qemu.git
4 years ago9pfs: handle walk of ".." in the root directory
Greg Kurz [Tue, 30 Aug 2016 15:02:27 +0000 (17:02 +0200)] 
9pfs: handle walk of ".." in the root directory

The 9P spec at http://man.cat-v.org/plan_9/5/intro says:

All directories must support walks to the directory .. (dot-dot) meaning
parent directory, although by convention directories contain no explicit
entry for .. or . (dot).  The parent of the root directory of a server's
tree is itself.

This means that a client cannot walk further than the root directory
exported by the server. In other words, if the client wants to walk
"/.." or "/foo/../..", the server should answer like the request was
to walk "/".

This patch just does that:
- we cache the QID of the root directory at attach time
- during the walk we compare the QID of each path component with the root
  QID to detect if we're in a "/.." situation
- if so, we skip the current component and go to the next one

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years ago9pfs: forbid . and .. in file names
Greg Kurz [Tue, 30 Aug 2016 17:13:11 +0000 (19:13 +0200)] 
9pfs: forbid . and .. in file names

According to the 9P spec http://man.cat-v.org/plan_9/5/open about the
create request:

The names . and .. are special; it is illegal to create files with these
names.

This patch causes the create and lcreate requests to fail with EINVAL if
the file name is either "." or "..".

Even if it isn't explicitly written in the spec, this patch extends the
checking to all requests that may cause a directory entry to be created:

    - mknod
    - rename
    - renameat
    - mkdir
    - link
    - symlink

The unlinkat request also gets patched for consistency (even if
rmdir("foo/..") is expected to fail according to POSIX.1-2001).

The various error values come from the linux manual pages.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years ago9pfs: forbid illegal path names
Greg Kurz [Tue, 30 Aug 2016 17:11:05 +0000 (19:11 +0200)] 
9pfs: forbid illegal path names

Empty path components don't make sense for most commands and may cause
undefined behavior, depending on the backend.

Also, the walk request described in the 9P spec [1] clearly shows that
the client is supposed to send individual path components: the official
linux client never sends portions of path containing the / character for
example.

Moreover, the 9P spec [2] also states that a system can decide to restrict
the set of supported characters used in path components, with an explicit
mention "to remove slashes from name components".

This patch introduces a new name_is_illegal() helper that checks the
names sent by the client are not empty and don't contain unwanted chars.
Since 9pfs is only supported on linux hosts, only the / character is
checked at the moment. When support for other hosts (AKA. win32) is added,
other chars may need to be blacklisted as well.

If a client sends an illegal path component, the request will fail and
ENOENT is returned to the client.

[1] http://man.cat-v.org/plan_9/5/walk
[2] http://man.cat-v.org/plan_9/5/intro

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoMerge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Peter Maydell [Tue, 30 Aug 2016 16:11:14 +0000 (17:11 +0100)] 
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* pc-bios/optionrom/Makefile fix for -O0
* revert socket_connect change

# gpg: Signature made Tue 30 Aug 2016 15:36:59 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  optionrom: cope with multiple -O options
  Revert "Change net/socket.c to use socket_*() functions"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agooptionrom: cope with multiple -O options
Paolo Bonzini [Tue, 30 Aug 2016 12:30:11 +0000 (14:30 +0200)] 
optionrom: cope with multiple -O options

Reproducer:

    CFLAGS="-g3 -O0" ./configure --target-list=aarch64-softmmu,arm-softmmu --enable-vhost-net --enable-virtfs

Here CFLAGS ends up with "-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 ... -g3 -O0"
and pc-bios/optionrom/Makefile forgets to add the -O2 it needs.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoRevert "Change net/socket.c to use socket_*() functions"
Paolo Bonzini [Tue, 30 Aug 2016 12:04:12 +0000 (14:04 +0200)] 
Revert "Change net/socket.c to use socket_*() functions"

Since commit 7e8449594c929, the socket connect code is blocking, because
calling socket_connect() without callback is blocking.  This reverts the
commit.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agotranslate: early exit in tb_flush if there is no tcg
Christian Borntraeger [Thu, 25 Aug 2016 18:11:26 +0000 (20:11 +0200)] 
translate: early exit in tb_flush if there is no tcg

tb_flush does all kind of things, which are very tcg specific. As it
is called from some places even for KVM (e.g. gdb server) it is better
to detect these cases and do an early exit.
This also fixes a crash in the gdb server that was triggered by
commit 909eaac9bbc2 ("tb hash: track translated blocks with qht").

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Richard Henderson <rth@twiddle.net>
Reported-by: Brent Baccala <cosine@freesoft.org>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1472148686-39841-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoui: fix refresh of VNC server surface
Daniel P. Berrange [Tue, 16 Aug 2016 16:30:32 +0000 (17:30 +0100)] 
ui: fix refresh of VNC server surface

In previous commit

  commit c7628bff4138ce906a3620d12e0820c1cf6c140d
  Author: Gerd Hoffmann <kraxel@redhat.com>
  Date:   Fri Oct 30 12:10:09 2015 +0100

    vnc: only alloc server surface with clients connected

the VNC server was changed so that the 'vd->server' pixman
image was only allocated when a client is connected.

Since then if a client disconnects and then reconnects to
the VNC server all they will see is a black screen until
they do something that triggers a refresh. On a graphical
desktop this is not often noticed since there's many things
going on which cause a refresh. On a plain text console it
is really obvious since nothing refreshes frequently.

The problem is that the VNC server didn't update the guest
dirty bitmap, so still believes its server image is in sync
with the guest contents.

To fix this we must explicitly mark the entire guest desktop
as dirty after re-creating the server surface. Move this
logic into vnc_update_server_surface() so it is guaranteed
to be call in all code paths that re-create the surface
instead of only in vnc_dpy_switch()

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Tested-by: Peter Lieven <pl@kamp.de>
Message-id: 1471365032-18096-1-git-send-email-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoMerge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
Peter Maydell [Wed, 24 Aug 2016 16:21:03 +0000 (17:21 +0100)] 
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio: fixes

some bugfixes for virtio
balloon is still broken wrt migration

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 23 Aug 2016 17:33:11 BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  virtio: decrement vq->inuse in virtqueue_discard()
  virtio: recalculate vq->inuse after migration

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoFix bsd-user build after d915b7bb
Ed Maste [Mon, 22 Aug 2016 14:57:13 +0000 (10:57 -0400)] 
Fix bsd-user build after d915b7bb

Must include "qemu-version.h" for the QEMU_PKGVERSION definition.

Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-id: 1471877833-52343-1-git-send-email-emaste@freebsd.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agovirtio: decrement vq->inuse in virtqueue_discard()
Stefan Hajnoczi [Mon, 15 Aug 2016 12:54:16 +0000 (13:54 +0100)] 
virtio: decrement vq->inuse in virtqueue_discard()

virtqueue_discard() moves vq->last_avail_idx back so the element can be
popped again.  It's necessary to decrement vq->inuse to avoid "leaking"
the element count.

Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
4 years agovirtio: recalculate vq->inuse after migration
Stefan Hajnoczi [Mon, 15 Aug 2016 12:54:15 +0000 (13:54 +0100)] 
virtio: recalculate vq->inuse after migration

The vq->inuse field is not migrated.  Many devices don't hold
VirtQueueElements across migration so it doesn't matter that vq->inuse
starts at 0 on the destination QEMU.

At least virtio-serial, virtio-blk, and virtio-balloon migrate while
holding VirtQueueElements.  For these devices we need to recalculate
vq->inuse upon load so the value is correct.

Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
4 years agoUpdate version for v2.7.0-rc4 release v2.7.0-rc4
Peter Maydell [Mon, 22 Aug 2016 14:29:41 +0000 (15:29 +0100)] 
Update version for v2.7.0-rc4 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoMerge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
Peter Maydell [Mon, 22 Aug 2016 09:02:28 +0000 (10:02 +0100)] 
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Mon 22 Aug 2016 09:06:32 BST
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  e1000e: remove internal interrupt flag
  slirp: fix segv when init failed

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoe1000e: remove internal interrupt flag
Cao jin [Thu, 18 Aug 2016 14:15:54 +0000 (22:15 +0800)] 
e1000e: remove internal interrupt flag

Commit 66bf7d58 removed internal msi state flag E1000E_USE_MSI, E1000E_USE_MSIX
is not necessary too, remove it now. And interrupt flag field intr_state also
can be removed now.

CC: Dmitry Fleytman <dmitry@daynix.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
4 years agoslirp: fix segv when init failed
Marc-André Lureau [Thu, 18 Aug 2016 13:44:05 +0000 (17:44 +0400)] 
slirp: fix segv when init failed

Since commit f6c2e66ae8c8a, slirp uses an exit notifier to call
slirp_smb_cleanup. However, if init() failed, the notifier isn't added,
and removing it will fail:

==18447== Invalid write of size 8
==18447==    at 0x7EF2B5: notifier_remove (notify.c:32)
==18447==    by 0x48E80C: qemu_remove_exit_notifier (vl.c:2661)
==18447==    by 0x6A2187: net_slirp_cleanup (slirp.c:134)
==18447==    by 0x69419D: qemu_cleanup_net_client (net.c:338)
==18447==    by 0x69445B: qemu_del_net_client (net.c:401)
==18447==    by 0x6A2B81: net_slirp_init (slirp.c:366)
==18447==    by 0x6A4241: net_init_slirp (slirp.c:865)
==18447==    by 0x695C6D: net_client_init1 (net.c:1051)
==18447==    by 0x695F6E: net_client_init (net.c:1108)
==18447==    by 0x696DBA: net_init_netdev (net.c:1498)
==18447==    by 0x7F1F99: qemu_opts_foreach (qemu-option.c:1116)
==18447==    by 0x696E60: net_init_clients (net.c:1516)
==18447==  Address 0x0 is not stack'd, malloc'd or (recently) free'd

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
4 years agotest-logging: don't hard-code paths in /tmp
Sascha Silbe [Thu, 18 Aug 2016 18:46:03 +0000 (20:46 +0200)] 
test-logging: don't hard-code paths in /tmp

Since f6880b7f [qemu-log: support simple pid substitution for logs],
test-logging creates files with hard-coded names in /tmp. In the best
case, this prevents multiple developers from running "make check" on
the same machine. In the worst case, it allows for symlink attacks,
enabling an attacker to overwrite files that are writable to the
developer running "make check".

Instead of hard-coding the paths, create a temporary directory using
g_dir_make_tmp() and clean it up afterwards.

Fixes: f6880b7f ("qemu-log: support simple pid substitution for logs")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1471545963-11720-3-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoglib: add compatibility implementation for g_dir_make_tmp()
Sascha Silbe [Thu, 18 Aug 2016 18:46:02 +0000 (20:46 +0200)] 
glib: add compatibility implementation for g_dir_make_tmp()

We're going to make use of g_dir_make_tmp() in test-logging. Provide a
compatibility implementation of it for glib < 2.30.

May behave differently in some edge cases (e.g. pattern only at the
end of the template, the file name is not part of the error message),
but good enough in practice.

Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1471545963-11720-2-git-send-email-silbe@linux.vnet.ibm.com
[PMM: removed variable "template" which caused compilation failures
 when C++ files include glib-compat.h]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agosyscall.c: Redefine IFLA_* enums
Michal Privoznik [Fri, 19 Aug 2016 08:06:40 +0000 (10:06 +0200)] 
syscall.c: Redefine IFLA_* enums

In 9c37146782 I've tried to fix a broken build with older
linux-headers. However, I didn't do it properly. The solution
implemented here is to grab the enums that caused the problem
initially, and rename their values so that they are "QEMU_"
prefixed. In order to guarantee matching values with actual
enums from linux-headers, the enums are seeded with starting
values from the original enums.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 75c14d6e8a97c4ff3931d69c13eab7376968d8b4.1471593869.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoRevert "syscall.c: Fix build with older linux-headers"
Michal Privoznik [Fri, 19 Aug 2016 08:06:39 +0000 (10:06 +0200)] 
Revert "syscall.c: Fix build with older linux-headers"

The fix I've made there was wrong. I mean, basically what I did
there was equivalent to:

  #if 0
  some code;
  #endif

This reverts commit 9c37146782e7850877d452da47dc451ba73aa62d.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 40d61349e445c1ad5fef795da704bf7ed6e19c86.1471593869.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoMerge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Peter Maydell [Thu, 18 Aug 2016 13:42:51 +0000 (14:42 +0100)] 
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

# gpg: Signature made Thu 18 Aug 2016 14:39:31 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  block: fix possible reorder of flush operations
  block: fix deadlock in bdrv_co_flush

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoblock: fix possible reorder of flush operations
Denis V. Lunev [Wed, 17 Aug 2016 18:06:54 +0000 (21:06 +0300)] 
block: fix possible reorder of flush operations

This patch reduce CPU usage of flush operations a bit. When we have one
flush completed we should kick only next operation. We should not start
all pending operations in the hope that they will go back to wait on
wait_queue.

Also there is a technical possibility that requests will get reordered
with the previous approach. After wakeup all requests are removed from
the wait queue. They become active and they are processed one-by-one
adding to the wait queue in the same order. Though new flush can arrive
while all requests are not put into the queue.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Tested-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Message-id: 1471457214-3994-3-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoblock: fix deadlock in bdrv_co_flush
Evgeny Yakovlev [Wed, 17 Aug 2016 18:06:53 +0000 (21:06 +0300)] 
block: fix deadlock in bdrv_co_flush

The following commit
    commit 3ff2f67a7c24183fcbcfe1332e5223ac6f96438c
    Author: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
    Date:   Mon Jul 18 22:39:52 2016 +0300
    block: ignore flush requests when storage is clean
has introduced a regression.

There is a problem that it is still possible for 2 requests to execute
in non sequential fashion and sometimes this results in a deadlock
when bdrv_drain_one/all are called for BDS with such stalled requests.

1. Current flushed_gen and flush_started_gen is 1.
2. Request 1 enters bdrv_co_flush to with write_gen 1 (i.e. the same
   as flushed_gen). It gets past flushed_gen != flush_started_gen and
   sets flush_started_gen to 1 (again, the same it was before).
3. Request 1 yields somewhere before exiting bdrv_co_flush
4. Request 2 enters bdrv_co_flush with write_gen 2. It gets past
   flushed_gen != flush_started_gen and sets flush_started_gen to 2.
5. Request 2 runs to completion and sets flushed_gen to 2
6. Request 1 is resumed, runs to completion and sets flushed_gen to 1.
   However flush_started_gen is now 2.

From here on out flushed_gen is always != to flush_started_gen and all
further requests will wait on flush_queue. This change replaces
flush_started_gen with an explicitly tracked active flush request.

Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1471457214-3994-2-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoMerge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
Peter Maydell [Thu, 18 Aug 2016 09:56:40 +0000 (10:56 +0100)] 
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Thu 18 Aug 2016 06:36:16 BST
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  net/net: properly handle multiple packets in net_fill_rstate()
  net: vmxnet: use g_new for pkt initialisation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoMerge remote-tracking branch 'remotes/famz/tags/docker-pull-request' into staging
Peter Maydell [Thu, 18 Aug 2016 09:27:57 +0000 (10:27 +0100)] 
Merge remote-tracking branch 'remotes/famz/tags/docker-pull-request' into staging

Fix 'make docker-test-mingw@fedora'

Peter,

This is the single patch that stalls patchew's mingw testing. Since it
is small and trivial, let's have it in 2.7.

