qemu.git
4 years agonbd: More debug typo fixes, use correct formats
Eric Blake [Wed, 11 May 2016 22:39:35 +0000 (16:39 -0600)] 
nbd: More debug typo fixes, use correct formats

Clean up some debug message oddities missed earlier; this includes
some typos, and recognizing that %d is not necessarily compatible
with uint32_t. Also add a couple messages that I found useful
while debugging things.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1463006384-7734-3-git-send-email-eblake@redhat.com>
[Do not use PRIx16, clang complains. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agonbd: Use BDRV_REQ_FUA for better FUA where supported
Eric Blake [Wed, 11 May 2016 22:39:34 +0000 (16:39 -0600)] 
nbd: Use BDRV_REQ_FUA for better FUA where supported

Rather than always flushing ourselves, let the block layer
forward the FUA on to the underlying device - where all
underlying layers also understand FUA, we are now more
efficient; and where any underlying layer doesn't understand
it, now the block layer takes care of the full flush fallback
on our behalf.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1463006384-7734-2-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agovl.c: Add '-L help' which lists data dirs.
Richard W.M. Jones [Mon, 16 May 2016 16:34:35 +0000 (17:34 +0100)] 
vl.c: Add '-L help' which lists data dirs.

QEMU compiles a list of data directories from various sources.  When
consuming a QEMU binary it's useful to be able to get this list of
data directories: a primary reason is so you can list what BIOSes or
keymaps ship with this version of QEMU.  However without reproducing
the method that QEMU uses internally, it's not possible to get the
list of data directories.

This commit adds a simple '-L help' option that just lists out the
data directories as qemu calculates them:

$ ./x86_64-softmmu/qemu-system-x86_64 -L help
/home/rjones/d/qemu/pc-bios
/usr/local/share/qemu

$ ./x86_64-softmmu/qemu-system-x86_64 -L /tmp -L help
/tmp
/home/rjones/d/qemu/pc-bios
/usr/local/share/qemu

Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1463416475-11728-2-git-send-email-rjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoKVM: use KVM_CAP_MAX_VCPU_ID
Greg Kurz [Thu, 26 May 2016 08:02:23 +0000 (10:02 +0200)] 
KVM: use KVM_CAP_MAX_VCPU_ID

As stated in linux/Documentation/virtual/kvm/api.txt:

The maximum possible value for max_vcpu_id can be retrieved using the
KVM_CAP_MAX_VCPU_ID of the KVM_CHECK_EXTENSION ioctl() at run-time.

If the KVM_CAP_MAX_VCPU_ID does not exist, you should assume that
max_vcpu_id is the same as the value returned from KVM_CAP_MAX_VCPUS.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Message-Id: <146424974323.5666.5471538288045048119.stgit@bahia.huguette.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoscsi-disk: Use (unsigned long) typecasts when using "%lu" format string
Thomas Huth [Mon, 13 Jun 2016 08:10:18 +0000 (10:10 +0200)] 
scsi-disk: Use (unsigned long) typecasts when using "%lu" format string

Some source code analyzers like cppcheck spill out a warning if
the sign of the argument does not match the format string.

Ticket: https://bugs.launchpad.net/qemu/+bug/1589564
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1465805418-15906-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agotarget-i386: kvm: cache KVM_GET_SUPPORTED_CPUID data
Chao Peng [Mon, 13 Jun 2016 02:21:27 +0000 (10:21 +0800)] 
target-i386: kvm: cache KVM_GET_SUPPORTED_CPUID data

KVM_GET_SUPPORTED_CPUID ioctl is called frequently when initializing
CPU. Depends on CPU features and CPU count, the number of calls can be
extremely high which slows down QEMU booting significantly. In our
testing, we saw 5922 calls with switches:

    -cpu SandyBridge -smp 6,sockets=6,cores=1,threads=1

This ioctl takes more than 100ms, which is almost half of the total
QEMU startup time.

While for most cases the data returned from two different invocations
are not changed, that means, we can cache the data to avoid trapping
into kernel for the second time. To make sure the cache safe one
assumption is desirable: the ioctl is stateless. This is not true for
CPUID leaves in general (such as CPUID leaf 0xD, whose value depends
on guest XCR0 and IA32_XSS) but it is true of KVM_GET_SUPPORTED_CPUID,
which runs before there is a value for XCR0 and IA32_XSS.

Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <1465784487-23482-1-git-send-email-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agonbd: simplify the nbd_request and nbd_reply structs
Paolo Bonzini [Mon, 13 Jun 2016 09:42:40 +0000 (11:42 +0200)] 
nbd: simplify the nbd_request and nbd_reply structs

These structs are never used to represent the bytes that go over the
network.  The big-endian network data is built into a uint8_t array
in nbd_{receive,send}_{request,reply}.  Remove the unused magic field,
reorder the struct to avoid holes, and remove the packed attribute.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agonbd: Don't use cpu_to_*w() functions
Peter Maydell [Fri, 10 Jun 2016 16:15:42 +0000 (17:15 +0100)] 
nbd: Don't use cpu_to_*w() functions

The cpu_to_*w() functions just compose a pointer dereference
with a byteswap. Instead use st*_p(), which handles potential
pointer misalignment and avoids the need to cast the pointer.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1465575342-12146-1-git-send-email-peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agonbd: Don't use *_to_cpup() functions
Peter Maydell [Fri, 10 Jun 2016 15:00:36 +0000 (16:00 +0100)] 
nbd: Don't use *_to_cpup() functions

The *_to_cpup() functions are not very useful, as they simply do
a pointer dereference and then a *_to_cpu(). Instead use either:
 * ld*_*_p(), if the data is at an address that might not be
   correctly aligned for the load
 * a local dereference and *_to_cpu(), if the pointer is
   the correct type and known to be correctly aligned

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1465570836-22211-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoconfigure: Remove unused CONFIG_SIGEV_THREAD_ID switch
Thomas Huth [Fri, 10 Jun 2016 15:04:44 +0000 (17:04 +0200)] 
configure: Remove unused CONFIG_SIGEV_THREAD_ID switch

The CONFIG_SIGEV_THREAD_ID switch is unused since the related code
has been removed by commit 6d327171551a12b937c5718073b9848d0274c74d
("aio / timers: Remove alarm timers"), so it can safely be removed
nowadays.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1465571084-19885-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoavx2 configure: Use primitives in test
Dr. David Alan Gilbert [Fri, 10 Jun 2016 11:16:18 +0000 (12:16 +0100)] 
avx2 configure: Use primitives in test

Use the avx2 primitives during the test, thus making sure that the
compiler and assembler could actually use avx2.

