qemu.git
7 months agotests/qapi/doc-good.json: Prepare for qapi-doc Sphinx extension
Peter Maydell [Fri, 25 Sep 2020 16:22:58 +0000 (17:22 +0100)] 
tests/qapi/doc-good.json: Prepare for qapi-doc Sphinx extension

doc-good.json tests doc comment parser corner cases.  We're about to
largely replace it by a Sphinx extension, which will have different
corner cases.  Tweak the test so it passes both with the old parser
and the Sphinx extension, by making it match the more restrictive
rST syntax:

 * in a single list the bullet types must all match
 * lists must have leading and following blank lines
 * the rules on when and where indentation matters differ
 * the '|' example syntax is going to go away entirely, so stop
   testing it

This will avoid the tests spuriously breaking when we tighten up the
parser code in the following commits.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-4-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
7 months agoqapi/block.json: Add newline after "Example:" for block-latency-histogram-set
Peter Maydell [Fri, 25 Sep 2020 16:22:57 +0000 (17:22 +0100)] 
qapi/block.json: Add newline after "Example:" for block-latency-histogram-set

The block-latency-histogram-set command is the only one which uses
the Example/Examples section with the first line of the documentation
immediately following the ':'. Bring it into line with the rest.

This will allow us to avoid special-casing the indentation handling
for "Examples" sections; instead for Examples as for any other section
header these two indentations will be equivalent:

Examples:
Line one
Line two

Examples: Line one
          Line two

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-3-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
7 months agoqapi: Fix doc comment indentation again
Peter Maydell [Fri, 25 Sep 2020 16:22:56 +0000 (17:22 +0100)] 
qapi: Fix doc comment indentation again

In commit 26ec4e53f2 and similar commits we fixed the indentation
for doc comments in our qapi json files to follow a new stricter
standard for indentation, which permits only:
    @arg: description line 1
          description line 2

or:
    @arg:
    line 1
    line 2

but because the script updates that enforce this are not yet in the
tree we have had a steady trickle of subsequent changes which didn't
follow the new rules.

Fix the latest round of mis-indented doc comments.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-2-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Updated for commit 4c437254b807 and a83e24ba1a5]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
7 months agoqapi: Extract PCI commands to 'pci.json'
Philippe Mathieu-Daudé [Sun, 13 Sep 2020 19:53:48 +0000 (21:53 +0200)] 
qapi: Extract PCI commands to 'pci.json'

Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Extracting the PCI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-9-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
7 months agoqapi: Extract ACPI commands to 'acpi.json'
Philippe Mathieu-Daudé [Sun, 13 Sep 2020 19:53:47 +0000 (21:53 +0200)] 
qapi: Extract ACPI commands to 'acpi.json'

Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Extracting the ACPI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-8-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
7 months agoqapi: Restrict device memory commands to machine code
Philippe Mathieu-Daudé [Sun, 13 Sep 2020 19:53:46 +0000 (21:53 +0200)] 
qapi: Restrict device memory commands to machine code

Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Restricting the memory commands to machine.json pulls less
QAPI-generated code into user-mode.

Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-7-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
7 months agoqapi: Restrict query-uuid command to machine code
Philippe Mathieu-Daudé [Sun, 13 Sep 2020 19:53:45 +0000 (21:53 +0200)] 
qapi: Restrict query-uuid command to machine code

Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Restricting the query-uuid command to machine.json pulls less
QAPI-generated code into user-mode.

Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-6-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
7 months agoqapi: Restrict query-vm-generation-id command to machine code
Philippe Mathieu-Daudé [Sun, 13 Sep 2020 19:53:44 +0000 (21:53 +0200)] 
qapi: Restrict query-vm-generation-id command to machine code

Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Restricting the query-vm-generation-id command to machine.json pulls
less QAPI-generated code into user-mode.

Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-5-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
7 months agoqapi: Restrict balloon-related commands to machine code
Philippe Mathieu-Daudé [Sun, 13 Sep 2020 19:53:43 +0000 (21:53 +0200)] 
qapi: Restrict balloon-related commands to machine code

Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Restricting the balloon-related commands to machine.json pulls less
QAPI-generated code into user-mode.

Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-4-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
7 months agoqapi: Correct balloon documentation
Philippe Mathieu-Daudé [Sun, 13 Sep 2020 19:53:42 +0000 (21:53 +0200)] 
qapi: Correct balloon documentation

The documentation incorrectly uses the "size of the balloon"
description when it should be "logical size of the VM". Fix it.

The relation between both values is:

  logical_vm_size = vm_ram_size - balloon_size

Reported-by: David Hildenbrand <david@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-3-philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
7 months agoqapi: Restrict LostTickPolicy enum to machine code
Philippe Mathieu-Daudé [Sun, 13 Sep 2020 19:53:41 +0000 (21:53 +0200)] 
qapi: Restrict LostTickPolicy enum to machine code

Restricting LostTickPolicy to machine.json pulls slightly less
QAPI-generated code into user-mode.

Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-2-philmd@redhat.com>
[Add rationale to commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
7 months agoMerge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
Peter Maydell [Tue, 29 Sep 2020 12:18:54 +0000 (13:18 +0100)] 
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

acpi: fixup

My last pull included a ton of useless files by mistake.
Drop them all.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 29 Sep 2020 12:12:20 BST
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  tests/acpi: drop unnecessary files

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
7 months agotests/acpi: drop unnecessary files
Michael S. Tsirkin [Tue, 29 Sep 2020 11:07:45 +0000 (07:07 -0400)] 
tests/acpi: drop unnecessary files

The last pull added a ton of useless files by mistake.
Drop them all.

Fixes: 0ed93f4c05896 ("update golden master DSDT binary table blobs for q35")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agoMerge remote-tracking branch 'remotes/kraxel/tags/vga-20200929-pull-request' into...
Peter Maydell [Tue, 29 Sep 2020 11:03:06 +0000 (12:03 +0100)] 
Merge remote-tracking branch 'remotes/kraxel/tags/vga-20200929-pull-request' into staging

virtio-vga: reset fix, bigendian fix.
virtio-vga+spice: set monitor dimension via edid.

