qemu.git
3 years agoqapi2texi: Fix up output around #optional
Markus Armbruster [Wed, 15 Mar 2017 12:56:59 +0000 (13:56 +0100)] 
qapi2texi: Fix up output around #optional

We use tag #optional to mark optional members, like this:

    # @name: #optional The name of the guest

texi_body() strips #optional, but not whitespace around it.  For the
above, we get in qemu-qmp-qapi.texi

    @item @code{'name'} (optional)
     The name of the guest
    @end table

The extra space can lead to artifacts in output, e.g in
qemu-qmp-ref.7.pod

    =item C<'name'> (optional)

     The name of the guest

and then in qemu-qmp-ref.7

    .IX Item "name (optional)"
    .Vb 1
    \& The name of the guest
    .Ve

instead of intended plain

    .IX Item "name (optional)"
    The name of the guest

Get rid of these artifacts by removing whitespace around #optional
along with it.

This turns three minus signs in qapi-schema.json into markup, because
they're now at the beginning of the line.  Drop them, they're unwanted
there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1489582656-31133-11-git-send-email-armbru@redhat.com>

3 years agoqapi: Fix to reject empty union base gracefully
Markus Armbruster [Wed, 15 Mar 2017 12:56:58 +0000 (13:56 +0100)] 
qapi: Fix to reject empty union base gracefully

Common Python pitfall: 'assert base_members' fires on [] in addition
to None.  Correct to 'assert base_members is not None'.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-10-git-send-email-armbru@redhat.com>

3 years agotests/qapi-schema: Cover empty union base
Markus Armbruster [Wed, 15 Mar 2017 12:56:57 +0000 (13:56 +0100)] 
tests/qapi-schema: Cover empty union base

The new test case shows off qapi.py choking on an empty union base.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-9-git-send-email-armbru@redhat.com>

3 years agoqapi: Clean up build of generated documentation
Markus Armbruster [Wed, 15 Mar 2017 12:56:56 +0000 (13:56 +0100)] 
qapi: Clean up build of generated documentation

Rename intermediate qemu-qapi.texi to qemu-qmp-qapi.texi to match its
user qemu-qmp-ref.texi, just like qemu-ga-qapi.texi matches
qemu-ga-ref.texi.

Build the intermediate .texi next to the sources and the final output
in docs/ instead of dumping them into the build root.

Fix version.texi dependencies so that only the targets that actually
need it depend on it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-8-git-send-email-armbru@redhat.com>

3 years agoqapi: Have each QAPI schema declare its name rule violations
Markus Armbruster [Wed, 15 Mar 2017 12:56:55 +0000 (13:56 +0100)] 
qapi: Have each QAPI schema declare its name rule violations

qapi.py has a hardcoded white-list of type names that may violate the
rule on use of upper and lower case.  Add a new pragma directive
'name-case-whitelist', and use it to replace the hard-coded
white-list.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1489582656-31133-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
3 years agoqapi: Have each QAPI schema declare its returns white-list
Markus Armbruster [Wed, 15 Mar 2017 12:56:54 +0000 (13:56 +0100)] 
qapi: Have each QAPI schema declare its returns white-list

qapi.py has a hardcoded white-list of command names that may violate
the rules on permitted return types.  Add a new pragma directive
'returns-whitelist', and use it to replace the hard-coded white-list.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1489582656-31133-6-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
3 years agodocs/qapi-code-gen.txt: Drop confusing reference to 'gen'
Markus Armbruster [Wed, 15 Mar 2017 12:56:53 +0000 (13:56 +0100)] 
docs/qapi-code-gen.txt: Drop confusing reference to 'gen'

Section "Commands" qualifies its rules on permitted argument and
return types "with one exception noted below when 'gen' is used".  The
note went away in commit 2d21291.  Clean up the dangling references.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1489582656-31133-5-git-send-email-armbru@redhat.com>

3 years agoqapi: Back out doc comments added just to please qapi.py
Markus Armbruster [Wed, 15 Mar 2017 12:56:52 +0000 (13:56 +0100)] 
qapi: Back out doc comments added just to please qapi.py

This reverts commit 3313b61's changes to tests/qapi-schema/, except
for tests/qapi-schema/doc-*.

We could keep some of these doc comments to serve as positive test
cases.  However, they don't actually add to what we get from doc
comment use in actual schemas, as we we don't test output matches
expectations, and don't systematically cover doc comment features.
Proper positive test coverage would be nice.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-4-git-send-email-armbru@redhat.com>

3 years agoqapi: Make doc comments optional where we don't need them
Markus Armbruster [Wed, 15 Mar 2017 12:56:51 +0000 (13:56 +0100)] 
qapi: Make doc comments optional where we don't need them

Since we added the documentation generator in commit 3313b61, doc
comments are mandatory.  That's a very good idea for a schema that
needs to be documented, but has proven to be annoying for testing.

Make doc comments optional again, but add a new directive

    { 'pragma': { 'doc-required': true } }

to let a QAPI schema require them.

Add test cases for the new pragma directive.  While there, plug a
minor hole in includ directive test coverage.

Require documentation in the schemas we actually want documented:
qapi-schema.json and qga/qapi-schema.json.

We could probably make qapi2texi.py cope with incomplete
documentation, but for now, simply make it refuse to run unless the
schema has 'doc-required': true.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1489582656-31133-3-git-send-email-armbru@redhat.com>
[qapi-code-gen.txt wording tweaked]
Reviewed-by: Eric Blake <eblake@redhat.com>
3 years agoqapi: Factor QAPISchemaParser._include() out of .__init__()
Markus Armbruster [Wed, 15 Mar 2017 12:56:50 +0000 (13:56 +0100)] 
qapi: Factor QAPISchemaParser._include() out of .__init__()

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1489582656-31133-2-git-send-email-armbru@redhat.com>

3 years agoqmp: allow setting properties to empty string in qmp-shell
Daniel P. Berrange [Thu, 2 Mar 2017 12:24:29 +0000 (12:24 +0000)] 
qmp: allow setting properties to empty string in qmp-shell

The qmp-shell property parser currently rejects attempts to
set string properties to the empty string eg

  (QEMU) migrate-set-parameters  tls-hostname=
  Error while parsing command line: Expected a key=value pair, got 'tls-hostname='
command format: <command-name>  [arg-name1=arg1] ... [arg-nameN=argN]

This is caused by checking the wrong condition after splitting
the parameter on '='. The "partition" method will return "" for
the separator field, if the seperator was not present, so that
is the correct thing to check for malformed syntax.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170302122429.7737-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
3 years agoqapi2texi: change texi formatters
Marc-André Lureau [Wed, 25 Jan 2017 13:03:07 +0000 (17:03 +0400)] 
qapi2texi: change texi formatters

STRUCT_FMT is generic enough, rename it to TYPE_FMT, use it for unions.

Rename COMMAND_FMT to MSG_FMT, since it applies to both commands and
events.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170125130308.16104-2-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
3 years agoMerge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
Peter Maydell [Wed, 15 Mar 2017 18:44:05 +0000 (18:44 +0000)] 
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pc: fixes

Some fixes to fallback from using virtio caching,
pls a minor vm gen id fix.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 15 Mar 2017 17:59:25 GMT
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  virtio-pci: reset modern vq meta data
  Revert "virtio: unbreak virtio-pci with IOMMU after caching ring translations"
  pci: introduce a bus master container
  virtio: validate address space cache during init
  virtio: destroy region cache during reset
  virtio: guard against NULL pfn
  Bugfix: Handle error if VM Generation ID device not present

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agovirtio-pci: reset modern vq meta data
Jason Wang [Tue, 14 Mar 2017 07:25:05 +0000 (15:25 +0800)] 
virtio-pci: reset modern vq meta data

We don't reset proxy->vqs[].{num|desc[]|avail[]|used[]}. This means if
a driver enable the vq without setting vq address after reset. The old
addresses were leaked. Fixing this by resetting modern vq meta data
during device reset.

Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agoRevert "virtio: unbreak virtio-pci with IOMMU after caching ring translations"
Jason Wang [Mon, 13 Mar 2017 03:29:57 +0000 (11:29 +0800)] 
Revert "virtio: unbreak virtio-pci with IOMMU after caching ring translations"

This reverts commit
96a8821d21411f10d77ea994af369c6e5c35a2cc. Previous patch is a better
solution which does not require a strict order between virtio and IOMMU.

CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
3 years agoMerge remote-tracking branch 'remotes/armbru/tags/pull-misc-2017-03-15' into staging
Peter Maydell [Wed, 15 Mar 2017 17:54:41 +0000 (17:54 +0000)] 
Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2017-03-15' into staging

Miscellaneous patches for 2017-03-15

# gpg: Signature made Wed 15 Mar 2017 13:12:35 GMT
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2017-03-15:
  coverity-model: model address_space_read/write
  tests: Use error_free_or_abort() where appropriate

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agopci: introduce a bus master container
Jason Wang [Mon, 13 Mar 2017 03:29:58 +0000 (11:29 +0800)] 
pci: introduce a bus master container

96a8821d2141 ("virtio: unbreak virtio-pci with IOMMU after caching ring
translations") tries to make IOMMU works with virtio memory region
cache, but it requires IOMMU to be created before any virtio
devices. This is sub optimal, fixing this by introduce a bus master
container to make sure address space can be initialized during device
registering, and then we can safely set alias and make
bus_master_enable_region as its subregion during bus master
initialization.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agovirtio: validate address space cache during init
Jason Wang [Wed, 15 Mar 2017 11:48:32 +0000 (19:48 +0800)] 
virtio: validate address space cache during init

We don't check the return value of address_space_cache_init(), this
may lead buggy driver use incorrect region caches. Instead of
triggering an assert, catch and warn this early in
virtio_init_region_cache().

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agovirtio: destroy region cache during reset
Jason Wang [Wed, 15 Mar 2017 11:48:31 +0000 (19:48 +0800)] 
virtio: destroy region cache during reset

We don't destroy region cache during reset which can make the maps
of previous driver leaked to a buggy or malicious driver that don't
set vring address before starting to use the device. Fix this by
destroy the region cache during reset and validate it before trying to
see them.

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agovirtio: guard against NULL pfn
Jason Wang [Wed, 15 Mar 2017 11:48:30 +0000 (19:48 +0800)] 
virtio: guard against NULL pfn

To avoid access stale memory region cache after reset, this patch
check the existence of virtqueue pfn for all exported virtqueue access
helpers before trying to use them.

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agoBugfix: Handle error if VM Generation ID device not present
Ben Warren [Thu, 2 Mar 2017 21:36:50 +0000 (13:36 -0800)] 
Bugfix: Handle error if VM Generation ID device not present

This was crashing due to NULL-pointer dereference

QMP Test case:
==============

(QEMU) query-vm-generation-id
{"error": {"class": "GenericError", "desc": "VM Generation ID device not
found"}}

HMP Test case:
==============
virsh # qemu-monitor-command --hmp 3 info vm-generation-id
VM Generation ID device not found

Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
3 years agoMerge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Peter Maydell [Wed, 15 Mar 2017 14:19:59 +0000 (14:19 +0000)] 
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

# gpg: Signature made Wed 15 Mar 2017 05:05:04 GMT
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  os: don't corrupt pre-existing memory-backend data with prealloc

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoMerge remote-tracking branch 'remotes/ehabkost/tags/machine-pull-request' into staging
Peter Maydell [Wed, 15 Mar 2017 13:07:07 +0000 (13:07 +0000)] 
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-pull-request' into staging

Fix global property and -cpu handling bug

This bug fix was supposed to be applied just after 2.8.0 was
released, but it slipped through the cracks. Sending it now for
the next -rc.

# gpg: Signature made Tue 14 Mar 2017 20:04:50 GMT
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-pull-request:
  machine: Convert abstract typename on compat_props to subclass names

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agocoverity-model: model address_space_read/write
Paolo Bonzini [Wed, 15 Mar 2017 08:16:41 +0000 (09:16 +0100)] 
coverity-model: model address_space_read/write

Commit eb7eeb8 ("memory: split address_space_read and
address_space_write", 2015-12-17) made address_space_rw
dispatch to one of address_space_read or address_space_write,
rather than vice versa.

For callers of address_space_read and address_space_write this
causes false positive defects when Coverity sees a length-8 write in
address_space_read and a length-4 (e.g. int*) buffer to read into.
As long as the size of the buffer is okay, this is a false positive.

Reflect the code change into the model.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170315081641.20588-1-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
3 years agotests: Use error_free_or_abort() where appropriate
Markus Armbruster [Fri, 17 Feb 2017 20:15:54 +0000 (21:15 +0100)] 
tests: Use error_free_or_abort() where appropriate

Done with this Coccinelle semantic patch:

    @@
    expression E;
    @@
    -    g_assert(E);
    -    error_free(E);
    +    error_free_or_abort(&E);

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487362554-5688-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
3 years agoos: don't corrupt pre-existing memory-backend data with prealloc
Daniel P. Berrange [Fri, 3 Mar 2017 11:32:55 +0000 (11:32 +0000)] 
os: don't corrupt pre-existing memory-backend data with prealloc

When using a memory-backend object with prealloc turned on, QEMU
will memset() the first byte in every memory page to zero. While
this might have been acceptable for memory backends associated
with RAM, this corrupts application data for NVDIMMs.

Instead of setting every page to zero, read the current byte
value and then just write that same value back, so we are not
corrupting the original data. Directly write the value instead
of memset()ing it, since there's no benefit to memset for a
single byte write.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Message-id: 20170303113255.28262-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
3 years agomachine: Convert abstract typename on compat_props to subclass names
Eduardo Habkost [Mon, 12 Dec 2016 20:49:05 +0000 (18:49 -0200)] 
machine: Convert abstract typename on compat_props to subclass names

Original problem description by Greg Kurz:

> Since commit "9a4c0e220d8a hw/virtio-pci: fix virtio
> behaviour", passing -device virtio-blk-pci.disable-modern=off
> has no effect on 2.6 machine types because the internal
> virtio-pci.disable-modern=on compat property always prevail.

The same bug also affects other abstract type names mentioned on
compat_props by machine-types: apic-common, i386-cpu, pci-device,
powerpc64-cpu, s390-skeys, spapr-pci-host-bridge, usb-device,
virtio-pci, x86_64-cpu.

The right fix for this problem is to make sure compat_props and
-global options are always applied in the order they are
registered, instead of reordering them based on the type
hierarchy. But changing the ordering rules of -global is risky
and might break existing configurations, so we shouldn't do that
on a stable branch.

This is a temporary hack that will work around the bug when
registering compat_props properties: if we find an abstract class
on compat_props, register properties for all its non-abstract
subtypes instead. This will make sure -global won't be overridden
by compat_props, while keeping the existing ordering rules on
-global options.

