qemu.git
3 years ago9p: write lock path in v9fs_co_open2()
Greg Kurz [Wed, 7 Nov 2018 00:00:04 +0000 (01:00 +0100)] 
9p: write lock path in v9fs_co_open2()

The assumption that the fid cannot be used by any other operation is
wrong. At least, nothing prevents a misbehaving client to create a
file with a given fid, and to pass this fid to some other operation
at the same time (ie, without waiting for the response to the creation
request). The call to v9fs_path_copy() performed by the worker thread
after the file was created can race with any access to the fid path
performed by some other thread. This causes use-after-free issues that
can be detected by ASAN with a custom 9p client.

Unlike other operations that only read the fid path, v9fs_co_open2()
does modify it. It should hence take the write lock.

Cc: P J P <ppandit@redhat.com>
Reported-by: zhibin hu <noirfate@gmail.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
3 years agotcg/tcg-op.h: Add multiple include guard
Peter Maydell [Thu, 8 Nov 2018 12:52:56 +0000 (12:52 +0000)] 
tcg/tcg-op.h: Add multiple include guard

The tcg-op.h header was missing the usual guard against multiple
inclusion; add it.

(Spotted by lgtm.com's static analyzer.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181108125256.30986-1-peter.maydell@linaro.org

3 years agoMerge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20181108' into staging
Peter Maydell [Thu, 8 Nov 2018 14:42:37 +0000 (14:42 +0000)] 
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20181108' into staging

ppc patch queue 2018-11-08

Here's another patch of accumulated ppc patches for qemu-3.1.
Highlights are:
  * Support for nested HV KVM on POWER9 hosts
  * Remove Alex Graf as ppc maintainer
  * Emulation of external PID instructions

# gpg: Signature made Thu 08 Nov 2018 12:14:27 GMT
# gpg:                using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.1-20181108: (22 commits)
  ppc/spapr_caps: Add SPAPR_CAP_NESTED_KVM_HV
  target/ppc: Add one reg id for ptcr
  This patch fixes processing of rfi instructions in icount mode.
  hw/ppc/ppc440_uc: Remove dead code in sdram_size()
  MAINTAINERS: PPC: Remove myself
  ppc/pnv: check size before data buffer access
  target/ppc: fix mtmsr instruction for icount
  hw/ppc/mac_newworld: Free openpic_irqs array after use
  macio/pmu: Fix missing vmsd terminator
  spapr_pci: convert g_malloc() to g_new()
  target/ppc: Split out float_invalid_cvt
  target/ppc: Split out float_invalid_op_div
  target/ppc: Split out float_invalid_op_mul
  target/ppc: Split out float_invalid_op_addsub
  target/ppc: Introduce fp number classification
  target/ppc: Remove float_check_status
  target/ppc: Split up float_invalid_op_excp
  hw/ppc/spapr_rng: Introduce CONFIG_SPAPR_RNG switch for spapr_rng.c
  PPC: e500: convert SysBus init method to a realize method
  ppc4xx_pci: convert SysBus init method to a realize method
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoreplay: Exit on errors reading from replay log
Peter Maydell [Tue, 6 Nov 2018 15:33:30 +0000 (15:33 +0000)] 
replay: Exit on errors reading from replay log

Currently replay_get_byte() does not check for an error
from getc(). Coverity points out (CID 1390622) that this
could result in unexpected behaviour (such as looping
forever, if we use the replay_get_dword() return value
for a loop count). We don't expect reads from the replay
log to fail, and if they do there is no way we can
continue. So make them fatal errors.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20181106153330.5139-1-peter.maydell@linaro.org

3 years agoMerge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Peter Maydell [Thu, 8 Nov 2018 10:01:51 +0000 (10:01 +0000)] 
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* icount fix (Clement)
* dumping fixes for non-volatile memory (Marc-André, myself)
* x86 emulation fix (Rudolf)
* recent Hyper-V CPUID flag (Vitaly)
* Q35 doc fix (Daniel)
* lsi fix (Prasad)
* SCSI block limits emulation fixes (myself)
* qemu_thread_atexit rework (Peter)
* ivshmem memory leak fix (Igor)

# gpg: Signature made Tue 06 Nov 2018 21:34:30 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  util/qemu-thread-posix: Fix qemu_thread_atexit* for OSX
  include/qemu/thread.h: Document qemu_thread_atexit* API
  scsi-generic: do not do VPD emulation for sense other than ILLEGAL_REQUEST
  scsi-generic: avoid invalid access to struct when emulating block limits
  scsi-generic: avoid out-of-bounds access to VPD page list
  scsi-generic: keep VPD page list sorted
  lsi53c895a: check message length value is valid
  scripts/dump-guest-memory: Synchronize with guest_phys_blocks_region_add
  memory-mapping: skip non-volatile memory regions in GuestPhysBlockList
  nvdimm: set non-volatile on the memory region
  memory: learn about non-volatile memory region
  target/i386: Clear RF on SYSCALL instruction
  MAINTAINERS: remove or downgrade myself to reviewer from some subsystems
  ivshmem: fix memory backend leak
  i386: clarify that the Q35 machine type implements a P35 chipset
  x86: hv_evmcs CPU flag support
  icount: fix deadlock when all cpus are sleeping

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoppc/spapr_caps: Add SPAPR_CAP_NESTED_KVM_HV
Suraj Jitindar Singh [Mon, 8 Oct 2018 03:25:39 +0000 (14:25 +1100)] 
ppc/spapr_caps: Add SPAPR_CAP_NESTED_KVM_HV

Add the spapr cap SPAPR_CAP_NESTED_KVM_HV to be used to control the
availability of nested kvm-hv to the level 1 (L1) guest.

Assuming a hypervisor with support enabled an L1 guest can be allowed to
use the kvm-hv module (and thus run it's own kvm-hv guests) by setting:
-machine pseries,cap-nested-hv=true
or disabled with:
-machine pseries,cap-nested-hv=false

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agotarget/ppc: Add one reg id for ptcr
Suraj Jitindar Singh [Mon, 8 Oct 2018 03:25:38 +0000 (14:25 +1100)] 
target/ppc: Add one reg id for ptcr

The ptcr (partition table control register) is used to store the address
and size of the partition table. For nested kvm-hv we have a level 1
guest register the location of it's partition table with the hypervisor.
Thus to support migration we need to be able to read this out of kvm
and restore it post migration.

Add the one reg id for the ptcr.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agoThis patch fixes processing of rfi instructions in icount mode.
Maria Klimushenkova [Tue, 30 Oct 2018 12:21:34 +0000 (15:21 +0300)] 
This patch fixes processing of rfi instructions in icount mode.

In this mode writing to interrupt/peripheral state is controlled
by can_do_io flag. This flag must be set explicitly before helper
function invocation.

Signed-off-by: Maria Klimushenkova <maria.klimushenkova@ispras.ru>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agohw/ppc/ppc440_uc: Remove dead code in sdram_size()
Peter Maydell [Tue, 30 Oct 2018 17:03:53 +0000 (17:03 +0000)] 
hw/ppc/ppc440_uc: Remove dead code in sdram_size()

Coverity points out in CID 1390588 that the test for sh == 0
in sdram_size() can never fire, because we calculate sh with
    sh = 1024 - ((bcr >> 6) & 0x3ff);
which must result in a value between 1 and 1024 inclusive.

Without the relevant manual for the SoC, we're not completely
sure of the correct behaviour here, but we can remove the
dead code without changing how QEMU currently behaves.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agoMAINTAINERS: PPC: Remove myself
Alexander Graf [Tue, 30 Oct 2018 09:35:31 +0000 (10:35 +0100)] 
MAINTAINERS: PPC: Remove myself

I haven't really been maintaining any PowerPC code for quite a while now,
so let's reflect reality: David does all the work and embedded PPC is in
"Odd Fixes" state rather than supported now.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agoppc/pnv: check size before data buffer access
Prasad J Pandit [Fri, 26 Oct 2018 12:33:58 +0000 (18:03 +0530)] 
ppc/pnv: check size before data buffer access

While performing PowerNV memory r/w operations, the access length
'sz' could exceed the data[4] buffer size. Add check to avoid OOB
access.

Reported-by: Moguofang <moguofang@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agotarget/ppc: fix mtmsr instruction for icount
Pavel Dovgalyuk [Tue, 30 Oct 2018 09:30:31 +0000 (12:30 +0300)] 
target/ppc: fix mtmsr instruction for icount

This patch fixes processing of mtmsr instructions in icount mode.
In this mode writing to interrupt/peripheral state is controlled
by can_do_io flag. This flag must be set explicitly before helper
function invocation.

Signed-off-by: Maria Klimushenkova <maria.klimushenkova@ispras.ru>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agohw/ppc/mac_newworld: Free openpic_irqs array after use
Peter Maydell [Thu, 1 Nov 2018 16:17:58 +0000 (16:17 +0000)] 
hw/ppc/mac_newworld: Free openpic_irqs array after use

In ppc_core99_init(), we allocate an openpic_irqs array, which
we then use to collect up the various qemu_irqs which we're
going to connect to the interrupt controller. Once we've
called sysbus_connect_irq() to connect them all up, the
array is no longer required, but we forgot to free it.