Fam

# gpg: Signature made Wed 17 Aug 2016 13:13:53 BST
# gpg:                using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/docker-pull-request:
  curl: Cast fd to int for DPRINTF

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agonet/net: properly handle multiple packets in net_fill_rstate()
Zhang Chen [Thu, 18 Aug 2016 03:23:25 +0000 (11:23 +0800)] 
net/net: properly handle multiple packets in net_fill_rstate()

When network is busy, we will receive multiple packets at one time. In
that situation, we should keep trying to do the receiving instead of
finalizing only the first packet.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
4 years agonet: vmxnet: use g_new for pkt initialisation
Li Qiang [Tue, 16 Aug 2016 11:28:01 +0000 (16:58 +0530)] 
net: vmxnet: use g_new for pkt initialisation

When network transport abstraction layer initialises pkt, the maximum
fragmentation count is not checked. This could lead to an integer
overflow causing a NULL pointer dereference. Replace g_malloc() with
g_new() to catch the multiplication overflow.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
4 years agocurl: Cast fd to int for DPRINTF
Fam Zheng [Mon, 1 Aug 2016 05:04:48 +0000 (13:04 +0800)] 
curl: Cast fd to int for DPRINTF

Currently "make docker-test-mingw@fedora" has a warning like:

    /tmp/qemu-test/src/block/curl.c: In function 'curl_sock_cb':
    /tmp/qemu-test/src/block/curl.c:172:6: warning: format '%d' expects
    argument of type 'int', but argument 4 has type 'curl_socket_t {aka long
    long unsigned int}'
         DPRINTF("CURL (AIO): Sock action %d on fd %d\n", action, fd);
          ^
    cc1: all warnings being treated as errors

Cast to int to suppress it.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1470027888-24381-1-git-send-email-famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
4 years agoUpdate version for v2.7.0-rc3 release v2.7.0-rc3
Peter Maydell [Tue, 16 Aug 2016 16:34:30 +0000 (17:34 +0100)] 
Update version for v2.7.0-rc3 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agolinux-user: Fix llseek with high bit of offset_low set
Peter Maydell [Thu, 11 Aug 2016 17:59:39 +0000 (18:59 +0100)] 
linux-user: Fix llseek with high bit of offset_low set

The llseek syscall takes two 32-bit arguments, offset_high
and offset_low, which must be combined to form a single
64-bit offset. Unfortunately we were combining them with
   (uint64_t)arg2 << 32) | arg3
and arg3 is a signed type; this meant that when promoting
arg3 to a 64-bit type it would be sign-extended. The effect
was that if the offset happened to have bit 31 set then
this bit would get sign-extended into all of bits 63..32.
Explicitly cast arg3 to abi_ulong to avoid the erroneous
sign extension.

Reported-by: Chanho Park <parkch98@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Chanho Park <parkch98@gmail.com>
Message-id: 1470938379-1133-1-git-send-email-peter.maydell@linaro.org

4 years agosyscall.c: Fix build with older linux-headers
Michal Privoznik [Tue, 16 Aug 2016 09:47:43 +0000 (11:47 +0200)] 
syscall.c: Fix build with older linux-headers

In c5dff280 we tried to make us understand netlink messages more.
So we've added a code that does some translation. However, the
code assumed linux-headers to be at least version 4.4 of it
because most of the symbols there (if not all of them) were added
in just that release. This, however, breaks build on systems with
older versions of the package.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-id: 23806aac6db3baf7e2cdab4c62d6e3468ce6b4dc.1471340849.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoqmp-commands.hx: remove outdated note
Marc-André Lureau [Thu, 11 Aug 2016 11:20:41 +0000 (15:20 +0400)] 
qmp-commands.hx: remove outdated note

input-send-event is now stable since
6575ccddf4e7c2484bc14b10d5e89f57506c3953.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20160811112041.18616-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoMerge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
Peter Maydell [Tue, 16 Aug 2016 12:03:15 +0000 (13:03 +0100)] 
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging

target-i386: kernel_irqchip=off fix for KVM

# gpg: Signature made Tue 16 Aug 2016 12:55:42 BST
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-pull-request:
  target-i386: kvm: Report kvm_pv_unhalt as unsupported w/o kernel_irqchip

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agotarget-i386: kvm: Report kvm_pv_unhalt as unsupported w/o kernel_irqchip
Eduardo Habkost [Fri, 12 Aug 2016 18:14:32 +0000 (15:14 -0300)] 
target-i386: kvm: Report kvm_pv_unhalt as unsupported w/o kernel_irqchip

The kvm_pv_unhalt feature doesn't work if kernel_irqchip is
disabled, so we need to report it as unsupported.

Tested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
4 years agoslirp: Rename "struct arphdr" to "struct slirp_arphdr"
Thomas Huth [Mon, 15 Aug 2016 08:24:54 +0000 (10:24 +0200)] 
slirp: Rename "struct arphdr" to "struct slirp_arphdr"

struct arphdr is already used by the system headers on OpenBSD
and thus QEMU does not compile here anymore. Fix it by renaming
our struct to slirp_arphdr instead.

Reported-by: Brad Smith
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1471249494-17392-1-git-send-email-thuth@redhat.com
Buglink: https://bugs.launchpad.net/qemu/+bug/1613133
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agochar: fix waiting for TLS and telnet connection
Marc-André Lureau [Tue, 16 Aug 2016 08:33:32 +0000 (12:33 +0400)] 
char: fix waiting for TLS and telnet connection

Since commit d7a04fd7d5008, tcp_chr_wait_connected() was introduced,
so vhost-user could wait until a backend started successfully. In
vhost-user case, the chr socket must be plain unix, and the chr+vhost
setup happens synchronously during qemu startup.

However, with TLS and telnet socket, initial socket setup happens
asynchronously, and s->connected is not set after the socket is
accepted. In order for tcp_chr_wait_connected() to not keep accepting
new connections and proceed with the last accepted socket, it can
check for s->ioc instead.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20160816083332.15088-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agovirtio-gpu: fix missing log.h include file
Daniel P. Berrange [Mon, 8 Aug 2016 09:31:40 +0000 (10:31 +0100)] 
virtio-gpu: fix missing log.h include file

The virtio-gpu.h file defines a macro VIRTIO_GPU_FILL_CMD
which includes a call to qemu_log_mask, but does not
include qemu/log.h. In a default configure, it is lucky
and gets qemu/log.h indirectly due to the 'log' trace
backend being enabled. If that trace backend is disabled
though, eg

 ./configure --enable-trace-backends=nop

Then the build will fail:

In file included from /home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:19:0:
/home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c: In function ‘virgl_cmd_create_resource_2d’:
/home/berrange/src/virt/qemu/include/hw/virtio/virtio-gpu.h:138:13: error: implicit declaration of function ‘qemu_log_mask’ [-Werror=implicit-function-declaration]
             qemu_log_mask(LOG_GUEST_ERROR,                              \
             ^
/home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:34:5: note: in expansion of macro ‘VIRTIO_GPU_FILL_CMD’
     VIRTIO_GPU_FILL_CMD(c2d);
     ^~~~~~~~~~~~~~~~~~~
/home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:34:5: error: nested extern declaration of ‘qemu_log_mask’ [-Werror=nested-externs]
In file included from /home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:19:0:
/home/berrange/src/virt/qemu/include/hw/virtio/virtio-gpu.h:138:27: error: ‘LOG_GUEST_ERROR’ undeclared (first use in this function)
             qemu_log_mask(LOG_GUEST_ERROR,                              \

[snip many more errors]

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1470648700-3474-1-git-send-email-berrange@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoMerge remote-tracking branch 'remotes/cohuck/tags/s390x-20160816' into staging
Peter Maydell [Tue, 16 Aug 2016 09:45:00 +0000 (10:45 +0100)] 
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20160816' into staging

Build fix for the ccw bios (bios itself not rebuilt).