This also detects the failure case on gcc 4.8.x with -save-temps
and avoids the need for the gcc version check in cutils.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1465557378-24105-3-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoMake avx2 configure test work with -O2
Dr. David Alan Gilbert [Fri, 10 Jun 2016 11:16:17 +0000 (12:16 +0100)] 
Make avx2 configure test work with -O2

When configured with --extra-cflags=-O2 gcc optimised out the test
and the readelf failed the check leaving avx2 disabled.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1465557378-24105-2-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoMakefile: Fix tag file generation targets
Sergey Fedorov [Thu, 9 Jun 2016 17:58:35 +0000 (20:58 +0300)] 
Makefile: Fix tag file generation targets

"ctags" produces a file named "tags", not "ctags". It doesn't look
reasonable to use phony target name as a file name to remove. Just use
exact file names to remove in "ctags" and "TAGS" target receipts.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1465495115-24665-1-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoconfigure: Enable -Werror for MinGW builds, too
Thomas Huth [Wed, 8 Jun 2016 08:13:26 +0000 (10:13 +0200)] 
configure: Enable -Werror for MinGW builds, too

MinGW seems to compile currently without warnings, so it should
be safe to enable -Werror now for this environment, too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1465373606-18486-1-git-send-email-thuth@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoclean-includes: run it once more
Paolo Bonzini [Mon, 6 Jun 2016 16:56:37 +0000 (18:56 +0200)] 
clean-includes: run it once more

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoos-posix: include sys/mman.h
Paolo Bonzini [Mon, 6 Jun 2016 11:57:39 +0000 (13:57 +0200)] 
os-posix: include sys/mman.h

qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h.  Include it in
sysemu/os-posix.h and remove it from everywhere else.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoconfigure: Remove unused CONFIG_ZERO_MALLOC setting
Thomas Huth [Wed, 8 Jun 2016 15:11:23 +0000 (17:11 +0200)] 
configure: Remove unused CONFIG_ZERO_MALLOC setting

CONFIG_ZERO_MALLOC was only used in qemu-malloc.c and
this file has been removed with the following commit:

41a748265f4879b52b0e87ff9c93bed975163886
Remove qemu_malloc/qemu_free

So we don't need this configuration setting anymore.
This patch also removes the z_version variable, since
this is now also not needed anymore.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <1465398683-3152-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoMerge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Peter Maydell [Thu, 16 Jun 2016 14:22:56 +0000 (15:22 +0100)] 
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

# gpg: Signature made Thu 16 Jun 2016 15:01:27 BST
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (39 commits)
  hbitmap: add 'pos < size' asserts
  iotests: Add test for oVirt-like storage migration
  iotests: Add test for post-mirror backing chains
  block/null: Implement bdrv_refresh_filename()
  block/mirror: Fix target backing BDS
  block: Allow replacement of a BDS by its overlay
  rbd:change error_setg() to error_setg_errno()
  iotests: 095: Clean up QEMU before showing image info
  block: Create the commit block job before reopening any image
  block: Prevent sleeping jobs from resuming if they have been paused
  block: use the block job list in qmp_query_block_jobs()
  block: use the block job list in bdrv_drain_all()
  block: Fix snapshot=on with aio=native
  block: Remove bs->zero_beyond_eof
  qcow2: Let vmstate call qcow2_co_preadv/pwrite directly
  block: Make bdrv_load/save_vmstate coroutine_fns
  block: Allow .bdrv_load/save_vmstate() to return 0/-errno
  block: Make .bdrv_load_vmstate() vectored
  block: Introduce bdrv_preadv()
  doc: Fix mailing list address in tests/qemu-iotests/README
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoMerge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-06-16' into queue...
Kevin Wolf [Thu, 16 Jun 2016 13:22:18 +0000 (15:22 +0200)] 
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-06-16' into queue-block

Block patches

# gpg: Signature made Thu Jun 16 15:21:35 2016 CEST
# gpg:                using RSA key 0x3BB14202E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40
#      Subkey fingerprint: 58B3 81CE 2DC8 9CF9 9730  EE64 3BB1 4202 E838 ACAD

* mreitz/tags/pull-block-for-kevin-2016-06-16:
  hbitmap: add 'pos < size' asserts
  iotests: Add test for oVirt-like storage migration
  iotests: Add test for post-mirror backing chains
  block/null: Implement bdrv_refresh_filename()
  block/mirror: Fix target backing BDS
  block: Allow replacement of a BDS by its overlay
  rbd:change error_setg() to error_setg_errno()
  iotests: 095: Clean up QEMU before showing image info
  block: Create the commit block job before reopening any image
  block: Prevent sleeping jobs from resuming if they have been paused
  block: use the block job list in qmp_query_block_jobs()
  block: use the block job list in bdrv_drain_all()

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
4 years agohbitmap: add 'pos < size' asserts
Vladimir Sementsov-Ogievskiy [Tue, 14 Jun 2016 17:08:12 +0000 (20:08 +0300)] 
hbitmap: add 'pos < size' asserts

For now, fail in hbitmap_set on start + count > size will come from
hbitmap_set
  hb_count_between
    hbitmap_iter_init
      assert(pos < hb->size)

This patch adds such checks to set/get/reset functions of hbitmap.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 1465924093-76875-2-git-send-email-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
4 years agoiotests: Add test for oVirt-like storage migration
Max Reitz [Fri, 10 Jun 2016 18:57:50 +0000 (20:57 +0200)] 
iotests: Add test for oVirt-like storage migration

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160610185750.30956-6-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
4 years agoiotests: Add test for post-mirror backing chains
Max Reitz [Fri, 10 Jun 2016 18:57:49 +0000 (20:57 +0200)] 
iotests: Add test for post-mirror backing chains

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160610185750.30956-5-mreitz@redhat.com
Reviewed-by: Fam Zheng <famz@redhat.com>
[mreitz@redhat.com: Removed unnecessary imports]
Signed-off-by: Max Reitz <mreitz@redhat.com>
4 years agoblock/null: Implement bdrv_refresh_filename()
Max Reitz [Fri, 10 Jun 2016 18:57:48 +0000 (20:57 +0200)] 
block/null: Implement bdrv_refresh_filename()

The null block driver ignores any filename used for creating its BDSs,
which allows creating such BDSs even without any filename at all. In
that case, we currently construct a JSON filename when queried instead
of a plain "null-co://" or "null-aio://". This patch implements
bdrv_refresh_filename() to remedy this behavior.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160610185750.30956-4-mreitz@redhat.com
[mreitz@redhat.com: Added commit message]
Signed-off-by: Max Reitz <mreitz@redhat.com>
4 years agoblock/mirror: Fix target backing BDS
Max Reitz [Fri, 10 Jun 2016 18:57:47 +0000 (20:57 +0200)] 
block/mirror: Fix target backing BDS

Currently, we are trying to move the backing BDS from the source to the
target in bdrv_replace_in_backing_chain() which is called from
mirror_exit(). However, mirror_complete() already tries to open the
target's backing chain with a call to bdrv_open_backing_file().

First, we should only set the target's backing BDS once. Second, the
mirroring block job has a better idea of what to set it to than the
generic code in bdrv_replace_in_backing_chain() (in fact, the latter's
conditions on when to move the backing BDS from source to target are not
really correct).

Therefore, remove that code from bdrv_replace_in_backing_chain() and
leave it to mirror_complete().

Depending on what kind of mirroring is performed, we furthermore want to
use different strategies to open the target's backing chain:

- If blockdev-mirror is used, we can assume the user made sure that the
  target already has the correct backing chain. In particular, we should
  not try to open a backing file if the target does not have any yet.

- If drive-mirror with mode=absolute-paths is used, we can and should
  reuse the already existing chain of nodes that the source BDS is in.
  In case of sync=full, no backing BDS is required; with sync=top, we
  just link the source's backing BDS to the target, and with sync=none,
  we use the source BDS as the target's backing BDS.
  We should not try to open these backing files anew because this would
  lead to two BDSs existing per physical file in the backing chain, and
  we would like to avoid such concurrent access.

- If drive-mirror with mode=existing is used, we have to use the
  information provided in the physical image file which means opening
  the target's backing chain completely anew, just as it has been done
  already.
  If the target's backing chain shares images with the source, this may
  lead to multiple BDSs per physical image file. But since we cannot
  reliably ascertain this case, there is nothing we can do about it.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160610185750.30956-3-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
4 years agoblock: Allow replacement of a BDS by its overlay
Max Reitz [Fri, 10 Jun 2016 18:57:46 +0000 (20:57 +0200)] 
block: Allow replacement of a BDS by its overlay

change_parent_backing_link() asserts that the BDS to be replaced is not
used as a backing file. However, we may want to replace a BDS by its
overlay in which case that very link should not be redirected.