Since board init is only run once at startup, the memory
leak is not a significant one.

Spotted by Coverity: CID 1192916.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agomacio/pmu: Fix missing vmsd terminator
Dr. David Alan Gilbert [Fri, 27 Jul 2018 12:31:12 +0000 (13:31 +0100)] 
macio/pmu: Fix missing vmsd terminator

Fix missing terminator in VMStateDescription

Fixes: d811d61fbc6ca5f2be2185fd7cfa916e7ba613ce
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agospapr_pci: convert g_malloc() to g_new()
Greg Kurz [Fri, 12 Oct 2018 09:05:09 +0000 (11:05 +0200)] 
spapr_pci: convert g_malloc() to g_new()

When allocating an array, it is a recommended coding practice to call
g_new(FooType, n) instead of g_malloc(n * sizeof(FooType)) because
it takes care to avoid overflow when calculating the size of the
allocated block and it returns FooType *, which allows the compiler
to perform type checking.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agotarget/ppc: Split out float_invalid_cvt
Richard Henderson [Thu, 11 Oct 2018 23:41:59 +0000 (16:41 -0700)] 
target/ppc: Split out float_invalid_cvt

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agotarget/ppc: Split out float_invalid_op_div
Richard Henderson [Thu, 11 Oct 2018 23:41:58 +0000 (16:41 -0700)] 
target/ppc: Split out float_invalid_op_div

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agotarget/ppc: Split out float_invalid_op_mul
Richard Henderson [Thu, 11 Oct 2018 23:41:57 +0000 (16:41 -0700)] 
target/ppc: Split out float_invalid_op_mul

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agotarget/ppc: Split out float_invalid_op_addsub
Richard Henderson [Thu, 11 Oct 2018 23:41:56 +0000 (16:41 -0700)] 
target/ppc: Split out float_invalid_op_addsub

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agotarget/ppc: Introduce fp number classification
Richard Henderson [Thu, 11 Oct 2018 23:41:55 +0000 (16:41 -0700)] 
target/ppc: Introduce fp number classification

Having a separate, logical classifiation of numbers will
unify more error paths for different formats.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agotarget/ppc: Remove float_check_status
Richard Henderson [Thu, 11 Oct 2018 23:41:54 +0000 (16:41 -0700)] 
target/ppc: Remove float_check_status

Use do_float_check_status directly, so that we don't get confused
about which return address we're using.  And definitely don't use
helper_float_check_status.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agotarget/ppc: Split up float_invalid_op_excp
Richard Henderson [Thu, 11 Oct 2018 23:41:53 +0000 (16:41 -0700)] 
target/ppc: Split up float_invalid_op_excp

The always_inline trick only works if the function is always
called from the outer-most helper.  But it isn't, so pass in
the outer-most return address.  There's no need for a switch
statement whose argument is always a constant.  Unravel the
switch and goto via more helpers.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agohw/ppc/spapr_rng: Introduce CONFIG_SPAPR_RNG switch for spapr_rng.c
Thomas Huth [Mon, 8 Oct 2018 12:39:42 +0000 (14:39 +0200)] 
hw/ppc/spapr_rng: Introduce CONFIG_SPAPR_RNG switch for spapr_rng.c

The spapr-rng device is suboptimal when compared to virtio-rng, so
users might want to disable it in their builds. Thus let's introduce
a proper CONFIG switch to allow us to compile QEMU without this device.
The function spapr_rng_populate_dt is required for linking, so move it
to a different location.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agoPPC: e500: convert SysBus init method to a realize method
Cédric Le Goater [Mon, 1 Oct 2018 15:04:13 +0000 (17:04 +0200)] 
PPC: e500: convert SysBus init method to a realize method

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agoppc4xx_pci: convert SysBus init method to a realize method
Cédric Le Goater [Mon, 1 Oct 2018 11:44:21 +0000 (13:44 +0200)] 
ppc4xx_pci: convert SysBus init method to a realize method

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agoppc440_pcix: convert SysBus init method to a realize method
Cédric Le Goater [Mon, 1 Oct 2018 11:44:20 +0000 (13:44 +0200)] 
ppc440_pcix: convert SysBus init method to a realize method

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agotarget/ppc: add external PID support
Roman Kapl [Fri, 21 Sep 2018 06:59:07 +0000 (08:59 +0200)] 
target/ppc: add external PID support

External PID is a mechanism present on BookE 2.06 that enables application to
store/load data from different address spaces. There are special version of some
instructions, which operate on alternate address space, which is specified in
the EPLC/EPSC regiser.

This implementation uses two additional MMU modes (mmu_idx) to provide the
address space for the load and store instructions. The QEMU TLB fill code was
modified to recognize these MMU modes and use the values in EPLC/EPSC to find
the proper entry in he PPC TLB. These two QEMU TLBs are also flushed on each
write to EPLC/EPSC.

Following instructions are implemented: dcbfep dcbstep dcbtep dcbtstep dcbzep
dcbzlep icbiep lbepx ldepx lfdepx lhepx lwepx stbepx stdepx stfdepx sthepx
stwepx.

Following vector instructions are not: evlddepx evstddepx lvepx lvepxl stvepx
stvepxl.

Signed-off-by: Roman Kapl <rka@sysgo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3 years agoutil/qemu-thread-posix: Fix qemu_thread_atexit* for OSX
Peter Maydell [Mon, 5 Nov 2018 13:55:38 +0000 (13:55 +0000)] 
util/qemu-thread-posix: Fix qemu_thread_atexit* for OSX

Our current implementation of qemu_thread_atexit* is broken on OSX.
This is because it works by cerating a piece of thread-specific
data with pthread_key_create() and using the destructor function
for that data to run the notifier function passed to it by
the caller of qemu_thread_atexit_add(). The expected use case
is that the caller uses a __thread variable as the notifier,
and uses the callback to clean up information that it is
keeping per-thread in __thread variables.

Unfortunately, on OSX this does not work, because on OSX
a __thread variable may be destroyed (freed) before the
pthread_key_create() destructor runs. (POSIX imposes no
ordering constraint here; the OSX implementation happens
to implement __thread variables in terms of pthread_key_create((),
whereas Linux uses different mechanisms that mean the __thread
variables will still be present when the pthread_key_create()
destructor is run.)

Fix this by switching to a scheme similar to the one qemu-thread-win32
uses for qemu_thread_atexit: keep the thread's notifiers on a
__thread variable, and run the notifiers on calls to
qemu_thread_exit() and on return from the start routine passed
to qemu_thread_start(). We do this with the pthread_cleanup_push()
API.

We take advantage of the qemu_thread_atexit_add() API
permission not to run thread notifiers on process exit to
avoid having to special case the main thread.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181105135538.28025-3-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoinclude/qemu/thread.h: Document qemu_thread_atexit* API
Peter Maydell [Mon, 5 Nov 2018 13:55:37 +0000 (13:55 +0000)] 
include/qemu/thread.h: Document qemu_thread_atexit* API

Add documentation for the qemu_thread_atexit_add() and
qemu_thread_atexit_remove() functions.

We include a (previously undocumented) constraint that notifiers
may not be called if a thread is exiting because the entire
process is exiting. This is fine for our current use because
the callers use it only for cleaning up resources which go away
on process exit (memory, Win32 fibers), and we will need the
flexibility for the new posix implementation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181105135538.28025-2-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoscsi-generic: do not do VPD emulation for sense other than ILLEGAL_REQUEST
Paolo Bonzini [Mon, 22 Oct 2018 22:58:21 +0000 (00:58 +0200)] 
scsi-generic: do not do VPD emulation for sense other than ILLEGAL_REQUEST

Pass other sense, such as UNIT_ATTENTION or BUSY, directly to the
guest.

Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoscsi-generic: avoid invalid access to struct when emulating block limits
Paolo Bonzini [Mon, 22 Oct 2018 22:43:51 +0000 (00:43 +0200)] 
scsi-generic: avoid invalid access to struct when emulating block limits

Emulation of the block limits VPD page called back into scsi-disk.c,
which however expected the request to be for a SCSIDiskState and
accessed a scsi-generic device outside the bounds of its struct
(namely to retrieve s->max_unmap_size and s->max_io_size).

To avoid this, move the emulation code to a separate function that
takes a new SCSIBlockLimits struct and marshals it into the VPD
response format.

Reported-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoscsi-generic: avoid out-of-bounds access to VPD page list
Paolo Bonzini [Mon, 22 Oct 2018 22:58:43 +0000 (00:58 +0200)] 
scsi-generic: avoid out-of-bounds access to VPD page list

A device can report an excessive number of VPD pages when asked for a
list; this can cause an out-of-bounds access to buf in
scsi_generic_set_vpd_bl_emulation.  It should not happen, but
it is technically not incorrect so handle it: do not check any byte
past the allocation length that was sent to the INQUIRY command.