Note that there's one case that won't be fixed by this hack:
"-global spapr-pci-vfio-host-bridge.<option>=<value>" won't be
able to override compat_props, because spapr-pci-host-bridge is
not an abstract class.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1481575745-26120-1-git-send-email-ehabkost@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
3 years agoUpdate version for v2.9.0-rc0 release v2.9.0-rc0
Peter Maydell [Tue, 14 Mar 2017 19:18:23 +0000 (19:18 +0000)] 
Update version for v2.9.0-rc0 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoMerge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Peter Maydell [Tue, 14 Mar 2017 16:52:17 +0000 (16:52 +0000)] 
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* "x" monitor command fix for KVM (Christian)
* MemoryRegion name documentation (David)
* mem-prealloc optimization (Jitendra)
* -icount/MTTCG fixes (me)
* "info mtree" niceness (Peter)
* NBD drop_sync buffer overflow (Vladimir/Eric)
* small cleanups and bugfixes (Li, Lin, Suramya, Thomas)
* fix for "-device kvmclock" w/TCG (Eduardo)
* debug output before crashing on KVM_{GET,SET}_MSRS (Eduardo)

# gpg: Signature made Tue 14 Mar 2017 13:42:05 GMT
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  nbd/client: fix drop_sync [CVE-2017-2630]
  memory: info mtree check mr range overflow
  icount: process QEMU_CLOCK_VIRTUAL timers in vCPU thread
  main-loop: remove now unnecessary optimization
  cpus: define QEMUTimerListNotifyCB for QEMU system emulation
  qemu-timer: do not include sysemu/cpus.h from util/qemu-timer.h
  qemu-timer: fix off-by-one
  target/nios2: take BQL around interrupt check
  scsi: mptsas: fix the wrong reading size in fetch request
  util: Removed unneeded header from path.c
  configure: add the missing help output for optional features
  scripts/dump-guest-memory.py: fix int128_get64 on recent gcc
  kvmclock: Don't crash QEMU if KVM is disabled
  kvm: Print MSR information if KVM_{GET,SET}_MSRS failed
  exec: add cpu_synchronize_state to cpu_memory_rw_debug
  mem-prealloc: reduce large guest start-up and migration time.
  docs: Add a note about mixing bootindex with "-boot order"
  memory_region: Fix name comments

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agohw/misc/imx6_src: Don't crash trying to reset missing CPUs
Peter Maydell [Fri, 3 Mar 2017 11:59:34 +0000 (11:59 +0000)] 
hw/misc/imx6_src: Don't crash trying to reset missing CPUs

Commit 4881658a4b introduced a call to arm_get_cpu_by_id(),
and Coverity noticed that we weren't checking that it didn't
return NULL (CID 1371652).

Normally this won't happen (because all 4 CPUs are expected
to exist), but it's possible the user requested fewer CPUs
on the command line. Handle this possibility by silently
doing nothing, which is the same behaviour as before commit
4881658a4b and also how we handle the other CPU operations
(since we ignore the INVALID_PARAM returns from arm_set_cpu_on()
and friends).

There is a slight behavioural difference to the pre-4881658a4b
situation: the "reset this core" bit will remain set rather
than not being permitted to be set. The imx6 datasheet is
unclear about the behaviour in this odd corner case, so we
opt for the simpler code rather than complicated logic to
maintain identical behaviour.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1488542374-1256-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
3 years agoui/cocoa.m: add toast file support
Programmingkid [Fri, 30 Dec 2016 20:42:21 +0000 (15:42 -0500)] 
ui/cocoa.m: add toast file support

Add the ability for the user to use .toast files with QEMU. This format works
just like ISO files.

Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 0C9DA454-E3DC-4291-806E-9A96557DE833@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoMerge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170314' into...
Peter Maydell [Tue, 14 Mar 2017 14:11:38 +0000 (14:11 +0000)] 
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170314' into staging

target-arm queue:
 * arm-powerctl: Fix psci info return values
 * implement armv8 PMUSERENR (user-mode enable bits)

# gpg: Signature made Tue 14 Mar 2017 11:31:11 GMT
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20170314:
  target/arm/arm-powerctl: Fix psci info return values
  target/arm: implement armv8 PMUSERENR (user-mode enable bits)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agonbd/client: fix drop_sync [CVE-2017-2630]
Vladimir Sementsov-Ogievskiy [Tue, 7 Mar 2017 15:16:27 +0000 (09:16 -0600)] 
nbd/client: fix drop_sync [CVE-2017-2630]

Comparison symbol is misused. It may lead to memory corruption.
Introduced in commit 7d3123e.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170203154757.36140-6-vsementsov@virtuozzo.com>
[eblake: add CVE details, update conditional]
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170307151627.27212-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agomemory: info mtree check mr range overflow
Peter Xu [Tue, 14 Mar 2017 12:56:27 +0000 (20:56 +0800)] 
memory: info mtree check mr range overflow

The address of memory regions might overflow when something wrong
happened, like reported in:

https://lists.gnu.org/archive/html/qemu-devel/2017-03/msg02043.html

For easier debugging, let's try to detect it.

Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1489496187-624-1-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoicount: process QEMU_CLOCK_VIRTUAL timers in vCPU thread
Paolo Bonzini [Thu, 2 Mar 2017 18:56:40 +0000 (19:56 +0100)] 
icount: process QEMU_CLOCK_VIRTUAL timers in vCPU thread

icount has become much slower after tcg_cpu_exec has stopped
using the BQL.  There is also a latent bug that is masked by
the slowness.

The slowness happens because every occurrence of a QEMU_CLOCK_VIRTUAL
timer now has to wake up the I/O thread and wait for it.  The rendez-vous
is mediated by the BQL QemuMutex:

- handle_icount_deadline wakes up the I/O thread with BQL taken
- the I/O thread wakes up and waits on the BQL
- the VCPU thread releases the BQL a little later
- the I/O thread raises an interrupt, which calls qemu_cpu_kick
- the VCPU thread notices the interrupt, takes the BQL to
  process it and waits on it

All this back and forth is extremely expensive, causing a 6 to 8-fold
slowdown when icount is turned on.

One may think that the issue is that the VCPU thread is too dependent
on the BQL, but then the latent bug comes in.  I first tried removing
the BQL completely from the x86 cpu_exec, only to see everything break.
The only way to fix it (and make everything slow again) was to add a dummy
BQL lock/unlock pair.

This is because in -icount mode you really have to process the events
before the CPU restarts executing the next instruction.  Therefore, this
series moves the processing of QEMU_CLOCK_VIRTUAL timers straight in
the vCPU thread when running in icount mode.

The required changes include:

- make the timer notification callback wake up TCG's single vCPU thread
  when run from another thread.  By using async_run_on_cpu, the callback
  can override all_cpu_threads_idle() when the CPU is halted.

- move handle_icount_deadline after qemu_tcg_wait_io_event, so that
  the timer notification callback is invoked after the dummy work item
  wakes up the vCPU thread

- make handle_icount_deadline run the timers instead of just waking the
  I/O thread.