# gpg: Signature made Tue 16 Aug 2016 08:00:16 BST
# gpg:                using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20160816:
  pc-bios/s390-ccw.img: Fix build

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoMerge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Peter Maydell [Tue, 16 Aug 2016 08:32:40 +0000 (09:32 +0100)] 
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches for 2.7.0-rc3

# gpg: Signature made Mon 15 Aug 2016 14:55:46 BST
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  iotests: Test case for wrong runtime option types
  block/nbd: Store runtime option values
  block/blkdebug: Store config filename
  block/nbd: Use QemuOpts for runtime options
  block/ssh: Use QemuOpts for runtime options

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agopc-bios/s390-ccw.img: Fix build
Christian Borntraeger [Mon, 15 Aug 2016 10:20:49 +0000 (12:20 +0200)] 
pc-bios/s390-ccw.img: Fix build

Since
commit a9c87304b76d ("build-sys: fix building with make CFLAGS=.. argument")

pc-bios/s390-ccw.img build might fail with

--- snip ---
main.o: In function `virtio_setup':
qemu/pc-bios/s390-ccw/main.c:117: undefined reference to `__stack_chk_fail'
--- snip ---

Changing the CFLAGS to QEMU_CFLAGS does the trick. We also need to
add -fno-strict-aliasing as this was filtered out.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1471258997-5811-1-git-send-email-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
4 years agoMerge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160815' into staging
Peter Maydell [Mon, 15 Aug 2016 20:48:03 +0000 (21:48 +0100)] 
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160815' into staging

ppc patch queue for 2016-08-15

Just a single patch here, I hope this is the last ppc / spapr fix to
squeeze into qemu-2.7.

# gpg: Signature made Mon 15 Aug 2016 07:46:36 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.7-20160815:
  ppc: parse cpu features once

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoMerge remote-tracking branch 'remotes/sstabellini/tags/xen-20160812-tag-2' into staging
Peter Maydell [Mon, 15 Aug 2016 18:04:51 +0000 (19:04 +0100)] 
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20160812-tag-2' into staging

Xen 2016/08/12, fixed commit message

# gpg: Signature made Sat 13 Aug 2016 00:39:09 BST
# gpg:                using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3  0AEA 894F 8F48 70E1 AE90

* remotes/sstabellini/tags/xen-20160812-tag-2:
  xen: handle inbound migration of VMs without ioreq server pages
  Xen: fix converity warning of xen_pt_config_init()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoMerge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
Peter Maydell [Mon, 15 Aug 2016 17:27:51 +0000 (18:27 +0100)] 
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

# gpg: Signature made Fri 12 Aug 2016 11:48:03 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
  trace-events: fix first line comment in trace-events

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agopc-bios/optionrom: Fix OpenBSD build with better detection of linker emulation
Peter Maydell [Mon, 8 Aug 2016 16:11:28 +0000 (17:11 +0100)] 
pc-bios/optionrom: Fix OpenBSD build with better detection of linker emulation

The various host OSes are irritatingly variable about the name
of the linker emulation we need to pass to ld's -m option to
build the i386 option ROMs. Instead of doing this via a
CONFIG ifdef, check in configure whether any of the emulation
names we know about will work and pass the right answer through
to the makefile. If we can't find one, we fall back to not trying
to build the option ROMs, in the same way we would for a non-x86
host platform.

This is in particular necessary to unbreak the build on OpenBSD,
since it wants a different answer to FreeBSD and we don't have
an existing CONFIG_ variable that distinguishes the two.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sean Bruno <sbruno@freebsd.org>
Message-id: 1470672688-6754-1-git-send-email-peter.maydell@linaro.org

4 years agosoftfloat: Fix warn about implicit conversion from int to int8_t
Pranith Kumar [Wed, 10 Aug 2016 18:55:02 +0000 (14:55 -0400)] 
softfloat: Fix warn about implicit conversion from int to int8_t

Change the flag type to 'uint8_t' to fix the implicit conversion error.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 20160810185502.32015-1-bobby.prani@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoRevert "vhost-user: Attempt to fix a race with set_mem_table."
Michael S. Tsirkin [Mon, 15 Aug 2016 13:35:24 +0000 (16:35 +0300)] 
Revert "vhost-user: Attempt to fix a race with set_mem_table."

This reverts commit 28ed5ef16384f12500abd3647973ee21b03cbe23.

I still think it's the right thing to do, but
tests have been failing sporadically.

Revert for now, and hope to fix it before the release.

Cc: Prerna Saxena <prerna.saxena@nutanix.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Marc-André Lureau <mlureau@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1471268075-3425-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoiotests: Test case for wrong runtime option types
Max Reitz [Mon, 15 Aug 2016 13:29:27 +0000 (15:29 +0200)] 
iotests: Test case for wrong runtime option types

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
4 years agoblock/nbd: Store runtime option values
Max Reitz [Mon, 15 Aug 2016 13:29:26 +0000 (15:29 +0200)] 
block/nbd: Store runtime option values

Store the runtime option values in the BDRVNBDState so they can later be
used in nbd_refresh_filename() without having to directly access the
options QDict which may contain values of non-string types.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
4 years agoblock/blkdebug: Store config filename
Max Reitz [Mon, 15 Aug 2016 13:29:25 +0000 (15:29 +0200)] 
block/blkdebug: Store config filename

Store the configuration file's filename so it can later be used in
bdrv_refresh_filename() without having to directly access the options
QDict which may contain a value of a non-string type.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
4 years agoblock/nbd: Use QemuOpts for runtime options
Max Reitz [Mon, 15 Aug 2016 13:29:24 +0000 (15:29 +0200)] 
block/nbd: Use QemuOpts for runtime options

Using QemuOpts will prevent qemu from crashing if the input options have
not been validated (which is the case when they are specified on the
command line or in a json: filename) and some have the wrong type.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
4 years agoblock/ssh: Use QemuOpts for runtime options
Max Reitz [Mon, 15 Aug 2016 13:29:23 +0000 (15:29 +0200)] 
block/ssh: Use QemuOpts for runtime options

Using QemuOpts will prevent qemu from crashing if the input options have
not been validated (which is the case when they are specified on the
command line or in a json: filename) and some have the wrong type.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
4 years agoppc: parse cpu features once
Greg Kurz [Wed, 10 Aug 2016 19:08:01 +0000 (21:08 +0200)] 
ppc: parse cpu features once

Considering that features are converted to global properties and
global properties are automatically applied to every new instance
of created CPU (at object_new() time), there is no point in
parsing cpu_model string every time a CPU created. So move
parsing outside CPU creation loop and do it only once.

Parsing also should be done before any CPU is created so that
features would affect the first CPU a well.

This patch does that for all PowerPC machine types.

It is based on previous work from Bharata:

https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg07564.html

Signed-off-by: Greg Kurz <groug@kaod.org>
[clg: only kept the fix for the spapr platform. support for other
      platform will be added in 2.8 ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4 years agoxen: handle inbound migration of VMs without ioreq server pages
Paul Durrant [Mon, 1 Aug 2016 09:16:25 +0000 (10:16 +0100)] 
xen: handle inbound migration of VMs without ioreq server pages

VMs created on older versions on Xen will not have been provisioned with
pages to support creation of non-default ioreq servers. In this case
the ioreq server API is not supported and QEMU's only option is to fall
back to using the default ioreq server pages as it did prior to
commit 3996e85c ("Xen: Use the ioreq-server API when available").