Reported-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoscsi-generic: keep VPD page list sorted
Paolo Bonzini [Mon, 22 Oct 2018 22:46:21 +0000 (00:46 +0200)] 
scsi-generic: keep VPD page list sorted

Block limits emulation is just placing 0xb0 as the final byte of the
VPD pages list.  However, VPD page numbers must be sorted, so change
that to an in-place insert.  Since I couldn't find any disk that triggered
the loop more than once, this was tested by adding manually 0xb1
at the end of the list and checking that 0xb0 was added before.

Reported-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agolsi53c895a: check message length value is valid
Prasad J Pandit [Fri, 26 Oct 2018 19:43:14 +0000 (01:13 +0530)] 
lsi53c895a: check message length value is valid

While writing a message in 'lsi_do_msgin', message length value
in 'msg_len' could be invalid due to an invalid migration stream.
Add an assertion to avoid an out of bounds access, and reject
the incoming migration data if it contains an invalid message
length.

Discovered by Deja vu Security. Reported by Oracle.

Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <20181026194314.18663-1-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoscripts/dump-guest-memory: Synchronize with guest_phys_blocks_region_add
Paolo Bonzini [Mon, 29 Oct 2018 13:49:36 +0000 (14:49 +0100)] 
scripts/dump-guest-memory: Synchronize with guest_phys_blocks_region_add

Recent patches have removed ram_device and nonvolatile RAM
from dump-guest-memory's output.  Do the same for dumps
that are extracted from a QEMU core file.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agomemory-mapping: skip non-volatile memory regions in GuestPhysBlockList
Marc-André Lureau [Wed, 3 Oct 2018 11:44:54 +0000 (15:44 +0400)] 
memory-mapping: skip non-volatile memory regions in GuestPhysBlockList

GuestPhysBlockList is currently used to produce dumps. Given the size
and the typical usage of NVDIMM for storage, they are not a good idea
to have in the dumps. We may want to have an extra dump option to
include them. For now, skip non-volatile regions.

The TCG memory clear function is going to use the GuestPhysBlockList
as well, and will thus skip NVDIMM for similar reasons.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181003114454.5662-4-marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agonvdimm: set non-volatile on the memory region
Marc-André Lureau [Wed, 3 Oct 2018 11:44:53 +0000 (15:44 +0400)] 
nvdimm: set non-volatile on the memory region

qemu-system-x86_64 -machine pc,nvdimm -m 2G,slots=4,maxmem=16G -enable-kvm -monitor stdio -object memory-backend-file,id=mem1,share=on,mem-path=/tmp/foo,size=1G -device nvdimm,id=nvdimm1,memdev=mem1

HMP info mtree command reflects the flag with "nv-" prefix on memory type:

(qemu) info mtree
0000000100000000-000000013fffffff (prio 0, nv-i/o): alias nvdimm-memory @/objects/mem1 0000000000000000-000000003fffffff

(qemu) info mtree -f
0000000100000000-000000013fffffff (prio 0, nv-ram): /objects/mem1

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181003114454.5662-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agomemory: learn about non-volatile memory region
Marc-André Lureau [Wed, 3 Oct 2018 11:44:52 +0000 (15:44 +0400)] 
memory: learn about non-volatile memory region

Add a new flag to mark memory region that are used as non-volatile, by
NVDIMM for example. That bit is propagated down to the flat view, and
reflected in HMP info mtree with a "nv-" prefix on the memory type.

This way, guest_phys_blocks_region_add() can skip the NV memory
regions for dumps and TCG memory clear in a following patch.

Cc: dgilbert@redhat.com
Cc: imammedo@redhat.com
Cc: pbonzini@redhat.com
Cc: guangrong.xiao@linux.intel.com
Cc: mst@redhat.com
Cc: xiaoguangrong.eric@gmail.com
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181003114454.5662-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agotarget/i386: Clear RF on SYSCALL instruction
Rudolf Marek [Fri, 19 Oct 2018 12:24:49 +0000 (14:24 +0200)] 
target/i386: Clear RF on SYSCALL instruction

Fix the SYSCALL instruction in 64-bit (long mode). The RF flag
should be cleared in R11 as well as in the RFLAGS. Intel
and AMD CPUs behave same. AMD has this documented in the
APM vol 3.

Signed-off-by: Roman Kapl <rka@sysgo.com>
Signed-off-by: Rudolf Marek <rudolf.marek@sysgo.com>
Message-Id: <20181019122449.26387-1-rka@sysgo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoMAINTAINERS: remove or downgrade myself to reviewer from some subsystems
Paolo Bonzini [Fri, 19 Oct 2018 12:25:42 +0000 (14:25 +0200)] 
MAINTAINERS: remove or downgrade myself to reviewer from some subsystems

Other people are doing a much better work than myself at handling some
subsystems.  For those files it is better if I downgrade myself to
reviewer or recognize that I am not actually doing any work there.

Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoivshmem: fix memory backend leak
Igor Mammedov [Thu, 1 Nov 2018 10:44:46 +0000 (11:44 +0100)] 
ivshmem: fix memory backend leak

object_new() returns a new backend with refcount == 1 and
then later object_property_add_child() increases refcount to 2
So when ivshmem is destroyed, the backend it has created isn't
destroyed along with it as children cleanup will bring
backend's refcount only to 1, which leaks backend including
resources it is using.

Drop the original reference from object_new() once backend
is attached to its parent.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1541069086-167036-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Fixes: 5503e285041979dd29698ecb41729b3b22622e8d
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoi386: clarify that the Q35 machine type implements a P35 chipset
Daniel P. Berrangé [Thu, 30 Aug 2018 10:57:57 +0000 (11:57 +0100)] 
i386: clarify that the Q35 machine type implements a P35 chipset

The 'q35' machine type implements an Intel Series 3 chipset,
of which there are several variants:

  https://www.intel.com/Assets/PDF/datasheet/316966.pdf

The key difference between the 82P35 MCH ('p35', PCI device ID 0x29c0)
and 82Q35 GMCH ('q35', PCI device ID 0x29b0) variants is that the latter
has an integrated graphics adapter. QEMU does not implement integrated
graphics, so uses the PCI ID for the 82P35 chipset, despite calling the
machine type 'q35'. Thus we rename the PCI device ID constant to reflect
reality, to avoid confusing future developers. The new name more closely
matches what pci.ids reports it to be:

$ grep  P35 /usr/share/hwdata/pci.ids  | grep 29
29c0  82G33/G31/P35/P31 Express DRAM Controller
29c1  82G33/G31/P35/P31 Express PCI Express Root Port
29c4  82G33/G31/P35/P31 Express MEI Controller
29c5  82G33/G31/P35/P31 Express MEI Controller
29c6  82G33/G31/P35/P31 Express PT IDER Controller
29c7  82G33/G31/P35/P31 Express Serial KT Controller

$ grep  Q35 /usr/share/hwdata/pci.ids  | grep 29
29b0  82Q35 Express DRAM Controller
29b1  82Q35 Express PCI Express Root Port
29b2  82Q35 Express Integrated Graphics Controller
29b3  82Q35 Express Integrated Graphics Controller
29b4  82Q35 Express MEI Controller
29b5  82Q35 Express MEI Controller
29b6  82Q35 Express PT IDER Controller
29b7  82Q35 Express Serial KT Controller

Arguably the QEMU machine type should be named 'p35'. At this point in
time, however, it is not worth the churn for management applications &
documentation to worry about renaming it.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180830105757.10577-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agox86: hv_evmcs CPU flag support
Vitaly Kuznetsov [Mon, 22 Oct 2018 16:55:06 +0000 (18:55 +0200)] 
x86: hv_evmcs CPU flag support

Adds a new CPU flag to enable the Enlightened VMCS KVM feature.
QEMU enables KVM_CAP_HYPERV_ENLIGHTENED_VMCS and gets back the
version to be advertised in lower 16 bits of CPUID.0x4000000A:EAX.

Suggested-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20181022165506.30332-3-vkuznets@redhat.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoicount: fix deadlock when all cpus are sleeping
Clement Deschamps [Sun, 21 Oct 2018 14:21:03 +0000 (16:21 +0200)] 
icount: fix deadlock when all cpus are sleeping

When all cpus are sleeping (e.g in WFI), to avoid a deadlock
in the main_loop, wake it up in order to start the warp timer.