# gpg: Signature made Tue 29 Sep 2020 10:57:01 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20200929-pull-request:
  ppc/pseries: enable big-endian-framebuffer quirk for bochs-display and virtio-vga
  virtio-vga: implement big-endian-framebuffer property
  virtio-gpu: set physical dimensions for EDID
  spice: get monitors physical dimension
  spice: remove the single monitor config logic
  ui: add getter for UIInfo
  edid: use physical dimensions if available
  edid: fix physical display size computation
  virtio-gpu-3d: fix abnormal display after a warm reboot

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
7 months agoMerge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
Peter Maydell [Tue, 29 Sep 2020 10:10:29 +0000 (11:10 +0100)] 
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,pc,acpi: fixes, tests

Fixes and tests all over the place.
Batch iommu updates for vdpa.
Removal of deprecated cpu hotplug commands.
SMBIOS OEM string support.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 29 Sep 2020 08:09:21 BST
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (48 commits)
  libvhost-user: return on error in vu_log_queue_fill()
  libvhost-user: return early on virtqueue errors
  hw: virtio-pmem: detach the element fromt the virtqueue when error occurs
  tests/acpi: update golden master DSDT binary table blobs for q35
  piix4: don't reserve hw resources when hotplug is off globally
  Add ACPI DSDT tables for q35 that are being updated by the next patch
  tests/acpi: add newly added acpi DSDT table blob for pci bridge hotplug flag
  tests/acpi: unit test for 'acpi-pci-hotplug-with-bridge-support' bridge flag
  tests/acpi: list added acpi table binary file for pci bridge hotplug test
  i440fx/acpi: do not add hotplug related amls for cold plugged bridges
  Fix a gap where acpi_pcihp_find_hotplug_bus() returns a non-hotpluggable bus
  tests/acpi: add a new ACPI table in order to test root pci hotplug on/off
  tests/acpi: add new unit test to test hotplug off/on feature on the root pci bus
  tests/acpi: mark addition of table DSDT.roothp for unit testing root pci hotplug
  vhost-user: save features of multiqueues if chardev is closed
  qemu-options: document SMBIOS type 11 settings
  hw/smbios: report error if table size is too large
  hw/smbios: support loading OEM strings values from a file
  tests: acpi: update acpi blobs with new AML
  x68: acpi: trigger SMI before sending hotplug Notify event to OSPM
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
7 months agoMerge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200928a' into...
Peter Maydell [Tue, 29 Sep 2020 09:29:46 +0000 (10:29 +0100)] 
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200928a' into staging

Migration: Revert one patch for 068 fix

One patch in the last pull broke test 068 which
does a pair of vmload's.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 28 Sep 2020 16:19:17 BST
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20200928a:
  Revert "migration: Properly destroy variables on incoming side"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
7 months agoppc/pseries: enable big-endian-framebuffer quirk for bochs-display and virtio-vga
Gerd Hoffmann [Mon, 28 Sep 2020 08:53:35 +0000 (10:53 +0200)] 
ppc/pseries: enable big-endian-framebuffer quirk for bochs-display and virtio-vga

Already done for stdvga and secondary-vga, bochs-display and virtio-vga
support the big-endian-framebuffer property too.  Fixes blue console
background at boot (offb firmware console).

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1881912
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200928085335.21961-3-kraxel@redhat.com

7 months agovirtio-vga: implement big-endian-framebuffer property
Gerd Hoffmann [Mon, 28 Sep 2020 08:53:34 +0000 (10:53 +0200)] 
virtio-vga: implement big-endian-framebuffer property

Allows to switch the (vga mode) framebuffer into bigendian mode
by setting the property, simliar to stdvga.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200928085335.21961-2-kraxel@redhat.com

7 months agovirtio-gpu: set physical dimensions for EDID
Marc-André Lureau [Sun, 27 Sep 2020 14:57:51 +0000 (18:57 +0400)] 
virtio-gpu: set physical dimensions for EDID

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-7-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
7 months agospice: get monitors physical dimension
Marc-André Lureau [Sun, 27 Sep 2020 14:57:50 +0000 (18:57 +0400)] 
spice: get monitors physical dimension

With upcoming Spice server version 0.14.4, the monitor configuration can
contain additional fields for the monitor physical dimensions.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
7 months agospice: remove the single monitor config logic
Marc-André Lureau [Sun, 27 Sep 2020 14:57:49 +0000 (18:57 +0400)] 
spice: remove the single monitor config logic

Introduced in commit 9c956e646178fee8c14ce7dfae5a9d7cb901876c ("spice:
prepare for upcoming spice-server change"), the new logic never
materialized in the spice server source tree. Let's remove it for now,
until it actually changes in Spice.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-5-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
7 months agoui: add getter for UIInfo
Marc-André Lureau [Sun, 27 Sep 2020 14:57:48 +0000 (18:57 +0400)] 
ui: add getter for UIInfo

The following patch is going to introduce extra fields / details to
UIInfo. Add a getter and keep the current values, instead of memset(0)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
7 months agoedid: use physical dimensions if available
Marc-André Lureau [Sun, 27 Sep 2020 14:57:47 +0000 (18:57 +0400)] 
edid: use physical dimensions if available

Replace dpi with width_mm/height_mm in qemu_edid_info.

Use it when set (non-zero) to compute the DPI and generate the EDID.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
7 months agoedid: fix physical display size computation
Marc-André Lureau [Sun, 27 Sep 2020 14:57:46 +0000 (18:57 +0400)] 
edid: fix physical display size computation

Divide the resolution by the DPI, and multiply to mm.

Note the computation done for edid[21/22] is correct (in cm).

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
7 months agovirtio-gpu-3d: fix abnormal display after a warm reboot
Guoqing Zhang [Fri, 18 Sep 2020 11:16:32 +0000 (19:16 +0800)] 
virtio-gpu-3d: fix abnormal display after a warm reboot

When resetting virtio-gpu, virgl_renderer_reset() should be
called to ensure that the virglrenderer status is correct.

Signed-off-by: Guoqing Zhang <zhangguoqing.kernel@bytedance.com>
Reviewed-by: Qi Liu<liuqi.16@bytedance.com>
Message-id: 20200918111632.37354-1-zhangguoqing.kernel@bytedance.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
7 months agolibvhost-user: return on error in vu_log_queue_fill()
Stefan Hajnoczi [Mon, 21 Sep 2020 11:34:20 +0000 (12:34 +0100)] 
libvhost-user: return on error in vu_log_queue_fill()

vu_panic() is not guaranteed to exit the program. Return early when
errors are encountered.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200921113420.154378-3-stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agolibvhost-user: return early on virtqueue errors
Stefan Hajnoczi [Mon, 21 Sep 2020 11:34:19 +0000 (12:34 +0100)] 
libvhost-user: return early on virtqueue errors

vu_panic() is not guaranteed to exit the program. Return early when
errors are encountered.

Note that libvhost-user does not have an "unmap" operation for mapped
descriptors. Therefore it is correct to return without explicit cleanup.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200921113420.154378-2-stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agohw: virtio-pmem: detach the element fromt the virtqueue when error occurs
Li Qiang [Thu, 13 Aug 2020 16:51:25 +0000 (09:51 -0700)] 
hw: virtio-pmem: detach the element fromt the virtqueue when error occurs

If error occurs while processing the virtio request we should call
'virtqueue_detach_element' to detach the element from the virtqueue
before free the elem.

Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200813165125.59928-1-liq3ea@163.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 5f503cd9f3 ("virtio-pmem: add virtio device")
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
7 months agotests/acpi: update golden master DSDT binary table blobs for q35
Ani Sinha [Fri, 18 Sep 2020 08:41:09 +0000 (14:11 +0530)] 
tests/acpi: update golden master DSDT binary table blobs for q35

In the previously applied commit ("piix4: don't reserve hw resources when
hotplug is off globally"), we make changes to the ACPI DSDT tables
such that some ACPI code are not generated when bsel is absent. Since
as of this point in time, in q35 machines, we do not use bsel for pci
buses, we need to update the DSDT table blobs.
This patch updates the DSDT golden master tables for q35 machines.
At the same time, we clear bios-tables-test-allowed-diff.h for future
changes which update tables.

Following is a typical diff between the q35 acpi DSDT table blobs:

@@ -1,30 +1,30 @@
 /*
  * Intel ACPI Component Architecture
  * AML/ASL+ Disassembler version 20180105 (64-bit version)
  * Copyright (c) 2000 - 2018 Intel Corporation
  *
  * Disassembling to symbolic ASL+ operators
  *
- * Disassembly of tests/data/acpi/q35/DSDT, Tue Sep 15 18:52:47 2020
+ * Disassembly of /tmp/aml-3O0DR0, Tue Sep 15 18:52:47 2020
  *
  * Original Table Header:
  *     Signature        "DSDT"
- *     Length           0x00001DFE (7678)
+ *     Length           0x00001DF6 (7670)
  *     Revision         0x01 **** 32-bit table (V1), no 64-bit math support
- *     Checksum         0xAC
+ *     Checksum         0x17
  *     OEM ID           "BOCHS "
  *     OEM Table ID     "BXPCDSDT"
  *     OEM Revision     0x00000001 (1)
  *     Compiler ID      "BXPC"
  *     Compiler Version 0x00000001 (1)
  */
 DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
 {
     Scope (\)
     {
         OperationRegion (DBG, SystemIO, 0x0402, One)
         Field (DBG, ByteAcc, NoLock, Preserve)
         {
             DBGB,   8
         }

@@ -3113,24 +3113,20 @@
                 Name (_ADR, 0x00010000)  // _ADR: Address
                 Method (_S1D, 0, NotSerialized)  // _S1D: S1 Device State
                 {
                     Return (Zero)
                 }

                 Method (_S2D, 0, NotSerialized)  // _S2D: S2 Device State
                 {
                     Return (Zero)
                 }

                 Method (_S3D, 0, NotSerialized)  // _S3D: S3 Device State
                 {
                     Return (Zero)
                 }
             }
-
-            Method (PCNT, 0, NotSerialized)
-            {
-            }
         }
     }
 }

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-12-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agopiix4: don't reserve hw resources when hotplug is off globally
Ani Sinha [Fri, 18 Sep 2020 08:41:08 +0000 (14:11 +0530)] 
piix4: don't reserve hw resources when hotplug is off globally

When acpi hotplug is turned off for both root pci bus as well as for pci
bridges, we should not generate the related ACPI code for DSDT table or
initialize related hw ports or reserve hw resources. This change makes
sure all those operations are turned off in the case ACPI pci hotplug is
off globally.

In this change, we also make sure ACPI code for the PCNT method are only
added when bsel is enabled for the corresponding pci bus or bridge hotplug
is turned on.

As q35 machines do not use bsel for it's pci buses at this point in time, this
change affects DSDT acpi table for q35 machines as well. Therefore, we will
also need to commit the updated golden master DSDT table acpi binary blobs as
well. Following is the list of blobs which needs updating:

 tests/data/acpi/q35/DSDT
 tests/data/acpi/q35/DSDT.acpihmat
 tests/data/acpi/q35/DSDT.bridge
 tests/data/acpi/q35/DSDT.cphp
 tests/data/acpi/q35/DSDT.dimmpxm
 tests/data/acpi/q35/DSDT.ipmibt
 tests/data/acpi/q35/DSDT.memhp
 tests/data/acpi/q35/DSDT.mmio64
 tests/data/acpi/q35/DSDT.numamem
 tests/data/acpi/q35/DSDT.tis

These tables are updated in the following commit. Without the updated table
blobs, the unit tests would fail with this patch.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-11-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agoAdd ACPI DSDT tables for q35 that are being updated by the next patch
Ani Sinha [Fri, 18 Sep 2020 08:41:07 +0000 (14:11 +0530)] 
Add ACPI DSDT tables for q35 that are being updated by the next patch

The following patch ("piix4: don't reserve hw resources when
hotplug is off globally") modifies certain ACPI tables for q35 machines.
This patch adds those table names to tests/qtest/bios-tables-test-allowed-diff.h
so that unit tests continue to pass and bisection is not broken.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-10-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agotests/acpi: add newly added acpi DSDT table blob for pci bridge hotplug flag
Ani Sinha [Fri, 18 Sep 2020 08:41:06 +0000 (14:11 +0530)] 
tests/acpi: add newly added acpi DSDT table blob for pci bridge hotplug flag

This patch adds a binary blob corresponding to the DSDT acpi table. It is used
to unit test the flag 'acpi-pci-hotplug-with-bridge-support' used with pci
bridges.

This change also clears the file tests/qtest/bios-tables-test-allowed-diff.h
so that future changes which affect the table can be caught.

The following is the diff between files tests/data/acpi/pc/DSDT.bridge and
tests/data/acpi/pc/DSDT.hpbridge after disassembly :

@@ -1,30 +1,30 @@
 /*
  * Intel ACPI Component Architecture
  * AML/ASL+ Disassembler version 20180105 (64-bit version)
  * Copyright (c) 2000 - 2018 Intel Corporation
  *
  * Disassembling to symbolic ASL+ operators
  *
- * Disassembly of tests/data/acpi/pc/DSDT.bridge, Fri Sep 11 23:21:34 2020
+ * Disassembly of /tmp/aml-7UURQ0, Fri Sep 11 23:21:34 2020
  *
  * Original Table Header:
  *     Signature        "DSDT"
- *     Length           0x00001A89 (6793)
+ *     Length           0x0000131F (4895)
  *     Revision         0x01 **** 32-bit table (V1), no 64-bit math support
- *     Checksum         0x09
+ *     Checksum         0xF9
  *     OEM ID           "BOCHS "
  *     OEM Table ID     "BXPCDSDT"
  *     OEM Revision     0x00000001 (1)
  *     Compiler ID      "BXPC"
  *     Compiler Version 0x00000001 (1)
  */
 DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
 {
     Scope (\)
     {
         OperationRegion (DBG, SystemIO, 0x0402, One)
         Field (DBG, ByteAcc, NoLock, Preserve)
         {
             DBGB,   8
         }

@@ -859,522 +859,32 @@
                 }

                 Method (_S2D, 0, NotSerialized)  // _S2D: S2 Device State
                 {
                     Return (Zero)
                 }