This patch therefore changes the code in xen_common.h to stop considering
a failure of xc_hvm_create_ioreq_server() as a hard failure but simply
as an indication that the guest is too old to support the ioreq server
API. Instead a boolean is set to cause reversion to old behaviour such
that the default ioreq server is then used.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
4 years agoXen: fix converity warning of xen_pt_config_init()
Cao jin [Mon, 25 Jan 2016 12:16:03 +0000 (20:16 +0800)] 
Xen: fix converity warning of xen_pt_config_init()

emu_regs is a pointer, ARRAY_SIZE doesn't return what we expect.
Since the remaining message is enough for debugging, so just remove it.
Also tweaked the message a little.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
4 years agotarget-arm: Fix warn about implicit conversion
Pranith Kumar [Tue, 9 Aug 2016 19:02:28 +0000 (15:02 -0400)] 
target-arm: Fix warn about implicit conversion

Clang warns about an implicit conversion as follows:

/mnt/devops/code/qemu/target-arm/neon_helper.c:1075:1: warning: implicit conversion from 'int' to 'int8_t' (aka 'signed char') changes value from 128 to -128 [-Wconstant-conversion]
NEON_VOP_ENV(qrshl_s8, neon_s8, 4)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/mnt/devops/code/qemu/target-arm/neon_helper.c:116:83: note: expanded from macro 'NEON_VOP_ENV'
uint32_t HELPER(glue(neon_,name))(CPUARMState *env, uint32_t arg1, uint32_t arg2) \
                                                                                  ^
/mnt/devops/code/qemu/target-arm/neon_helper.c:106:5: note: expanded from macro '\
NEON_VOP_BODY'
    NEON_DO##n; \
    ^~~~~~~~~~
<scratch space>:21:1: note: expanded from here
NEON_DO4
^~~~~~~~
/mnt/devops/code/qemu/target-arm/neon_helper.c:93:5: note: expanded from macro 'NEON_DO4'
    NEON_FN(vdest.v1, vsrc1.v1, vsrc2.v1); \
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/mnt/devops/code/qemu/target-arm/neon_helper.c:1054:23: note: expanded from macro 'NEON_FN'
            dest = (1 << (sizeof(src1) * 8 - 1)); \
                 ~  ~~^~~~~~~~~~~~~~~~~~~~~~~~~

Fix it by casting to appropriate type.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agotrace-events: fix first line comment in trace-events
Laurent Vivier [Mon, 8 Aug 2016 15:11:21 +0000 (17:11 +0200)] 
trace-events: fix first line comment in trace-events

Documentation is docs/tracing.txt instead of docs/trace-events.txt.

find . -name trace-events -exec \
     sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \
     {} \;

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoMerge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.7-7' into...
Peter Maydell [Thu, 11 Aug 2016 16:53:35 +0000 (17:53 +0100)] 
Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.7-7' into staging

Migration:
 - couple of bug fixes
 - couple of typo fixes

# gpg: Signature made Thu 11 Aug 2016 12:36:00 BST
# gpg:                using RSA key 0xEB0B4DFC657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg:                 aka "Amit Shah <amit@kernel.org>"
# gpg:                 aka "Amit Shah <amitshah@gmx.net>"
# Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337  2735 1E9A 3B5F 8540 83B6
#      Subkey fingerprint: CC63 D332 AB8F 4617 4529  6534 EB0B 4DFC 657E F670

* remotes/amit-migration/tags/migration-for-2.7-7:
  migration/socket: fix typo in file header
  migration: fix live migration failure with compression
  migration: mmap error check fix
  migration/ram: fix typo

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoUpdate ancient copyright string in -version output
Peter Maydell [Thu, 4 Aug 2016 11:14:36 +0000 (12:14 +0100)] 
Update ancient copyright string in -version output

Currently the -version command line argument prints a string ending
with "Copyright (c) 2003-2008 Fabrice Bellard".  This is now some
eight years out of date; abstract it out of the several places that
print the string and update it to:

Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers

to reflect the work by all the QEMU Project contributors over the
last decade.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1470309276-5012-1-git-send-email-peter.maydell@linaro.org

4 years agoMerge remote-tracking branch 'remotes/amit/tags/vser-for-2.7-1' into staging
Peter Maydell [Thu, 11 Aug 2016 12:26:35 +0000 (13:26 +0100)] 
Merge remote-tracking branch 'remotes/amit/tags/vser-for-2.7-1' into staging

virtio-console: fix receiving data from guest

# gpg: Signature made Thu 11 Aug 2016 12:17:55 BST
# gpg:                using RSA key 0xEB0B4DFC657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg:                 aka "Amit Shah <amit@kernel.org>"
# gpg:                 aka "Amit Shah <amitshah@gmx.net>"
# Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337  2735 1E9A 3B5F 8540 83B6
#      Subkey fingerprint: CC63 D332 AB8F 4617 4529  6534 EB0B 4DFC 657E F670

* remotes/amit/tags/vser-for-2.7-1:
  virtio-console: set frontend open permanently for console devs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agomigration/socket: fix typo in file header
Cao jin [Thu, 28 Jul 2016 08:54:34 +0000 (16:54 +0800)] 
migration/socket: fix typo in file header

Code of inet socket & unix socket is merged together.
Also add some newlines, make code block well separated.

Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469696074-12744-4-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
4 years agomigration: fix live migration failure with compression
Liang Li [Tue, 9 Aug 2016 00:22:26 +0000 (08:22 +0800)] 
migration: fix live migration failure with compression

Because of commit 11808bb0c422, which remove some condition checks
of 'f->ops->writev_buffer', 'qemu_put_qemu_file' should be enhanced
to clear the 'f_src->iovcnt', or 'f_src->iovcnt' may exceed the
MAX_IOV_SIZE which will break live migration. This should be fixed.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Reported-by: Jinshi Zhang <jinshi.c.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1470702146-24399-1-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
4 years agomigration: mmap error check fix
Evgeny Yakovlev [Fri, 29 Jul 2016 09:48:25 +0000 (12:48 +0300)] 
migration: mmap error check fix

mmap man page:
"On success, mmap() returns a pointer to the mapped area. On error, the
value MAP_FAILED (that is, (void *) -1) is returned, and errno  is  set
to indicate the cause of the error."

The check in postcopy_get_tmp_page is definitely wrong and should be
fixed.

Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Message-Id: <1469785705-16670-1-git-send-email-den@openvz.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
4 years agomigration/ram: fix typo
Cao jin [Fri, 29 Jul 2016 07:10:31 +0000 (15:10 +0800)] 
migration/ram: fix typo

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469776231-23820-1-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
4 years agovirtio-console: set frontend open permanently for console devs
Daniel P. Berrange [Wed, 3 Aug 2016 16:22:36 +0000 (17:22 +0100)] 
virtio-console: set frontend open permanently for console devs

The virtio-console.c file handles both serial consoles
and interactive consoles, since they're backed by the
same device model.

Since serial devices are expected to be reliable and
need to notify the guest when the backend is opened
or closed, the virtio-console.c file wires up support
for chardev events. This affects both serial consoles
and interactive consoles, using a network connection
based chardev backend such as 'socket', but not when
using a PTY based backend or plain 'file' backends.

When the host side is not connected the handle_output()
method in virtio-serial-bus.c will drop any data sent
by the guest, before it even reaches the virtio-console.c
code. This means that if the chardev has a logfile
configured, the data will never get logged.

Consider for example, configuring a x86_64 guest with a
plain UART serial port

  -chardev socket,id=charserial1,host=127.0.0.1,port=9001,server,nowait,logfile=console1.log,logappend=on
  -device isa-serial,chardev=charserial1,id=serial1

vs a s390 guest which has to use the virtio-console port

  -chardev socket,id=charconsole1,host=127.0.0.1,port=9000,server,nowait,logfile=console2.log,logappend=on
  -device virtconsole,chardev=charconsole1,id=console1

The isa-serial one gets data written to the log regardless
of whether a client is connected, while the virtioconsole
one only gets data written to the log when a client is
connected.