Signed-off-by: Clement Deschamps <clement.deschamps@greensocs.com>
Message-Id: <20181021142103.19014-1-clement.deschamps@greensocs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 years agoUpdate version for v3.1.0-rc0 release v3.1.0-rc0
Peter Maydell [Tue, 6 Nov 2018 18:27:35 +0000 (18:27 +0000)] 
Update version for v3.1.0-rc0 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoMerge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2018-10-30-v2' into...
Peter Maydell [Tue, 6 Nov 2018 17:58:11 +0000 (17:58 +0000)] 
Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2018-10-30-v2' into staging

Monitor patches for 2018-10-30

# gpg: Signature made Tue 06 Nov 2018 17:37:16 GMT
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2018-10-30-v2:
  vl: Avoid crash when -mon is underspecified
  monitor: delay monitor iothread creation
  monitor: guard iothread access by mon->use_io_thread

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agovl: Avoid crash when -mon is underspecified
Eric Blake [Tue, 23 Oct 2018 21:35:59 +0000 (22:35 +0100)] 
vl: Avoid crash when -mon is underspecified

A quick coredump on an incomplete command line:
./x86_64-softmmu/qemu-system-x86_64 -mon mode=control,pretty=on

 #0  0x00007ffff723d9e4 in g_str_hash () at /lib64/libglib-2.0.so.0
 #1  0x00007ffff723ce38 in g_hash_table_lookup () at /lib64/libglib-2.0.so.0
 #2  0x0000555555cc0073 in object_class_property_find (klass=0x5555566a94b0, name=0x0, errp=0x0) at qom/object.c:1135
 #3  0x0000555555cc004b in object_class_property_find (klass=0x5555566a9440, name=0x0, errp=0x0) at qom/object.c:1129
 #4  0x0000555555cbfe6e in object_property_find (obj=0x5555568348c0, name=0x0, errp=0x0) at qom/object.c:1080
 #5  0x0000555555cc183d in object_resolve_path_component (parent=0x5555568348c0, part=0x0) at qom/object.c:1762
 #6  0x0000555555d82071 in qemu_chr_find (name=0x0) at chardev/char.c:802
 #7  0x00005555559d77cb in mon_init_func (opaque=0x0, opts=0x5555566b65a0, errp=0x0) at vl.c:2291

Fix it to instead fail gracefully.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181023213600.364086-1-eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
3 years agomonitor: delay monitor iothread creation
Wolfgang Bumiller [Tue, 25 Sep 2018 08:15:07 +0000 (10:15 +0200)] 
monitor: delay monitor iothread creation

Commit d32749deb615 moved the call to monitor_init_globals()
to before os_daemonize(), making it an unsuitable place to
spawn the monitor iothread as it won't be inherited over the
fork() in os_daemonize().

We now spawn the thread the first time we instantiate a
monitor which actually has use_io_thread == true.
Instantiation of monitors happens only after os_daemonize().
We still need to create the qmp_dispatcher_bh when not using
iothreads, so this now still happens in
monitor_init_globals().

Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Fixes: d32749deb615 ("monitor: move init global earlier")
Message-Id: <20180925081507.11873-3-w.bumiller@proxmox.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
[This fixes a crash on shutdown with --daemonize]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
3 years agomonitor: guard iothread access by mon->use_io_thread
Wolfgang Bumiller [Tue, 25 Sep 2018 08:15:06 +0000 (10:15 +0200)] 
monitor: guard iothread access by mon->use_io_thread

monitor_resume() and monitor_suspend() both want to
"kick" the I/O thread if it is there, but in
monitor_suspend() lacked the use_io_thread flag condition.
This is required when we later only spawn the thread on
first use.

Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180925081507.11873-2-w.bumiller@proxmox.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
3 years agotests: Fix Python 3 detection on older GNU make versions
Eduardo Habkost [Tue, 6 Nov 2018 14:13:02 +0000 (12:13 -0200)] 
tests: Fix Python 3 detection on older GNU make versions

The $(SHELLSTATUS) variable requires GNU make >= 4.2, but Travis
seems to provide an older version.  Change the existing rules to
use command output instead of exit code, to make it compatible
with older GNU make versions.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoMerge remote-tracking branch 'remotes/kraxel/tags/seabios-20181106-pull-request'...
Peter Maydell [Tue, 6 Nov 2018 13:13:35 +0000 (13:13 +0000)] 
Merge remote-tracking branch 'remotes/kraxel/tags/seabios-20181106-pull-request' into staging

seabios update for 3.1

# gpg: Signature made Tue 06 Nov 2018 11:27:53 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/seabios-20181106-pull-request:
  update seabios to master snapshot

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoMerge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20181106' into...
Peter Maydell [Tue, 6 Nov 2018 12:39:36 +0000 (12:39 +0000)] 
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20181106' into staging

target-arm queue:
 * Remove can't-happen if() from handle_vec_simd_shli()
 * hw/arm/exynos4210: Zero memory allocated for Exynos4210State
 * Set S and PTW in 64-bit PAR format
 * Fix ATS1Hx instructions
 * milkymist: Check for failure trying to load BIOS image

# gpg: Signature made Tue 06 Nov 2018 11:37:30 GMT
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20181106:
  target/arm: Fix ATS1Hx instructions
  target/arm: Set S and PTW in 64-bit PAR format
  hw/arm/exynos4210: Zero memory allocated for Exynos4210State
  milkymist: Check for failure trying to load BIOS image
  target/arm: Remove can't-happen if() from handle_vec_simd_shli()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoMerge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
Peter Maydell [Tue, 6 Nov 2018 11:43:18 +0000 (11:43 +0000)] 
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: fixes, features

AMD IOMMU VAPIC support + fixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 05 Nov 2018 18:24:10 GMT
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (33 commits)
  vhost-scsi: prevent using uninitialized vqs
  piix_pci: fix i440fx data sheet link
  piix: use TYPE_FOO constants than string constats
  i440fx: use ARRAY_SIZE for pam_regions
  pci_bridge: fix typo in comment
  hw/pci: Add missing include
  hw/pci-bridge/ioh3420: Remove unuseful header
  hw/pci-bridge/xio3130: Remove unused functions
  tests/bios-tables-test: add 64-bit PCI MMIO aperture round-up test on Q35
  bios-tables-test: prepare expected files for mmio64
  hw/pci-host/x86: extend the 64-bit PCI hole relative to the fw-assigned base
  hw/pci-host/x86: extract get_pci_hole64_start_value() helpers
  pci-testdev: add optional memory bar
  MAINTAINERS: list "tests/acpi-test-data" files in ACPI/SMBIOS section
  x86_iommu/amd: Enable Guest virtual APIC support
  x86_iommu/amd: Add interrupt remap support when VAPIC is enabled
  i386: acpi: add IVHD device entry for IOAPIC
  x86_iommu/amd: Add interrupt remap support when VAPIC is not enabled
  x86_iommu/amd: Prepare for interrupt remap support
  x86_iommu/amd: make the address space naming consistent with intel-iommu
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agotarget/arm: Fix ATS1Hx instructions
Peter Maydell [Tue, 6 Nov 2018 11:32:14 +0000 (11:32 +0000)] 
target/arm: Fix ATS1Hx instructions

ATS1HR and ATS1HW (which allow AArch32 EL2 to do address translations
on the EL2 translation regime) were implemented in commit 14db7fe09a2c8.
However, we got them wrong: these should do stage 1 address translations
as defined for NS-EL2, which is ARMMMUIdx_S1E2. We were incorrectly
making them perform stage 2 translations.

A few years later in commit 1313e2d7e2cd we forgot entirely that
we'd implemented ATS1Hx, and added a comment that ATS1Hx were
"not supported yet". Remove the comment; there is no extra code
needed to handle these operations in do_ats_write(), because
arm_s1_regime_using_lpae_format() returns true for ARMMMUIdx_S1E2,
which forces 64-bit PAR format.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181016093703.10637-3-peter.maydell@linaro.org
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
3 years agotarget/arm: Set S and PTW in 64-bit PAR format
Peter Maydell [Tue, 6 Nov 2018 11:32:14 +0000 (11:32 +0000)] 
target/arm: Set S and PTW in 64-bit PAR format

In do_ats_write() we construct a PAR value based on the result
of the translation.  A comment says "S2WLK and FSTAGE are always
zero, because we don't implement virtualization".
Since we do in fact now implement virtualization, add the missing
code that sets these bits based on the reported ARMMMUFaultInfo.

(These bits are named PTW and S in ARMv8, so we follow that
convention in the new comments in this patch.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181016093703.10637-2-peter.maydell@linaro.org

3 years agohw/arm/exynos4210: Zero memory allocated for Exynos4210State
Peter Maydell [Tue, 6 Nov 2018 11:32:14 +0000 (11:32 +0000)] 
hw/arm/exynos4210: Zero memory allocated for Exynos4210State

In exynos4210_init() we allocate memory for an Exynos4210State
struct. Generally devices can assume that the memory allocated
for their state struct is zero-initialized; we broke that
assumption here by using g_new(). Use g_new0() instead.
(In particular, some code assumes that the various irq arrays
in the Exynos4210Irq sub-struct are zero-initialized.)

In the longer term, this code should be QOMified, and then
the struct memory will be allocated elsewhere and by functions
which always zero-initalize it; but for 3.1 this is a
simple fix.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181105151132.13884-1-peter.maydell@linaro.org

3 years agomilkymist: Check for failure trying to load BIOS image
Peter Maydell [Tue, 6 Nov 2018 11:32:14 +0000 (11:32 +0000)] 
milkymist: Check for failure trying to load BIOS image

Check the return value from load_image_targphys(), which tells us
whether our attempt to load the BIOS image into RAM failed.
(Spotted by Coverity, CID 1190305.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
Message-id: 20181030170032.1844-1-peter.maydell@linaro.org

3 years agotarget/arm: Remove can't-happen if() from handle_vec_simd_shli()
Peter Maydell [Tue, 6 Nov 2018 11:32:13 +0000 (11:32 +0000)] 
target/arm: Remove can't-happen if() from handle_vec_simd_shli()

In handle_vec_simd_shli() we have a check:
     if (size > 3 && !is_q) {
         unallocated_encoding(s);
         return;
     }
However this can never be true, because we calculate
    int size = 32 - clz32(immh) - 1;
where immh is a 4 bit field which we know cannot be all-zeroes.
So the clz32() return must be in {28,29,30,31} and the resulting
size is in {0,1,2,3}, and "size > 3" is never true.

