qemu.git
2 years agotarget/rx: TCG helpers
Yoshinori Sato [Mon, 21 Jan 2019 13:17:35 +0000 (05:17 -0800)] 
target/rx: TCG helpers

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Removed tlb_fill, extracted from patch of Yoshinori Sato
 'Convert to CPUClass::tlb_fill']
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200224141923.82118-6-ysato@users.sourceforge.jp>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2 years agotarget/rx: TCG translation
Yoshinori Sato [Mon, 21 Jan 2019 13:24:40 +0000 (05:24 -0800)] 
target/rx: TCG translation

This part only supported RXv1 instructions.

Instruction manual:
  https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01us0032ej0120_rxsm.pdf

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200224141923.82118-5-ysato@users.sourceforge.jp>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2 years agoMAINTAINERS: Add entry for the Renesas RX architecture
Yoshinori Sato [Mon, 21 Jan 2019 13:20:54 +0000 (05:20 -0800)] 
MAINTAINERS: Add entry for the Renesas RX architecture

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200224141923.82118-2-ysato@users.sourceforge.jp>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2 years agohw/registerfields.h: Add 8bit and 16bit register macros
Yoshinori Sato [Mon, 25 Mar 2019 09:03:47 +0000 (02:03 -0700)] 
hw/registerfields.h: Add 8bit and 16bit register macros

Some RX peripheral use 8bit and 16bit registers.
Add the 8bit and 16bit APIs.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200224141923.82118-4-ysato@users.sourceforge.jp>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2 years agoMerge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request...
Peter Maydell [Thu, 19 Mar 2020 14:22:46 +0000 (14:22 +0000)] 
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging

x86 and machine queue for 5.0 soft freeze

Bug fixes:
* memory encryption: Disable mem merge
  (Dr. David Alan Gilbert)

Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)

Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
  (Peter Maydell)

# gpg: Signature made Wed 18 Mar 2020 01:16:43 GMT
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-and-machine-pull-request:
  hw/i386: Rename apicid_from_topo_ids to x86_apicid_from_topo_ids
  hw/i386: Update structures to save the number of nodes per package
  hw/i386: Remove unnecessary initialization in x86_cpu_new
  machine: Add SMP Sockets in CpuTopology
  hw/i386: Consolidate topology functions
  hw/i386: Introduce X86CPUTopoInfo to contain topology info
  cpu: Use DeviceClass reset instead of a special CPUClass reset
  machine/memory encryption: Disable mem merge
  hw/i386: Rename X86CPUTopoInfo structure to X86CPUTopoIDs
  i386: Add 2nd Generation AMD EPYC processors
  i386: Add missing cpu feature bits in EPYC model
  target/i386: Add new property note to versioned CPU models
  target/i386: Add Denverton-v2 (no MPX) CPU model

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 years agoMerge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into...
Peter Maydell [Thu, 19 Mar 2020 12:33:50 +0000 (12:33 +0000)] 
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging

Python and tests (mostly acceptance) patches 2020-03-17

# gpg: Signature made Wed 18 Mar 2020 00:16:03 GMT
# gpg:                using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F  E9BB 657E 8D33 A5F2 09F3

* remotes/cleber/tags/python-next-pull-request:
  tests/docker: make "buildah bud" output similar to "docker build"
  tests/docker: add CentOS 8 Dockerfile
  Acceptance tests: add make targets to download images
  Acceptance test: add "boot_linux" tests
  Acceptance tests: introduce BUILD_DIR and SOURCE_DIR
  python/qemu/qmp.py: QMP debug with VM label

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 years agoMerge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging
Peter Maydell [Thu, 19 Mar 2020 11:14:24 +0000 (11:14 +0000)] 
Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging

Pull request

# gpg: Signature made Tue 17 Mar 2020 23:22:33 GMT
# gpg:                using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/ide-pull-request:
  hw/ide: Remove unneeded inclusion of hw/ide.h
  hw/ide: Move MAX_IDE_DEVS define to hw/ide/internal.h
  hw/ide: Do ide_drive_get() within pci_ide_create_devs()
  hw/ide/pci.c: Coding style update to fix checkpatch errors
  hw/ide: Remove now unneded #include "hw/pci/pci.h" from hw/ide.h
  hw/ide: Get rid of piix4_init function
  hw/isa/piix4.c: Introduce variable to store devfn
  hw/ide: Get rid of piix3_init functions
  hd-geo-test: Clean up use of buf[] in create_qcow2_with_mbr()
  via-ide: always use legacy IRQ 14/15 routing
  via-ide: allow guests to write to PCI_CLASS_PROG
  via-ide: initialise IDE controller in legacy mode
  via-ide: ensure that PCI_INTERRUPT_LINE is hard-wired to its default value
  pci: Honour wmask when resetting PCI_INTERRUPT_LINE
  ide/via: Get rid of via_ide_init()
  via-ide: move registration of VMStateDescription to DeviceClass
  cmd646: remove unused pci_cmd646_ide_init() function
  dp264: use pci_create_simple() to initialise the cmd646 device
  cmd646: register vmstate_ide_pci VMStateDescription in DeviceClass
  cmd646: register cmd646_reset() function in DeviceClass

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 years agoMerge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-03-17' into staging
Peter Maydell [Thu, 19 Mar 2020 10:18:07 +0000 (10:18 +0000)] 
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-03-17' into staging

QAPI patches for 2020-03-17

# gpg: Signature made Tue 17 Mar 2020 20:50:54 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2020-03-17: (30 commits)
  net: Track netdevs in NetClientState rather than QemuOpt
  net: Complete qapi-fication of netdev_add
  qmp: constify QmpCommand and list
  qapi: Mark deprecated QMP parts with feature 'deprecated'
  qapi: New special feature flag "deprecated"
  qapi: Replace qmp_dispatch()'s TODO comment by an explanation
  qapi: Simplify how qmp_dispatch() gets the request ID
  qapi: Simplify how qmp_dispatch() deals with QCO_NO_SUCCESS_RESP
  qapi: Inline do_qmp_dispatch() into qmp_dispatch()
  qapi: Add feature flags to struct members
  qapi/schema: Call QAPIDoc.connect_member() in just one place
  qapi/schema: Rename QAPISchemaObjectType{Variant,Variants}
  qapi/schema: Reorder classes so related ones are together
  qapi/schema: Change _make_features() to a take feature list
  qapi/introspect: Factor out _make_tree()
  qapi/introspect: Rename *qlit* to reduce confusion
  qapi: Consistently put @features parameter right after @ifcond
  qapi: Add feature flags to remaining definitions
  qapi/schema: Clean up around QAPISchemaEntity.connect_doc()
  tests/test-qmp-event: Check event is actually emitted
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 years agoMerge remote-tracking branch 'remotes/rth/tags/pull-tcg-20200317' into staging
Peter Maydell [Wed, 18 Mar 2020 22:15:59 +0000 (22:15 +0000)] 
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20200317' into staging

Fix tcg/i386 bug vs sari_vec.
Fix tcg-runtime-gvec.c vs i386 without avx.

# gpg: Signature made Tue 17 Mar 2020 18:58:14 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20200317:
  tcg: Remove tcg-runtime-gvec.c DO_CMP0
  tcg: Tidy tcg-runtime-gvec.c DUP*
  tcg: Tidy tcg-runtime-gvec.c types
  tcg: Remove CONFIG_VECTOR16
  tcg/i386: Bound shift count expanding sari_vec

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 years agoMerge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-gdbstub-170320...
Peter Maydell [Wed, 18 Mar 2020 20:25:23 +0000 (20:25 +0000)] 
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1' into staging

Testing and gdbstub updates:

  - docker updates for VirGL
  - re-factor gdbstub for static GDBState
  - re-factor gdbstub for dynamic arrays
  - add SVE support to arm gdbstub
  - add some guest debug tests to check-tcg
  - add aarch64 userspace register tests
  - remove packet size limit to gdbstub
  - simplify gdbstub monitor code
  - report vContSupported in gdbstub to use proper single-step

