /* Set current process as the (exclusive) owner of this file descriptor. This
30 * must be called before any other vhost command. Further calls to
31 * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */
32 #define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)
33 /* Give up ownership, and reset the device to default values.
34 * Allows subsequent call to VHOST_OWNER_SET to succeed. */
35 #define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)
36
37 /* Set up/modify memory layout */
38 #define VHOST_SET_MEM_TABLE _IOW(VHOST_VIRTIO, 0x03, struct vhost_memory)
39
40 /* Write logging setup. */
41 /* Memory writes can optionally be logged by setting bit at an offset
42 * (calculated from the physical address) from specified log base.
43 * The bit is set using an atomic 32 bit operation. */
44 /* Set base address for logging. */
45 #define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
46 /* Specify an eventfd file descriptor to signal on log write. */
47 #define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)
48
49 /* Ring setup. */
50 /* Set number of descriptors in ring. This parameter can not
51 * be modified while ring is running (bound to a device). */
52 #define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state)
53 /* Set addresses for the ring. */
54 #define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr)
55 /* Base value where queue looks for available descriptors */
56 #define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
57 /* Get accessor: reads index, writes value in num */
58 #define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
59
60 /* Set the vring byte order in num. Valid values are VHOST_VRING_LITTLE_ENDIAN
61 * or VHOST_VRING_BIG_ENDIAN (other values return -EINVAL).
62 * The byte order cannot be changed while the device is active: trying to do so
63 * returns -EBUSY.
64 * This is a legacy only API that is simply ignored when VIRTIO_F_VERSION_1 is
65 * set.
66 * Not all kernel configurations support this ioctl, but all configurations that
67 * support SET also support GET.
68 */
69 #define VHOST_VRING_LITTLE_ENDIAN 0
70 #define VHOST_VRING_BIG_ENDIAN 1
71 #define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state)
72 #define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state)
73
74 /* The following ioctls use eventfd file descriptors to signal and poll
75 * for events. */
76
77 /* Set eventfd to poll for added buffers */
78 #define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file)
79 /* Set eventfd to signal when buffers have beed used */
80 #define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
81 /* Set eventfd to signal an error */
82 #define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
83 /* Set busy loop timeout (in us) */
84 #define VHOST_SET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x23, \
85 struct vhost_vring_state)
86 /* Get busy loop timeout (in us) */
87 #define VHOST_GET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x24, \
88 struct vhost_vring_state)
89
90 /* Set or get vhost backend capability */
91
92 /* Use message type V2 */
93 #define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1
94 /* IOTLB can accept batching hints */
95 #define VHOST_BACKEND_F_IOTLB_BATCH 0x2
96
97 #define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64)
98 #define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64)
99
100 /* VHOST_NET specific defines */
101
102 /* Attach virtio net ring to a raw socket, or tap device.
103 * The socket must be already bound to an ethernet device, this device will be
104 * used for transmit. Pass fd -1 to unbind from the socket and the transmit
105 * device. This can be used to stop the ring (e.g. for migration). */
106 #define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
107
108 /* VHOST_SCSI specific defines */
109
110 #define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target)
111 #define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target)
112 /* Changing this breaks userspace. */
113 #define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int)
114 /* Set and get the events missed flag */
115 #define VHOST_SCSI_SET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x43, __u32)
116 #define VHOST_SCSI_GET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x44, __u32)
117
118 /* VHOST_VSOCK specific defines */
119
120 #define VHOST_VSOCK_SET_GUEST_CID _IOW(VHOST_VIRTIO, 0x60, __u64)
121 #define VHOST_VSOCK_SET_RUNNING _IOW(VHOST_VIRTIO, 0x61, int)
122
123 /* VHOST_VDPA specific defines */
124
125 /* Get the device id. The device ids follow the same definition of
126 * the device id defined in virtio-spec.
127 */
128 #define VHOST_VDPA_GET_DEVICE_ID _IOR(VHOST_VIRTIO, 0x70, __u32)
129 /* Get and set the status. The status bits follow the same definition
130 * of the device status defined in virtio-spec.
131 */
132 #define VHOST_VDPA_GET_STATUS _IOR(VHOST_VIRTIO, 0x71, __u8)
133 #define VHOST_VDPA_SET_STATUS _IOW(VHOST_VIRTIO, 0x72, __u8)
134 /* Get and set the device config. The device config follows the same
135 * definition of the device config defined in virtio-spec.
136 */
137 #define VHOST_VDPA_GET_CONFIG _IOR(VHOST_VIRTIO, 0x73, \
138 struct vhost_vdpa_config)
139 #define VHOST_VDPA_SET_CONFIG _IOW(VHOST_VIRTIO, 0x74, \
140 struct vhost_vdpa_config)
141 /* Enable/disable the ring. */
142 #define VHOST_VDPA_SET_VRING_ENABLE _IOW(VHOST_VIRTIO, 0x75, \
143 struct vhost_vring_state)
144 /* Get the max ring size. */
145 #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16)
146
147 /* Set event fd for config interrupt*/
148 #define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int)
149
150 /* Get the valid iova range */
151 #define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \
152 struct vhost_vdpa_iova_range)
153 #endif