                 Method (_S3D, 0, NotSerialized)  // _S3D: S3 Device State
                 {
                     Return (Zero)
                 }
             }

             Device (S18)
             {
                 Name (_ADR, 0x00030000)  // _ADR: Address
-                Name (BSEL, One)
-                Device (S00)
-                {
-                    Name (_SUN, Zero)  // _SUN: Slot User Number
-                    Name (_ADR, Zero)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S08)
-                {
-                    Name (_SUN, One)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00010000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S10)
-                {
-                    Name (_SUN, 0x02)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00020000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S18)
-                {
-                    Name (_SUN, 0x03)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00030000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S20)
-                {
-                    Name (_SUN, 0x04)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00040000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S28)
-                {
-                    Name (_SUN, 0x05)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00050000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S30)
-                {
-                    Name (_SUN, 0x06)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00060000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S38)
-                {
-                    Name (_SUN, 0x07)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00070000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S40)
-                {
-                    Name (_SUN, 0x08)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00080000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S48)
-                {
-                    Name (_SUN, 0x09)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00090000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S50)
-                {
-                    Name (_SUN, 0x0A)  // _SUN: Slot User Number
-                    Name (_ADR, 0x000A0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S58)
-                {
-                    Name (_SUN, 0x0B)  // _SUN: Slot User Number
-                    Name (_ADR, 0x000B0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S60)
-                {
-                    Name (_SUN, 0x0C)  // _SUN: Slot User Number
-                    Name (_ADR, 0x000C0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S68)
-                {
-                    Name (_SUN, 0x0D)  // _SUN: Slot User Number
-                    Name (_ADR, 0x000D0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S70)
-                {
-                    Name (_SUN, 0x0E)  // _SUN: Slot User Number
-                    Name (_ADR, 0x000E0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S78)
-                {
-                    Name (_SUN, 0x0F)  // _SUN: Slot User Number
-                    Name (_ADR, 0x000F0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S80)
-                {
-                    Name (_SUN, 0x10)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00100000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S88)
-                {
-                    Name (_SUN, 0x11)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00110000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S90)
-                {
-                    Name (_SUN, 0x12)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00120000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S98)
-                {
-                    Name (_SUN, 0x13)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00130000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SA0)
-                {
-                    Name (_SUN, 0x14)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00140000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SA8)
-                {
-                    Name (_SUN, 0x15)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00150000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SB0)
-                {
-                    Name (_SUN, 0x16)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00160000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SB8)
-                {
-                    Name (_SUN, 0x17)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00170000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SC0)
-                {
-                    Name (_SUN, 0x18)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00180000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SC8)
-                {
-                    Name (_SUN, 0x19)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00190000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SD0)
-                {
-                    Name (_SUN, 0x1A)  // _SUN: Slot User Number
-                    Name (_ADR, 0x001A0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SD8)
-                {
-                    Name (_SUN, 0x1B)  // _SUN: Slot User Number
-                    Name (_ADR, 0x001B0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SE0)
-                {
-                    Name (_SUN, 0x1C)  // _SUN: Slot User Number
-                    Name (_ADR, 0x001C0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SE8)
-                {
-                    Name (_SUN, 0x1D)  // _SUN: Slot User Number
-                    Name (_ADR, 0x001D0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SF0)
-                {
-                    Name (_SUN, 0x1E)  // _SUN: Slot User Number
-                    Name (_ADR, 0x001E0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SF8)
-                {
-                    Name (_SUN, 0x1F)  // _SUN: Slot User Number
-                    Name (_ADR, 0x001F0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Method (DVNT, 2, NotSerialized)
-                {
-                    If ((Arg0 & One))
-                    {
-                        Notify (S00, Arg1)
-                    }
-
-                    If ((Arg0 & 0x02))
-                    {
-                        Notify (S08, Arg1)
-                    }
-
-                    If ((Arg0 & 0x04))
-                    {
-                        Notify (S10, Arg1)
-                    }
-
-                    If ((Arg0 & 0x08))
-                    {
-                        Notify (S18, Arg1)
-                    }
-
-                    If ((Arg0 & 0x10))
-                    {
-                        Notify (S20, Arg1)
-                    }
-
-                    If ((Arg0 & 0x20))
-                    {
-                        Notify (S28, Arg1)
-                    }
-
-                    If ((Arg0 & 0x40))
-                    {
-                        Notify (S30, Arg1)
-                    }
-
-                    If ((Arg0 & 0x80))
-                    {
-                        Notify (S38, Arg1)
-                    }
-
-                    If ((Arg0 & 0x0100))
-                    {
-                        Notify (S40, Arg1)
-                    }
-
-                    If ((Arg0 & 0x0200))
-                    {
-                        Notify (S48, Arg1)
-                    }
-
-                    If ((Arg0 & 0x0400))
-                    {
-                        Notify (S50, Arg1)
-                    }
-
-                    If ((Arg0 & 0x0800))
-                    {
-                        Notify (S58, Arg1)
-                    }
-
-                    If ((Arg0 & 0x1000))
-                    {
-                        Notify (S60, Arg1)
-                    }
-
-                    If ((Arg0 & 0x2000))
-                    {
-                        Notify (S68, Arg1)
-                    }
-
-                    If ((Arg0 & 0x4000))
-                    {
-                        Notify (S70, Arg1)
-                    }
-
-                    If ((Arg0 & 0x8000))
-                    {
-                        Notify (S78, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00010000))
-                    {
-                        Notify (S80, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00020000))
-                    {
-                        Notify (S88, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00040000))
-                    {
-                        Notify (S90, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00080000))
-                    {
-                        Notify (S98, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00100000))
-                    {
-                        Notify (SA0, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00200000))
-                    {
-                        Notify (SA8, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00400000))
-                    {
-                        Notify (SB0, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00800000))
-                    {
-                        Notify (SB8, Arg1)
-                    }
-
-                    If ((Arg0 & 0x01000000))
-                    {
-                        Notify (SC0, Arg1)
-                    }
-
-                    If ((Arg0 & 0x02000000))
-                    {
-                        Notify (SC8, Arg1)
-                    }
-
-                    If ((Arg0 & 0x04000000))
-                    {
-                        Notify (SD0, Arg1)
-                    }
-
-                    If ((Arg0 & 0x08000000))
-                    {
-                        Notify (SD8, Arg1)
-                    }
-
-                    If ((Arg0 & 0x10000000))
-                    {
-                        Notify (SE0, Arg1)
-                    }
-
-                    If ((Arg0 & 0x20000000))
-                    {
-                        Notify (SE8, Arg1)
-                    }
-
-                    If ((Arg0 & 0x40000000))
-                    {
-                        Notify (SF0, Arg1)
-                    }
-
-                    If ((Arg0 & 0x80000000))
-                    {
-                        Notify (SF8, Arg1)
-                    }
-                }
-
-                Method (PCNT, 0, NotSerialized)
-                {
-                    BNUM = One
-                    DVNT (PCIU, One)
-                    DVNT (PCID, 0x03)
-                }
             }