# gpg: Signature made Tue 17 Mar 2020 17:47:46 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1: (28 commits)
  gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdb
  gdbstub: do not split gdb_monitor_write payload
  gdbstub: change GDBState.last_packet to GByteArray
  tests/tcg/aarch64: add test-sve-ioctl guest-debug test
  tests/tcg/aarch64: add SVE iotcl test
  tests/tcg/aarch64: add a gdbstub testcase for SVE registers
  tests/guest-debug: add a simple test runner
  configure: allow user to specify what gdb to use
  tests/tcg/aarch64: userspace system register test
  target/arm: don't bother with id_aa64pfr0_read for USER_ONLY
  target/arm: generate xml description of our SVE registers
  target/arm: default SVE length to 64 bytes for linux-user
  target/arm: explicitly encode regnum in our XML
  target/arm: prepare for multiple dynamic XMLs
  gdbstub: extend GByteArray to read register helpers
  target/i386: use gdb_get_reg helpers
  target/m68k: use gdb_get_reg helpers
  target/arm: use gdb_get_reg helpers
  gdbstub: add helper for 128 bit registers
  gdbstub: move mem_buf to GDBState and use GByteArray
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 years agoMerge remote-tracking branch 'remotes/armbru/tags/pull-error-2020-03-17' into staging
Peter Maydell [Wed, 18 Mar 2020 17:57:40 +0000 (17:57 +0000)] 
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2020-03-17' into staging

Error reporting patches for 2020-03-17

# gpg: Signature made Tue 17 Mar 2020 16:30:49 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-error-2020-03-17:
  hw/sd/ssi-sd: fix error handling in ssi_sd_realize
  xen-block: Use one Error * variable instead of two
  hw/misc/ivshmem: Use one Error * variable instead of two
  Use &error_abort instead of separate assert()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 years agoMerge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200317' into staging
Peter Maydell [Wed, 18 Mar 2020 15:07:57 +0000 (15:07 +0000)] 
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200317' into staging

ppc patch queue 2020-03-17

Here's my final pull request for the qemu-5.0 soft freeze.  Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.

Highlights are:
 * Numerous fixes for the FWNMI feature
 * A handful of cleanups to the device tree construction code
 * Numerous fixes for the spapr-vscsi device
 * A number of fixes and cleanups for real mode (MMU off) softmmu
   handling
 * Fixes for handling of the PAPR RMA
 * Better handling of hotplug/unplug events during boot
 * Assorted other fixes

# gpg: Signature made Tue 17 Mar 2020 09:55:07 GMT
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-5.0-20200317: (45 commits)
  pseries: Update SLOF firmware image
  ppc/spapr: Ignore common "ibm,nmi-interlock" Linux bug
  ppc/spapr: Implement FWNMI System Reset delivery
  target/ppc: allow ppc_cpu_do_system_reset to take an alternate vector
  ppc/spapr: Allow FWNMI on TCG
  ppc/spapr: Fix FWNMI machine check interrupt delivery
  ppc/spapr: Add FWNMI System Reset state
  ppc/spapr: Change FWNMI names
  ppc/spapr: Fix FWNMI machine check failure handling
  spapr: Rename DT functions to newer naming convention
  spapr: Move creation of ibm,architecture-vec-5 property
  spapr: Move creation of ibm,dynamic-reconfiguration-memory dt node
  spapr/rtas: Reserve space for RTAS blob and log
  pseries: Update SLOF firmware image
  ppc/spapr: Move GPRs setup to one place
  target/ppc: Fix rlwinm on ppc64
  spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest
  hw/scsi/spapr_vscsi: Convert debug fprintf() to trace event
  hw/scsi/spapr_vscsi: Prevent buffer overflow
  hw/scsi/spapr_vscsi: Do not mix SRP IU size with DMA buffer size
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 years agohw/i386: Rename apicid_from_topo_ids to x86_apicid_from_topo_ids
Babu Moger [Wed, 11 Mar 2020 22:53:27 +0000 (17:53 -0500)] 
hw/i386: Rename apicid_from_topo_ids to x86_apicid_from_topo_ids

For consistency rename apicid_from_topo_ids to x86_apicid_from_topo_ids.
No functional change.

Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396720748.58170.5335409429390890145.stgit@naples-babu.amd.com>

2 years agohw/i386: Update structures to save the number of nodes per package
Babu Moger [Wed, 11 Mar 2020 22:53:20 +0000 (17:53 -0500)] 
hw/i386: Update structures to save the number of nodes per package

Update structures X86CPUTopoIDs and CPUX86State to hold the number of
nodes per package. This is required to build EPYC mode topology.

Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396720035.58170.1973738805301006456.stgit@naples-babu.amd.com>

2 years agohw/i386: Remove unnecessary initialization in x86_cpu_new
Babu Moger [Wed, 11 Mar 2020 22:53:13 +0000 (17:53 -0500)] 
hw/i386: Remove unnecessary initialization in x86_cpu_new

The function pc_cpu_pre_plug takes care of initialization of CPUX86State.
So, remove the initialization here.

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396719336.58170.11951852360759449871.stgit@naples-babu.amd.com>

2 years agomachine: Add SMP Sockets in CpuTopology
Babu Moger [Wed, 11 Mar 2020 22:53:06 +0000 (17:53 -0500)] 
machine: Add SMP Sockets in CpuTopology

Store the  smp sockets in CpuTopology. The socket information required to
build the apic id in EPYC mode. Right now socket information is not passed
to down when decoding the apic id. Add the socket information here.

Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396718647.58170.2278448323151215741.stgit@naples-babu.amd.com>

2 years agohw/i386: Consolidate topology functions
Babu Moger [Wed, 11 Mar 2020 22:52:59 +0000 (17:52 -0500)] 
hw/i386: Consolidate topology functions

Now that we have all the parameters in X86CPUTopoInfo, we can just
pass the structure to calculate the offsets and width.

Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396717953.58170.5628042059144117669.stgit@naples-babu.amd.com>

2 years agohw/i386: Introduce X86CPUTopoInfo to contain topology info
Babu Moger [Wed, 11 Mar 2020 22:52:52 +0000 (17:52 -0500)] 
hw/i386: Introduce X86CPUTopoInfo to contain topology info

This is an effort to re-arrange few data structure for better readability.

1. Add X86CPUTopoInfo which will have all the topology informations
   required to build the cpu topology. There is no functional changes.

2. Introduce init_topo_info to initialize X86CPUTopoInfo members from
   X86MachineState.

3. Update x86 unit tests for new calling convention with parameter X86CPUTopoInfo

There is no functional changes.

Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <158396717251.58170.4499717831243474938.stgit@naples-babu.amd.com>

2 years agocpu: Use DeviceClass reset instead of a special CPUClass reset
Peter Maydell [Tue, 3 Mar 2020 10:05:11 +0000 (10:05 +0000)] 
cpu: Use DeviceClass reset instead of a special CPUClass reset

The CPUClass has a 'reset' method.  This is a legacy from when
TYPE_CPU used not to inherit from TYPE_DEVICE.  We don't need it any
more, as we can simply use the TYPE_DEVICE reset.  The 'cpu_reset()'
function is kept as the API which most places use to reset a CPU; it
is now a wrapper which calls device_cold_reset() and then the
tracepoint function.

This change should not cause CPU objects to be reset more often
than they are at the moment, because:
 * nobody is directly calling device_cold_reset() or
   qdev_reset_all() on CPU objects
 * no CPU object is on a qbus, so they will not be reset either
   by somebody calling qbus_reset_all()/bus_cold_reset(), or
   by the main "reset sysbus and everything in the qbus tree"
   reset that most devices are reset by

Note that this does not change the need for each machine or whatever
to use qemu_register_reset() to arrange to call cpu_reset() -- that
is necessary because CPU objects are not on any qbus, so they don't
get reset when the qbus tree rooted at the sysbus bus is reset, and
this isn't being changed here.

All the changes to the files under target/ were made using the
included Coccinelle script, except:

(1) the deletion of the now-inaccurate and not terribly useful
"CPUClass::reset" comments was done with a perl one-liner afterwards:
  perl -n -i -e '/ CPUClass::reset/ or print' target/*/*.c

(2) this bit of the s390 change was done by hand, because the
Coccinelle script is not sophisticated enough to handle the
parent_reset call being inside another function:

| @@ -96,8 +96,9 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type)
|     S390CPU *cpu = S390_CPU(s);
|     S390CPUClass *scc = S390_CPU_GET_CLASS(cpu);
|     CPUS390XState *env = &cpu->env;
|+    DeviceState *dev = DEVICE(s);
|
|-    scc->parent_reset(s);
|+    scc->parent_reset(dev);
|     cpu->env.sigp_order = 0;
|     s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu);

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200303100511.5498-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2 years agomachine/memory encryption: Disable mem merge
Dr. David Alan Gilbert [Thu, 30 Jan 2020 17:50:46 +0000 (17:50 +0000)] 
machine/memory encryption: Disable mem merge

When a host is running with memory encryption, the memory isn't visible
to the host kernel; attempts to merge that memory are futile because
what it's really comparing is encrypted memory, usually encrypted
with different keys.