This unnecessary code confuses Coverity's analysis:
in CID 1396476 it thinks we might later index off the
end of an array because the condition implies that we
might have a size > 3.

Remove the code, and instead assert that the size is in [0..3],
since the decode that enforces that is somewhat distant from
this function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181030162517.21816-1-peter.maydell@linaro.org

3 years agoupdate seabios to master snapshot
Gerd Hoffmann [Tue, 6 Nov 2018 11:23:53 +0000 (12:23 +0100)] 
update seabios to master snapshot

seabios 1.12 release is planned for november.

update seabios to a master branch snapshot so it gets more testing
and to make the delta smaller when updating to -final during freeze.

git shortlog rel-1.11.2..14221cd86e
===================================

Gerd Hoffmann (12):
      optionrom: enable non-vga display devices
      cbvga: factor out cbvga_setup_modes()
      qemu: add bochs-display support
      cbvga_setup_modes: use real mode number instead of 0x140
      cbvga_list_modes: don't list current mode twice
      cbvga_set_mode: disable clearmem in windows x86 emulator.
      bochs_display_setup: return error on failure
      pmm: use tmp zone on oom
      vgasrc: add allocate_pmm()
      qemu: add qemu ramfb support
      cbvga_set_mode: refine clear display logic
      pretty boot menu entry for cdrom drives

Jing Liu (3):
      pci: fix the return value for truncated capability
      pci: clean up the debug message for pci capability found
      pci: recognize RH PCI legacy bridge resource reservation capability

Kevin O'Connor (8):
      docs: Add sercon-port to Runtime_config.md documentation
      paravirt: Only enable sercon in NOGRAPHIC mode if no other console specified
      shadow: Don't invoke a shutdown on reboot unless in a reboot loop
      build: Use git describe --always
      docs: Update Download.md to use git clone via https
      ssdt: Fix building of legacy acpi tables on current iasl compiler
      docs: Update download file link
      sdcard: Increase SDHCI_POWER_ON_TIME to 5ms

Marc-André Lureau (4):
      x86: add readq()
      tpm: generalize init_timeout()
      tpm: use get_tpm_version() callback
      tpm: add TPM CRB device support

Marcel Apfelbaum (1):
      pci: fix 'io hints' capability for RedHat PCI bridges

Matt DeVillier (2):
      nvme: fix I/O queue length calculation overflow
      SeaVGABios/cbvga: Fix bpp for coreboot framebuffer

Nikolay Nikolov (11):
      floppy: Introduce the floppy_dor_read() function
      floppy: Introduce floppy_dor_mask()
      floppy: Introduce FLOPPY_DOR_XXX constants
      floppy: Preserve motor and drive sel bits when resetting the floppy controller
      floppy: Reset the floppy motor count in floppy_drive_pio()
      floppy: Use timer_check() in floppy_wait_irq()
      floppy: hold the DOR reset bit low for 4 microseconds, when resetting
      floppy: Execute a SPECIFY command after sensing the media type
      floppy: Support up to 4 floppy drives when turning on the floppy motor
      floppy: Wait for the floppy motor to reach a stable speed, after starting
      floppy: Send 4 sense interrupt commands during controller initialization

Paul Menzel (1):
      docs/Download: Use more secure HTTPS URLs where possible

Stefan Berger (5):
      tpm: Add support for TPM2 ACPI table
      tpm: Wait for tpmRegValidSts flag on CRB interface before probing
      tpm: revert return values for successful/failed CRB probing
      tpm: when CRB is active, select, lock it, and check addresses
      tpm: Request access to locality 0

Stephen Douthit (3):
      tpm: Refactor duplicated wait code in tis_wait_sts() & crb_wait_reg()
      tpm: Wait for interface startup when probing
      tpm: Handle unimplemented TIS_REG_IFACE_ID in tis_get_tpm_version()

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
3 years agooslib-posix: Use MAP_STACK in qemu_alloc_stack() on OpenBSD
Brad Smith [Fri, 19 Oct 2018 12:52:39 +0000 (08:52 -0400)] 
oslib-posix: Use MAP_STACK in qemu_alloc_stack() on OpenBSD

Use MAP_STACK in qemu_alloc_stack() on OpenBSD.

Added to our 6.4 release.

MAP_STACK      Indicate that the mapping is used as a stack.  This
               flag must be used in combination with MAP_ANON and
               MAP_PRIVATE.

Implement MAP_STACK option for mmap().  Synchronous faults (pagefault and
syscall) confirm the stack register points at MAP_STACK memory, otherwise
SIGSEGV is delivered. sigaltstack() and pthread_attr_setstack() are modified
to create a MAP_STACK sub-region which satisfies alignment requirements.
Observe that MAP_STACK can only be set/cleared by mmap(), which zeroes the
contents of the region -- there is no mprotect() equivalent operation, so
there is no MAP_STACK-adding gadget.

Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181019125239.GA13884@humpty.home.comstyle.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoMerge remote-tracking branch 'remotes/cohuck/tags/s390x-20181105' into staging
Peter Maydell [Tue, 6 Nov 2018 09:10:46 +0000 (09:10 +0000)] 
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20181105' into staging

- some changes in s390x maintainership
- bugfix in vfio-ap

# gpg: Signature made Mon 05 Nov 2018 16:34:03 GMT
# gpg:                using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>"
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20181105:
  MAINTAINERS: s390/boot: the ipl code and the bios belong together
  MAINTAINERS: s390: Remove myself
  MAINTAINERS: s390/pci: add Collin Walling as maintainer for zpci
  MAINTAINERS: s390/virtio-ccw: drop Christian, add Halil
  MAINTAINERS: s390: more maintainers for vfio-ccw
  s390x/vfio-ap: report correct error

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agovhost-scsi: prevent using uninitialized vqs
yuchenlin [Fri, 12 Oct 2018 09:07:52 +0000 (17:07 +0800)] 
vhost-scsi: prevent using uninitialized vqs

There are 3 virtqueues (ctrl, event and cmd) for virtio scsi device,
but seabios will only set the physical address for the 3rd one (cmd).
Then in vhost_virtqueue_start(), virtio_queue_get_desc_addr()
will be 0 for ctrl and event vq.

In this case, ctrl and event vq are not initialized.
vhost_verify_ring_mappings may use uninitialized vhost_virtqueue
such that vhost_verify_ring_part_mapping returns ENOMEM.

When encountered this problem, we got the following logs:

    qemu-system-x86_64: Unable to map available ring for ring 0
    qemu-system-x86_64: Verify ring failure on region 0

Signed-off-by: Forrest Liu <forrestl@synology.com>
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agopiix_pci: fix i440fx data sheet link
Li Qiang [Tue, 23 Oct 2018 22:44:25 +0000 (18:44 -0400)] 
piix_pci: fix i440fx data sheet link

It seems that the intel link is unavailable, change it to point to the
qemu site.

Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
3 years agopiix: use TYPE_FOO constants than string constats
Li Qiang [Thu, 11 Oct 2018 12:38:54 +0000 (05:38 -0700)] 
piix: use TYPE_FOO constants than string constats

Make them more QOMConventional.
Cc:qemu-trivial@nongnu.org

Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agoi440fx: use ARRAY_SIZE for pam_regions
Li Qiang [Thu, 11 Oct 2018 12:14:03 +0000 (05:14 -0700)] 
i440fx: use ARRAY_SIZE for pam_regions

Cc: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agopci_bridge: fix typo in comment
Mao Zhongyi [Thu, 11 Oct 2018 08:25:08 +0000 (16:25 +0800)] 
pci_bridge: fix typo in comment

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agohw/pci: Add missing include
Philippe Mathieu-Daudé [Wed, 10 Oct 2018 21:53:55 +0000 (23:53 +0200)] 
hw/pci: Add missing include

Noted while refactoring:

      CC      mips-softmmu/hw/mips/gt64xxx_pci.o
    In file included from include/hw/pci-host/gt64xxx.h:2,
                     from hw/mips/gt64xxx_pci.c:30:
    include/hw/pci/pci_bus.h:23:5: error: unknown type name ‘PCIIOMMUFunc’
         PCIIOMMUFunc iommu_fn;
         ^~~~~~~~~~~~
    include/hw/pci/pci_bus.h:27:5: error: unknown type name ‘pci_set_irq_fn’
         pci_set_irq_fn set_irq;
         ^~~~~~~~~~~~~~
    include/hw/pci/pci_bus.h:28:5: error: unknown type name ‘pci_map_irq_fn’
         pci_map_irq_fn map_irq;
         ^~~~~~~~~~~~~~
    include/hw/pci/pci_bus.h:29:5: error: unknown type name ‘pci_route_irq_fn’
         pci_route_irq_fn route_intx_to_irq;
         ^~~~~~~~~~~~~~~~
    include/hw/pci/pci_bus.h:31:24: error: ‘PCI_SLOT_MAX’ undeclared here (not in a function)
         PCIDevice *devices[PCI_SLOT_MAX * PCI_FUNC_MAX];
                            ^~~~~~~~~~~~
    include/hw/pci/pci_bus.h:31:39: error: ‘PCI_FUNC_MAX’ undeclared here (not in a function)
         PCIDevice *devices[PCI_SLOT_MAX * PCI_FUNC_MAX];
                                           ^~~~~~~~~~~~
    make[1]: *** [rules.mak:69: hw/mips/gt64xxx_pci.o] Error 1
    make: *** [Makefile:482: subdir-mips-softmmu] Error 2