For instance, when doing a sync=none drive-mirror operation, we may have
the following BDS/BB forest before block job completion:

  target

  base <- source <- BlockBackend

During job completion, we want to establish the source BDS as the
target's backing node:

          target
            |
            v
  base <- source <- BlockBackend

This makes the target a valid replacement for the source:

          target <- BlockBackend
            |
            v
  base <- source

Without this modification to change_parent_backing_link() we have to
inject the target into the graph before the source is its backing node,
thus temporarily creating a wrong graph:

  target <- BlockBackend

  base <- source

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160610185750.30956-2-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
4 years agorbd:change error_setg() to error_setg_errno()
Vikhyat Umrao [Mon, 9 May 2016 07:51:59 +0000 (13:21 +0530)] 
rbd:change error_setg() to error_setg_errno()

Ceph RBD block driver does not use error_setg_errno() where
it is possible to use. This patch replaces error_setg()
from error_setg_errno().

Signed-off-by: Vikhyat Umrao <vumrao@redhat.com>
Message-id: 1462780319-5796-1-git-send-email-vumrao@redhat.com
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
4 years agoiotests: 095: Clean up QEMU before showing image info
Fam Zheng [Fri, 3 Jun 2016 09:07:52 +0000 (17:07 +0800)] 
iotests: 095: Clean up QEMU before showing image info

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464944872-24484-1-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
4 years agoblock: Create the commit block job before reopening any image
Alberto Garcia [Fri, 27 May 2016 10:53:39 +0000 (12:53 +0200)] 
block: Create the commit block job before reopening any image

If the base or overlay images need to be reopened in read-write mode
but the block_job_create() call fails then no one will put those
images back in read-only mode.

We can solve this problem easily by calling block_job_create() first.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: aa495045770a6f1a7cc5d408397a17c75097fdd8.1464346103.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
4 years agoblock: Prevent sleeping jobs from resuming if they have been paused
Alberto Garcia [Fri, 27 May 2016 10:53:38 +0000 (12:53 +0200)] 
block: Prevent sleeping jobs from resuming if they have been paused

If we pause a block job and drain its BlockDriverState we want that
the job remains inactive until we call block_job_resume() again.

However if we pause the job while it is sleeping then it will resume
when the sleep timer fires.

This patch prevents that from happening by checking if the job has
been paused after it comes back from sleeping.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 3d9011151512326b890d22bdab3530244ef349d7.1464346103.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
4 years agoblock: use the block job list in qmp_query_block_jobs()
Alberto Garcia [Fri, 27 May 2016 10:53:37 +0000 (12:53 +0200)] 
block: use the block job list in qmp_query_block_jobs()

qmp_query_block_jobs() uses bdrv_next() to look for block jobs, but
this function can only find those in top-level BlockDriverStates.

This patch uses block_job_next() instead.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: a8b7e5497b7c1fa67c12fcceae1630d01c3b1f96.1464346103.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
4 years agoblock: use the block job list in bdrv_drain_all()
Alberto Garcia [Fri, 27 May 2016 10:53:36 +0000 (12:53 +0200)] 
block: use the block job list in bdrv_drain_all()

bdrv_drain_all() pauses all block jobs by using bdrv_next() to iterate
over all top-level BlockDriverStates. Therefore the code is unable to
find block jobs in other nodes.

This patch uses block_job_next() to iterate over all block jobs.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 55ee7d7d4a65c28aa1a1b28823897ef326f328e2.1464346103.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
4 years agoblock: Fix snapshot=on with aio=native
Kevin Wolf [Thu, 16 Jun 2016 10:59:30 +0000 (12:59 +0200)] 
block: Fix snapshot=on with aio=native

snapshot=on creates a temporary overlay that is always opened with
cache=unsafe (the cache mode specified by the user is only for the
actual image file and its children). This means that we must not inherit
the BDRV_O_NATIVE_AIO flag for the temporary overlay because trying to
use Linux AIO with cache=unsafe results in an error.

Reproducer without this patch:

$ x86_64-softmmu/qemu-system-x86_64 -drive file=/tmp/test.qcow2,cache=none,aio=native,snapshot=on
qemu-system-x86_64: -drive file=/tmp/test.qcow2,cache=none,aio=native,snapshot=on: aio=native was
specified, but it requires cache.direct=on, which was not specified.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
4 years agoblock: Remove bs->zero_beyond_eof
Kevin Wolf [Wed, 1 Jun 2016 15:13:47 +0000 (17:13 +0200)] 
block: Remove bs->zero_beyond_eof

It is always true for open images now.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoqcow2: Let vmstate call qcow2_co_preadv/pwrite directly
Kevin Wolf [Wed, 1 Jun 2016 15:07:24 +0000 (17:07 +0200)] 
qcow2: Let vmstate call qcow2_co_preadv/pwrite directly

We don't really want to go through the block layer in order to read from
or write to the vmstate in a qcow2 image. Doing so required a few ugly
hacks like saving and restoring the old image size (because writing to
vmstate offsets would increase the image size) or disabling the "reads
after EOF = zeroes" logic. When calling the right functions directly,
these hacks aren't necessary any more.

Note that .bdrv_vmstate_load/save() return 0 instead of the number of
bytes in case of success now.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoblock: Make bdrv_load/save_vmstate coroutine_fns
Kevin Wolf [Thu, 9 Jun 2016 14:24:44 +0000 (16:24 +0200)] 
block: Make bdrv_load/save_vmstate coroutine_fns

This allows drivers to share code between normal I/O and vmstate
accesses.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoblock: Allow .bdrv_load/save_vmstate() to return 0/-errno
Kevin Wolf [Fri, 10 Jun 2016 15:57:26 +0000 (17:57 +0200)] 
block: Allow .bdrv_load/save_vmstate() to return 0/-errno

The return value of .bdrv_load/save_vmstate() can be any non-negative
number in case of success now. It used to be bytes/-errno.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoblock: Make .bdrv_load_vmstate() vectored
Kevin Wolf [Thu, 9 Jun 2016 14:50:16 +0000 (16:50 +0200)] 
block: Make .bdrv_load_vmstate() vectored

This brings it in line with .bdrv_save_vmstate().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoblock: Introduce bdrv_preadv()
Kevin Wolf [Thu, 9 Jun 2016 14:36:00 +0000 (16:36 +0200)] 
block: Introduce bdrv_preadv()

We already have a byte-based bdrv_pwritev(), but the read counterpart
was still missing. This commit adds it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agodoc: Fix mailing list address in tests/qemu-iotests/README
Thomas Huth [Thu, 16 Jun 2016 07:53:53 +0000 (09:53 +0200)] 
doc: Fix mailing list address in tests/qemu-iotests/README

The address of the mailing list is qemu-devel@nongnu.org
instead of qemu-devel@savannah.nongnu.org. And while we're
at it, also mention the qemu-block mailing list here.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
4 years agolinux-aio: Cancel BH if not needed
Kevin Wolf [Fri, 28 Nov 2014 14:23:12 +0000 (15:23 +0100)] 
linux-aio: Cancel BH if not needed

linux-aio uses a BH in order to make sure that the remaining completions
are processed even in nested event loops of completion callbacks in
order to avoid deadlocks.

There is no need, however, to have the BH overhead for the first call
into qemu_laio_completion_bh() or after all pending completions have
already been processed. Therefore, this patch calls directly into
qemu_laio_completion_bh() in qemu_laio_completion_cb() and cancels
the BH after qemu_laio_completion_bh() has processed all pending
completions.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoblock: Don't enforce 512 byte minimum alignment
Kevin Wolf [Fri, 3 Jun 2016 14:45:44 +0000 (16:45 +0200)] 
block: Don't enforce 512 byte minimum alignment

If block drivers say that they can do an alignment < 512 bytes, let's
just suppose they mean it. raw-posix used to be an offender with respect
to this, but it can actually deal with byte-aligned requests now.