There is no need for virtio-serial-bus.c to aggressively
drop the data for console devices, as the chardev code is
prefectly capable of discarding the data itself.

So this patch changes virtconsole devices so that they
are always marked as having the host side open. This
ensures that the guest OS will always send any data it
has (Linux virtio-console hvc driver actually ignores
the host open state and sends data regardless, but we
should not rely on that), and also prevents the
virtio-serial-bus code prematurely discarding data.

The behaviour of virtserialport devices is *not* changed,
only virtconsole, because for the former, it is important
that the guest OSknow exactly when the host side is opened
/ closed so it can do any protocol re-negotiation that may
be required.

Fixes bug: https://bugs.launchpad.net/qemu/+bug/1599214

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1470241360-3574-2-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
4 years agoMerge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Peter Maydell [Thu, 11 Aug 2016 10:48:46 +0000 (11:48 +0100)] 
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

# gpg: Signature made Thu 11 Aug 2016 11:35:33 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  linux-aio: Handle io_submit() failure gracefully

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agolinux-aio: Handle io_submit() failure gracefully
Kevin Wolf [Tue, 9 Aug 2016 11:20:19 +0000 (13:20 +0200)] 
linux-aio: Handle io_submit() failure gracefully

It is generally not expected that io_submit() fails other than with
-EAGAIN, but corner cases like SELinux refusing I/O when permissions are
revoked are still possible. In this case, we shouldn't abort, but just
return an I/O error for the request.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1470741619-23231-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
4 years agoMerge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
Peter Maydell [Wed, 10 Aug 2016 16:14:35 +0000 (17:14 +0100)] 
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio/vhost: fixes

some bugfixes for virtio/vhost

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 10 Aug 2016 16:16:22 BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  vhost-user: Attempt to fix a race with set_mem_table.
  vhost-user: Introduce a new protocol feature REPLY_ACK.
  vhost: check for vhost_ops before using.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoMerge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Peter Maydell [Wed, 10 Aug 2016 14:59:08 +0000 (15:59 +0100)] 
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* pc-bios/optionrom/Makefile fixes
* warning fixes for __atomic_load and -1 << x in clang
* missed interrupt fix from Gonglei
* checkpatch fix from Radim and myself

# gpg: Signature made Wed 10 Aug 2016 14:54:31 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  checkpatch: default to success if only warnings
  checkpatch: bump most warnings to errors
  CODING_STYLE, checkpatch: update line length rules
  checkpatch: check for CVS keywords on all sources
  checkpatch: tweak the files in which TABs are checked
  timer: set vm_clock disabled default
  checkpatch: ignore automatically imported Linux headers
  clang: Fix warning reg. expansion to 'defined'
  Disable warn about left shifts of negative values
  atomic: strip "const" from variables declared with typeof
  optionrom: fix compilation with mingw docker target
  optionrom: add -fno-stack-protector
  build-sys: fix building with make CFLAGS=.. argument
  linuxboot_dma: avoid guest ABI breakage on gcc vs. clang compilation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agovhost-user: Attempt to fix a race with set_mem_table.
Prerna Saxena [Fri, 5 Aug 2016 10:53:51 +0000 (03:53 -0700)] 
vhost-user: Attempt to fix a race with set_mem_table.

The set_mem_table command currently does not seek a reply. Hence, there is
no easy way for a remote application to notify to QEMU when it finished
setting up memory, or if there were errors doing so.

As an example:
(1) Qemu sends a SET_MEM_TABLE to the backend (eg, a vhost-user net
application). SET_MEM_TABLE does not require a reply according to the spec.
(2) Qemu commits the memory to the guest.
(3) Guest issues an I/O operation over a new memory region which was configured on (1).
(4) The application has not yet remapped the memory, but it sees the I/O request.
(5) The application cannot satisfy the request because it does not know about those GPAs.

While a guaranteed fix would require a protocol extension (committed separately),
a best-effort workaround for existing applications is to send a GET_FEATURES
message before completing the vhost_user_set_mem_table() call.
Since GET_FEATURES requires a reply, an application that processes vhost-user
messages synchronously would probably have completed the SET_MEM_TABLE before replying.

Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
4 years agovhost-user: Introduce a new protocol feature REPLY_ACK.
Prerna Saxena [Fri, 5 Aug 2016 10:53:50 +0000 (03:53 -0700)] 
vhost-user: Introduce a new protocol feature REPLY_ACK.

This introduces the VHOST_USER_PROTOCOL_F_REPLY_ACK.

If negotiated, client applications should send a u64 payload in
response to any message that contains the "need_reply" bit set
on the message flags. Setting the payload to "zero" indicates the
command finished successfully. Likewise, setting it to "non-zero"
indicates an error.

Currently implemented only for SET_MEM_TABLE.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
4 years agovhost: check for vhost_ops before using.
Ilya Maximets [Wed, 3 Aug 2016 05:22:49 +0000 (08:22 +0300)] 
vhost: check for vhost_ops before using.

'vhost_set_vring_enable()' tries to call function using pointer to
'vhost_ops' which can be already zeroized in 'vhost_dev_cleanup()'
while vhost disconnection.

Fix that by checking 'vhost_ops' before using. This fixes QEMU crash
on calling 'ethtool -L eth0 combined 2' if vhost disconnected.

Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
4 years agoMerge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160810' into staging
Peter Maydell [Wed, 10 Aug 2016 14:13:30 +0000 (15:13 +0100)] 
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160810' into staging

ppc patch queue for 2016-08-10

Here are some more last minute PAPR and ppc related fixes for
qemu-2.7.  One patch makes compressed memory dumps work with guest
kernels using page sizes up to 64KiB.  This is important since most
current pseries guests use a 64KiB default page size.  The remainder
fix a regression with handling of CPU aliases which causes serious
problem for libvirt.

# gpg: Signature made Wed 10 Aug 2016 06:44:27 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.7-20160810:
  ppc/kvm: Register also a generic spapr CPU core family type
  ppc/kvm: Do not mess up the generic CPU family registration
  hw/ppc/spapr: Look up CPU alias names instead of hard-coding the aliases
  ppc: Introduce a function to look up CPU alias strings
  spapr: remove extra type variable
  ppc64: fix compressed dump with pseries kernel

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agocheckpatch: default to success if only warnings
Paolo Bonzini [Tue, 9 Aug 2016 15:47:44 +0000 (17:47 +0200)] 
checkpatch: default to success if only warnings

CHK-level checks have been removed from checkpatch or bumped to
errors, so there is no effect anymore for --strict/--subjective.
Furthermore, even most WARNs have been bumped to errors, with
WARN only reserved to things that patchew probably ought not
to complain about (and that maintainers probably will notice
anyway during review if they are extreme).

Default to exiting with success even if there are WARN-level
failures, and cause --strict to fail for warnings.  Maintainers
that want to have a strict 80-character limit for their subsystem
can add it to a commit hook for example.

The --subjective synonym is removed.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agocheckpatch: bump most warnings to errors
Paolo Bonzini [Tue, 9 Aug 2016 15:47:43 +0000 (17:47 +0200)] 
checkpatch: bump most warnings to errors

This only leaves a warning-level message for the extra-long lines
soft limit.  Everything else is bumped up.

In the future warnings can be added for checks that can have false
positives.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoCODING_STYLE, checkpatch: update line length rules
Paolo Bonzini [Mon, 7 Sep 2015 09:53:02 +0000 (11:53 +0200)] 
CODING_STYLE, checkpatch: update line length rules

Line lengths above 80 characters do exist.  They are rare, but
they happen from time to time.  An ignored rule is worse than an
exception to the rule, so do the latter.