Automatically turn mem-merge off when memory encryption is specified.

https://bugzilla.redhat.com/show_bug.cgi?id=1796356

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200130175046.85850-1-dgilbert@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2 years agohw/i386: Rename X86CPUTopoInfo structure to X86CPUTopoIDs
Babu Moger [Tue, 3 Mar 2020 19:56:58 +0000 (13:56 -0600)] 
hw/i386: Rename X86CPUTopoInfo structure to X86CPUTopoIDs

Rename few data structures related to X86 topology.  X86CPUTopoIDs will
have individual arch ids. Next patch introduces X86CPUTopoInfo which will
have all topology information(like cores, threads etc..).

Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <158326541877.40452.17535023236841538507.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2 years agoi386: Add 2nd Generation AMD EPYC processors
Moger, Babu [Thu, 7 Nov 2019 18:01:04 +0000 (18:01 +0000)] 
i386: Add 2nd Generation AMD EPYC processors

Adds the support for 2nd Gen AMD EPYC Processors. The model display
name will be EPYC-Rome.

Adds the following new feature bits on top of the feature bits from the
first generation EPYC models.
perfctr-core : core performance counter extensions support. Enables the VM to
               use extended performance counter support. It enables six
               programmable counters instead of four counters.
clzero       : instruction zeroes out the 64 byte cache line specified in RAX.
xsaveerptr   : XSAVE, XSAVE, FXSAVEOPT, XSAVEC, XSAVES always save error
               pointers and FXRSTOR, XRSTOR, XRSTORS always restore error
               pointers.
wbnoinvd     : Write back and do not invalidate cache
ibpb         : Indirect Branch Prediction Barrier
amd-stibp    : Single Thread Indirect Branch Predictor
clwb         : Cache Line Write Back and Retain
xsaves       : XSAVES, XRSTORS and IA32_XSS support
rdpid        : Read Processor ID instruction support
umip         : User-Mode Instruction Prevention support

The  Reference documents are available at
https://developer.amd.com/wp-content/resources/55803_0.54-PUB.pdf
https://www.amd.com/system/files/TechDocs/24594.pdf

Depends on following kernel commits:
40bc47b08b6e ("kvm: x86: Enumerate support for CLZERO instruction")
504ce1954fba ("KVM: x86: Expose XSAVEERPTR to the guest")
6d61e3c32248 ("kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID")
52297436199d ("kvm: svm: Update svm_xsaves_supported")

Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <157314966312.23828.17684821666338093910.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2 years agoi386: Add missing cpu feature bits in EPYC model
Moger, Babu [Thu, 7 Nov 2019 18:00:57 +0000 (18:00 +0000)] 
i386: Add missing cpu feature bits in EPYC model

Adds the following missing CPUID bits:
perfctr-core : core performance counter extensions support. Enables the VM
               to use extended performance counter support. It enables six
               programmable counters instead of 4 counters.
clzero       : instruction zeroes out the 64 byte cache line specified in RAX.
xsaveerptr   : XSAVE, XSAVE, FXSAVEOPT, XSAVEC, XSAVES always save error
               pointers and FXRSTOR, XRSTOR, XRSTORS always restore error
               pointers.
ibpb         : Indirect Branch Prediction Barrie.
xsaves       : XSAVES, XRSTORS and IA32_XSS supported.

Depends on following kernel commits:
40bc47b08b6e ("kvm: x86: Enumerate support for CLZERO instruction")
504ce1954fba ("KVM: x86: Expose XSAVEERPTR to the guest")
52297436199d ("kvm: svm: Update svm_xsaves_supported")

These new features will be added in EPYC-v3. The -cpu help output after the change.
x86 EPYC-v1               AMD EPYC Processor
x86 EPYC-v2               AMD EPYC Processor (with IBPB)
x86 EPYC-v3               AMD EPYC Processor

Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <157314965662.23828.3063243729449408327.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2 years agotarget/i386: Add new property note to versioned CPU models
Tao Xu [Wed, 12 Feb 2020 08:13:27 +0000 (16:13 +0800)] 
target/i386: Add new property note to versioned CPU models

Add additional information for -cpu help to indicate the changes in this
version of CPU model.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20200212081328.7385-4-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2 years agotarget/i386: Add Denverton-v2 (no MPX) CPU model
Tao Xu [Wed, 12 Feb 2020 08:13:25 +0000 (16:13 +0800)] 
target/i386: Add Denverton-v2 (no MPX) CPU model

Because MPX is being removed from the linux kernel, remove MPX feature
from Denverton.

Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20200212081328.7385-2-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2 years agotests/docker: make "buildah bud" output similar to "docker build"
Cleber Rosa [Thu, 12 Mar 2020 19:36:13 +0000 (15:36 -0400)] 
tests/docker: make "buildah bud" output similar to "docker build"

Podman users will most often be using buildah to build containers.
Among the differences between "buildah bud|build-using-dockerfile" and
a traditional "docker build" is that buildah does not run a container
during build.

To the best of my knowledge and experiments, this means that runtime
variables, such as ENV from one base image will not propagate into
another.  The end result is that the location for the cross compiler
binaries, defined in the base "qemu/debian9-mxe" image, are not passed
through this image.  Consequently, the cross compilers are not on PATH
and the build fails.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200312193616.438922-3-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
2 years agotests/docker: add CentOS 8 Dockerfile
Cleber Rosa [Thu, 12 Mar 2020 19:36:12 +0000 (15:36 -0400)] 
tests/docker: add CentOS 8 Dockerfile

Which is currenly missing, and will be referenced later in the
contributed CI playbooks.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200312193616.438922-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
2 years agoAcceptance tests: add make targets to download images
Cleber Rosa [Tue, 17 Mar 2020 14:16:54 +0000 (10:16 -0400)] 
Acceptance tests: add make targets to download images

The newly introduced "boot linux" tests make use of Linux images that
are larger than usual, and fall into what Avocado calls "vmimages",
and can be referred to by name, version and architecture.

The images can be downloaded automatically during the test. But, to
make for more reliable test results, this introduces a target that
will download the vmimages for the architectures that have been
configured and are available for the currently used distro (Fedora
31).

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Cleber: implemented suggestions by Alex, download message, check-venv target]
Message-Id: <20200317141654.29355-4-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
2 years agoAcceptance test: add "boot_linux" tests
Cleber Rosa [Tue, 17 Mar 2020 14:16:53 +0000 (10:16 -0400)] 
Acceptance test: add "boot_linux" tests

This acceptance test, validates that a full blown Linux guest can
successfully boot in QEMU.  In this specific case, the guest chosen is
Fedora version 31.

 * x86_64, pc-i440fx and pc-q35 machine types, with TCG and KVM as
   accelerators

 * aarch64 and virt machine type, with TCG and KVM as accelerators

 * ppc64 and pseries machine type with TCG as accelerator

 * s390x and s390-ccw-virtio machine type with TCG as accelerator

The Avocado vmimage utils library is used to download and cache the
Linux guest images, and from those images a snapshot image is created
and given to QEMU.  If a qemu-img binary is available in the build
directory, it's used to create the snapshot image, so that matching
qemu-system-* and qemu-img are used in the same test run.  If qemu-img
is not available in the build tree, one is attempted to be found
installed system-wide (in the $PATH).  If qemu-img is not found in the
build dir or in the $PATH, the test is canceled.

The method for checking the successful boot is based on "cloudinit"
and its "phone home" feature.  The guest is given an ISO image with
the location of the phone home server, and the information to post
(the instance ID).  Upon receiving the correct information, from the
guest, the test is considered to have PASSed.

This test is currently limited to user mode networking only, and
instructs the guest to connect to the "router" address that is hard
coded in QEMU.

To create the cloudinit ISO image that will be used to configure the
guest, the pycdlib library is also required and has been added as
requirement to the virtual environment created by "check-venv".