- stop processing the timers in the main loop

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agomain-loop: remove now unnecessary optimization
Paolo Bonzini [Fri, 3 Mar 2017 10:51:07 +0000 (11:51 +0100)] 
main-loop: remove now unnecessary optimization

This optimization is not necessary anymore, because the vCPU now drops
the I/O thread lock even with TCG.  Drop it to simplify the code and
avoid the "I/O thread spun for 1000 iterations" warning.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agocpus: define QEMUTimerListNotifyCB for QEMU system emulation
Paolo Bonzini [Fri, 3 Mar 2017 10:50:29 +0000 (11:50 +0100)] 
cpus: define QEMUTimerListNotifyCB for QEMU system emulation

There is no change for now, because the callback just invokes
qemu_notify_event.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoqemu-timer: do not include sysemu/cpus.h from util/qemu-timer.h
Paolo Bonzini [Fri, 3 Mar 2017 11:01:16 +0000 (12:01 +0100)] 
qemu-timer: do not include sysemu/cpus.h from util/qemu-timer.h

This dependency is the wrong way, and we will need util/qemu-timer.h from
sysemu/cpus.h in the next patch.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoqemu-timer: fix off-by-one
Paolo Bonzini [Fri, 3 Mar 2017 10:37:57 +0000 (11:37 +0100)] 
qemu-timer: fix off-by-one

If the first timer is exactly at the current value of the clock, the
deadline is met and the timer should fire.  This fixes itself on the next
iteration of the loop without icount; with icount, however, execution
of instructions will stop exactly at the deadline and won't proceed.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agotarget/nios2: take BQL around interrupt check
Paolo Bonzini [Wed, 1 Mar 2017 10:28:04 +0000 (11:28 +0100)] 
target/nios2: take BQL around interrupt check

The interrupt controller does not have its own locking.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoscsi: mptsas: fix the wrong reading size in fetch request
Li Qiang [Tue, 14 Mar 2017 10:56:20 +0000 (03:56 -0700)] 
scsi: mptsas: fix the wrong reading size in fetch request

When fetching request, it should read sizeof(*hdr), not the
pointer hdr.

Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-Id: <1489488980-130668-1-git-send-email-liqiang6-s@360.cn>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoutil: Removed unneeded header from path.c
Suramya Shah [Fri, 10 Mar 2017 16:39:48 +0000 (22:09 +0530)] 
util: Removed unneeded header from path.c

Signed-off-by: Suramya Shah <shah.suramya@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170310163948.7567-1-shah.suramya@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoconfigure: add the missing help output for optional features
Lin Ma [Fri, 10 Mar 2017 10:14:05 +0000 (18:14 +0800)] 
configure: add the missing help output for optional features

Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <20170310101405.26974-1-lma@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoscripts/dump-guest-memory.py: fix int128_get64 on recent gcc
Marc-André Lureau [Fri, 10 Mar 2017 11:28:19 +0000 (15:28 +0400)] 
scripts/dump-guest-memory.py: fix int128_get64 on recent gcc

The Int128 is no longer a struct, reaching a python exception:
Python Exception <class 'gdb.error'> Attempt to extract a component of a value that is not a (null).:

Replace struct access with a cast to uint64[] instead.

Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1427466

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170310112819.16760-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agokvmclock: Don't crash QEMU if KVM is disabled
Eduardo Habkost [Thu, 9 Mar 2017 18:50:46 +0000 (15:50 -0300)] 
kvmclock: Don't crash QEMU if KVM is disabled

Most machines don't allow sysbus devices like "kvmclock" to be
created from the command-line, but some of them do (the ones with
has_dynamic_sysbus=true). In those cases, it's possible to
manually create a kvmclock device without KVM being enabled,
making QEMU crash:

  $ qemu-system-x86_64 -machine q35,accel=tcg -device kvmclock
  Segmentation fault (core dumped)

This changes kvmclock's realize method to return an error if KVM
is disabled, to ensure it won't crash QEMU.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170309185046.17555-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agokvm: Print MSR information if KVM_{GET,SET}_MSRS failed
Eduardo Habkost [Thu, 9 Mar 2017 19:46:34 +0000 (16:46 -0300)] 
kvm: Print MSR information if KVM_{GET,SET}_MSRS failed

When a KVM_{GET,SET}_MSRS ioctl() fails, it is difficult to find
out which MSR caused the problem. Print an error message for
debugging, before we trigger the (ret == cpu->kvm_msr_buf->nmsrs)
assert.

Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170309194634.28457-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoexec: add cpu_synchronize_state to cpu_memory_rw_debug
Christian Borntraeger [Tue, 7 Mar 2017 14:19:08 +0000 (15:19 +0100)] 
exec: add cpu_synchronize_state to cpu_memory_rw_debug

I sometimes got "Cannot access memory" when using the x command
on the monitor. Turns out that the cpu env did contain stale data
(e.g. wrong control register content for page table origin).
We must synchronize the state of the CPU before walking the page
tables. A similar issues happens for a remote gdb, so lets
do the cpu_synchronize_state in cpu_memory_rw_debug.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1488896348-13560-1-git-send-email-borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agomem-prealloc: reduce large guest start-up and migration time.
Jitendra Kolhe [Fri, 24 Feb 2017 03:31:43 +0000 (09:01 +0530)] 
mem-prealloc: reduce large guest start-up and migration time.

Using "-mem-prealloc" option for a large guest leads to higher guest
start-up and migration time. This is because with "-mem-prealloc" option
qemu tries to map every guest page (create address translations), and
make sure the pages are available during runtime. virsh/libvirt by
default, seems to use "-mem-prealloc" option in case the guest is
configured to use huge pages. The patch tries to map all guest pages
simultaneously by spawning multiple threads. Currently limiting the
change to QEMU library functions on POSIX compliant host only, as we are
not sure if the problem exists on win32. Below are some stats with
"-mem-prealloc" option for guest configured to use huge pages.

------------------------------------------------------------------------
Idle Guest      | Start-up time | Migration time
------------------------------------------------------------------------
Guest stats with 2M HugePage usage - single threaded (existing code)
------------------------------------------------------------------------
64 Core - 4TB   | 54m11.796s    | 75m43.843s
64 Core - 1TB   | 8m56.576s     | 14m29.049s
64 Core - 256GB | 2m11.245s     | 3m26.598s
------------------------------------------------------------------------
Guest stats with 2M HugePage usage - map guest pages using 8 threads
------------------------------------------------------------------------
64 Core - 4TB   | 5m1.027s      | 34m10.565s
64 Core - 1TB   | 1m10.366s     | 8m28.188s
64 Core - 256GB | 0m19.040s     | 2m10.148s
-----------------------------------------------------------------------
Guest stats with 2M HugePage usage - map guest pages using 16 threads
-----------------------------------------------------------------------
64 Core - 4TB   | 1m58.970s     | 31m43.400s
64 Core - 1TB   | 0m39.885s     | 7m55.289s
64 Core - 256GB | 0m11.960s     | 2m0.135s
-----------------------------------------------------------------------

Changed in v2:
 - modify number of memset threads spawned to min(smp_cpus, 16).
 - removed 64GB memory restriction for spawning memset threads.

Changed in v3:
 - limit number of threads spawned based on
   min(sysconf(_SC_NPROCESSORS_ONLN), 16, smp_cpus)
 - implement memset thread specific siglongjmp in SIGBUS signal_handler.

Changed in v4
 - remove sigsetjmp/siglongjmp and SIGBUS unblock/block for main thread
   as main thread no longer touches any pages.
 - simplify code my returning memset_thread_failed status from
   touch_all_pages.