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agohw/pci-bridge/ioh3420: Remove unuseful header
Philippe Mathieu-Daudé [Wed, 10 Oct 2018 21:53:54 +0000 (23:53 +0200)] 
hw/pci-bridge/ioh3420: Remove unuseful header

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agohw/pci-bridge/xio3130: Remove unused functions
Philippe Mathieu-Daudé [Wed, 10 Oct 2018 21:53:53 +0000 (23:53 +0200)] 
hw/pci-bridge/xio3130: Remove unused functions

Introduced in 48ebf2f90f8 and faf1e708d5b, these functions
were never used. Remove them.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agotests/bios-tables-test: add 64-bit PCI MMIO aperture round-up test on Q35
Laszlo Ersek [Thu, 27 Sep 2018 21:24:36 +0000 (23:24 +0200)] 
tests/bios-tables-test: add 64-bit PCI MMIO aperture round-up test on Q35

In commit 9fa99d2519cb ("hw/pci-host: Fix x86 Host Bridges 64bit PCI
hole", 2017-11-16), we meant to expose such a 64-bit PCI MMIO aperture in
the ACPI DSDT that would be at least as large as the new "pci-hole64-size"
property (2GB on i440fx, 32GB on q35). The goal was to offer "enough"
64-bit MMIO aperture to the guest OS for hotplug purposes.

Previous patch fixed the issue that the aperture is extended relative to
a possibly incorrect base.  This may result in an aperture size that is
smaller than the intent of commit 9fa99d2519cb.

This patch adds a test to make sure it won't happen again.

In the test case being added:
- use 128 MB initial RAM size,
- ask for one DIMM hotplug slot,
- ask for 2 GB maximum RAM size,
- use a pci-testdev with a 64-bit BAR of 2 GB size.

Consequences:

(1) In pc_memory_init() [hw/i386/pc.c], the DIMM hotplug area size is
    initially set to 2048-128 = 1920 MB. (Maximum RAM size minus initial
    RAM size.)

(2) The DIMM area base is set to 4096 MB (because the initial RAM is only
    128 MB -- there is no initial "high RAM").

(3) Due to commit 085f8e88ba73 ("pc: count in 1Gb hugepage alignment when
    sizing hotplug-memory container", 2014-11-24), we add 1 GB for the one
    DIMM hotplug slot that was specified. This sets the DIMM area size to
    1920+1024 = 2944 MB.

(4) The reserved-memory-end address (exclusive) is set to 4096 + 2944 =
    7040 MB (DIMM area base plus DIMM area size).

(5) The reserved-memory-end address is rounded up to GB alignment,
    yielding 7 GB (7168 MB).

(6) Given the 2 GB BAR size of pci-testdev, SeaBIOS allocates said 64-bit
    BAR in 64-bit address space.

(7) Because reserved-memory-end is at 7 GB, it is unaligned for the 2 GB
    BAR. Therefore SeaBIOS allocates the BAR at 8 GB. QEMU then
    (correctly) assigns the root bridge aperture base this BAR address, to
    be exposed in \_SB.PCI0._CRS.

(8) The intent of commit 9fa99d2519cb dictates that QEMU extend the
    aperture size to 32 GB, implying a 40 GB end address. However, QEMU
    performs the extension relative to reserved-memory-end (7 GB), not
    relative to the bridge aperture base that was correctly deduced from
    SeaBIOS's BAR programming (8 GB). Therefore we see 39 GB as the
    aperture end address in \_SB.PCI0._CRS:

> QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
>     0x0000000000000000, // Granularity
>     0x0000000200000000, // Range Minimum
>     0x00000009BFFFFFFF, // Range Maximum
>     0x0000000000000000, // Translation Offset
>     0x00000007C0000000, // Length
>     ,, , AddressRangeMemory, TypeStatic)

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agobios-tables-test: prepare expected files for mmio64
Michael S. Tsirkin [Fri, 26 Oct 2018 01:55:32 +0000 (21:55 -0400)] 
bios-tables-test: prepare expected files for mmio64

test will be added by follow-up patch.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agohw/pci-host/x86: extend the 64-bit PCI hole relative to the fw-assigned base
Laszlo Ersek [Thu, 27 Sep 2018 21:24:38 +0000 (23:24 +0200)] 
hw/pci-host/x86: extend the 64-bit PCI hole relative to the fw-assigned base

In commit 9fa99d2519cb ("hw/pci-host: Fix x86 Host Bridges 64bit PCI
hole", 2017-11-16), we meant to expose such a 64-bit PCI MMIO aperture in
the ACPI DSDT that would be at least as large as the new "pci-hole64-size"
property (2GB on i440fx, 32GB on q35). The goal was to offer "enough"
64-bit MMIO aperture to the guest OS for hotplug purposes.

In that commit, we added or modified five functions:

- pc_pci_hole64_start(): shared between i440fx and q35. Provides a default
  64-bit base, which starts beyond the cold-plugged 64-bit RAM, and skips
  the DIMM hotplug area too (if any).

- i440fx_pcihost_get_pci_hole64_start(), q35_host_get_pci_hole64_start():
  board-specific 64-bit base property getters called abstractly by the
  ACPI generator. Both of these fall back to pc_pci_hole64_start() if the
  firmware didn't program any 64-bit hole (i.e. if the firmware didn't
  assign a 64-bit GPA to any MMIO BAR on any device). Otherwise, they
  honor the firmware's BAR assignments (i.e., they treat the lowest 64-bit
  GPA programmed by the firmware as the base address for the aperture).

- i440fx_pcihost_get_pci_hole64_end(), q35_host_get_pci_hole64_end():
  these intended to extend the aperture to our size recommendation,
  calculated relative to the base of the aperture.

Despite the original intent, i440fx_pcihost_get_pci_hole64_end() and
q35_host_get_pci_hole64_end() currently only extend the aperture relative
to the default base (pc_pci_hole64_start()), ignoring any programming done
by the firmware. This means that our size recommendation may not be met.
Fix it by honoring the firmware's address assignments.

The strange extension sizes were spotted by Alex, in the log of a guest
kernel running on top of OVMF (which prefers to assign 64-bit GPAs to
64-bit BARs).

This change only affects DSDT generation, therefore no new compat property
is being introduced.

Using an i440fx OVMF guest with 5GB RAM, an example _CRS change is:

> @@ -881,9 +881,9 @@
>              QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
>                  0x0000000000000000, // Granularity
>                  0x0000000800000000, // Range Minimum
> -                0x000000080001C0FF, // Range Maximum
> +                0x000000087FFFFFFF, // Range Maximum
>                  0x0000000000000000, // Translation Offset
> -                0x000000000001C100, // Length
> +                0x0000000080000000, // Length
>                  ,, , AddressRangeMemory, TypeStatic)
>          })
>          Device (GPE0)

(On i440fx, the low RAM split is at 3GB, in this case. Therefore, with 5GB
guest RAM and no DIMM hotplug range, pc_pci_hole64_start() returns 4 +
(5-3) = 6 GB. Adding the 2GB extension to that yields 8GB, which is below
the firmware-programmed base of 32GB, before the patch. Therefore, before
the patch, the extension is ineffective. After the patch, we add the 2GB
extension to the firmware-programmed base, namely 32GB.)

Using a q35 OVMF guest with 5GB RAM, an example _CRS change is:

> @@ -3162,9 +3162,9 @@
>              QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
>                  0x0000000000000000, // Granularity
>                  0x0000000800000000, // Range Minimum
> -                0x00000009BFFFFFFF, // Range Maximum
> +                0x0000000FFFFFFFFF, // Range Maximum
>                  0x0000000000000000, // Translation Offset
> -                0x00000001C0000000, // Length
> +                0x0000000800000000, // Length
>                  ,, , AddressRangeMemory, TypeStatic)
>          })
>          Device (GPE0)

(On Q35, the low RAM split is at 2GB. Therefore, with 5GB guest RAM and no
DIMM hotplug range, pc_pci_hole64_start() returns 4 + (5-2) = 7 GB. Adding
the 32GB extension to that yields 39GB (0x0000_0009_BFFF_FFFF + 1), before
the patch. After the patch, we add the 32GB extension to the
firmware-programmed base, namely 32GB.)