The default is still 512 bytes for any drivers that only implement
sector-based interfaces, but it is 1 now for drivers that implement
.bdrv_co_preadv.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoraw-posix: Implement .bdrv_co_preadv/pwritev
Kevin Wolf [Fri, 3 Jun 2016 15:36:27 +0000 (17:36 +0200)] 
raw-posix: Implement .bdrv_co_preadv/pwritev

The raw-posix block driver actually supports byte-aligned requests now
on non-O_DIRECT images, like it already (and previously incorrectly)
claimed in bs->request_alignment.

For some block drivers this means that a RMW cycle can be avoided when
they write sub-sector metadata e.g. for cluster allocation.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoraw-posix: Switch to bdrv_co_* interfaces
Kevin Wolf [Wed, 6 Aug 2014 15:18:07 +0000 (17:18 +0200)] 
raw-posix: Switch to bdrv_co_* interfaces

In order to use the modern byte-based .bdrv_co_preadv/pwritev()
interface, this patch switches raw-posix to coroutine-based interfaces
as a first step. In terms of semantics and performance, it doesn't make
a difference with the existing code whether we go from a coroutine to a
callback-based interface already in block/io.c or only in linux-aio.c

As there have been concerns in the past that this change may be a step
in the wrong direction with respect to a possible AIO fast path, the
old callback-based interface for linux-aio is left around and can be
reactivated when a fast path (e.g. directly from virtio-blk dataplane,
bypassing the whole block layer) is implemented.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoblock: Prepare bdrv_aligned_pwritev() for byte-aligned requests
Kevin Wolf [Fri, 3 Jun 2016 16:42:51 +0000 (18:42 +0200)] 
block: Prepare bdrv_aligned_pwritev() for byte-aligned requests

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoblock: Prepare bdrv_aligned_preadv() for byte-aligned requests
Kevin Wolf [Fri, 3 Jun 2016 14:17:28 +0000 (16:17 +0200)] 
block: Prepare bdrv_aligned_preadv() for byte-aligned requests

This patch makes bdrv_aligned_preadv() ready to accept byte-aligned
requests. Note that this doesn't mean that such requests are actually
made. The caller still ensures that all requests are aligned to at least
512 bytes.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoblock: Byte-based bdrv_co_do_copy_on_readv()
Kevin Wolf [Thu, 2 Jun 2016 09:41:52 +0000 (11:41 +0200)] 
block: Byte-based bdrv_co_do_copy_on_readv()

In a first step to convert the common I/O path to work on bytes rather
than sectors, this converts the copy-on-read logic that is used by
bdrv_aligned_preadv().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoblock: drop support for using qcow[2] encryption with system emulators
Daniel P. Berrange [Mon, 13 Jun 2016 11:30:09 +0000 (12:30 +0100)] 
block: drop support for using qcow[2] encryption with system emulators

Back in the 2.3.0 release we declared qcow[2] encryption as
deprecated, warning people that it would be removed in a future
release.

  commit a1f688f4152e65260b94f37543521ceff8bfebe4
  Author: Markus Armbruster <armbru@redhat.com>
  Date:   Fri Mar 13 21:09:40 2015 +0100

    block: Deprecate QCOW/QCOW2 encryption

The code still exists today, but by a (happy?) accident we entirely
broke the ability to use qcow[2] encryption in the system emulators
in the 2.4.0 release due to

  commit 8336aafae1451d54c81dd2b187b45f7c45d2428e
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Tue May 12 17:09:18 2015 +0100

    qcow2/qcow: protect against uninitialized encryption key

This commit was designed to prevent future coding bugs which
might cause QEMU to read/write data on an encrypted block
device in plain text mode before a decryption key is set.

It turns out this preventative measure was a little too good,
because we already had a long standing bug where QEMU read
encrypted data in plain text mode during system emulator
startup, in order to guess disk geometry:

  Thread 10 (Thread 0x7fffd3fff700 (LWP 30373)):
  #0  0x00007fffe90b1a28 in raise () at /lib64/libc.so.6
  #1  0x00007fffe90b362a in abort () at /lib64/libc.so.6
  #2  0x00007fffe90aa227 in __assert_fail_base () at /lib64/libc.so.6
  #3  0x00007fffe90aa2d2 in  () at /lib64/libc.so.6
  #4  0x000055555587ae19 in qcow2_co_readv (bs=0x5555562accb0, sector_num=0, remaining_sectors=1, qiov=0x7fffffffd260) at block/qcow2.c:1229
  #5  0x000055555589b60d in bdrv_aligned_preadv (bs=bs@entry=0x5555562accb0, req=req@entry=0x7fffd3ffea50, offset=offset@entry=0, bytes=bytes@entry=512, align=align@entry=512, qiov=qiov@entry=0x7fffffffd260, flags=0) at block/io.c:908
  #6  0x000055555589b8bc in bdrv_co_do_preadv (bs=0x5555562accb0, offset=0, bytes=512, qiov=0x7fffffffd260, flags=<optimized out>) at block/io.c:999
  #7  0x000055555589c375 in bdrv_rw_co_entry (opaque=0x7fffffffd210) at block/io.c:544
  #8  0x000055555586933b in coroutine_thread (opaque=0x555557876310) at coroutine-gthread.c:134
  #9  0x00007ffff64e1835 in g_thread_proxy (data=0x5555562b5590) at gthread.c:778
  #10 0x00007ffff6bb760a in start_thread () at /lib64/libpthread.so.0
  #11 0x00007fffe917f59d in clone () at /lib64/libc.so.6