Some on the list expressed their preference for a soft limit that
is slightly lower than 80 characters, to account for extra characters
in unified diffs (including three-way diffs) and for email quoting.
However, there was no consensus on this so keep the 80-character
soft limit and add a hard limit at 90.

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agocheckpatch: check for CVS keywords on all sources
Paolo Bonzini [Wed, 10 Aug 2016 08:05:03 +0000 (10:05 +0200)] 
checkpatch: check for CVS keywords on all sources

These should apply to all files, not just C/C++.  Tweak the regular
expression to check for whole words, to avoid false positives on Perl
variables starting with "Id".

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agocheckpatch: tweak the files in which TABs are checked
Paolo Bonzini [Tue, 9 Aug 2016 15:47:42 +0000 (17:47 +0200)] 
checkpatch: tweak the files in which TABs are checked

Include Python and shell scripts, and make an exception for Perl
scripts we imported from Linux or elsewhere.

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoppc/kvm: Register also a generic spapr CPU core family type
Thomas Huth [Tue, 9 Aug 2016 17:00:01 +0000 (19:00 +0200)] 
ppc/kvm: Register also a generic spapr CPU core family type

There is a regression with the "-cpu" parameter introduced by
the spapr CPU hotplug code: We used to allow to specify a
"CPU family" name with the "-cpu" parameter when running on KVM so
that the user does not need to know the gory details of the exact
CPU version of the host CPU. For example, it was possible to
use "-cpu POWER8" on a POWER8E host CPU. This behavior does not
work anymore with the new hot-pluggable spapr-cpu-core types.
Since libvirt already heavily depends on the old behavior, this
is quite a severe regression in the QEMU parameter interface.
Let's fix it by supporting a CPU family type for the spapr-cpu-core
on KVM, too.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1363812
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4 years agoppc/kvm: Do not mess up the generic CPU family registration
Thomas Huth [Tue, 9 Aug 2016 17:00:00 +0000 (19:00 +0200)] 
ppc/kvm: Do not mess up the generic CPU family registration

The code for registering the sPAPR CPU host core type has been
added inbetween the generic CPU host core type and the generic
CPU family type. That way the instance_init and the class_init
information got lost when registering the generic CPU family
type. Fix it by moving the generic family registration before
the spapr cpu core registration code.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4 years agohw/ppc/spapr: Look up CPU alias names instead of hard-coding the aliases
Thomas Huth [Tue, 9 Aug 2016 16:59:59 +0000 (18:59 +0200)] 
hw/ppc/spapr: Look up CPU alias names instead of hard-coding the aliases

Hard-coding the CPU alias names in the spapr_cores[] array has
two big disadvantages:

1) We register a real type with the CPU alias name in
   spapr_cpu_core_register_types() - this prevents us from registering
   a CPU family name in kvm_ppc_register_host_cpu_type() with the same
   name (as we do it for the non-hotpluggable CPU types).

2) It's quite cumbersome to maintain the aliases here in sync with the
   ppc_cpu_aliases list from target-ppc/cpu-models.c.

So let's simply add proper alias lookup to the spapr cpu core code,
too (by checking whether the given model can be used directly, and
if not by trying to look up the given model as an alias name instead).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4 years agoppc: Introduce a function to look up CPU alias strings
Thomas Huth [Tue, 9 Aug 2016 16:59:58 +0000 (18:59 +0200)] 
ppc: Introduce a function to look up CPU alias strings

We will need this function to look up the aliases in the
spapr-cpu-core code, too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4 years agospapr: remove extra type variable
Cédric Le Goater [Tue, 9 Aug 2016 16:59:57 +0000 (18:59 +0200)] 
spapr: remove extra type variable

The sPAPR CPU core typename is already available in the upper
block. Let's use it and move the check upward also.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4 years agoppc64: fix compressed dump with pseries kernel
Laurent Vivier [Mon, 8 Aug 2016 13:08:53 +0000 (15:08 +0200)] 
ppc64: fix compressed dump with pseries kernel

If we don't provide the page size in target-ppc:cpu_get_dump_info(),
the default one (TARGET_PAGE_SIZE, 4KB) is used to create
the compressed dump. It works fine with Macintosh, but not with
pseries as the kernel default page size is 64KB.

Without this patch, if we generate a compressed dump in the QEMU monitor:

    (qemu) dump-guest-memory -z qemu.dump

This dump cannot be read by crash:

    # crash vmlinux qemu.dump
    ...
    WARNING: cannot translate vmemmap kernel virtual addresses:
             commands requiring page structure contents will fail
    ...

Page_size is used to determine the dumpfile's block size. The
block size needs to be at least the page size, but a multiple of page
size works fine too. For PPC64, linux supports either 4KB or 64KB software
page size. So we define the page_size to 64KB.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4 years agotimer: set vm_clock disabled default
Gonglei [Tue, 9 Aug 2016 07:49:15 +0000 (15:49 +0800)] 
timer: set vm_clock disabled default

(commit 80dcfb8532ae76343109a48f12ba8ca1c505c179)
Upon migration, the code use a timer based on vm_clock for 1ns
in the future from post_load to do the event send in case host_connected
differs between migration source and target.

However, it's not guaranteed that the apic is ready to inject irqs into
the guest, and the irq line remained high, resulting in any future interrupts
going unnoticed by the guest as well.

That's because 1) the migration coroutine is not blocked when it get EAGAIN
while reading QEMUFile. 2) The vm_clock is enabled default currently, it doesn't
rely on the calling of vm_start(), that means vm_clock timers can run before
VCPUs are running.

So, let's set the vm_clock disabled default, keep the initial intention of
design for vm_clock timers.

Meanwhile, change the test-aio usecase, using QEMU_CLOCK_REALTIME instead of
QEMU_CLOCK_VIRTUAL as the block code does.

CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1470728955-90600-1-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agocheckpatch: ignore automatically imported Linux headers
Radim Krčmář [Tue, 9 Aug 2016 17:38:41 +0000 (19:38 +0200)] 
checkpatch: ignore automatically imported Linux headers

Linux uses tabs for indentation and checkpatch always complained about
automatically imported headers.  update-linux-headers.sh could be modified to
expand tabs, but there is no real reason to complain about any ugly code in
Linux headers, so skip all hunk-related checks.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoclang: Fix warning reg. expansion to 'defined'
Pranith Kumar [Tue, 9 Aug 2016 19:02:27 +0000 (15:02 -0400)] 
clang: Fix warning reg. expansion to 'defined'

Clang produces the following warning. The warning is detailed here:
https://reviews.llvm.org/D15866. Fix the warning.

/home/pranith/devops/code/qemu/hw/display/qxl.c:507:5: warning: macro expansion producing 'defined' has undefined behavior [-Wexpansion-to-defined]
    ^
/home/pranith/devops/code/qemu/include/ui/qemu-spice.h:46:5: note: expanded from macro 'SPICE_NEEDS_SET_MM_TIME'
  (!defined(SPICE_SERVER_VERSION) || (SPICE_SERVER_VERSION < 0xc06))
    ^
/home/pranith/devops/code/qemu/hw/display/qxl.c:1074:5: warning: macro expansion producing 'defined' has undefined behavior [-Wexpansion-to-defined]
    ^
/home/pranith/devops/code/qemu/include/ui/qemu-spice.h:46:5: note: expanded from macro 'SPICE_NEEDS_SET_MM_TIME'
  (!defined(SPICE_SERVER_VERSION) || (SPICE_SERVER_VERSION < 0xc06))

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoDisable warn about left shifts of negative values
Pranith Kumar [Tue, 9 Aug 2016 19:02:26 +0000 (15:02 -0400)] 
Disable warn about left shifts of negative values

It seems like there's no good reason for the compiler to exploit the
undefinedness of left shifts.  GCC explicitly documents that they do not
use at all this possibility and, while they also say this is subject
to change, they have been saying this for 10 years (since the wording
appeared in the GCC 4.0 manual).