The console output is read by a separate thread, by means of the
Avocado datadrainer utility module.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20200317141654.29355-3-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
2 years agoAcceptance tests: introduce BUILD_DIR and SOURCE_DIR
Cleber Rosa [Tue, 17 Mar 2020 14:16:52 +0000 (10:16 -0400)] 
Acceptance tests: introduce BUILD_DIR and SOURCE_DIR

Some tests may benefit from using resources from a build directory.
This introduces three variables that can help tests find resources in
those directories.

First, a BUILD_DIR is assumed to exist, given that the primary form of
running the acceptance tests is from a build directory (which may or
may not be the same as the source tree, that is, the SOURCE_DIR).

If the directory containing the acceptance tests happens to be a link
to a directory, it's assumed to it points to the source tree
(SOURCE_DIR), which is the behavior defined on the QEMU Makefiles.  If
the directory containing the acceptance tests is not a link, then a
in-tree build is assumed, and the BUILD_DIR and SOURCE_DIR have the
same value.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20200317141654.29355-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
2 years agopython/qemu/qmp.py: QMP debug with VM label
Oksana Vohchana [Mon, 16 Mar 2020 10:32:03 +0000 (12:32 +0200)] 
python/qemu/qmp.py: QMP debug with VM label

QEMUMachine writes some messages to the default logger.
But it sometimes hard to read the output if we have requests to
more than one VM.
This patch adds a label to the logger in the debug mode.

Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200316103203.10046-1-ovoshcha@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
2 years agonet: Track netdevs in NetClientState rather than QemuOpt
Eric Blake [Tue, 17 Mar 2020 20:17:11 +0000 (15:17 -0500)] 
net: Track netdevs in NetClientState rather than QemuOpt

As mentioned in the previous patch, our use of QemuOpt group "netdev"
has two purposes: collect the CLI arguments, and serve as a witness
for monitor hotplug actions.  As the latter didn't use anything but an
id, it felt rather unclean to have to touch QemuOpts at all when going
through QMP, so let's instead track things with a bool field in
NetClientState.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317201711.322764-3-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2 years agonet: Complete qapi-fication of netdev_add
Eric Blake [Tue, 17 Mar 2020 20:17:10 +0000 (15:17 -0500)] 
net: Complete qapi-fication of netdev_add

We've had all the required pieces for doing a type-safe representation
of netdev_add as a flat union for quite some time now (since
0e55c381f6 in v2.7.0, released in 2016), but did not make the final
switch to using it because of concern about whether a command-line
regression in accepting "1" in place of 1 for integer arguments would
be problematic.  Back then, we did not have the deprecation cycle to
allow us to make progress.  But now that we have waited so long, other
problems have crept in: for example, our desire to add
qemu-storage-daemon is hampered by the inability to express net
objects, and we are unable to introspect what we actually accept.
Additionally, our round-trip through QemuOpts silently eats any
argument that expands to an array, rendering dnssearch, hostfwd, and
guestfwd useless through QMP:

{"execute": "netdev_add", "arguments": { "id": "netdev0",
  "type": "user", "dnssearch": [
    { "str": "8.8.8.8" }, { "str": "8.8.4.4" }
  ]}}

So without further ado, let's turn on proper QAPI.  netdev_add() was a
trivial wrapper around net_client_init(), which did a few steps prior
to calling net_client_init1(); with this patch, we now skip directly
to net_client_init1().  In addition to fixing array parameters, the
following additional differences occur:

-  {"execute": "netdev_add", "arguments": {"type": "help"}}
no longer attempts to print help to stdout and exit.  Bug fix, broken
in 547203ead4 'net: List available netdevs with "-netdev help"',
v2.12.0.

-  {"execute": "netdev_add", "arguments': {... "ipv6-net": "..." }}
no longer attempts to desugar the undocumented ipv6-net magic string
into the proper "ipv6-prefix" and "ipv6-prefixlen".  Undocumented
misfeature, introduced in commit 7aac531ef2 "qapi-schema, qemu-options
& slirp: Adding Qemu options for IPv6 addresses", v2.6.0.

-  {'execute':'netdev_add',
     'arguments':{'id':'net2', 'type':'hubport', 'hubid':"2"}}
   {"error": {"class": "GenericError", "desc": "Invalid parameter type for 'hubid', expected: integer"}}
Used to succeed: since our command line treats everything as strings,
our not-so-round-trip conversion from QAPI -> QemuOpts -> QAPI lost
the original typing and turned everything into a string; now that we
skip the QemuOpts, the JSON input has to match the exact QAPI type.
But this stricter QMP is desirable, and introspection is sufficient
for any affected applications to make sure they use it correctly.

In qmp_netdev_add(), we still have to create a QemuOpts object so that
qmp_netdev_del() will be able to remove a hotplugged network device;
but the opts->head remains empty since we now manage all parsing
through the QAPI object rather than QemuOpts; a separate patch will
address the abuse of QemuOpts as a witness for whether a
NetClientState is a netdev.  In the meantime, our argument that we are
okay requires auditing all uses of option group "netdev":

- qemu_netdev_opts: option group definition, empty .desc[]
- CLI (CLI netdev parsing ends before monitors start, so while
  monitors can mess with CLI netdevs, CLI cannot mess with
  monitor netdevs):
  - main() case QEMU_OPTION_netdev: store CLI definition
  - main() case QEMU_OPTION_readconfig, case QEMU_OPTION_writeconfig:
  similar, dealing only with CLI
  - net_init_clients(): Pass CLI to net_client_init()
- Monitor:
  - hmp_netdev_add(): straightforward parse into net_client_init()
  - qmp_netdev_add(): subject of this patch, used to add full
  object to option group, now just adds bare-bones id
  - qmp_netdev_del(), netdev_del_completion(): check the option group
  solely for id, as a 'is this a netdev' predicate

Reported-by: Alex Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317201711.322764-2-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2 years agoqmp: constify QmpCommand and list
Marc-André Lureau [Mon, 16 Mar 2020 17:18:24 +0000 (18:18 +0100)] 
qmp: constify QmpCommand and list

Since 0b69f6f72ce47a37a749b056b6d5ec64c61f11e8 "qapi: remove
qmp_unregister_command()", the command list can be declared const.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316171824.2319695-1-marcandre.lureau@redhat.com>
[Rebased]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2 years agoqapi: Mark deprecated QMP parts with feature 'deprecated'
Markus Armbruster [Tue, 17 Mar 2020 11:54:51 +0000 (12:54 +0100)] 
qapi: Mark deprecated QMP parts with feature 'deprecated'

Add feature 'deprecated' to the deprecated QMP commands, so their
deprecation becomes visible in output of query-qmp-schema.  Looks like
this:

    {"name": "query-cpus",
     "ret-type": "[164]",
     "meta-type": "command",
     "arg-type": "0",
---> "features": ["deprecated"]}

Management applications could conceivably use this for static
checking.

The deprecated commands are change, cpu-add, migrate-set-cache-size,
migrate_set_downtime, migrate_set_speed, query-cpus, query-events,
query-migrate-cache-size.

The deprecated command arguments are block-commit arguments @base and
@top, and block_set_io_throttle, blockdev-change-medium,
blockdev-close-tray, blockdev-open-tray, eject argument @device.

The deprecated command results are query-cpus-fast result @arch,
query-block result @dirty-bitmaps, query-named-block-nodes result
@encryption_key_missing and result @dirty-bitmaps's member @status.
Same for query-block result @inserted, which mirrors
query-named-block-nodes.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200317115459.31821-27-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2 years agoqapi: New special feature flag "deprecated"
Markus Armbruster [Tue, 17 Mar 2020 11:54:50 +0000 (12:54 +0100)] 
qapi: New special feature flag "deprecated"

Unlike regular feature flags, the new special feature flag
"deprecated" is recognized by the QAPI generator.  For now, it's only
permitted with commands, events, and struct members.  It will be put
to use shortly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200317115459.31821-26-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Doc typo fixed]

2 years agoqapi: Replace qmp_dispatch()'s TODO comment by an explanation
Markus Armbruster [Tue, 17 Mar 2020 11:54:49 +0000 (12:54 +0100)] 
qapi: Replace qmp_dispatch()'s TODO comment by an explanation

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200317115459.31821-25-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2 years agoqapi: Simplify how qmp_dispatch() gets the request ID
Markus Armbruster [Tue, 17 Mar 2020 11:54:48 +0000 (12:54 +0100)] 
qapi: Simplify how qmp_dispatch() gets the request ID

We convert the request object to a QDict twice: first in
qmp_dispatch() to get the request ID, and then again in
qmp_dispatch_check_obj(), which converts to QDict, then checks and
returns it.  We can't get the request ID from the latter, because it's
null when the qdict flunks the checks.