  Thread 1 (Thread 0x7ffff7ecab40 (LWP 30343)):
  #0  0x00007fffe91797a9 in syscall () at /lib64/libc.so.6
  #1  0x00007ffff64ff87f in g_cond_wait (cond=cond@entry=0x555555e085f0 <coroutine_cond>, mutex=mutex@entry=0x555555e08600 <coroutine_lock>) at gthread-posix.c:1397
  #2  0x00005555558692c3 in qemu_coroutine_switch (co=<optimized out>) at coroutine-gthread.c:117
  #3  0x00005555558692c3 in qemu_coroutine_switch (from_=0x5555562b5e30, to_=to_@entry=0x555557876310, action=action@entry=COROUTINE_ENTER) at coroutine-gthread.c:175
  #4  0x0000555555868a90 in qemu_coroutine_enter (co=0x555557876310, opaque=0x0) at qemu-coroutine.c:116
  #5  0x0000555555859b84 in thread_pool_completion_bh (opaque=0x7fffd40010e0) at thread-pool.c:187
  #6  0x0000555555859514 in aio_bh_poll (ctx=ctx@entry=0x5555562953b0) at async.c:85
  #7  0x0000555555864d10 in aio_dispatch (ctx=ctx@entry=0x5555562953b0) at aio-posix.c:135
  #8  0x0000555555864f75 in aio_poll (ctx=ctx@entry=0x5555562953b0, blocking=blocking@entry=true) at aio-posix.c:291
  #9  0x000055555589c40d in bdrv_prwv_co (bs=bs@entry=0x5555562accb0, offset=offset@entry=0, qiov=qiov@entry=0x7fffffffd260, is_write=is_write@entry=false, flags=flags@entry=(unknown: 0)) at block/io.c:591
  #10 0x000055555589c503 in bdrv_rw_co (bs=bs@entry=0x5555562accb0, sector_num=sector_num@entry=0, buf=buf@entry=0x7fffffffd2e0 "\321,", nb_sectors=nb_sectors@entry=21845, is_write=is_write@entry=false, flags=flags@entry=(unknown: 0)) at block/io.c:614
  #11 0x000055555589c562 in bdrv_read_unthrottled (nb_sectors=21845, buf=0x7fffffffd2e0 "\321,", sector_num=0, bs=0x5555562accb0) at block/io.c:622
  #12 0x000055555589c562 in bdrv_read_unthrottled (bs=0x5555562accb0, sector_num=sector_num@entry=0, buf=buf@entry=0x7fffffffd2e0 "\321,", nb_sectors=nb_sectors@entry=21845) at block/io.c:634
    nb_sectors@entry=1) at block/block-backend.c:504
  #14 0x0000555555752e9f in guess_disk_lchs (blk=blk@entry=0x5555562a5290, pcylinders=pcylinders@entry=0x7fffffffd52c, pheads=pheads@entry=0x7fffffffd530, psectors=psectors@entry=0x7fffffffd534) at hw/block/hd-geometry.c:68
  #15 0x0000555555752ff7 in hd_geometry_guess (blk=0x5555562a5290, pcyls=pcyls@entry=0x555557875d1c, pheads=pheads@entry=0x555557875d20, psecs=psecs@entry=0x555557875d24, ptrans=ptrans@entry=0x555557875d28) at hw/block/hd-geometry.c:133
  #16 0x0000555555752b87 in blkconf_geometry (conf=conf@entry=0x555557875d00, ptrans=ptrans@entry=0x555557875d28, cyls_max=cyls_max@entry=65536, heads_max=heads_max@entry=16, secs_max=secs_max@entry=255, errp=errp@entry=0x7fffffffd5e0) at hw/block/block.c:71
  #17 0x0000555555799bc4 in ide_dev_initfn (dev=0x555557875c80, kind=IDE_HD) at hw/ide/qdev.c:174
  #18 0x0000555555768394 in device_realize (dev=0x555557875c80, errp=0x7fffffffd640) at hw/core/qdev.c:247
  #19 0x0000555555769a81 in device_set_realized (obj=0x555557875c80, value=<optimized out>, errp=0x7fffffffd730) at hw/core/qdev.c:1058
  #20 0x00005555558240ce in property_set_bool (obj=0x555557875c80, v=<optimized out>, opaque=0x555557875de0, name=<optimized out>, errp=0x7fffffffd730)
        at qom/object.c:1514
  #21 0x0000555555826c87 in object_property_set_qobject (obj=obj@entry=0x555557875c80, value=value@entry=0x55555784bcb0, name=name@entry=0x55555591cb3d "realized", errp=errp@entry=0x7fffffffd730) at qom/qom-qobject.c:24
  #22 0x0000555555825760 in object_property_set_bool (obj=obj@entry=0x555557875c80, value=value@entry=true, name=name@entry=0x55555591cb3d "realized", errp=errp@entry=0x7fffffffd730) at qom/object.c:905
  #23 0x000055555576897b in qdev_init_nofail (dev=dev@entry=0x555557875c80) at hw/core/qdev.c:380
  #24 0x0000555555799ead in ide_create_drive (bus=bus@entry=0x555557629630, unit=unit@entry=0, drive=0x5555562b77e0) at hw/ide/qdev.c:122
  #25 0x000055555579a746 in pci_ide_create_devs (dev=dev@entry=0x555557628db0, hd_table=hd_table@entry=0x7fffffffd830) at hw/ide/pci.c:440
  #26 0x000055555579b165 in pci_piix3_ide_init (bus=<optimized out>, hd_table=0x7fffffffd830, devfn=<optimized out>) at hw/ide/piix.c:218
  #27 0x000055555568ca55 in pc_init1 (machine=0x5555562960a0, pci_enabled=1, kvmclock_enabled=<optimized out>) at /home/berrange/src/virt/qemu/hw/i386/pc_piix.c:256
  #28 0x0000555555603ab2 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4249

So the safety net is correctly preventing QEMU reading cipher
text as if it were plain text, during startup and aborting QEMU
to avoid bad usage of this data.

For added fun this bug only happens if the encrypted qcow2
file happens to have data written to the first cluster,
otherwise the cluster won't be allocated and so qcow2 would
not try the decryption routines at all, just return all 0's.

That no one even noticed, let alone reported, this bug that
has shipped in 2.4.0, 2.5.0 and 2.6.0 shows that the number
of actual users of encrypted qcow2 is approximately zero.

So rather than fix the crash, and backport it to stable
releases, just go ahead with what we have warned users about
and disable any use of qcow2 encryption in the system
emulators. qemu-img/qemu-io/qemu-nbd are still able to access
qcow2 encrypted images for the sake of data conversion.

In the future, qcow2 will gain support for the alternative
luks format, but when this happens it'll be using the
'-object secret' infrastructure for getting keys, which
avoids this problematic scenario entirely.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
4 years agoblock: Assert that flags are in range
Eric Blake [Mon, 13 Jun 2016 18:56:35 +0000 (12:56 -0600)] 
block: Assert that flags are in range

Add a new BDRV_REQ_MASK constant, and use it to make sure that
caller flags are always valid.

Tested with 'make check' and with qemu-iotests on both '-raw'
and '-qcow2'; the only failure turned up was fixed in the
previous commit.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
4 years agoblock: Avoid bogus flags during mirroring
Eric Blake [Mon, 13 Jun 2016 18:56:34 +0000 (12:56 -0600)] 
block: Avoid bogus flags during mirroring

Commit e253f4b8 converted mirroring from sector-based bdrv_aio_*
to byte-based blk_aio_*, but failed to account for the subtle
difference in signatures (the former takes a semi-redundant length,
the latter takes a flags parameter).  Since all of our flags are
currently smaller in size than BDRV_SECTOR_SIZE, it has no ill
effects until we either perform sub-sector mirroring, or we start
asserting that no unexpected flags are set.  I found it while
testing new asserts when qemu-iotests 132 started warning about an
unknown flag 0x200000.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
4 years agoqemu-img bench: Fix uninitialised writethrough mode
Kevin Wolf [Tue, 14 Jun 2016 09:29:32 +0000 (11:29 +0200)] 
qemu-img bench: Fix uninitialised writethrough mode

If no -t option is specified, bool writethrough stayed uninitialised.
Initialise it as false, which makes cache=writeback the default cache
mode.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agom25p80: fix test on blk_pread() return value
Cédric Le Goater [Tue, 31 May 2016 11:36:05 +0000 (13:36 +0200)] 
m25p80: fix test on blk_pread() return value

commit 243e6f69c129 ("m25p80: Switch to byte-based block access")
replaced blk_read() calls with blk_pread() but return values are
different.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
4 years agohmp: acquire aio_context in hmp_qemu_io
Vladimir Sementsov-Ogievskiy [Wed, 8 Jun 2016 09:39:17 +0000 (12:39 +0300)] 
hmp: acquire aio_context in hmp_qemu_io

Acquire aio context before run command, this is mandatory for unit tests.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
4 years agoblockdev: clarify error on attempt to open locked tray
Colin Lord [Wed, 8 Jun 2016 17:56:28 +0000 (13:56 -0400)] 
blockdev: clarify error on attempt to open locked tray

When opening a device with a locked tray, gives an error explaining the
device tray is locked and that the user should wait and try again. This
is less confusing than the previous error, which simply stated that the
tray was locked.