The ACPI test data for the bios-tables-test case that we added earlier in
this series are corrected too, as follows:

> @@ -3339,9 +3339,9 @@
>              QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
>                  0x0000000000000000, // Granularity
>                  0x0000000200000000, // Range Minimum
> -                0x00000009BFFFFFFF, // Range Maximum
> +                0x00000009FFFFFFFF, // Range Maximum
>                  0x0000000000000000, // Translation Offset
> -                0x00000007C0000000, // Length
> +                0x0000000800000000, // Length
>                  ,, , AddressRangeMemory, TypeStatic)
>          })
>          Device (GPE0)

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Fixes: 9fa99d2519cbf71f871e46871df12cb446dc1c3e
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agohw/pci-host/x86: extract get_pci_hole64_start_value() helpers
Laszlo Ersek [Thu, 27 Sep 2018 21:24:37 +0000 (23:24 +0200)] 
hw/pci-host/x86: extract get_pci_hole64_start_value() helpers

Expose the calculated "hole64 start" GPAs as plain uint64_t values,
extracting the internals of the current property getters.

This patch doesn't change behavior.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agopci-testdev: add optional memory bar
Gerd Hoffmann [Fri, 28 Sep 2018 06:44:19 +0000 (08:44 +0200)] 
pci-testdev: add optional memory bar

Add memory bar to pci-testdev.  Size is configurable using the membar
property.  Setting the size to zero (default) turns it off.  Can be used
to check whether guests handle large pci bars correctly.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agoMAINTAINERS: list "tests/acpi-test-data" files in ACPI/SMBIOS section
Laszlo Ersek [Thu, 27 Sep 2018 21:24:35 +0000 (23:24 +0200)] 
MAINTAINERS: list "tests/acpi-test-data" files in ACPI/SMBIOS section

The "tests/acpi-test-data" files are currently not covered by any section
in MAINTAINERS, and "scripts/checkpatch.pl" complains when new data files
are added.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agox86_iommu/amd: Enable Guest virtual APIC support
Singh, Brijesh [Mon, 1 Oct 2018 19:44:45 +0000 (19:44 +0000)] 
x86_iommu/amd: Enable Guest virtual APIC support

Now that amd-iommu support interrupt remapping, enable the GASup in IVRS
table and GASup in extended feature register to indicate that IOMMU
support guest virtual APIC mode. GASup provides option to guest OS to
make use of 128-bit IRTE.

Note that the GAMSup is set to zero to indicate that amd-iommu does not
support guest virtual APIC mode (aka AVIC) which would be used for the
nested VMs.

See Table 21 from IOMMU spec for interrupt virtualization controls

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agox86_iommu/amd: Add interrupt remap support when VAPIC is enabled
Singh, Brijesh [Mon, 1 Oct 2018 19:44:43 +0000 (19:44 +0000)] 
x86_iommu/amd: Add interrupt remap support when VAPIC is enabled

Emulate the interrupt remapping support when guest virtual APIC is
enabled.

For more information refer: IOMMU spec rev 3.0 (section 2.2.5.2)

When VAPIC is enabled, it uses interrupt remapping as defined in
Table 22 and Figure 17 from IOMMU spec.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agoi386: acpi: add IVHD device entry for IOAPIC
Singh, Brijesh [Mon, 1 Oct 2018 19:44:41 +0000 (19:44 +0000)] 
i386: acpi: add IVHD device entry for IOAPIC

When interrupt remapping is enabled, add a special IVHD device
(type IOAPIC).

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agox86_iommu/amd: Add interrupt remap support when VAPIC is not enabled
Singh, Brijesh [Mon, 1 Oct 2018 19:44:39 +0000 (19:44 +0000)] 
x86_iommu/amd: Add interrupt remap support when VAPIC is not enabled

Emulate the interrupt remapping support when guest virtual APIC is
not enabled.

For more info Refer: AMD IOMMU spec Rev 3.0 - section 2.2.5.1

When VAPIC is not enabled, it uses interrupt remapping as defined in
Table 20 and Figure 15 from IOMMU spec.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agox86_iommu/amd: Prepare for interrupt remap support
Singh, Brijesh [Mon, 1 Oct 2018 19:44:37 +0000 (19:44 +0000)] 
x86_iommu/amd: Prepare for interrupt remap support

Register the interrupt remapping callback and read/write ops for the
amd-iommu-ir memory region.

amd-iommu-ir is set to higher priority to ensure that this region won't
be masked out by other memory regions.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agox86_iommu/amd: make the address space naming consistent with intel-iommu
Singh, Brijesh [Mon, 1 Oct 2018 19:44:34 +0000 (19:44 +0000)] 
x86_iommu/amd: make the address space naming consistent with intel-iommu

To be consistent with intel-iommu:

- rename the address space to use '_' instead of '-'
- update the memory region relationships

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agox86_iommu/amd: remove V=1 check from amdvi_validate_dte()
Singh, Brijesh [Mon, 1 Oct 2018 19:44:32 +0000 (19:44 +0000)] 
x86_iommu/amd: remove V=1 check from amdvi_validate_dte()

Currently, the amdvi_validate_dte() assumes that a valid DTE will
always have V=1. This is not true. The V=1 means that bit[127:1] are
valid. A valid DTE can have IV=1 and V=0 (i.e address translation
disabled and interrupt remapping enabled)

Remove the V=1 check from amdvi_validate_dte(), make the caller
responsible to check for V or IV bits.

This also fixes a bug in existing code that when error is
detected during the translation we'll fail the translation
instead of assuming a passthrough mode.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agox86_iommu: move vtd_generate_msi_message in common file
Singh, Brijesh [Mon, 1 Oct 2018 19:44:29 +0000 (19:44 +0000)] 
x86_iommu: move vtd_generate_msi_message in common file

The vtd_generate_msi_message() in intel-iommu is used to construct a MSI
Message from IRQ. A similar function will be needed when we add interrupt
remapping support in amd-iommu. Moving the function in common file to
avoid the code duplication. Rename it to x86_iommu_irq_to_msi_message().
There is no logic changes in the code flow.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Suggested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agox86_iommu: move the kernel-irqchip check in common code
Singh, Brijesh [Mon, 1 Oct 2018 19:44:27 +0000 (19:44 +0000)] 
x86_iommu: move the kernel-irqchip check in common code

Interrupt remapping needs kernel-irqchip={off|split} on both Intel and AMD
platforms. Move the check in common place.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agovhost-user-blk: start vhost when guest kicks
Yongji Xie [Wed, 6 Jun 2018 13:24:48 +0000 (21:24 +0800)] 
vhost-user-blk: start vhost when guest kicks

Some old guests (before commit 7a11370e5: "virtio_blk: enable VQs early")
kick virtqueue before setting VIRTIO_CONFIG_S_DRIVER_OK. This violates
the virtio spec. But virtio 1.0 transitional devices support this behaviour.
So we should start vhost when guest kicks in this case.

Signed-off-by: Yongji Xie <xieyongji@baidu.com>
Signed-off-by: Chai Wen <chaiwen@baidu.com>
Signed-off-by: Ni Xun <nixun@baidu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agointel_iommu: handle invalid ce for shadow sync
Peter Xu [Tue, 9 Oct 2018 07:45:43 +0000 (15:45 +0800)] 
intel_iommu: handle invalid ce for shadow sync

We should handle VTD_FR_CONTEXT_ENTRY_P properly when synchronizing
shadow page tables.  Having invalid context entry there is perfectly
valid when we move a device out of an existing domain.  When that
happens, instead of posting an error we invalidate the whole region.

Without this patch, QEMU will crash if we do these steps:

(1) start QEMU with VT-d IOMMU and two 10G NICs (ixgbe)
(2) bind the NICs with vfio-pci in the guest
(3) start testpmd with the NICs applied
(4) stop testpmd
(5) rebind the NIC back to ixgbe kernel driver

The patch should fix it.

Reported-by: Pei Zhang <pezhang@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1627272
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agointel_iommu: move ce fetching out when sync shadow
Peter Xu [Tue, 9 Oct 2018 07:45:42 +0000 (15:45 +0800)] 
intel_iommu: move ce fetching out when sync shadow

There are two callers for vtd_sync_shadow_page_table_range(): one
provided a valid context entry and one not.  Move that fetching
operation into the caller vtd_sync_shadow_page_table() where we need to
fetch the context entry.

Meanwhile, remove the error_report_once() directly since we're already
tracing all the error cases in the previous call.  Instead, return error
number back to caller.  This will not change anything functional since
callers are dropping it after all.

We do this move majorly because we want to do something more later in
vtd_sync_shadow_page_table().

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agointel_iommu: better handling of dmar state switch
Peter Xu [Sat, 29 Sep 2018 03:36:15 +0000 (11:36 +0800)] 
intel_iommu: better handling of dmar state switch

QEMU is not handling the global DMAR switch well, especially when from
"on" to "off".

Let's first take the example of system reset.

Assuming that a guest has IOMMU enabled.  When it reboots, we will drop
all the existing DMAR mappings to handle the system reset, however we'll
still keep the existing memory layouts which has the IOMMU memory region
enabled.  So after the reboot and before the kernel reloads again, there
will be no mapping at all for the host device.  That's problematic since
any software (for example, SeaBIOS) that runs earlier than the kernel
after the reboot will assume the IOMMU is disabled, so any DMA from the
software will fail.