Signed-off-by: Jitendra Kolhe <jitendra.kolhe@hpe.com>
Message-Id: <1487907103-32350-1-git-send-email-jitendra.kolhe@hpe.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agodocs: Add a note about mixing bootindex with "-boot order"
Thomas Huth [Tue, 28 Feb 2017 17:40:01 +0000 (18:40 +0100)] 
docs: Add a note about mixing bootindex with "-boot order"

Occasionally the users try to mix the bootindex properties with the
"-boot order" parameter - and this likely does not give the expected
results. So let's add a proper statement that these two concepts
should not be used together.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1488303601-23741-1-git-send-email-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agomemory_region: Fix name comments
Dr. David Alan Gilbert [Thu, 9 Mar 2017 15:27:08 +0000 (15:27 +0000)] 
memory_region: Fix name comments

The 'name' parameter to memory_region_init_* had been marked as debug
only, however vmstate_region_ram uses it as a parameter to
qemu_ram_set_idstr to set RAMBlock names and these form part of the
migration stream.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170309152708.30635-1-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agotarget/arm/arm-powerctl: Fix psci info return values
Andrew Jones [Tue, 14 Mar 2017 11:28:54 +0000 (11:28 +0000)] 
target/arm/arm-powerctl: Fix psci info return values

The power state spec section 5.1.5 AFFINITY_INFO defines the
affinity info return values as

  0 ON
  1 OFF
  2 ON_PENDING

I grepped QEMU for power_state to ensure that no assumptions
of OFF=0 were being made.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20170303123232.4967-1-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agotarget/arm: implement armv8 PMUSERENR (user-mode enable bits)
Andrew Baumann [Tue, 14 Mar 2017 11:28:54 +0000 (11:28 +0000)] 
target/arm: implement armv8 PMUSERENR (user-mode enable bits)

In armv8, this register implements more than a single bit, with
fine-grained enables for read access to event counters, cycles
counters, and write access to the software increment. This change
implements those checks using custom access functions for the relevant
registers.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 20170228215801.10472-2-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: move a couple of access functions to be only compiled
 ifndef CONFIG_USER_ONLY to avoid compiler warnings]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoMerge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
Peter Maydell [Tue, 14 Mar 2017 11:15:00 +0000 (11:15 +0000)] 
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Tue 14 Mar 2017 07:55:01 GMT
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  hw/net: implement MIB counters in mcf_fec driver
  COLO-compare: Fix trace_event print bug
  e1000e: correctly tear down MSI-X memory regions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoMerge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170314' into staging
Peter Maydell [Tue, 14 Mar 2017 10:13:19 +0000 (10:13 +0000)] 
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170314' into staging

ppc patch queue for 2017-03-14

This set has a handful og bugfixes to go into qemu-2.9.  This includes
an update to the dtc/libfdt submodule which will fix the build errors
seen on some distributions.

# gpg: Signature made Tue 14 Mar 2017 04:00:41 GMT
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.9-20170314:
  dtc: Update submodule to avoid build errors
  pseries: Don't expose PCIe extended config space on older machine types
  target/ppc: fix cpu_ov setting for 32-bit
  target/ppc: Fix wrong number of UAMR register

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agobuild: include sys/sysmacros.h for major() and minor()
Christopher Covington [Wed, 28 Dec 2016 20:04:33 +0000 (15:04 -0500)] 
build: include sys/sysmacros.h for major() and minor()

The definition of the major() and minor() macros are moving within glibc to
<sys/sysmacros.h>. Include this header when it is available to avoid the
following sorts of build-stopping messages:

qga/commands-posix.c: In function ‘dev_major_minor’:
qga/commands-posix.c:656:13: error: In the GNU C Library, "major" is defined
 by <sys/sysmacros.h>. For historical compatibility, it is
 currently defined by <sys/types.h> as well, but we plan to
 remove this soon. To use "major", include <sys/sysmacros.h>
 directly. If you did not intend to use a system-defined macro
 "major", you should undefine it after including <sys/types.h>. [-Werror]
         *devmajor = major(st.st_rdev);
             ^~~~~~~~~~~~~~~~~~~~~~~~~~

qga/commands-posix.c:657:13: error: In the GNU C Library, "minor" is defined
 by <sys/sysmacros.h>. For historical compatibility, it is
 currently defined by <sys/types.h> as well, but we plan to
 remove this soon. To use "minor", include <sys/sysmacros.h>
 directly. If you did not intend to use a system-defined macro
 "minor", you should undefine it after including <sys/types.h>. [-Werror]
         *devminor = minor(st.st_rdev);
             ^~~~~~~~~~~~~~~~~~~~~~~~~~

The additional include allows the build to complete on Fedora 26 (Rawhide)
with glibc version 2.24.90.

Signed-off-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agohw/net: implement MIB counters in mcf_fec driver
Greg Ungerer [Mon, 13 Mar 2017 04:56:57 +0000 (14:56 +1000)] 
hw/net: implement MIB counters in mcf_fec driver

The FEC ethernet hardware module used on ColdFire SoC parts contains a
block of RAM used to maintain hardware counters. This block is accessible
via the usual FEC register address space. There is currently no support
for this in the QEMU mcf_fec driver.

Add support for storing a MIB RAM block, and provide register level
access to it. Also implement a basic set of stats collection functions
to populate MIB data fields.

This support tested running a Linux target and using the net-tools
"ethtool -S" option. As of linux-4.9 the kernels FEC driver makes
accesses to the MIB counters during its initialization (which it never
did before), and so this version of Linux will now fail with the QEMU
error:

    qemu: hardware error: mcf_fec_read: Bad address 0x200

This MIB counter support fixes this problem.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
3 years agoCOLO-compare: Fix trace_event print bug
Zhang Chen [Thu, 9 Mar 2017 07:40:07 +0000 (15:40 +0800)] 
COLO-compare: Fix trace_event print bug

Because of inet_ntoa() return a statically allocated buffer,
subsequent calls will overwrite, So we fix this bug.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
3 years agoe1000e: correctly tear down MSI-X memory regions
Paolo Bonzini [Thu, 9 Mar 2017 11:58:30 +0000 (12:58 +0100)] 
e1000e: correctly tear down MSI-X memory regions

MSI-X has been disabled by the time the e1000e device is unrealized, hence
msix_uninit is never called.  This causes the object to be leaked, which
shows up as a RAMBlock with empty name when attempting migration.

Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
3 years agodtc: Update submodule to avoid build errors
David Gibson [Tue, 14 Mar 2017 01:24:29 +0000 (12:24 +1100)] 
dtc: Update submodule to avoid build errors

The currently included version of the dtc/libfdt submodule has some build
errors on certain distributions (including RHEL7).  This is due to some
poorly named macros in libfdt.h; they're designed for use with the sparse
static checker, but use reserved names which conflict with some symbols in
the standard headers.

That's been corrected in upstream dtc, this updates the qemu submodule to
bring the fix to qemu.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agopseries: Don't expose PCIe extended config space on older machine types
David Gibson [Tue, 14 Mar 2017 00:54:17 +0000 (11:54 +1100)] 
pseries: Don't expose PCIe extended config space on older machine types

bb9986452 "spapr_pci: Advertise access to PCIe extended config space"
allowed guests to access the extended config space of PCI Express devices
via the PAPR interfaces, even though the paravirtualized bus mostly acts
like plain PCI.

However, that patch enabled access unconditionally, including for existing
machine types, which is an unwise change in behaviour.  This patch limits
the change to pseries-2.9 (and later) machine types.

Suggested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agotarget/ppc: fix cpu_ov setting for 32-bit
Nikunj A Dadhania [Mon, 13 Mar 2017 09:31:04 +0000 (15:01 +0530)] 
target/ppc: fix cpu_ov setting for 32-bit

A bug was introduced in following commit:

    dc0ad84 target/ppc: update overflow flags for add/sub

As for 32-bit ppc target extracting bit 63 for overflow is not correct.
Made it dependent on TARGET_LOG_BITS. This had broken booting MacOS
9.2.1 image

Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
3 years agotarget/ppc: Fix wrong number of UAMR register
Thomas Huth [Wed, 8 Mar 2017 19:58:43 +0000 (20:58 +0100)] 
target/ppc: Fix wrong number of UAMR register

The SPR UAMR has the number 13, and not 12. (Fortunately it seems like
Linux is not using this register yet - only the privileged version with
number 29 ... that's why nobody noticed this problem yet)

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agoMerge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Peter Maydell [Mon, 13 Mar 2017 15:08:01 +0000 (15:08 +0000)] 
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer fixes for 2.9.0-rc1