Signed-off-by: Colin Lord <clord@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
4 years agoqcow2: Implement .bdrv_co_pwritev()
Kevin Wolf [Wed, 1 Jun 2016 14:55:05 +0000 (16:55 +0200)] 
qcow2: Implement .bdrv_co_pwritev()

This changes qcow2 to implement the byte-based .bdrv_co_pwritev
interface rather than the sector-based old one.

As preallocation uses the same allocation function as normal writes, and
the interface of that function needs to be changed, it is converted in
the same patch.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
4 years agoqcow2: Use bytes instead of sectors for QCowL2Meta
Kevin Wolf [Wed, 1 Jun 2016 12:08:56 +0000 (14:08 +0200)] 
qcow2: Use bytes instead of sectors for QCowL2Meta

In preparation for implementing .bdrv_co_pwritev in qcow2.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
4 years agoqcow2: Make copy_sectors() byte based
Kevin Wolf [Wed, 1 Jun 2016 13:21:05 +0000 (15:21 +0200)] 
qcow2: Make copy_sectors() byte based

This will allow copy on write operations where the overwritten part of
the cluster is not aligned to sector boundaries.

Also rename the function because it has nothing to do with sectors any
more.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
4 years agoqcow2: Implement .bdrv_co_preadv()
Kevin Wolf [Tue, 31 May 2016 14:13:07 +0000 (16:13 +0200)] 
qcow2: Implement .bdrv_co_preadv()

Reading from qcow2 images is now byte granularity.

Most of the affected code in qcow2 actually gets simpler with this
change. The only exception is encryption, which is fixed on 512 bytes
blocks; in order to keep this working, bs->request_alignment is set for
encrypted images.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
4 years agoqcow2: Work with bytes in qcow2_get_cluster_offset()
Kevin Wolf [Tue, 31 May 2016 14:41:09 +0000 (16:41 +0200)] 
qcow2: Work with bytes in qcow2_get_cluster_offset()

This patch changes the units that qcow2_get_cluster_offset() uses
internally, without touching the interface just yet. This will be done
in another patch.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
4 years agoMerge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.7-4' into...
Peter Maydell [Thu, 16 Jun 2016 09:53:33 +0000 (10:53 +0100)] 
Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.7-4' into staging

Migration:

- Fixes for TLS series
- Postcopy: Add stats, fix, test case

# gpg: Signature made Thu 16 Jun 2016 05:40:09 BST
# gpg:                using RSA key 0xEB0B4DFC657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg:                 aka "Amit Shah <amit@kernel.org>"
# gpg:                 aka "Amit Shah <amitshah@gmx.net>"
# Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337  2735 1E9A 3B5F 8540 83B6
#      Subkey fingerprint: CC63 D332 AB8F 4617 4529  6534 EB0B 4DFC 657E F670

* remotes/amit-migration/tags/migration-for-2.7-4:
  migration: rename functions to starting migrations
  migration: fix typos in qapi-schema from latest migration additions
  Postcopy: Check for support when setting the capability
  tests: fix libqtest socket timeouts
  test: Postcopy
  Postcopy: Add stats on page requests
  Migration: Split out ram part of qmp_query_migrate
  Postcopy: Avoid 0 length discards

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agomigration: rename functions to starting migrations
Daniel P. Berrange [Wed, 1 Jun 2016 10:17:14 +0000 (11:17 +0100)] 
migration: rename functions to starting migrations

Apply the following renames for starting incoming migration:

 process_incoming_migration -> migration_fd_process_incoming
 migration_set_incoming_channel -> migration_channel_process_incoming
 migration_tls_set_incoming_channel -> migration_tls_channel_process_incoming

and for starting outgoing migration:

 migration_set_outgoing_channel -> migration_channel_connect
 migration_tls_set_outgoing_channel -> migration_tls_channel_connect

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1464776234-9910-3-git-send-email-berrange@redhat.com
Message-Id: <1464776234-9910-3-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
4 years agomigration: fix typos in qapi-schema from latest migration additions
Daniel P. Berrange [Wed, 1 Jun 2016 10:17:13 +0000 (11:17 +0100)] 
migration: fix typos in qapi-schema from latest migration additions

Recent migration QAPI enhancements had a few spelling mistakes
and also incorrect version number in a few places.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1464776234-9910-2-git-send-email-berrange@redhat.com
Message-Id: <1464776234-9910-2-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
4 years agoPostcopy: Check for support when setting the capability
Dr. David Alan Gilbert [Mon, 13 Jun 2016 11:16:45 +0000 (12:16 +0100)] 
Postcopy: Check for support when setting the capability

Knowing whether the destination host supports migration with
postcopy can be tricky.
The destination doesn't need the capability set, however
if we set it then use the opportunity to do the test and
tell the user/management layer early.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1465816605-29488-7-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-7-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
4 years agotests: fix libqtest socket timeouts
Andrea Arcangeli [Mon, 13 Jun 2016 11:16:44 +0000 (12:16 +0100)] 
tests: fix libqtest socket timeouts

I kept getting timeouts and unix socket accept failures under high
load, the patch fixes it.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Message-id: 1465816605-29488-6-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-6-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
4 years agotest: Postcopy
Dr. David Alan Gilbert [Mon, 13 Jun 2016 11:16:43 +0000 (12:16 +0100)] 
test: Postcopy

This is a postcopy test (x86 only) that actually runs the guest
and checks the memory contents.

The test runs from an x86 boot block with the hex embedded in the test;
the source for this is:

...........

.code16
.org 0x7c00
.file "fill.s"
.text
.globl start
.type start, @function
start:             # at 0x7c00 ?
        cli
        lgdt gdtdesc
        mov $1,%eax
        mov %eax,%cr0  # Protected mode enable
        data32 ljmp $8,$0x7c20

.org 0x7c20
.code32
        # A20 enable - not sure I actually need this
        inb $0x92,%al
        or  $2,%al
        outb %al, $0x92

        # set up DS for the whole of RAM (needed on KVM)
        mov $16,%eax
        mov %eax,%ds

        mov $65,%ax
        mov $0x3f8,%dx
        outb %al,%dx

        # bl keeps a counter so we limit the output speed
        mov $0, %bl
mainloop:
        # Start from 1MB
        mov $(1024*1024),%eax
innerloop:
        incb (%eax)
        add $4096,%eax
        cmp $(100*1024*1024),%eax
        jl innerloop

        inc %bl
        jnz mainloop

        mov $66,%ax
        mov $0x3f8,%dx
        outb %al,%dx

jmp mainloop

        # GDT magic from old (GPLv2)  Grub startup.S
        .p2align        2       /* force 4-byte alignment */
gdt:
        .word   0, 0
        .byte   0, 0, 0, 0

        /* -- code segment --
         * base = 0x00000000, limit = 0xFFFFF (4 KiB Granularity), present
         * type = 32bit code execute/read, DPL = 0
         */
        .word   0xFFFF, 0
        .byte   0, 0x9A, 0xCF, 0

        /* -- data segment --
         * base = 0x00000000, limit 0xFFFFF (4 KiB Granularity), present
         * type = 32 bit data read/write, DPL = 0
         */
        .word   0xFFFF, 0
        .byte   0, 0x92, 0xCF, 0

gdtdesc:
        .word   0x27                    /* limit */
        .long   gdt                     /* addr */

/* I'm a bootable disk */
.org 0x7dfe
        .byte 0x55
        .byte 0xAA

...........

and that can be assembled by the following magic:
    as --32 -march=i486 fill.s -o fill.o
    objcopy -O binary fill.o fill.boot
    dd if=fill.boot of=bootsect bs=256 count=2 skip=124
    xxd -i bootsect