Disable these warnings by passing in -Wno-shift-negative-value.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[pranith: forward-port part of patch to 2.7]
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
4 years agoatomic: strip "const" from variables declared with typeof
Paolo Bonzini [Tue, 9 Aug 2016 19:02:24 +0000 (15:02 -0400)] 
atomic: strip "const" from variables declared with typeof

With the latest clang, we have the following warning:

    /home/pranith/devops/code/qemu/include/qemu/seqlock.h:62:21: warning: passing 'typeof (*&sl->sequence) *' (aka 'const unsigned int *') to parameter of type 'unsigned int *' discards qualifiers [-Wincompatible-pointer-types-discards-qualifiers]
        return unlikely(atomic_read(&sl->sequence) != start);
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~
    /home/pranith/devops/code/qemu/include/qemu/atomic.h:58:25: note: expanded from macro 'atomic_read'
        __atomic_load(ptr, &_val, __ATOMIC_RELAXED);     \
                           ^~~~~

Stripping const is a bit tricky due to promotions, but it is doable
with either C11 _Generic or GCC extensions.  Use the latter.

Reported-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[pranith: Add conversion for bool type]
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agooptionrom: fix compilation with mingw docker target
Paolo Bonzini [Tue, 9 Aug 2016 20:50:40 +0000 (22:50 +0200)] 
optionrom: fix compilation with mingw docker target

Two fixes are needed.  First, mingw does not have -D_FORTIFY_SOURCE,
hence --enable-debug disables optimization.  This is not acceptable
for ROMs, which should override CFLAGS to force inclusion of -O2.

Second, PE stores global constructors and destructors using the
following linker script snippet:

     ___CTOR_LIST__ = .; __CTOR_LIST__ = . ;
LONG (-1);*(.ctors); *(.ctor); *(SORT(.ctors.*));  LONG (0);
     ___DTOR_LIST__ = .; __DTOR_LIST__ = . ;
LONG (-1); *(.dtors); *(.dtor); *(SORT(.dtors.*));  LONG (0);

The LONG directives cause the .img files to be 16 bytes too large;
the recently added check to signrom.py catches this.  To fix this,
replace -T and -e options with a linker script.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agooptionrom: add -fno-stack-protector
Paolo Bonzini [Mon, 8 Aug 2016 08:57:35 +0000 (10:57 +0200)] 
optionrom: add -fno-stack-protector

This is required by OpenBSD.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agobuild-sys: fix building with make CFLAGS=.. argument
Marc-André Lureau [Fri, 5 Aug 2016 08:23:46 +0000 (12:23 +0400)] 
build-sys: fix building with make CFLAGS=.. argument

When calling make with a CFLAGS=.. argument, the -g/-O filter is not
applied, which may result with build failure with ASAN for example. It
could be solved with an 'override' directive on CFLAGS, but that would
actually prevent setting different CFLAGS manually.

Instead, filter the CFLAGS argument from the top-level Makefile (so
you could still call make with a different CFLAGS argument on a
rom/Makefile manually)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20160805082421.21994-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agolinuxboot_dma: avoid guest ABI breakage on gcc vs. clang compilation
Paolo Bonzini [Fri, 5 Aug 2016 08:51:37 +0000 (10:51 +0200)] 
linuxboot_dma: avoid guest ABI breakage on gcc vs. clang compilation

Recent GCC compiles linuxboot_dma.c to 921 bytes, while CentOS 6 needs
1029 and clang needs 1527.  Because the size of the ROM, rounded to the
next 512 bytes, must match, this causes the API to break between a <1K
ROM and one that is bigger.

We want to make the ROM 1.5 KB in size, but it's better to make clang
produce leaner ROMs, because currently it is worryingly close to the limit.
To fix this prevent clang's happy inlining (which -Os cannot prevent).
This only requires adding a noinline attribute.

Second, the patch makes sure that the ROM has enough padding to prevent
ABI breakage on different compilers.  The size is now hardcoded in the file
that is passed to signrom.py, as was the case before commit 6f71b77
("scripts/signrom.py: Allow option ROM checksum script to write the size
header.", 2016-05-23); signrom.py however will still pad the input to
the requested size.  This ensures that the padding goes beyond the
next multiple of 512 if necessary, and also avoids the need for
-fno-toplevel-reorder which clang doesn't support.  signrom.py can then
error out if the requested size is too small for the actual size of the
compiled ROM.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoMerge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging
Peter Maydell [Tue, 9 Aug 2016 15:53:32 +0000 (16:53 +0100)] 
Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging

# gpg: Signature made Tue 09 Aug 2016 16:47:32 BST
# gpg:                using RSA key 0x7DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/ide-pull-request:
  atapi: fix halted DMA reset

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoatapi: fix halted DMA reset
John Snow [Tue, 9 Aug 2016 15:47:23 +0000 (11:47 -0400)] 
atapi: fix halted DMA reset

Followup to 87ac25fd, this time for ATAPI DMA.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1470164128-28158-1-git-send-email-jsnow@redhat.com
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
4 years agoMerge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
Peter Maydell [Tue, 9 Aug 2016 09:44:27 +0000 (10:44 +0100)] 
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Tue 09 Aug 2016 08:28:39 BST
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  hw/net: Fix a heap overflow in xlnx.xps-ethernetlite
  net: vmxnet3: check for device_active before write
  net: check fragment length during fragmentation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agohw/net: Fix a heap overflow in xlnx.xps-ethernetlite
chaojianhu [Tue, 9 Aug 2016 03:52:54 +0000 (11:52 +0800)] 
hw/net: Fix a heap overflow in xlnx.xps-ethernetlite

The .receive callback of xlnx.xps-ethernetlite doesn't check the length
of data before calling memcpy. As a result, the NetClientState object in
heap will be overflowed. All versions of qemu with xlnx.xps-ethernetlite
will be affected.

Reported-by: chaojianhu <chaojianhu@hotmail.com>
Signed-off-by: chaojianhu <chaojianhu@hotmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
4 years agonet: vmxnet3: check for device_active before write
Li Qiang [Mon, 8 Aug 2016 12:38:31 +0000 (18:08 +0530)] 
net: vmxnet3: check for device_active before write

Vmxnet3 device emulator does not check if the device is active,
before using it for write. It leads to a use after free issue,
if the vmxnet3_io_bar0_write routine is called after the device is
deactivated. Add check to avoid it.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
4 years agonet: check fragment length during fragmentation
Prasad J Pandit [Thu, 4 Aug 2016 07:30:14 +0000 (13:00 +0530)] 
net: check fragment length during fragmentation

Network transport abstraction layer supports packet fragmentation.
While fragmenting a packet, it checks for more fragments from
packet length and current fragment length. It is susceptible
to an infinite loop, if the current fragment length is zero.
Add check to avoid it.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
4 years agoUpdate version for v2.7.0-rc2 release v2.7.0-rc2
Peter Maydell [Mon, 8 Aug 2016 16:26:11 +0000 (17:26 +0100)] 
Update version for v2.7.0-rc2 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4 years agoMerge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2016-08-08' into staging
Peter Maydell [Mon, 8 Aug 2016 14:57:06 +0000 (15:57 +0100)] 
Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2016-08-08' into staging

Monitor patches for 2016-08-08

# gpg: Signature made Mon 08 Aug 2016 13:24:42 BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2016-08-08:
  audio: clean up before monitor clean up
  monitor: fix crash when leaving qemu with spice audio

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>