Move the checked conversion to QDict from qmp_dispatch_check_obj() to
qmp_dispatch(), and drop the duplicate there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-24-armbru@redhat.com>

2 years agoqapi: Simplify how qmp_dispatch() deals with QCO_NO_SUCCESS_RESP
Markus Armbruster [Tue, 17 Mar 2020 11:54:47 +0000 (12:54 +0100)] 
qapi: Simplify how qmp_dispatch() deals with QCO_NO_SUCCESS_RESP

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-23-armbru@redhat.com>

2 years agoqapi: Inline do_qmp_dispatch() into qmp_dispatch()
Markus Armbruster [Tue, 17 Mar 2020 11:54:46 +0000 (12:54 +0100)] 
qapi: Inline do_qmp_dispatch() into qmp_dispatch()

Both functions check @request is a QDict, and both have code for
QCO_NO_SUCCESS_RESP.  This wasn't the case back when they were
created.  It's a sign of muddled responsibilities.  Inline.  The next
commits will clean up some more.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-22-armbru@redhat.com>

2 years agoqapi: Add feature flags to struct members
Markus Armbruster [Tue, 17 Mar 2020 11:54:45 +0000 (12:54 +0100)] 
qapi: Add feature flags to struct members

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-21-armbru@redhat.com>

2 years agoqapi/schema: Call QAPIDoc.connect_member() in just one place
Markus Armbruster [Tue, 17 Mar 2020 11:54:44 +0000 (12:54 +0100)] 
qapi/schema: Call QAPIDoc.connect_member() in just one place

The .connect_doc() of classes that have QAPISchemaMember connect them
to their documentation.  Change them to delegate the actual work to
new QAPISchemaMember.connect_doc().  Matches the .connect_doc() that
already exist.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-20-armbru@redhat.com>

2 years agoqapi/schema: Rename QAPISchemaObjectType{Variant,Variants}
Markus Armbruster [Tue, 17 Mar 2020 11:54:43 +0000 (12:54 +0100)] 
qapi/schema: Rename QAPISchemaObjectType{Variant,Variants}

QAPISchemaObjectTypeVariants represents both object type and alternate
type variants.  Rename to QAPISchemaVariants.

Rename QAPISchemaObjectTypeVariant the same way.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-19-armbru@redhat.com>

2 years agoqapi/schema: Reorder classes so related ones are together
Markus Armbruster [Tue, 17 Mar 2020 11:54:42 +0000 (12:54 +0100)] 
qapi/schema: Reorder classes so related ones are together

Move QAPISchemaAlternateType up some, so that all QAPISchemaFOOType
are together.  Move QAPISchemaObjectTypeVariants right behind its
users.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-18-armbru@redhat.com>

2 years agoqapi/schema: Change _make_features() to a take feature list
Markus Armbruster [Tue, 17 Mar 2020 11:54:41 +0000 (12:54 +0100)] 
qapi/schema: Change _make_features() to a take feature list

QAPISchema._make_features() takes a definition expression, and
extracts its 'features' member.  The other ._make_FOO() leave
destructuring expressions to their callers.  Change ._make_features()
to match them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200317115459.31821-17-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2 years agoqapi/introspect: Factor out _make_tree()
Markus Armbruster [Tue, 17 Mar 2020 11:54:40 +0000 (12:54 +0100)] 
qapi/introspect: Factor out _make_tree()

The value of @qmp_schema_qlit is generated from an expression tree.
Tree nodes are created in several places.  Factor out the common code
into _make_tree().  This isn't much of a win now.  It will pay off
when we add feature flags in the next few commits.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-16-armbru@redhat.com>

2 years agoqapi/introspect: Rename *qlit* to reduce confusion
Markus Armbruster [Tue, 17 Mar 2020 11:54:39 +0000 (12:54 +0100)] 
qapi/introspect: Rename *qlit* to reduce confusion

We generate the value of qmp_schema_qlit from an expression tree.  The
function doing that is named to_qlit(), and its inputs are accumulated
in QAPISchemaGenIntrospectVisitor._qlits.  We call both its input and
its output "qlit".  This is confusing.

Use "tree" for input, and "qlit" only for output: rename to_qlit() to
_tree_to_qlit(), ._qlits to ._trees, ._gen_qlit() to ._gen_tree().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-15-armbru@redhat.com>

2 years agoqapi: Consistently put @features parameter right after @ifcond
Markus Armbruster [Tue, 17 Mar 2020 11:54:38 +0000 (12:54 +0100)] 
qapi: Consistently put @features parameter right after @ifcond

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-14-armbru@redhat.com>

2 years agoqapi: Add feature flags to remaining definitions
Markus Armbruster [Tue, 17 Mar 2020 11:54:37 +0000 (12:54 +0100)] 
qapi: Add feature flags to remaining definitions

In v4.1.0, we added feature flags just to struct types (commit
6a8c0b5102^..f3ed93d545), to satisfy an immediate need (commit
c9d4070991 "file-posix: Add dynamic-auto-read-only QAPI feature").  In
v4.2.0, we added them to commands (commit 23394b4c39 "qapi: Add
feature flags to commands") to satisfy another immediate need (commit
d76744e65e "qapi: Allow introspecting fix for savevm's cooperation
with blockdev").

Add them to the remaining definitions: enumeration types, union types,
alternate types, and events.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-13-armbru@redhat.com>

2 years agoqapi/schema: Clean up around QAPISchemaEntity.connect_doc()
Markus Armbruster [Tue, 17 Mar 2020 11:54:36 +0000 (12:54 +0100)] 
qapi/schema: Clean up around QAPISchemaEntity.connect_doc()

QAPISchemaEntity calls doc.connect_feature() in .check().  Improper
since commit ee1e6a1f6c8 split .connect_doc() off .check().  Move the
call.  Requires making the children call super().connect_doc() as they
should.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-12-armbru@redhat.com>

2 years agotests/test-qmp-event: Check event is actually emitted
Markus Armbruster [Tue, 17 Mar 2020 11:54:35 +0000 (12:54 +0100)] 
tests/test-qmp-event: Check event is actually emitted

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-11-armbru@redhat.com>

2 years agotests/test-qmp-event: Use qobject_is_equal()
Markus Armbruster [Tue, 17 Mar 2020 11:54:34 +0000 (12:54 +0100)] 
tests/test-qmp-event: Use qobject_is_equal()

Locally defined helper qdict_cmp_simple() implements just enough of a
comparison to serve here.  Replace it by qobject_is_equal(), which
implements all of it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-10-armbru@redhat.com>

2 years agotests/test-qmp-event: Simplify test data setup
Markus Armbruster [Tue, 17 Mar 2020 11:54:33 +0000 (12:54 +0100)] 
tests/test-qmp-event: Simplify test data setup

Building expected data with qdict_put() & friends is tedious to write
and hard to read.  Parse them from string literals with
qdict_from_jsonf_nofail() instead.

While there, use initializers instead of assignments for initializing
aggregate event arguments.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-9-armbru@redhat.com>

2 years agotests/test-qmp-cmds: Simplify test data setup
Markus Armbruster [Tue, 17 Mar 2020 11:54:32 +0000 (12:54 +0100)] 
tests/test-qmp-cmds: Simplify test data setup

Building requests with qdict_put() & friends is tedious to write and
hard to read.  Parse them from string literals with
qdict_from_vjsonf_nofail() instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-8-armbru@redhat.com>

2 years agotests/test-qmp-cmds: Check responses more thoroughly
Markus Armbruster [Tue, 17 Mar 2020 11:54:31 +0000 (12:54 +0100)] 
tests/test-qmp-cmds: Check responses more thoroughly

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-7-armbru@redhat.com>

2 years agotests/test-qmp-cmds: Factor out qmp_dispatch() test helpers
Markus Armbruster [Tue, 17 Mar 2020 11:54:30 +0000 (12:54 +0100)] 
tests/test-qmp-cmds: Factor out qmp_dispatch() test helpers

Checking the value of qmp_dispatch() is repetitive.  Factor out
helpers do_qmp_dispatch() and do_qmp_dispatch_error().  Without this,
the next commit would make things even more repetitive.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-6-armbru@redhat.com>