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Message-id: 1465816605-29488-5-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-5-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
4 years agoPostcopy: Add stats on page requests
Dr. David Alan Gilbert [Mon, 13 Jun 2016 11:16:42 +0000 (12:16 +0100)] 
Postcopy: Add stats on page requests

On the source, add a count of page requests received from the
destination.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-id: 1465816605-29488-4-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-4-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
4 years agoMigration: Split out ram part of qmp_query_migrate
Dr. David Alan Gilbert [Mon, 13 Jun 2016 11:16:41 +0000 (12:16 +0100)] 
Migration: Split out ram part of qmp_query_migrate

The RAM section of qmp_query_migrate is reasonably complex
and repeated 3 times.  Split it out into a helper.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1465816605-29488-3-git-send-email-dgilbert@redhat.com
Reviwed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <1465816605-29488-3-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
4 years agoPostcopy: Avoid 0 length discards
Dr. David Alan Gilbert [Mon, 13 Jun 2016 11:16:40 +0000 (12:16 +0100)] 
Postcopy: Avoid 0 length discards

The discard code in migration/ram.c would send request for
zero length discards in the case where no discards were needed.
It doesn't appear to have had any bad effect.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-id: 1465816605-29488-2-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-2-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
4 years agoMerge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
Peter Maydell [Wed, 15 Jun 2016 15:12:19 +0000 (16:12 +0100)] 
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging

X86 queue, 2016-06-14 (v2)

# gpg: Signature made Tue 14 Jun 2016 22:29:04 BST
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-pull-request:
  target-i386: Consolidate calls of object_property_parse() in x86_cpu_parse_featurestr
  target-i386: Use cpu_generic_init() in cpu_x86_init()
  target-i386: Move xcc->kvm_required check to realize time
  target-i386: Remove assert(kvm_enabled()) from host_x86_cpu_initfn()
  target-i386: Move features logic that requires CPUState to realize time
  target-i386: Remove xlevel & hv-spinlocks option fixups
  target-i386: Implement CPUID[0xB] (Extended Topology Enumeration)
  pc: Add 2.7 machine
  target-i386: add Skylake-Client cpu model

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agotarget-i386: Consolidate calls of object_property_parse() in x86_cpu_parse_featurestr
Eduardo Habkost [Thu, 9 Jun 2016 17:10:58 +0000 (19:10 +0200)] 
target-i386: Consolidate calls of object_property_parse() in x86_cpu_parse_featurestr

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
4 years agotarget-i386: Use cpu_generic_init() in cpu_x86_init()
Igor Mammedov [Mon, 6 Jun 2016 15:16:46 +0000 (17:16 +0200)] 
target-i386: Use cpu_generic_init() in cpu_x86_init()

Now cpu_x86_init() does nothing more or less
than duplicating cpu_generic_init() logic.
So simplify it by using cpu_generic_init().

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
4 years agotarget-i386: Move xcc->kvm_required check to realize time
Igor Mammedov [Mon, 6 Jun 2016 15:16:45 +0000 (17:16 +0200)] 
target-i386: Move xcc->kvm_required check to realize time

It will allow to drop custom cpu_x86_init() and use
cpu_generic_init() instead, reducing cpu_x86_create()
to a simple 3-liner.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
4 years agotarget-i386: Remove assert(kvm_enabled()) from host_x86_cpu_initfn()
Eduardo Habkost [Fri, 10 Jun 2016 11:42:08 +0000 (08:42 -0300)] 
target-i386: Remove assert(kvm_enabled()) from host_x86_cpu_initfn()

The code will be changed to allow creation of the CPU object and
report kvm_required errors only at realizefn, so we need to make
the instance_init function more flexible.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
4 years agotarget-i386: Move features logic that requires CPUState to realize time
Igor Mammedov [Mon, 6 Jun 2016 15:16:44 +0000 (17:16 +0200)] 
target-i386: Move features logic that requires CPUState to realize time

Making x86_cpu_parse_featurestr() a pure convertor
of legacy feature string into global properties, needs
it to be called before a CPU instance is created so
parser shouldn't modify CPUState directly or access
it at all. Hence move current hack that directly pokes
into CPUState, to set/unset +-feats, from parser to
CPU's realize method.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
4 years agotarget-i386: Remove xlevel & hv-spinlocks option fixups
Eduardo Habkost [Thu, 2 Jun 2016 16:46:13 +0000 (13:46 -0300)] 
target-i386: Remove xlevel & hv-spinlocks option fixups

The "fixup will be removed in future versions" warnings are
present since QEMU 1.7.0, at least, so users should have fixed
their scripts and configurations, already.

In the case of libvirt users, libvirt doesn't use the "xlevel"
option, and already rejects HyperV spinlock retry count < 0xFFF.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
4 years agotarget-i386: Implement CPUID[0xB] (Extended Topology Enumeration)
Radim Krčmář [Thu, 12 May 2016 17:24:26 +0000 (19:24 +0200)] 
target-i386: Implement CPUID[0xB] (Extended Topology Enumeration)

I looked at a dozen Intel CPU that have this CPUID and all of them
always had Core offset as 1 (a wasted bit when hyperthreading is
disabled) and Package offset at least 4 (wasted bits at <= 4 cores).

QEMU uses more compact IDs and it doesn't make much sense to change it
now.  I keep the SMT and Core sub-leaves even if there is just one
thread/core;  it makes the code simpler and there should be no harm.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
4 years agopc: Add 2.7 machine
Igor Mammedov [Tue, 17 May 2016 14:43:10 +0000 (16:43 +0200)] 
pc: Add 2.7 machine

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
4 years agotarget-i386: add Skylake-Client cpu model
Eduardo Habkost [Wed, 27 Apr 2016 08:13:06 +0000 (16:13 +0800)] 
target-i386: add Skylake-Client cpu model

Introduce Skylake-Client cpu mode which inherits the features from
Broadwell and supports some additional features that are: MPX,
XSAVEC, and XGETBV1.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
4 years agoMerge remote-tracking branch 'remotes/sstabellini/tags/xen-20160614-tag' into staging
Peter Maydell [Tue, 14 Jun 2016 15:32:32 +0000 (16:32 +0100)] 
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20160614-tag' into staging

Xen 2016/06/14

# gpg: Signature made Tue 14 Jun 2016 16:01:52 BST
# gpg:                using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3  0AEA 894F 8F48 70E1 AE90

* remotes/sstabellini/tags/xen-20160614-tag:
  xen: Clean up includes
  xen/blkif: avoid double access to any shared ring request fields

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoMerge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160614-2' into...
Peter Maydell [Tue, 14 Jun 2016 15:04:25 +0000 (16:04 +0100)] 
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160614-2' into staging

target-arm queue:
 * add PMU support for virt machine under KVM
 * fix reset and migration of TTBCR(S)
 * add virt-2.7 machine type
 * QOMify various ARM devices
 * implement xilinx DisplayPort device
 * don't permit ARMv8-only Neon insns to work on ARMv7

# gpg: Signature made Tue 14 Jun 2016 16:01:45 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20160614-2: (30 commits)
  target-arm: Don't permit ARMv8-only Neon insns on ARMv7
  arm: xlnx-zynqmp: Add xlnx-dp and xlnx-dpdma
  introduce xlnx-dp
  introduce xlnx-dpdma
  hw/i2c-ddc.c: Implement DDC I2C slave
  introduce dpcd module
  introduce aux-bus
  i2c: Factor our send() and recv() common logic
  i2c: implement broadcast write
  i2cbus: remove unused dev field
  hw/sd: QOM'ify pl181.c
  hw/dma: QOM'ify pxa2xx_dma.c
  hw/misc: QOM'ify mst_fpga.c
  hw/misc: QOM'ify exynos4210_pmu.c
  hw/misc: QOM'ify arm_l2x0.c
  hw/gpio: QOM'ify zaurus.c
  hw/gpio: QOM'ify pl061.c
  hw/gpio: QOM'ify omap_gpio.c
  hw/i2c: QOM'ify versatile_i2c.c
  hw/i2c: QOM'ify omap_i2c.c
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agotarget-arm: Don't permit ARMv8-only Neon insns on ARMv7
Peter Maydell [Tue, 14 Jun 2016 14:59:15 +0000 (15:59 +0100)] 
target-arm: Don't permit ARMv8-only Neon insns on ARMv7

The Neon instructions VCVTA, VCVTM, VCVTN, VCVTP, VRINTA, VRINTM,
VRINTN, VRINTP, VRINTX, and VRINTZ were only introduced with ARMv8,
so they need a guard to make them UNDEF if the CPU only supports ARMv7.
(We got this right for all the other new-in-v8 insns, but forgot
it for these Neon 2-reg-misc ops.)