             Device (S20)
             {
                 Name (_SUN, 0x04)  // _SUN: Slot User Number
                 Name (_ADR, 0x00040000)  // _ADR: Address
                 Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
                 {
                     PCEJ (BSEL, _SUN)
                 }
             }

             Device (S28)
             {
                 Name (_SUN, 0x05)  // _SUN: Slot User Number
                 Name (_ADR, 0x00050000)  // _ADR: Address
@@ -1779,22 +1289,21 @@
                 If ((Arg0 & 0x40000000))
                 {
                     Notify (SF0, Arg1)
                 }

                 If ((Arg0 & 0x80000000))
                 {
                     Notify (SF8, Arg1)
                 }
             }

             Method (PCNT, 0, NotSerialized)
             {
                 BNUM = Zero
                 DVNT (PCIU, One)
                 DVNT (PCID, 0x03)
-                ^S18.PCNT ()
             }
         }
     }
 }

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-9-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agotests/acpi: unit test for 'acpi-pci-hotplug-with-bridge-support' bridge flag
Ani Sinha [Fri, 18 Sep 2020 08:41:05 +0000 (14:11 +0530)] 
tests/acpi: unit test for 'acpi-pci-hotplug-with-bridge-support' bridge flag

This change adds a new unit test for the global flag
'acpi-pci-hotplug-with-bridge-support' which is available for cold plugged pci
bridges in i440fx. The flag can be used to turn off ACPI based hotplug support
on all pci bridges.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-8-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agotests/acpi: list added acpi table binary file for pci bridge hotplug test
Ani Sinha [Fri, 18 Sep 2020 08:41:04 +0000 (14:11 +0530)] 
tests/acpi: list added acpi table binary file for pci bridge hotplug test

The file 'tests/data/acpi/pc/DSDT.hpbridge' is a newly added acpi table file
for testing the pci bridge option 'acpi-pci-hotplug-with-bridge-support' under
i440fx. This change documents this fact.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-7-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agoi440fx/acpi: do not add hotplug related amls for cold plugged bridges
Ani Sinha [Fri, 18 Sep 2020 08:41:03 +0000 (14:11 +0530)] 
i440fx/acpi: do not add hotplug related amls for cold plugged bridges

Cold plugged bridges are not hot unpluggable, even when their hotplug
property (acpi-pci-hotplug-with-bridge-support) is turned off. Please see
the function acpi_pcihp_pc_no_hotplug(). However, with
the current implementaton, Windows would try to hot-unplug a pci bridge when
it's hotplug switch is off. This is regardless of whether there are devices
attached to the bridge. This is because we add ACPI code like _EJ0 etc for the
pci slot where the bridge is cold plugged.

In this fix, we identify a cold plugged bridge and for cold plugged bridges,
we do not add the appropriate ACPI methods that are used by the OS
to identify a hot-pluggable/unpluggable pci device. After this change, Windows
does not detect the cold plugged pci bridge as ejectable.

As a result of the patch, the following are the changes to the DSDT ACPI
table:

@@ -858,38 +858,33 @@
                     Return (Zero)
                 }

                 Method (_S2D, 0, NotSerialized)  // _S2D: S2 Device State
                 {
                     Return (Zero)
                 }

                 Method (_S3D, 0, NotSerialized)  // _S3D: S3 Device State
                 {
                     Return (Zero)
                 }
             }

             Device (S18)
             {
-                Name (_SUN, 0x03)  // _SUN: Slot User Number
                 Name (_ADR, 0x00030000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
             }

             Device (S20)
             {
                 Name (_SUN, 0x04)  // _SUN: Slot User Number
                 Name (_ADR, 0x00040000)  // _ADR: Address
                 Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
                 {
                     PCEJ (BSEL, _SUN)
                 }
             }

             Device (S28)
             {
                 Name (_SUN, 0x05)  // _SUN: Slot User Number
                 Name (_ADR, 0x00050000)  // _ADR: Address
@@ -1148,37 +1143,32 @@
                     PCEJ (BSEL, _SUN)
                 }
             }

             Device (SF8)
             {
                 Name (_SUN, 0x1F)  // _SUN: Slot User Number
                 Name (_ADR, 0x001F0000)  // _ADR: Address
                 Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
                 {
                     PCEJ (BSEL, _SUN)
                 }
             }

             Method (DVNT, 2, NotSerialized)
             {
-                If ((Arg0 & 0x08))
-                {
-                    Notify (S18, Arg1)
-                }
-
                 If ((Arg0 & 0x10))
                 {
                     Notify (S20, Arg1)
                 }

                 If ((Arg0 & 0x20))
                 {
                     Notify (S28, Arg1)
                 }

                 If ((Arg0 & 0x40))
                 {
                     Notify (S30, Arg1)
                 }

                 If ((Arg0 & 0x80))

While at it, I have also updated a stale comment.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Suggested-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-6-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agoFix a gap where acpi_pcihp_find_hotplug_bus() returns a non-hotpluggable bus
Ani Sinha [Fri, 18 Sep 2020 08:41:02 +0000 (14:11 +0530)] 
Fix a gap where acpi_pcihp_find_hotplug_bus() returns a non-hotpluggable bus

When ACPI hotplug for the root bus is disabled, the bsel property for that
bus is not set. Please see the following commit:

3d7e78aa7777f ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus").

As a result, when acpi_pcihp_find_hotplug_bus() is called
with bsel set to 0, it may return the root bus. This can cause devices
attached to the root bus to get hot-unplugged if the user issues the following
set of commmands:

outl 0xae10 0
outl 0xae08 your_slot

Thanks to Julia for pointing this out here:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg734548.html

In this patch, we fix the issue in this function by checking if the bus which
is returned by the function is actually hotpluggable. If not, we simply return
NULL. This avoids the scenario where we were returning a non-hotpluggable bus.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-5-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agotests/acpi: add a new ACPI table in order to test root pci hotplug on/off
Ani Sinha [Fri, 18 Sep 2020 08:41:01 +0000 (14:11 +0530)] 
tests/acpi: add a new ACPI table in order to test root pci hotplug on/off

A new binary ACPI table tests/data/acpi/pc/DSDT.roothp is added in order
to unit test hotplug on/off capability on the root pci bus for i440fx.
The diff between the table DSDT.bridge and DSDT.roothp is listed below:

@@ -1,30 +1,30 @@
 /*
  * Intel ACPI Component Architecture
  * AML/ASL+ Disassembler version 20180105 (64-bit version)
  * Copyright (c) 2000 - 2018 Intel Corporation
  *
  * Disassembling to symbolic ASL+ operators
  *
- * Disassembly of tests/data/acpi/pc/DSDT.bridge, Fri Sep 11 22:51:04 2020
+ * Disassembly of /tmp/aml-UGIHQ0, Fri Sep 11 22:51:04 2020
  *
  * Original Table Header:
  *     Signature        "DSDT"
- *     Length           0x00001A89 (6793)
+ *     Length           0x0000140A (5130)
  *     Revision         0x01 **** 32-bit table (V1), no 64-bit math support
- *     Checksum         0x09
+ *     Checksum         0xE6
  *     OEM ID           "BOCHS "
  *     OEM Table ID     "BXPCDSDT"
  *     OEM Revision     0x00000001 (1)
  *     Compiler ID      "BXPC"
  *     Compiler Version 0x00000001 (1)
  */
 DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
 {
     Scope (\)
     {
         OperationRegion (DBG, SystemIO, 0x0402, One)
         Field (DBG, ByteAcc, NoLock, Preserve)
         {
             DBGB,   8
         }

@@ -831,61 +831,60 @@
             Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
             {
                 IO (Decode16,
                     0x0510,             // Range Minimum
                     0x0510,             // Range Maximum
                     0x01,               // Alignment
                     0x0C,               // Length
                     )
             })
         }
     }

     Scope (\_SB)
     {
         Scope (PCI0)
         {
-            Name (BSEL, Zero)
             Device (S00)
             {
                 Name (_ADR, Zero)  // _ADR: Address
             }

             Device (S10)
             {
                 Name (_ADR, 0x00020000)  // _ADR: Address
                 Method (_S1D, 0, NotSerialized)  // _S1D: S1 Device State
                 {
                     Return (Zero)
                 }

                 Method (_S2D, 0, NotSerialized)  // _S2D: S2 Device State
                 {
                     Return (Zero)
                 }

                 Method (_S3D, 0, NotSerialized)  // _S3D: S3 Device State
                 {
                     Return (Zero)
                 }
             }

             Device (S18)
             {
                 Name (_ADR, 0x00030000)  // _ADR: Address
-                Name (BSEL, One)
+                Name (BSEL, Zero)
                 Device (S00)
                 {
                     Name (_SUN, Zero)  // _SUN: Slot User Number
                     Name (_ADR, Zero)  // _ADR: Address
                     Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
                     {
                         PCEJ (BSEL, _SUN)
                     }
                 }

                 Device (S08)
                 {
                     Name (_SUN, One)  // _SUN: Slot User Number
                     Name (_ADR, 0x00010000)  // _ADR: Address
                     Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
                     {
@@ -1345,456 +1344,30 @@
                         Notify (SE8, Arg1)
                     }

                     If ((Arg0 & 0x40000000))
                     {
                         Notify (SF0, Arg1)
                     }

                     If ((Arg0 & 0x80000000))
                     {
                         Notify (SF8, Arg1)
                     }
                 }

                 Method (PCNT, 0, NotSerialized)
                 {
-                    BNUM = One
+                    BNUM = Zero
                     DVNT (PCIU, One)
                     DVNT (PCID, 0x03)
                 }
             }

-            Device (S20)
-            {
-                Name (_SUN, 0x04)  // _SUN: Slot User Number
-                Name (_ADR, 0x00040000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S28)
-            {
-                Name (_SUN, 0x05)  // _SUN: Slot User Number
-                Name (_ADR, 0x00050000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S30)
-            {
-                Name (_SUN, 0x06)  // _SUN: Slot User Number
-                Name (_ADR, 0x00060000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S38)
-            {
-                Name (_SUN, 0x07)  // _SUN: Slot User Number
-                Name (_ADR, 0x00070000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S40)
-            {
-                Name (_SUN, 0x08)  // _SUN: Slot User Number
-                Name (_ADR, 0x00080000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S48)
-            {
-                Name (_SUN, 0x09)  // _SUN: Slot User Number
-                Name (_ADR, 0x00090000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S50)
-            {
-                Name (_SUN, 0x0A)  // _SUN: Slot User Number
-                Name (_ADR, 0x000A0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S58)
-            {
-                Name (_SUN, 0x0B)  // _SUN: Slot User Number
-                Name (_ADR, 0x000B0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S60)
-            {
-                Name (_SUN, 0x0C)  // _SUN: Slot User Number
-                Name (_ADR, 0x000C0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S68)
-            {
-                Name (_SUN, 0x0D)  // _SUN: Slot User Number
-                Name (_ADR, 0x000D0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S70)
-            {
-                Name (_SUN, 0x0E)  // _SUN: Slot User Number
-                Name (_ADR, 0x000E0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S78)
-            {
-                Name (_SUN, 0x0F)  // _SUN: Slot User Number
-                Name (_ADR, 0x000F0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S80)
-            {
-                Name (_SUN, 0x10)  // _SUN: Slot User Number
-                Name (_ADR, 0x00100000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S88)
-            {
-                Name (_SUN, 0x11)  // _SUN: Slot User Number
-                Name (_ADR, 0x00110000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S90)
-            {
-                Name (_SUN, 0x12)  // _SUN: Slot User Number
-                Name (_ADR, 0x00120000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S98)
-            {
-                Name (_SUN, 0x13)  // _SUN: Slot User Number
-                Name (_ADR, 0x00130000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SA0)
-            {
-                Name (_SUN, 0x14)  // _SUN: Slot User Number
-                Name (_ADR, 0x00140000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SA8)
-            {
-                Name (_SUN, 0x15)  // _SUN: Slot User Number
-                Name (_ADR, 0x00150000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SB0)
-            {
-                Name (_SUN, 0x16)  // _SUN: Slot User Number
-                Name (_ADR, 0x00160000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SB8)
-            {
-                Name (_SUN, 0x17)  // _SUN: Slot User Number
-                Name (_ADR, 0x00170000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SC0)
-            {
-                Name (_SUN, 0x18)  // _SUN: Slot User Number
-                Name (_ADR, 0x00180000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SC8)
-            {
-                Name (_SUN, 0x19)  // _SUN: Slot User Number
-                Name (_ADR, 0x00190000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SD0)
-            {
-                Name (_SUN, 0x1A)  // _SUN: Slot User Number
-                Name (_ADR, 0x001A0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SD8)
-            {
-                Name (_SUN, 0x1B)  // _SUN: Slot User Number
-                Name (_ADR, 0x001B0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SE0)
-            {
-                Name (_SUN, 0x1C)  // _SUN: Slot User Number
-                Name (_ADR, 0x001C0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SE8)
-            {
-                Name (_SUN, 0x1D)  // _SUN: Slot User Number
-                Name (_ADR, 0x001D0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SF0)
-            {
-                Name (_SUN, 0x1E)  // _SUN: Slot User Number
-                Name (_ADR, 0x001E0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SF8)
-            {
-                Name (_SUN, 0x1F)  // _SUN: Slot User Number
-                Name (_ADR, 0x001F0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Method (DVNT, 2, NotSerialized)
-            {
-                If ((Arg0 & 0x10))
-                {
-                    Notify (S20, Arg1)
-                }
-
-                If ((Arg0 & 0x20))
-                {
-                    Notify (S28, Arg1)
-                }
-
-                If ((Arg0 & 0x40))
-                {
-                    Notify (S30, Arg1)
-                }
-
-                If ((Arg0 & 0x80))
-                {
-                    Notify (S38, Arg1)
-                }
-
-                If ((Arg0 & 0x0100))
-                {
-                    Notify (S40, Arg1)
-                }
-
-                If ((Arg0 & 0x0200))
-                {
-                    Notify (S48, Arg1)
-                }
-
-                If ((Arg0 & 0x0400))
-                {
-                    Notify (S50, Arg1)
-                }
-
-                If ((Arg0 & 0x0800))
-                {
-                    Notify (S58, Arg1)
-                }
-
-                If ((Arg0 & 0x1000))
-                {
-                    Notify (S60, Arg1)
-                }
-
-                If ((Arg0 & 0x2000))
-                {
-                    Notify (S68, Arg1)
-                }
-
-                If ((Arg0 & 0x4000))
-                {
-                    Notify (S70, Arg1)
-                }
-
-                If ((Arg0 & 0x8000))
-                {
-                    Notify (S78, Arg1)
-                }
-
-                If ((Arg0 & 0x00010000))
-                {
-                    Notify (S80, Arg1)
-                }
-
-                If ((Arg0 & 0x00020000))
-                {
-                    Notify (S88, Arg1)
-                }
-
-                If ((Arg0 & 0x00040000))
-                {
-                    Notify (S90, Arg1)
-                }
-
-                If ((Arg0 & 0x00080000))
-                {
-                    Notify (S98, Arg1)
-                }
-
-                If ((Arg0 & 0x00100000))
-                {
-                    Notify (SA0, Arg1)
-                }
-
-                If ((Arg0 & 0x00200000))
-                {
-                    Notify (SA8, Arg1)
-                }
-
-                If ((Arg0 & 0x00400000))
-                {
-                    Notify (SB0, Arg1)
-                }
-
-                If ((Arg0 & 0x00800000))
-                {
-                    Notify (SB8, Arg1)
-                }
-
-                If ((Arg0 & 0x01000000))
-                {
-                    Notify (SC0, Arg1)
-                }
-
-                If ((Arg0 & 0x02000000))
-                {
-                    Notify (SC8, Arg1)
-                }
-
-                If ((Arg0 & 0x04000000))
-                {
-                    Notify (SD0, Arg1)
-                }
-
-                If ((Arg0 & 0x08000000))
-                {
-                    Notify (SD8, Arg1)
-                }
-
-                If ((Arg0 & 0x10000000))
-                {
-                    Notify (SE0, Arg1)
-                }
-
-                If ((Arg0 & 0x20000000))
-                {
-                    Notify (SE8, Arg1)
-                }
-
-                If ((Arg0 & 0x40000000))
-                {
-                    Notify (SF0, Arg1)
-                }
-
-                If ((Arg0 & 0x80000000))
-                {
-                    Notify (SF8, Arg1)
-                }
-            }
-
             Method (PCNT, 0, NotSerialized)
             {
-                BNUM = Zero
-                DVNT (PCIU, One)
-                DVNT (PCID, 0x03)
                 ^S18.PCNT ()
             }
         }
     }
 }