2 years agodocs/devel/qapi-code-gen: Document 'features' introspection
Markus Armbruster [Tue, 17 Mar 2020 11:54:29 +0000 (12:54 +0100)] 
docs/devel/qapi-code-gen: Document 'features' introspection

Commit 6a8c0b5102 "qapi: Add feature flags to struct types" neglected
to update section "Client JSON Protocol introspection", and commit
23394b4c39 "qapi: Add feature flags to commands" didn't either.  Make
up for that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-5-armbru@redhat.com>

2 years agodocs/devel/qapi-code-gen: Clarify allow-oob introspection
Markus Armbruster [Tue, 17 Mar 2020 11:54:28 +0000 (12:54 +0100)] 
docs/devel/qapi-code-gen: Clarify allow-oob introspection

Mention SchemaInfo variant member "allow-oob" defaults to false.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-4-armbru@redhat.com>

2 years agoqapi: Belatedly update doc comment for @wait deprecation
Markus Armbruster [Tue, 17 Mar 2020 11:54:27 +0000 (12:54 +0100)] 
qapi: Belatedly update doc comment for @wait deprecation

Commit a9b305ba29 "socket: allow wait=false for client socket"
deprecated use of @wait for client socket chardevs, but neglected to
update char.json's doc comment.  Make up for that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-3-armbru@redhat.com>

2 years agoqemu-doc: Belatedly document QMP command arg & result deprecation
Markus Armbruster [Tue, 17 Mar 2020 11:54:26 +0000 (12:54 +0100)] 
qemu-doc: Belatedly document QMP command arg & result deprecation

A number of deprecated QMP arguments and results were missed in commit
eb22aeca65 "docs: document deprecation policy & deprecated features in
appendix" (v2.10.0):

* Commit b33945cfff "block: Accept device model name for
  blockdev-open/close-tray" (v2.8.0) deprecated blockdev-open-tray,
  blockdev-close-tray argument @device.

* Commit fbe2d8163e "block: Accept device model name for eject"
  (v2.8.0) deprecated eject argument @device.

* Commit 70e2cb3bd7 "block: Accept device model name for
  blockdev-change-medium" (v2.8.0) deprecated blockdev-change-medium
  argument @device.

* Commit 7a9877a026 "block: Accept device model name for
  block_set_io_throttle" (v2.8.0) deprecated block_set_io_throttle
  argument @device.

* Commit c01c214b69 "block: remove all encryption handling APIs"
  (v2.10.0) deprecated query-named-block-nodes result
  @encryption_key_missing and query-block result @inserted member
  @encryption_key_missing.

* Commit c42e8742f5 "block: Use JSON null instead of "" to disable
  backing file" (v2.10.0) deprecated blockdev-add empty string
  argument @backing.

Since then, we missed a few more:

* Commit 3c605f4074 "commit: Add top-node/base-node options" (v3.1.0)
  deprecated block-commit arguments @base and @top.

* Commit 4db6ceb0b5 "block/dirty-bitmap: add recording and busy
  properties" (v4.0.0) deprecated query-named-block-nodes result
  @dirty-bitmaps member @status, not just query-block.

Make up for all that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-2-armbru@redhat.com>

2 years agoMerge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Peter Maydell [Tue, 17 Mar 2020 18:33:05 +0000 (18:33 +0000)] 
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Bugfixes all over the place
* get/set_uint cleanups (Felipe)
* Lock guard support (Stefan)
* MemoryRegion ownership cleanup (Philippe)
* AVX512 optimization for buffer_is_zero (Robert)

# gpg: Signature made Tue 17 Mar 2020 15:01:54 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (62 commits)
  hw/arm: Let devices own the MemoryRegion they create
  hw/arm: Remove unnecessary memory_region_set_readonly() on ROM alias
  hw/ppc/ppc405: Use memory_region_init_rom() with read-only regions
  hw/arm/stm32: Use memory_region_init_rom() with read-only regions
  hw/char: Let devices own the MemoryRegion they create
  hw/riscv: Let devices own the MemoryRegion they create
  hw/dma: Let devices own the MemoryRegion they create
  hw/display: Let devices own the MemoryRegion they create
  hw/core: Let devices own the MemoryRegion they create
  scripts/cocci: Patch to let devices own their MemoryRegions
  scripts/cocci: Patch to remove unnecessary memory_region_set_readonly()
  scripts/cocci: Patch to detect potential use of memory_region_init_rom
  hw/sparc: Use memory_region_init_rom() with read-only regions
  hw/sh4: Use memory_region_init_rom() with read-only regions
  hw/riscv: Use memory_region_init_rom() with read-only regions
  hw/ppc: Use memory_region_init_rom() with read-only regions
  hw/pci-host: Use memory_region_init_rom() with read-only regions
  hw/net: Use memory_region_init_rom() with read-only regions
  hw/m68k: Use memory_region_init_rom() with read-only regions
  hw/display: Use memory_region_init_rom() with read-only regions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 years agoMerge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Peter Maydell [Tue, 17 Mar 2020 17:41:48 +0000 (17:41 +0000)] 
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Tue 17 Mar 2020 15:18:23 GMT
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  block/io: fix bdrv_co_do_copy_on_readv

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 years agogdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdb
Changbin Du [Mon, 16 Mar 2020 17:21:55 +0000 (17:21 +0000)] 
gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdb

Recently when debugging an arm32 system on qemu, I found sometimes the
single-step command (stepi) is not working. This can be reproduced by
below steps:
 1) start qemu-system-arm -s -S .. and wait for gdb connection.
 2) start gdb and connect to qemu. In my case, gdb gets a wrong value
    (0x60) for PC, which is an another bug.
 3) After connected, type 'stepi' and expect it will stop at next ins.

But, it has never stopped. This because:
 1) We doesn't report ‘vContSupported’ feature to gdb explicitly and gdb
    think we do not support it. In this case, gdb use a software breakpoint
    to emulate single-step.
 2) Since gdb gets a wrong initial value of PC, then gdb inserts a
    breakpoint to wrong place (PC+4).

Not only for the arm target, Philippe has also encountered this on MIPS.
Probably gdb has different assumption for different architectures.

Since we do support ‘vContSupported’ query command, so let's tell gdb that
we support it.

Before this change, gdb send below 'Z0' packet to implement single-step:
gdb_handle_packet: Z0,4,4

After this change, gdb send "vCont;s.." which is expected:
gdb_handle_packet: vCont?
put_packet: vCont;c;C;s;S
gdb_handle_packet: vCont;s:p1.1;c:p1.-1

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200221002559.6768-1-changbin.du@gmail.com>
[AJB: fix for static gdbstub]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-Id: <20200316172155.971-29-alex.bennee@linaro.org>

2 years agogdbstub: do not split gdb_monitor_write payload
Damien Hedde [Mon, 16 Mar 2020 17:21:54 +0000 (17:21 +0000)] 
gdbstub: do not split gdb_monitor_write payload

Since we can now send packets of arbitrary length:
simplify gdb_monitor_write() and send the whole payload
in one packet.

Suggested-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191211160514.58373-3-damien.hedde@greensocs.com>
Message-Id: <20200316172155.971-28-alex.bennee@linaro.org>

2 years agogdbstub: change GDBState.last_packet to GByteArray
Damien Hedde [Mon, 16 Mar 2020 17:21:53 +0000 (17:21 +0000)] 
gdbstub: change GDBState.last_packet to GByteArray

Remove the packet size upper limit by using a GByteArray
instead of a statically allocated array for last_packet.
Thus we can now send big packets.

Also remove the last_packet_len field and use last_packet->len
instead.

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191211160514.58373-2-damien.hedde@greensocs.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-27-alex.bennee@linaro.org>

2 years agotests/tcg/aarch64: add test-sve-ioctl guest-debug test
Alex Bennée [Mon, 16 Mar 2020 17:21:52 +0000 (17:21 +0000)] 
tests/tcg/aarch64: add test-sve-ioctl guest-debug test

This test exercises the gdbstub while runing the sve-iotcl test. I
haven't plubmed it into make system as we need a way of verifying if
gdb has the right support for SVE.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200316172155.971-26-alex.bennee@linaro.org>

2 years agotests/tcg/aarch64: add SVE iotcl test
Alex Bennée [Mon, 16 Mar 2020 17:21:51 +0000 (17:21 +0000)] 
tests/tcg/aarch64: add SVE iotcl test

This is a fairly bare-bones test of setting the various vector sizes
for SVE which will only fail if the PR_SVE_SET_VL can't reduce the
user-space vector length by powers of 2.