# gpg: Signature made Mon 13 Mar 2017 11:53:16 GMT
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  commit: Implement .bdrv_refresh_filename
  mirror: Implement .bdrv_refresh_filename
  block: Refresh filename after changing backing file
  commit: Implement bdrv_commit_top.bdrv_co_get_block_status
  block: Request block status from *file for BDRV_BLOCK_RAW
  block: Remove check_new_perm from bdrv_replace_child()
  migration: Document handling of bdrv_is_allocated() errors
  vvfat: React to bdrv_is_allocated() errors
  backup: React to bdrv_is_allocated() errors
  block: Drop unmaintained 'archipelago' driver
  file-posix: Consider max_segments for BlockLimits.max_transfer
  backup: allow target without .bdrv_get_info

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoMerge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
Peter Maydell [Mon, 13 Mar 2017 13:16:35 +0000 (13:16 +0000)] 
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging

x86: Haswell TSX blacklist fix for 2.9

# gpg: Signature made Fri 10 Mar 2017 18:45:08 GMT
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-pull-request:
  i386: Change stepping of Haswell to non-blacklisted value
  i386/kvm: Blacklist TSX on known broken hosts
  i386: host_vendor_fms() helper function

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agocommit: Implement .bdrv_refresh_filename
Kevin Wolf [Thu, 9 Mar 2017 10:49:16 +0000 (11:49 +0100)] 
commit: Implement .bdrv_refresh_filename

We want query-block to return the right filename, even if a commit job
put a bdrv_commit_top on top of the actual image format driver. Let
bdrv_commit_top.bdrv_refresh_filename get the filename from its backing
file.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
3 years agomirror: Implement .bdrv_refresh_filename
Kevin Wolf [Thu, 9 Mar 2017 10:49:16 +0000 (11:49 +0100)] 
mirror: Implement .bdrv_refresh_filename

We want query-block to return the right filename, even if a mirror job
put a bdrv_mirror_top on top of the actual image format driver. Let
bdrv_mirror_top.bdrv_refresh_filename get the filename from its backing
file.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
3 years agoblock: Refresh filename after changing backing file
Kevin Wolf [Thu, 9 Mar 2017 10:45:39 +0000 (11:45 +0100)] 
block: Refresh filename after changing backing file

In bdrv_open_inherit(), the filename is refreshed after opening the
backing file, but we neglected to do the same when the backing file
changes later.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
3 years agocommit: Implement bdrv_commit_top.bdrv_co_get_block_status
Kevin Wolf [Wed, 8 Mar 2017 14:07:12 +0000 (15:07 +0100)] 
commit: Implement bdrv_commit_top.bdrv_co_get_block_status

In some cases, bdrv_co_get_block_status() is called recursively for the
whole backing chain. The automatically inserted bdrv_commit_top filter
driver must not stop the recursion, so implement a callback that simply
forwards the request to bs->backing.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
3 years agoblock: Request block status from *file for BDRV_BLOCK_RAW
Kevin Wolf [Wed, 8 Mar 2017 14:02:49 +0000 (15:02 +0100)] 
block: Request block status from *file for BDRV_BLOCK_RAW

This fixes bdrv_co_get_block_status() for the bdrv_mirror_top block
driver, which must fall through to bs->backing instead of bs->file.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
3 years agoblock: Remove check_new_perm from bdrv_replace_child()
Kevin Wolf [Wed, 8 Mar 2017 13:44:07 +0000 (14:44 +0100)] 
block: Remove check_new_perm from bdrv_replace_child()

All callers pass false now, so the parameter can go away again.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
3 years agomigration: Document handling of bdrv_is_allocated() errors
Eric Blake [Wed, 8 Mar 2017 21:34:29 +0000 (15:34 -0600)] 
migration: Document handling of bdrv_is_allocated() errors

Migration is the only code left in the tree that does not react
to bdrv_is_allocated() failures.  But as there is no useful way
to react to the failure, and we are merely skipping unallocated
sectors on success, just document that our choice of handling
is intended.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
3 years agovvfat: React to bdrv_is_allocated() errors
Eric Blake [Wed, 8 Mar 2017 21:34:28 +0000 (15:34 -0600)] 
vvfat: React to bdrv_is_allocated() errors

If bdrv_is_allocated() fails, we should react to that failure.
For 2 of the 3 callers, reporting the error was easy.  But in
cluster_was_modified() and its lone caller
get_cluster_count_for_direntry(), it's rather invasive to update
the logic to pass the error back; so there, I went with merely
documenting the issue by changing the return type to bool (in
all likelihood, treating the cluster as modified will then
trigger a read which will also fail, and eventually get to an
error - but given the appalling number of abort() calls in this
code, I'm not making it any worse).

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
3 years agobackup: React to bdrv_is_allocated() errors
Eric Blake [Wed, 8 Mar 2017 21:34:27 +0000 (15:34 -0600)] 
backup: React to bdrv_is_allocated() errors

If bdrv_is_allocated() fails, we should immediately do the backup
error action, rather than attempting backup_do_cow() (although
that will likely fail too).

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
3 years agoblock: Drop unmaintained 'archipelago' driver
Eric Blake [Wed, 8 Mar 2017 20:02:16 +0000 (14:02 -0600)] 
block: Drop unmaintained 'archipelago' driver

The driver has failed to build since commit da34e65, in qemu 2.6,
due to a missing include of qapi/error.h for error_setg().
Since no one has complained in three releases, it is easier to
remove the dead code than to keep it around, especially since it
is not being built by default and therefore prone to bitrot.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
3 years agofile-posix: Consider max_segments for BlockLimits.max_transfer
Fam Zheng [Wed, 8 Mar 2017 12:08:14 +0000 (20:08 +0800)] 
file-posix: Consider max_segments for BlockLimits.max_transfer

BlockLimits.max_transfer can be too high without this fix, guest will
encounter I/O error or even get paused with werror=stop or rerror=stop. The
cause is explained below.

Linux has a separate limit, /sys/block/.../queue/max_segments, which in
the worst case can be more restrictive than the BLKSECTGET which we
already consider (note that they are two different things). So, the
failure scenario before this patch is:

1) host device has max_sectors_kb = 4096 and max_segments = 64;
2) guest learns max_sectors_kb limit from QEMU, but doesn't know
   max_segments;
3) guest issues e.g. a 512KB request thinking it's okay, but actually
   it's not, because it will be passed through to host device as an
   SG_IO req that has niov > 64;
4) host kernel doesn't like the segmenting of the request, and returns
   -EINVAL;

This patch checks the max_segments sysfs entry for the host device and
calculates a "conservative" bytes limit using the page size, which is
then merged into the existing max_transfer limit. Guest will discover
this from the usual virtual block device interfaces. (In the case of
scsi-generic, it will be done in the INQUIRY reply interception in
device model.)

The other possibility is to actually propagate it as a separate limit,
but it's not better. On the one hand, there is a big complication: the
limit is per-LUN in QEMU PoV (because we can attach LUNs from different
host HBAs to the same virtio-scsi bus), but the channel to communicate
it in a per-LUN manner is missing down the stack; on the other hand,
two limits versus one doesn't change much about the valid size of I/O
(because guest has no control over host segmenting).

Also, the idea to fall back to bounce buffering in QEMU, upon -EINVAL,
was explored. Unfortunately there is no neat way to ensure the bounce
buffer is less segmented (in terms of DMA addr) than the guest buffer.