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-4-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agotests/acpi: add new unit test to test hotplug off/on feature on the root pci bus
Ani Sinha [Fri, 18 Sep 2020 08:41:00 +0000 (14:11 +0530)] 
tests/acpi: add new unit test to test hotplug off/on feature on the root pci bus

Ability to turn hotplug off on the pci root bus for i440fx was added in commit:
3d7e78aa7777f0 ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus")

This change adds a unit test in order to test this feature.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agotests/acpi: mark addition of table DSDT.roothp for unit testing root pci hotplug
Ani Sinha [Fri, 18 Sep 2020 08:40:59 +0000 (14:10 +0530)] 
tests/acpi: mark addition of table DSDT.roothp for unit testing root pci hotplug

A new binary acpi table tests/data/acpi/pc/DSDT.roothp is added in order to
unit test the feature flag that can disable/enable root pci bus hotplug on
i440fx. This feature was added with the commit:
3d7e78aa7777f0 ("Introduce a new flag for i440fx to disable PCI hotplug on
the root bus")

This change documents the fact that this new file addition was made as a part
of the unit test change.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovhost-user: save features of multiqueues if chardev is closed
haibinzhang(张海斌) [Tue, 22 Sep 2020 03:27:54 +0000 (03:27 +0000)] 
vhost-user: save features of multiqueues if chardev is closed

Fore-commit(c6beefd674) only saves features of queue0,
this makes wrong features of other queues in multiqueues
situation.
For examples:
  qemu-system-aarch64 ... \
  -chardev socket,id=charnet0,path=/var/run/vhost_sock \
  -netdev vhost-user,chardev=charnet0,queues=2,id=hostnet0 \
  ...
There are two queues in nic assocated with one chardev.
When chardev is reconnected, it is necessary to save and
restore features of all queues.

Signed-of-by: Haibin Zhang <haibinzhang@tencent.com>
Message-Id: <46CBC206-E0CA-4249-81CD-10F75DA30441@tencent.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agoqemu-options: document SMBIOS type 11 settings
Daniel P. Berrangé [Wed, 23 Sep 2020 13:38:04 +0000 (14:38 +0100)] 
qemu-options: document SMBIOS type 11 settings

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-4-berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agohw/smbios: report error if table size is too large
Daniel P. Berrangé [Wed, 23 Sep 2020 13:38:03 +0000 (14:38 +0100)] 
hw/smbios: report error if table size is too large

The SMBIOS 2.1 entry point uses a uint16 data type for reporting the
total length of the tables. If the user passes -smbios configuration to
QEMU that causes the table size to exceed this limit then various bad
behaviours result, including

 - firmware hangs in an infinite loop
 - firmware triggers a KVM crash on bad memory access
 - firmware silently discards user's SMBIOS data replacing it with
   a generic data set.

Limiting the size to 0xffff in QEMU avoids triggering most of these
problems. There is a remaining bug in SeaBIOS which tries to prepend its
own data for table 0, and does not check whether there is sufficient
space before attempting this.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-3-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agohw/smbios: support loading OEM strings values from a file
Daniel P. Berrangé [Wed, 23 Sep 2020 13:38:02 +0000 (14:38 +0100)] 
hw/smbios: support loading OEM strings values from a file

Some applications want to pass quite large values for the OEM strings
entries. Rather than having huge strings on the command line, it would
be better to load them from a file, as supported with -fw_cfg.