However we will also be able to use it in a future test which
exercises the GDB stub.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-25-alex.bennee@linaro.org>

2 years agotests/tcg/aarch64: add a gdbstub testcase for SVE registers
Alex Bennée [Mon, 16 Mar 2020 17:21:50 +0000 (17:21 +0000)] 
tests/tcg/aarch64: add a gdbstub testcase for SVE registers

A very simple test case which sets and reads SVE registers while
running a test case. We don't really need to compile a SVE binary for
this case but we will later so keep it simple for now.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-24-alex.bennee@linaro.org>

2 years agotests/guest-debug: add a simple test runner
Alex Bennée [Mon, 16 Mar 2020 17:21:49 +0000 (17:21 +0000)] 
tests/guest-debug: add a simple test runner

The test runners job is to start QEMU with guest debug enabled and
then spawn a gdb process running a test script that exercises the
functionality it wants to test.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-23-alex.bennee@linaro.org>

2 years agoconfigure: allow user to specify what gdb to use
Alex Bennée [Mon, 16 Mar 2020 17:21:48 +0000 (17:21 +0000)] 
configure: allow user to specify what gdb to use

This is useful, especially when testing relatively new gdbstub
features that might not be in distro packages yet.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-22-alex.bennee@linaro.org>

2 years agotests/tcg/aarch64: userspace system register test
Alex Bennée [Mon, 16 Mar 2020 17:21:47 +0000 (17:21 +0000)] 
tests/tcg/aarch64: userspace system register test

This tests a bunch of registers that the kernel allows userspace to
read including the CPUID registers. We need a SVE aware compiler as we
are testing the id_aa64zfr0_el1 register in the set.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-21-alex.bennee@linaro.org>

2 years agotarget/arm: don't bother with id_aa64pfr0_read for USER_ONLY
Alex Bennée [Mon, 16 Mar 2020 17:21:46 +0000 (17:21 +0000)] 
target/arm: don't bother with id_aa64pfr0_read for USER_ONLY

For system emulation we need to check the state of the GIC before we
report the value. However this isn't relevant to exporting of the
value to linux-user and indeed breaks the exported value as set by
modify_arm_cp_regs.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-20-alex.bennee@linaro.org>

2 years agotarget/arm: generate xml description of our SVE registers
Alex Bennée [Mon, 16 Mar 2020 17:21:45 +0000 (17:21 +0000)] 
target/arm: generate xml description of our SVE registers

We also expose a the helpers to read/write the the registers.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-19-alex.bennee@linaro.org>

2 years agotarget/arm: default SVE length to 64 bytes for linux-user
Alex Bennée [Mon, 16 Mar 2020 17:21:44 +0000 (17:21 +0000)] 
target/arm: default SVE length to 64 bytes for linux-user

The Linux kernel chooses the default of 64 bytes for SVE registers on
the basis that it is the largest size on known hardware that won't
grow the signal frame. We still honour the sve-max-vq property and
userspace can expand the number of lanes by calling PR_SVE_SET_VL.

This should not make any difference to SVE enabled software as the SVE
is of course vector length agnostic.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-18-alex.bennee@linaro.org>

2 years agotarget/arm: explicitly encode regnum in our XML
Alex Bennée [Mon, 16 Mar 2020 17:21:43 +0000 (17:21 +0000)] 
target/arm: explicitly encode regnum in our XML

This is described as optional but I'm not convinced of the numbering
when multiple target fragments are sent.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-17-alex.bennee@linaro.org>

2 years agotarget/arm: prepare for multiple dynamic XMLs
Alex Bennée [Mon, 16 Mar 2020 17:21:42 +0000 (17:21 +0000)] 
target/arm: prepare for multiple dynamic XMLs

We will want to generate similar dynamic XML for gdbstub support of
SVE registers (the upstream doesn't use XML). To that end lightly
rename a few things to make the distinction.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-16-alex.bennee@linaro.org>

2 years agogdbstub: extend GByteArray to read register helpers
Alex Bennée [Mon, 16 Mar 2020 17:21:41 +0000 (17:21 +0000)] 
gdbstub: extend GByteArray to read register helpers

Instead of passing a pointer to memory now just extend the GByteArray
to all the read register helpers. They can then safely append their
data through the normal way. We don't bother with this abstraction for
write registers as we have already ensured the buffer being copied
from is the correct size.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316172155.971-15-alex.bennee@linaro.org>

2 years agotarget/i386: use gdb_get_reg helpers
Alex Bennée [Mon, 16 Mar 2020 17:21:40 +0000 (17:21 +0000)] 
target/i386: use gdb_get_reg helpers

This is cleaner than poking memory directly and will make later
clean-ups easier.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-14-alex.bennee@linaro.org>

2 years agotarget/m68k: use gdb_get_reg helpers
Alex Bennée [Mon, 16 Mar 2020 17:21:39 +0000 (17:21 +0000)] 
target/m68k: use gdb_get_reg helpers

This is cleaner than poking memory directly and will make later
clean-ups easier.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-13-alex.bennee@linaro.org>

2 years agotarget/arm: use gdb_get_reg helpers
Alex Bennée [Mon, 16 Mar 2020 17:21:38 +0000 (17:21 +0000)] 
target/arm: use gdb_get_reg helpers

This is cleaner than poking memory directly and will make later
clean-ups easier.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-12-alex.bennee@linaro.org>

2 years agogdbstub: add helper for 128 bit registers
Alex Bennée [Mon, 16 Mar 2020 17:21:37 +0000 (17:21 +0000)] 
gdbstub: add helper for 128 bit registers

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-11-alex.bennee@linaro.org>

2 years agogdbstub: move mem_buf to GDBState and use GByteArray
Alex Bennée [Mon, 16 Mar 2020 17:21:36 +0000 (17:21 +0000)] 
gdbstub: move mem_buf to GDBState and use GByteArray

This is in preparation for further re-factoring of the register API
with the rest of the code. Theoretically the read register function
could overwrite the MAX_PACKET_LENGTH buffer although currently all
registers are well within the size range.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Tested-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316172155.971-10-alex.bennee@linaro.org>

2 years agogdbstub: move str_buf to GDBState and use GString
Alex Bennée [Mon, 16 Mar 2020 17:21:35 +0000 (17:21 +0000)] 
gdbstub: move str_buf to GDBState and use GString

Rather than having a static buffer replace str_buf with a GString
which we know can grow on demand. Convert the internal functions to
take a GString instead of a char * and length.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Tested-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316172155.971-9-alex.bennee@linaro.org>

2 years agogdbstub: stop passing GDBState * around and use global
Alex Bennée [Mon, 16 Mar 2020 17:21:34 +0000 (17:21 +0000)] 
gdbstub: stop passing GDBState * around and use global

We only have one GDBState which should be allocated at the time we
process any commands. This will make further clean-up a bit easier.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-8-alex.bennee@linaro.org>

2 years agogdbstub: make GDBState static and have common init function
Alex Bennée [Mon, 16 Mar 2020 17:21:33 +0000 (17:21 +0000)] 
gdbstub: make GDBState static and have common init function

Instead of allocating make this entirely static. We shall reduce the
size of the structure in later commits and dynamically allocate parts
of it. We introduce an init and reset helper function to keep all the
manipulation in one place.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316172155.971-7-alex.bennee@linaro.org>

2 years agotravis.yml: Set G_MESSAGES_DEBUG do report GLib errors
Philippe Mathieu-Daudé [Mon, 16 Mar 2020 17:21:32 +0000 (17:21 +0000)] 
travis.yml: Set G_MESSAGES_DEBUG do report GLib errors

Since commit f5852efa293 we can display GLib errors with the QEMU
error reporting API. Set it to the 'error' level, as this helps
understanding failures from QEMU calls to GLib on Travis-CI.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200316101544.22361-1-philmd@redhat.com>
Message-Id: <20200316172155.971-6-alex.bennee@linaro.org>

2 years agotests/docker: Update VirGL to v0.8.0
Philippe Mathieu-Daudé [Mon, 16 Mar 2020 17:21:31 +0000 (17:21 +0000)] 
tests/docker: Update VirGL to v0.8.0