Practically, this bug is not very common. It is only reported on a
Emulex (lpfc), so it's okay to get it fixed in the easier way.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
3 years agobackup: allow target without .bdrv_get_info
Vladimir Sementsov-Ogievskiy [Tue, 28 Feb 2017 19:33:40 +0000 (22:33 +0300)] 
backup: allow target without .bdrv_get_info

Currently backup to nbd target is broken, as nbd doesn't have
.bdrv_get_info realization.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
3 years agoMerge remote-tracking branch 'remotes/famz/tags/docker-pull-request' into staging
Peter Maydell [Mon, 13 Mar 2017 11:26:36 +0000 (11:26 +0000)] 
Merge remote-tracking branch 'remotes/famz/tags/docker-pull-request' into staging

# gpg: Signature made Fri 10 Mar 2017 07:15:38 GMT
# gpg:                using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/docker-pull-request:
  docker/dockerfiles/debian-s390-cross: include clang
  tests/docker: support proxy / corporate firewall

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoi386: Change stepping of Haswell to non-blacklisted value
Eduardo Habkost [Thu, 9 Mar 2017 18:12:12 +0000 (15:12 -0300)] 
i386: Change stepping of Haswell to non-blacklisted value

glibc blacklists TSX on Haswell CPUs with model==60 and
stepping < 4. To make the Haswell CPU model more useful, make
those guests actually use TSX by changing CPU stepping to 4.

References:
* glibc commit 2702856bf45c82cf8e69f2064f5aa15c0ceb6359
  https://sourceware.org/git/?p=glibc.git;a=commit;h=2702856bf45c82cf8e69f2064f5aa15c0ceb6359

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170309181212.18864-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
3 years agoi386/kvm: Blacklist TSX on known broken hosts
Eduardo Habkost [Thu, 9 Mar 2017 18:12:11 +0000 (15:12 -0300)] 
i386/kvm: Blacklist TSX on known broken hosts

Some Intel CPUs are known to have a broken TSX implementation. A
microcode update from Intel disabled TSX on those CPUs, but
GET_SUPPORTED_CPUID might be reporting it as supported if the
hosts were not updated yet.

Manually fixup the GET_SUPPORTED_CPUID data to ensure we will
never enable TSX when running on those hosts.

Reference:
* glibc commit 2702856bf45c82cf8e69f2064f5aa15c0ceb6359:
  https://sourceware.org/git/?p=glibc.git;a=commit;h=2702856bf45c82cf8e69f2064f5aa15c0ceb6359

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170309181212.18864-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
3 years agoi386: host_vendor_fms() helper function
Eduardo Habkost [Thu, 9 Mar 2017 18:12:10 +0000 (15:12 -0300)] 
i386: host_vendor_fms() helper function

Helper function for code that needs to check the host CPU
vendor/family/model/stepping values.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170309181212.18864-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
3 years agodocker/dockerfiles/debian-s390-cross: include clang
Alex Bennée [Mon, 6 Mar 2017 11:28:48 +0000 (11:28 +0000)] 
docker/dockerfiles/debian-s390-cross: include clang

It's a silly little limitation on Shippable that is looks for clang
in the container even though we won't use it. The arm/aarch64 cross
builds inherit this from debian.docker but as we needed to use
debian-testing for this we add it here. We also collapse the update
step into one RUN line to remove and intermediate layer of the docker
build.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20170306112848.659-1-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
3 years agoMerge remote-tracking branch 'remotes/stsquad/tags/pull-mttcg-fixups-090317-1' into...
Peter Maydell [Thu, 9 Mar 2017 18:53:55 +0000 (18:53 +0000)] 
Merge remote-tracking branch 'remotes/stsquad/tags/pull-mttcg-fixups-090317-1' into staging

Fix-ups for MTTCG regressions for 2.9

This is the same as v3 posted a few days ago except with a few extra
Reviewed-by tags added.

# gpg: Signature made Thu 09 Mar 2017 10:45:18 GMT
# gpg:                using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-mttcg-fixups-090317-1:
  hw/intc/arm_gic: modernise the DPRINTF
  target/arm/helper: make it clear the EC field is also in hex
  target-i386: defer VMEXIT to do_interrupt
  target/mips: hold BQL for timer interrupts
  translate-all: exit cpu_restore_state early if translating
  target/xtensa: hold BQL for interrupt processing
  s390x/misc_helper.c: wrap IO instructions in BQL
  sparc/sparc64: grab BQL before calling cpu_check_irqs
  cpus.c: add additional error_report when !TARGET_SUPPORT_MTTCG
  target/i386/cpu.h: declare TCG_GUEST_DEFAULT_MO
  vl/cpus: be smarter with icount and MTTCG

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoMerge remote-tracking branch 'remotes/kraxel/tags/pull-fixes-20170309-1' into staging
Peter Maydell [Thu, 9 Mar 2017 13:16:05 +0000 (13:16 +0000)] 
Merge remote-tracking branch 'remotes/kraxel/tags/pull-fixes-20170309-1' into staging

2.9 bugfixes for ohci and qxl

# gpg: Signature made Thu 09 Mar 2017 09:09:44 GMT
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-fixes-20170309-1:
  qxl: clear guest_cursor on QXL_CURSOR_HIDE
  ohci: relax link check

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agohw/intc/arm_gic: modernise the DPRINTF
Alex Bennée [Thu, 2 Mar 2017 19:08:52 +0000 (19:08 +0000)] 
hw/intc/arm_gic: modernise the DPRINTF

While I was debugging the icount issues I realised a bunch of the
messages look quite similar. I've fixed this by including __func__ in
the debug print. At the same time I move the a modern if (GATE) style
printf which ensures the compiler can check for format string errors
even if the code gets optimised away in the non-DEBUG_GIC case.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
3 years agotarget/arm/helper: make it clear the EC field is also in hex
Alex Bennée [Thu, 2 Mar 2017 14:07:16 +0000 (14:07 +0000)] 
target/arm/helper: make it clear the EC field is also in hex

..just like the rest of the displayed ESR register. Otherwise people
might scratch their heads if a not obviously hex number is displayed
for the EC field.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
3 years agotarget-i386: defer VMEXIT to do_interrupt
Paolo Bonzini [Tue, 7 Mar 2017 11:37:36 +0000 (12:37 +0100)] 
target-i386: defer VMEXIT to do_interrupt

Paths through the softmmu code during code generation now need to be audited
to check for double locking of tb_lock.  In particular, VMEXIT can take tb_lock
through cpu_vmexit -> cpu_x86_update_cr4 -> tlb_flush.

To avoid this, split VMEXIT delivery in two parts, similar to what is done with
exceptions.  cpu_vmexit only records the VMEXIT exit code and information, and
cc->do_interrupt can then deliver it when it is safe to take the lock.

Reported-by: Alexander Boettcher <alexander.boettcher@genode-labs.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Tested-by: Alexander Boettcher <alexander.boettcher@genode-labs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
3 years agotarget/mips: hold BQL for timer interrupts
Yongbok Kim [Fri, 3 Mar 2017 11:20:21 +0000 (11:20 +0000)] 
target/mips: hold BQL for timer interrupts

Hold BQL when accessing timer which can cause interrupts

Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
3 years agotranslate-all: exit cpu_restore_state early if translating
Alex Bennée [Thu, 2 Mar 2017 10:31:32 +0000 (10:31 +0000)] 
translate-all: exit cpu_restore_state early if translating

The translation code uses cpu_ld*_code which can trigger a tlb_fill
which if it fails will erroneously attempts a fault resolution. This
never works during translation as the TB being generated hasn't been
added yet. The target should have checked retaddr before calling
cpu_restore_state but for those that have yet to be fixed we do it
here to avoid a recursive tb_lock() under MTTCG's new locking regime.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
3 years agotarget/xtensa: hold BQL for interrupt processing
Alex Bennée [Wed, 1 Mar 2017 20:29:10 +0000 (20:29 +0000)] 
target/xtensa: hold BQL for interrupt processing

Make sure we have the BQL held when processing interrupts.