For example, a guest that boots on an assigned NVMe device might fail to
find the boot device after a system reboot/reset and we'll be able to
observe SeaBIOS errors if we capture the debugging log:

  WARNING - Timeout at nvme_wait:144!

Meanwhile, we should see DMAR errors on the host of that NVMe device.
It's the DMA fault that caused a NVMe driver timeout.

The correct fix should be that we do proper switching of device DMA
address spaces when system resets, which will setup correct memory
regions and notify the backend of the devices.  This might not affect
much on non-assigned devices since QEMU VT-d emulation will assume a
default passthrough mapping if DMAR is not enabled in the GCMD
register (please refer to vtd_iommu_translate).  However that's required
for an assigned devices, since that'll rebuild the correct GPA to HPA
mapping that is needed for any DMA operation during guest bootstrap.

Besides the system reset, we have some other places that might change
the global DMAR status and we'd better do the same thing there.  For
example, when we change the state of GCMD register, or the DMAR root
pointer.  Do the same refresh for all these places.  For these two
places we'll also need to explicitly invalidate the context entry cache
and iotlb cache.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1625173
CC: QEMU Stable <qemu-stable@nongnu.org>
Reported-by: Cong Li <coli@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
--
v2:
- do the same for GCMD write, or root pointer update [Alex]
- test is carried out by me this time, by observing the
  vtd_switch_address_space tracepoint after system reboot
v3:
- rewrite commit message as suggested by Alex
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agointel_iommu: introduce vtd_reset_caches()
Peter Xu [Sat, 29 Sep 2018 03:36:14 +0000 (11:36 +0800)] 
intel_iommu: introduce vtd_reset_caches()

Provide the function and use it in vtd_init().  Used to reset both
context entry cache and iotlb cache for the whole IOMMU unit.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agovirtio-blk: fix comment for virtio_blk_rw_complete
Yaowei Bai [Sat, 28 Jul 2018 05:18:44 +0000 (13:18 +0800)] 
virtio-blk: fix comment for virtio_blk_rw_complete

Here should be submit_requests, there is no submit_merged_requests
function.

Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agoconfigure: Use LINKS loop for all build tree symlinks
Peter Maydell [Fri, 2 Nov 2018 11:52:39 +0000 (11:52 +0000)] 
configure: Use LINKS loop for all build tree symlinks

A few places in configure were doing ad-hoc calls to
the symlink function to set up symlinks from the build tree
back to the source tree. We have a loop that does this
already for all files and directories listed in the LINKS
environment variable; use that instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agoconfigure: Rename FILES variable to LINKS
Peter Maydell [Fri, 2 Nov 2018 11:52:38 +0000 (11:52 +0000)] 
configure: Rename FILES variable to LINKS

The FILES variable is used to accumulate a list of things to symlink
from the source tree into the build tree.  These don't have to be
individual files; symlinking an entire directory of data files is
also fine.  Rename it to something less confusing before we add a few
directories to it.

Improve the comment to clarify what DIRS and LINKS do and why
it's not a good idea to add things to LINKS with wildcarding.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agotests: Move tests/hex-loader-check-data/ to tests/data/hex-loader/
Peter Maydell [Fri, 2 Nov 2018 11:52:37 +0000 (11:52 +0000)] 
tests: Move tests/hex-loader-check-data/ to tests/data/hex-loader/

Currently tests/hex-loader-check-data contains data files used
by the hexloader-test, and configure individually symlinks those
data files into the build directory using a wildcard.

Using a wildcard like this is a bad idea, because if a new
data file is added, nothing causes configure to be rerun,
and so no symlink is added for the new file. This can cause
tests to spuriously fail when they can't find their data.
Instead, it's better to symlink an entire directory of
data files. We already have such a directory: tests/data.

Move the data files from tests/hex-loader-check-data/ to
tests/data/hex-loader/, and remove the unnecessary symlinking.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agotests: Move tests/acpi-test-data/ to tests/data/acpi/
Peter Maydell [Fri, 2 Nov 2018 11:52:36 +0000 (11:52 +0000)] 
tests: Move tests/acpi-test-data/ to tests/data/acpi/

Currently tests/acpi-test-data contains data files used by the
bios-tables-test, and configure individually symlinks those
data files into the build directory using a wildcard.

Using a wildcard like this is a bad idea, because if a new
data file is added, nothing causes configure to be rerun,
and so no symlink is added for the new file. This can cause
tests to spuriously fail when they can't find their data.
Instead, it's better to symlink an entire directory of
data files. We already have such a directory: tests/data.

Move the data files from tests/acpi-test-data/ to
tests/data/acpi/, and remove the unnecessary symlinking.

We can remove entirely the note in rebuild-expected-aml.sh
about copying any new data files, because now they will
be in the source directory, not the build directory, and
no copying is required.

(We can't just change the existing tests/acpi-test-data/
to being a symlinked directory, because if we did that and
a developer switched git branches from one after that change
to one before it then configure would end up trashing all
the test files by making them symlinks to themselves.
Changing their path avoids this annoyance.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
3 years agoMerge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Peter Maydell [Mon, 5 Nov 2018 18:03:32 +0000 (18:03 +0000)] 
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- auto-read-only option to fix commit job when used with -blockdev
- Fix help text related qemu-iotests failure (by improving the help text
  and updating the reference output)
- quorum: Add missing checks when adding/removing child nodes
- Don't take address of fields in packed structs
- vvfat: Fix crash when reporting error about too many files in directory

# gpg: Signature made Mon 05 Nov 2018 15:35:25 GMT
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (36 commits)
  include: Add a comment to explain the origin of sizes' lookup table
  vdi: Use a literal number of bytes for DEFAULT_CLUSTER_SIZE
  fw_cfg: Drop newline in @file description
  object: Make option help nicer to read
  qdev-monitor: Make device options help nicer
  chardev: Indent list of chardevs
  option: Make option help nicer to read
  qemu-iotests: Test auto-read-only with -drive and -blockdev
  block: Make auto-read-only=on default for -drive
  iscsi: Support auto-read-only option
  gluster: Support auto-read-only option
  curl: Support auto-read-only option
  file-posix: Support auto-read-only option
  nbd: Support auto-read-only option
  block: Require auto-read-only for existing fallbacks
  rbd: Close image in qemu_rbd_open() error path
  block: Add auto-read-only option
  block: Update flags in bdrv_set_read_only()
  iotest: Test x-blockdev-change on a Quorum
  quorum: Forbid adding children in blkverify mode
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
3 years agoinclude: Add a comment to explain the origin of sizes' lookup table
Leonid Bloch [Sun, 4 Nov 2018 18:07:28 +0000 (18:07 +0000)] 
include: Add a comment to explain the origin of sizes' lookup table

The lookup table for power-of-two sizes was added in commit 540b8492618eb
for the purpose of having convenient shortcuts for these sizes in cases
when the literal number has to be present at compile time, and
expressions as '(1 * KiB)' can not be used. One such case is the
stringification of sizes. Beyond that, it is convenient to use these
shortcuts for all power-of-two sizes, even if they don't have to be
literal numbers.

Despite its convenience, this table introduced 55 lines of "dumb" code,
the purpose and origin of which are obscure without reading the message
of the commit which introduced it. This patch fixes that by adding a
comment to the code itself with a brief explanation for the reasoning
behind this table. This comment includes the short AWK script that
generated the table, so that anyone who's interested could make sure
that the values in it are correct (otherwise these values look as if
they were typed manually).

Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
3 years agovdi: Use a literal number of bytes for DEFAULT_CLUSTER_SIZE
Leonid Bloch [Sun, 4 Nov 2018 18:09:28 +0000 (18:09 +0000)] 
vdi: Use a literal number of bytes for DEFAULT_CLUSTER_SIZE

If an expression is used to define DEFAULT_CLUSTER_SIZE, when compiled,
it will be embedded as a literal expression in the binary (as the
default value) because it is stringified to mark the size of the default
value. Now this is fixed by using a defined number to define this value.

Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
3 years agofw_cfg: Drop newline in @file description
Max Reitz [Fri, 19 Oct 2018 16:49:29 +0000 (18:49 +0200)] 
fw_cfg: Drop newline in @file description

There is no good reason why there should be a newline in this
description, so remove it.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
3 years agoobject: Make option help nicer to read
Max Reitz [Fri, 19 Oct 2018 16:49:28 +0000 (18:49 +0200)] 
object: Make option help nicer to read

Just like in qemu_opts_print_help(), print the object name as a caption
instead of on every single line, indent all options, add angle brackets
around types, and align the descriptions after 24 characters.

Also, indent every object name in the list of available objects.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
3 years agoqdev-monitor: Make device options help nicer
Max Reitz [Fri, 19 Oct 2018 16:49:27 +0000 (18:49 +0200)] 
qdev-monitor: Make device options help nicer

Just like in qemu_opts_print_help(), print the device name as a caption
instead of on every single line, indent all options, add angle brackets
around types, and align the descriptions after 24 characters.  Also,
separate the descriptions with " - " instead of putting them in
parentheses, because that is what we do everywhere else.  This does look
a bit funny here because basically all bits have the description
"on/off", but funny does not mean it is less readable.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>