Building the qemu:debian-amd64 fails when building VirGL:

  make[2]: Entering directory '/usr/src/virglrenderer/src/gallium/auxiliary'
    CC       cso_cache/cso_cache.lo
    CC       cso_cache/cso_hash.lo
    CC       os/os_misc.lo
    CC       util/u_debug.lo
    CC       util/u_debug_describe.lo
    CC       util/u_format.lo
    GEN      util/u_format_table.c
  Traceback (most recent call last):
    File "./util/u_format_table.py", line 168, in <module>
      main()
    File "./util/u_format_table.py", line 164, in main
      write_format_table(formats)
    File "./util/u_format_table.py", line 132, in write_format_table
      print("   %s,\t/* is_array */" % (bool_map(format.is_array()),))
    File "/usr/src/virglrenderer/src/gallium/auxiliary/util/u_format_parse.py", line 164, in is_array
      return self.array_element() != None
    File "/usr/src/virglrenderer/src/gallium/auxiliary/util/u_format_parse.py", line 73, in __eq__
      return self.type == other.type and self.norm == other.norm and self.pure == other.pure and self.size == other.size
  AttributeError: 'NoneType' object has no attribute 'type'
  make[2]: Leaving directory '/usr/src/virglrenderer/src/gallium/auxiliary'
  make[2]: *** [Makefile:906: util/u_format_table.c] Error 1
  make[1]: *** [Makefile:631: install-recursive] Error 1

VirGL commits a8962eda1..a613dcc82 fix this problem.
Update to VirGL 0.8.0 which contains them.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200212202709.12665-4-philmd@redhat.com>
Message-Id: <20200316172155.971-5-alex.bennee@linaro.org>

2 years agotests/docker: Remove obsolete VirGL --with-glx configure option
Philippe Mathieu-Daudé [Mon, 16 Mar 2020 17:21:30 +0000 (17:21 +0000)] 
tests/docker: Remove obsolete VirGL --with-glx configure option

The GLX configure option has been removed in 71c75f201d [*].
We missed that when updating to v0.7.0 in commit fab3220f97.

This silents:

  configure: creating ./config.status
  config.status: creating virglrenderer.pc
  ...
  configure: WARNING: unrecognized options: --with-glx

[*] https://gitlab.freedesktop.org/virgl/virglrenderer/commit/71c75f201d

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200212202709.12665-3-philmd@redhat.com>
Message-Id: <20200316172155.971-4-alex.bennee@linaro.org>

2 years agotests/docker: Update VirGL git repository URL
Philippe Mathieu-Daudé [Mon, 16 Mar 2020 17:21:29 +0000 (17:21 +0000)] 
tests/docker: Update VirGL git repository URL

freedesktop.org is moving to a GitLab instance,
use the new url.

- https://www.fooishbar.org/blog/gitlab-fdo-introduction/
- https://gitlab.freedesktop.org/freedesktop/freedesktop/-/wikis/home

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200212202709.12665-2-philmd@redhat.com>
Message-Id: <20200316172155.971-3-alex.bennee@linaro.org>

2 years agotests/docker: Install tools to cross-debug and build Linux kernels
Philippe Mathieu-Daudé [Mon, 16 Mar 2020 17:21:28 +0000 (17:21 +0000)] 
tests/docker: Install tools to cross-debug and build Linux kernels

We often run Linux kernels to test QEMU. We sometimes need
to build them manually to use non-default features. We only
miss the tiny 'bc' tool.

The ncurses library is helpful to run 'make menuconfig'.

Finally, gdb-multiarch allow us to debug a TCG guest when its
architecture is different than the host.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200212202738.12986-1-philmd@redhat.com>
Message-Id: <20200316172155.971-2-alex.bennee@linaro.org>

2 years agodocs/devel/qapi-code-gen: Fix typo in grammar
Markus Armbruster [Mon, 9 Mar 2020 14:26:38 +0000 (15:26 +0100)] 
docs/devel/qapi-code-gen: Fix typo in grammar

An ALTERNATIVE's value can only be a type name.  Arrays are not
supported, yet.  The text gets it right: "The form STRING is shorthand
for { 'type': STRING }."  The grammar doesn't.  Fix it.

Fixes: b6c37ebaaf074cac8fe8a4781dc3e79db23e914e
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200309142638.19988-1-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2 years agohw/sd/ssi-sd: fix error handling in ssi_sd_realize
Vladimir Sementsov-Ogievskiy [Tue, 17 Mar 2020 12:57:41 +0000 (15:57 +0300)] 
hw/sd/ssi-sd: fix error handling in ssi_sd_realize

It's wrong to use same err object as errp parameter for several
function calls without intermediate checking for error: we'll crash if
try to set err object twice. Fix that.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200317125741.15301-1-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2 years agoxen-block: Use one Error * variable instead of two
Markus Armbruster [Fri, 13 Mar 2020 17:05:17 +0000 (18:05 +0100)] 
xen-block: Use one Error * variable instead of two

While there, tidy up indentation, and add return just for consistency
and robustness.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200313170517.22480-4-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[The "while there" cleanups squashed in]

2 years agoMerge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-mar-17-2020' into...
Peter Maydell [Tue, 17 Mar 2020 16:23:03 +0000 (16:23 +0000)] 
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-mar-17-2020' into staging

MIPS queue for March 17th, 2020

# gpg: Signature made Tue 17 Mar 2020 12:53:50 GMT
# gpg:                using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [full]
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01  DD75 D497 2A89 67F7 5A65

* remotes/amarkovic/tags/mips-queue-mar-17-2020:
  MAINTAINERS: Add a file to the main MIPS section
  MAINTAINERS: Adjust maintainer's email
  MAINTAINERS: Adjust maintainer's status for some MIPS items

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 years agohw/ide: Remove unneeded inclusion of hw/ide.h
BALATON Zoltan [Tue, 17 Mar 2020 15:05:37 +0000 (16:05 +0100)] 
hw/ide: Remove unneeded inclusion of hw/ide.h

After previous clean ups we can drop direct inclusion of hw/ide.h from
several places.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: a3f72b663e537701c63cec5fc9cb8ed4f4249f28.1584457537.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
2 years agohw/ide: Move MAX_IDE_DEVS define to hw/ide/internal.h
BALATON Zoltan [Tue, 17 Mar 2020 15:05:37 +0000 (16:05 +0100)] 
hw/ide: Move MAX_IDE_DEVS define to hw/ide/internal.h

We can move this define now that less files use it to internal.h to
further reduce dependency on hw/ide.h.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: e68675d2f6252f229cf788b7cd163bb76fa3e26b.1584457537.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
2 years agohw/ide: Do ide_drive_get() within pci_ide_create_devs()
BALATON Zoltan [Tue, 17 Mar 2020 15:05:37 +0000 (16:05 +0100)] 
hw/ide: Do ide_drive_get() within pci_ide_create_devs()

The pci_ide_create_devs() function takes a hd_table parameter but all
callers just pass what ide_drive_get() returns so we can do it locally
simplifying callers and removing hd_table parameter.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: e9713fdded4d212fa68ed03b844e531934226a6f.1584457537.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
2 years agohw/ide/pci.c: Coding style update to fix checkpatch errors
BALATON Zoltan [Tue, 17 Mar 2020 15:05:37 +0000 (16:05 +0100)] 
hw/ide/pci.c: Coding style update to fix checkpatch errors

Spaces are required around a + operator and if statements should have
braces even for single line. Also make it simpler by reversing the
condition instead of breaking the loop.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 0d50336ab26a56240c8c17ca1ec6135a4092fcc9.1584457537.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
2 years agohw/ide: Remove now unneded #include "hw/pci/pci.h" from hw/ide.h
BALATON Zoltan [Tue, 17 Mar 2020 15:05:37 +0000 (16:05 +0100)] 
hw/ide: Remove now unneded #include "hw/pci/pci.h" from hw/ide.h

After previous patches we don't need hw/pci/pci.h any more in
hw/ide.h. Some files depended on implicit inclusion by this header
which are also fixed up here.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 444a5e34331bf1f7880541b8d46e0353f470f5a6.1584457537.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
2 years agohw/ide: Get rid of piix4_init function
BALATON Zoltan [Tue, 17 Mar 2020 15:05:37 +0000 (16:05 +0100)] 
hw/ide: Get rid of piix4_init function

This removes pci_piix4_ide_init() function similar to clean up done to
other ide devices.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: fe46b6536abbae77695f6d1c711a04a3f4b5481d.1584457537.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>