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
3 years agos390x/misc_helper.c: wrap IO instructions in BQL
Alex Bennée [Wed, 1 Mar 2017 16:22:40 +0000 (16:22 +0000)] 
s390x/misc_helper.c: wrap IO instructions in BQL

Helpers that can trigger IO events (including interrupts) need to be
protected by the BQL. I've updated all the helpers that call into an
ioinst_handle_* functions.

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
3 years agosparc/sparc64: grab BQL before calling cpu_check_irqs
Alex Bennée [Wed, 1 Mar 2017 13:20:02 +0000 (13:20 +0000)] 
sparc/sparc64: grab BQL before calling cpu_check_irqs

IRQ modification is part of device emulation and should be done while
the BQL is held to prevent races when MTTCG is enabled. This adds
assertions in the hw emulation layer and wraps the calls from helpers
in the BQL.

Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
3 years agocpus.c: add additional error_report when !TARGET_SUPPORT_MTTCG
Alex Bennée [Tue, 28 Feb 2017 14:40:17 +0000 (14:40 +0000)] 
cpus.c: add additional error_report when !TARGET_SUPPORT_MTTCG

While we may fail the memory ordering check later that can be
confusing. So in cases where TARGET_SUPPORT_MTTCG has yet to be
defined we should say so specifically.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
3 years agotarget/i386/cpu.h: declare TCG_GUEST_DEFAULT_MO
Alex Bennée [Tue, 28 Feb 2017 14:35:14 +0000 (14:35 +0000)] 
target/i386/cpu.h: declare TCG_GUEST_DEFAULT_MO

This suppresses the incorrect warning when forcing MTTCG for x86
guests on x86 hosts. A future patch will still warn when
TARGET_SUPPORT_MTTCG hasn't been defined for the guest (which is still
pending for x86).

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
3 years agovl/cpus: be smarter with icount and MTTCG
Alex Bennée [Mon, 27 Feb 2017 17:09:01 +0000 (17:09 +0000)] 
vl/cpus: be smarter with icount and MTTCG

The sense of the test was inverted. Make it simple, if icount is
enabled then we disabled MTTCG by default. If the user tries to force
MTTCG upon us then we tell them "no".

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
3 years agoqxl: clear guest_cursor on QXL_CURSOR_HIDE
Gerd Hoffmann [Mon, 6 Mar 2017 08:31:51 +0000 (09:31 +0100)] 
qxl: clear guest_cursor on QXL_CURSOR_HIDE

Make sure we don't leave guest_cursor pointing into nowhere.  This might
lead to (rare) live migration failures, due to target trying to restore
the cursor from the stale pointer.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1421788
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1488789111-27340-1-git-send-email-kraxel@redhat.com

3 years agoohci: relax link check
Gerd Hoffmann [Tue, 7 Mar 2017 08:40:18 +0000 (09:40 +0100)] 
ohci: relax link check

The strict td link limit added by commit "95ed569 usb: ohci: limit the
number of link eds" causes problems with macos guests.  Lets raise the
limit.

Reported-by: Programmingkid <programmingkidx@gmail.com>
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 1488876018-31576-1-git-send-email-kraxel@redhat.com

3 years agoMerge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Peter Maydell [Wed, 8 Mar 2017 09:47:52 +0000 (09:47 +0000)] 
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer fixes for 2.9.0-rc0

# gpg: Signature made Tue 07 Mar 2017 14:59:18 GMT
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (27 commits)
  commit: Don't use error_abort in commit_start
  block: Don't use error_abort in blk_new_open
  sheepdog: Support blockdev-add
  qapi-schema: Rename SocketAddressFlat's variant tcp to inet
  qapi-schema: Rename GlusterServer to SocketAddressFlat
  gluster: Plug memory leaks in qemu_gluster_parse_json()
  gluster: Don't duplicate qapi-util.c's qapi_enum_parse()
  gluster: Drop assumptions on SocketTransport names
  sheepdog: Implement bdrv_parse_filename()
  sheepdog: Use SocketAddress and socket_connect()
  sheepdog: Report errors in pseudo-filename more usefully
  sheepdog: Don't truncate long VDI name in _open(), _create()
  sheepdog: Fix snapshot ID parsing in _open(), _create, _goto()
  sheepdog: Mark sd_snapshot_delete() lossage FIXME
  sheepdog: Fix error handling sd_create()
  sheepdog: Fix error handling in sd_snapshot_delete()
  sheepdog: Defuse time bomb in sd_open() error handling
  block: Fix error handling in bdrv_replace_in_backing_chain()
  block: Handle permission errors in change_parent_backing_link()
  block: Ignore multiple children in bdrv_check_update_perm()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoMerge remote-tracking branch 'remotes/armbru/tags/pull-block-2017-02-28-v4' into...
Peter Maydell [Tue, 7 Mar 2017 17:06:48 +0000 (17:06 +0000)] 
Merge remote-tracking branch 'remotes/armbru/tags/pull-block-2017-02-28-v4' into staging

block: Command line option -blockdev

# gpg: Signature made Tue 07 Mar 2017 15:07:59 GMT
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-block-2017-02-28-v4: (24 commits)
  keyval: Support lists
  docs/qapi-code-gen.txt: Clarify naming rules
  qapi: Improve how keyval input visitor reports unexpected dicts
  block: Initial implementation of -blockdev
  qapi: New qobject_input_visitor_new_str() for convenience
  keyval: Restrict key components to valid QAPI names
  qapi: New parse_qapi_name()
  test-qapi-util: New, covering qapi/qapi-util.c
  monitor: Assert qmp_schema_json[] is sane
  test-visitor-serialization: Pass &error_abort to qobject_from_json()
  check-qjson: Test errors from qobject_from_json()
  block: More detailed syntax error reporting for JSON filenames
  qobject: Propagate parse errors through qobject_from_json()
  test-qobject-input-visitor: Abort earlier on bad test input
  qjson: Abort earlier on qobject_from_jsonf() misuse
  libqtest: Fix qmp() & friends to abort on JSON parse errors
  qobject: Propagate parse errors through qobject_from_jsonv()
  qapi: Factor out common qobject_input_get_keyval()
  qapi: Factor out common part of qobject input visitor creation
  test-keyval: Cover use with qobject input visitor
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agokeyval: Support lists
Markus Armbruster [Tue, 28 Feb 2017 21:27:10 +0000 (22:27 +0100)] 
keyval: Support lists

Additionally permit non-negative integers as key components.  A
dictionary's keys must either be all integers or none.  If all keys
are integers, convert the dictionary to a list.  The set of keys must
be [0,N].

Examples:

* list.1=goner,list.0=null,list.1=eins,list.2=zwei
  is equivalent to JSON [ "null", "eins", "zwei" ]

* a.b.c=1,a.b.0=2
  is inconsistent: a.b.c clashes with a.b.0

* list.0=null,list.2=eins,list.2=zwei
  has a hole: list.1 is missing

Similar design flaw as for objects: there is no way to denote an empty
list.  While interpreting "key absent" as empty list seems natural
(removing a list member from the input string works when there are
multiple ones, so why not when there's just one), it doesn't work:
"key absent" already means "optional list absent", which isn't the
same as "empty list present".

Update the keyval object visitor to use this a.0 syntax in error
messages rather than the usual a[0].

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488317230-26248-25-git-send-email-armbru@redhat.com>
[Off-by-one fix squashed in, as per Kevin's review]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
3 years agodocs/qapi-code-gen.txt: Clarify naming rules
Markus Armbruster [Tue, 28 Feb 2017 21:27:09 +0000 (22:27 +0100)] 
docs/qapi-code-gen.txt: Clarify naming rules

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-24-git-send-email-armbru@redhat.com>