Reported-by: Christophe Lyon <christophe.lyon@linaro.org>
Tested-by: Christophe Lyon <christophe.lyon@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465492511-9333-1-git-send-email-peter.maydell@linaro.org

4 years agoarm: xlnx-zynqmp: Add xlnx-dp and xlnx-dpdma
KONRAD Frederic [Tue, 14 Jun 2016 14:59:15 +0000 (15:59 +0100)] 
arm: xlnx-zynqmp: Add xlnx-dp and xlnx-dpdma

This adds the DP and the DPDMA to the Zynq MP platform.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-10-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agointroduce xlnx-dp
KONRAD Frederic [Tue, 14 Jun 2016 14:59:15 +0000 (15:59 +0100)] 
introduce xlnx-dp

This is the implementation of the DisplayPort.
It has an aux-bus to access dpcd and edid.

Graphic plane is connected to the channel 3.
Video plane is connected to the channel 0.
Audio stream are connected to the channels 4 and 5.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1465833014-21982-9-git-send-email-fred.konrad@greensocs.com
[PMM: fixed format strings]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agointroduce xlnx-dpdma
KONRAD Frederic [Tue, 14 Jun 2016 14:59:15 +0000 (15:59 +0100)] 
introduce xlnx-dpdma

This is the implementation of the DPDMA.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agohw/i2c-ddc.c: Implement DDC I2C slave
Peter Maydell [Tue, 14 Jun 2016 14:59:15 +0000 (15:59 +0100)] 
hw/i2c-ddc.c: Implement DDC I2C slave

Implement an I2C slave which implements DDC and returns the
EDID data for an attached monitor.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1465833014-21982-7-git-send-email-fred.konrad@greensocs.com

  - Rebased on the current master.
  - Modified for QOM.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
[PMM: actually wire up the vmstate to dc->vmsd]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agointroduce dpcd module
KONRAD Frederic [Tue, 14 Jun 2016 14:59:15 +0000 (15:59 +0100)] 
introduce dpcd module

This introduces dpcd module.
It wires on a aux-bus and can be accessed by the driver to get lane-speed, etc.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agointroduce aux-bus
KONRAD Frederic [Tue, 14 Jun 2016 14:59:15 +0000 (15:59 +0100)] 
introduce aux-bus

This introduces a new bus: aux-bus.

It contains an address space for aux slaves devices and a bridge to an I2C bus
for I2C through AUX transactions.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1465833014-21982-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoi2c: Factor our send() and recv() common logic
Peter Crosthwaite [Tue, 14 Jun 2016 14:59:14 +0000 (15:59 +0100)] 
i2c: Factor our send() and recv() common logic

Most of the control flow logic between send and recv (error checking
etc) is the same. Factor this out into a common send_recv() API.
This is then usable by clients, where the control logic for send
and receive differs only by a boolean. E.g.

if (send)
   i2c_send(...):
else
   i2c_recv(...);

becomes:

i2c_send_recv(... , send);

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1465833014-21982-4-git-send-email-fred.konrad@greensocs.com
Changes from FK:
  * Rebased on master.
  * Rebased on my i2c broadcast patch.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoi2c: implement broadcast write
KONRAD Frederic [Tue, 14 Jun 2016 14:59:14 +0000 (15:59 +0100)] 
i2c: implement broadcast write

This does a write to every slaves when the I2C bus get a write to address 0.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoi2cbus: remove unused dev field
KONRAD Frederic [Tue, 14 Jun 2016 14:59:14 +0000 (15:59 +0100)] 
i2cbus: remove unused dev field

The dev field in i2cbus is not used.
So just drop it.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agohw/sd: QOM'ify pl181.c
xiaoqiang zhao [Tue, 14 Jun 2016 14:59:14 +0000 (15:59 +0100)] 
hw/sd: QOM'ify pl181.c

split the old SysBus init function into an instance_init
and a Device realize function

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-13-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agohw/dma: QOM'ify pxa2xx_dma.c
xiaoqiang zhao [Tue, 14 Jun 2016 14:59:14 +0000 (15:59 +0100)] 
hw/dma: QOM'ify pxa2xx_dma.c

split the old SysBus init function into an instance_init
and a Device realize function

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-12-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agohw/misc: QOM'ify mst_fpga.c
xiaoqiang zhao [Tue, 14 Jun 2016 14:59:14 +0000 (15:59 +0100)] 
hw/misc: QOM'ify mst_fpga.c

Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-11-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agohw/misc: QOM'ify exynos4210_pmu.c
xiaoqiang zhao [Tue, 14 Jun 2016 14:59:14 +0000 (15:59 +0100)] 
hw/misc: QOM'ify exynos4210_pmu.c

Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-10-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agohw/misc: QOM'ify arm_l2x0.c
xiaoqiang zhao [Tue, 14 Jun 2016 14:59:14 +0000 (15:59 +0100)] 
hw/misc: QOM'ify arm_l2x0.c

Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-9-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agohw/gpio: QOM'ify zaurus.c
xiaoqiang zhao [Tue, 14 Jun 2016 14:59:13 +0000 (15:59 +0100)] 
hw/gpio: QOM'ify zaurus.c

Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-8-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agohw/gpio: QOM'ify pl061.c
xiaoqiang zhao [Tue, 14 Jun 2016 14:59:13 +0000 (15:59 +0100)] 
hw/gpio: QOM'ify pl061.c

* Merge the pl061_initfn into pl061_init
* Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-7-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agohw/gpio: QOM'ify omap_gpio.c
xiaoqiang zhao [Tue, 14 Jun 2016 14:59:13 +0000 (15:59 +0100)] 
hw/gpio: QOM'ify omap_gpio.c

* Split the old SysBus init into an instance_init and
  DeviceClass::realize function
* Drop the SysBus init function

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-6-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agohw/i2c: QOM'ify versatile_i2c.c
xiaoqiang zhao [Tue, 14 Jun 2016 14:59:13 +0000 (15:59 +0100)] 
hw/i2c: QOM'ify versatile_i2c.c

Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-5-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agohw/i2c: QOM'ify omap_i2c.c
xiaoqiang zhao [Tue, 14 Jun 2016 14:59:13 +0000 (15:59 +0100)] 
hw/i2c: QOM'ify omap_i2c.c

* Split the omap_i2c_init into an instance_init and realize function
* Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-4-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agohw/i2c: QOM'ify exynos4210_i2c.c
xiaoqiang zhao [Tue, 14 Jun 2016 14:59:13 +0000 (15:59 +0100)] 
hw/i2c: QOM'ify exynos4210_i2c.c

* Rename the exynos4210_i2c_realize to exynos4210_i2c_init
* Drop the old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-3-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>