This introduces the "path" parameter allowing for:

  $ echo -n "thisthing" > mydata.txt
  $ qemu-system-x86_64 \
    -smbios type=11,value=something \
    -smbios type=11,path=mydata.txt \
    -smbios type=11,value=somemore \
    ...other args...

Now in the guest

$ dmidecode -t 11
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.

Handle 0x0E00, DMI type 11, 5 bytes
OEM Strings
String 1: something
String 2: thisthing
String 3: somemore

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-2-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agotests: acpi: update acpi blobs with new AML
Igor Mammedov [Wed, 23 Sep 2020 09:46:49 +0000 (05:46 -0400)] 
tests: acpi: update acpi blobs with new AML

here is diff against tests/data/acpi/q35/DSDT
for currently shipped ovmf binary.
(once firmware blob is updated, it will negotiate CPU hotplug
feature which will ad extra hunk sending SMI and Q35 tests will
need to be updated), but otherwise diff shows new CPU hotplug
AML that is shared between q35 and pc machines.

             Method (CSCN, 0, Serialized)
             {
                 Acquire (\_SB.PCI0.PRES.CPLK, 0xFFFF)
-                Local0 = One
-                While ((Local0 == One))
-                {
-                    Local0 = Zero
-                    \_SB.PCI0.PRES.CCMD = Zero
-                    If ((\_SB.PCI0.PRES.CINS == One))
+                Name (CNEW, Package (0xFF){})
+                Local3 = Zero
+                Local4 = One
+                While ((Local4 == One))
+                {
+                    Local4 = Zero
+                    Local0 = One
+                    Local1 = Zero
+                    While (((Local0 == One) && (Local3 < One)))
                     {
-                        CTFY (\_SB.PCI0.PRES.CDAT, One)
-                        \_SB.PCI0.PRES.CINS = One
-                        Local0 = One
+                        Local0 = Zero
+                        \_SB.PCI0.PRES.CSEL = Local3
+                        \_SB.PCI0.PRES.CCMD = Zero
+                        If ((\_SB.PCI0.PRES.CDAT < Local3))
+                        {
+                            Break
+                        }
+
+                        If ((Local1 == 0xFF))
+                        {
+                            Local4 = One
+                            Break
+                        }
+
+                        Local3 = \_SB.PCI0.PRES.CDAT
+                        If ((\_SB.PCI0.PRES.CINS == One))
+                        {
+                            CNEW [Local1] = Local3
+                            Local1++
+                            Local0 = One
+                        }
+                        ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+                        {
+                            CTFY (Local3, 0x03)
+                            \_SB.PCI0.PRES.CRMV = One
+                            Local0 = One
+                        }
+
+                        Local3++
                     }
-                    ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+
+                    Local2 = Zero
+                    While ((Local2 < Local1))
                     {
-                        CTFY (\_SB.PCI0.PRES.CDAT, 0x03)
-                        \_SB.PCI0.PRES.CRMV = One
-                        Local0 = One
+                        Local3 = DerefOf (CNEW [Local2])
+                        CTFY (Local3, One)
+                        Debug = Local3
+                        \_SB.PCI0.PRES.CSEL = Local3
+                        \_SB.PCI0.PRES.CINS = One
+                        Local2++
                     }
                 }

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200923094650.1301166-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agox68: acpi: trigger SMI before sending hotplug Notify event to OSPM
Igor Mammedov [Wed, 23 Sep 2020 09:46:48 +0000 (05:46 -0400)] 
x68: acpi: trigger SMI before sending hotplug Notify event to OSPM

In case firmware has negotiated CPU hotplug SMI feature, generate
AML to describe SMI IO port region and send SMI to firmware
on each CPU hotplug SCI in case new CPUs were hotplugged.

Since new CPUs can be hotplugged while CPU_SCAN_METHOD is running
we can't send SMI before new CPUs are fetched from QEMU as it
could cause sending Notify to a CPU that firmware hasn't seen yet.
So fetch new CPUs into local cache first, then send SMI and
after that send Notify events to cached CPUs. This should ensure
that Notify is sent only to CPUs which were processed by firmware
first.
Any CPUs that were hotplugged after caching will be processed
by the next CPU_SCAN_METHOD, when pending SCI is handled.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agox86: acpi: introduce the PCI0.SMI0 ACPI device
Igor Mammedov [Wed, 23 Sep 2020 09:46:47 +0000 (05:46 -0400)] 
x86: acpi: introduce the PCI0.SMI0 ACPI device

When CPU hotplug with SMI has been negotiated, describe the SMI
register block in the DSDT. Pass the ACPI name of the SMI control
register to build_cpus_aml(), so that CPU_SCAN_METHOD can access the
register in the next patch.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agox86: acpi: introduce AcpiPmInfo::smi_on_cpuhp
Igor Mammedov [Wed, 23 Sep 2020 09:46:46 +0000 (05:46 -0400)] 
x86: acpi: introduce AcpiPmInfo::smi_on_cpuhp

Translate the "CPU hotplug with SMI" feature bit, from the property
added in the last patch, to a dedicated boolean in AcpiPmInfo.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agox86: ich9: expose "smi_negotiated_features" as a QOM property
Igor Mammedov [Wed, 23 Sep 2020 09:46:45 +0000 (05:46 -0400)] 
x86: ich9: expose "smi_negotiated_features" as a QOM property

Expose the "smi_negotiated_features" field of ICH9LPCState as
a QOM property.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agotests: acpi: mark to be changed tables in bios-tables-test-allowed-diff
Igor Mammedov [Wed, 23 Sep 2020 09:46:44 +0000 (05:46 -0400)] 
tests: acpi: mark to be changed tables in bios-tables-test-allowed-diff

... to let tests pass until binary blobs are updated with new AML

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200923094650.1301166-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agoacpi: add aml_land() and aml_break() primitives
Igor Mammedov [Wed, 23 Sep 2020 09:46:43 +0000 (05:46 -0400)] 
acpi: add aml_land() and aml_break() primitives

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agox86: cpuhp: refuse cpu hot-unplug request earlier if not supported
Igor Mammedov [Wed, 23 Sep 2020 09:46:42 +0000 (05:46 -0400)] 
x86: cpuhp: refuse cpu hot-unplug request earlier if not supported

CPU hot-unplug with SMM requires firmware participation to prevent
guest crash (i.e. CPU can be removed only after OS _and_ firmware
were prepared for the action).
Previous patches introduced ICH9_LPC_SMI_F_CPU_HOT_UNPLUG_BIT
feature bit, which is advertised by firmware when it has support
for CPU hot-unplug. Use it to check if guest is able to handle
unplug and make device_del fail gracefully if hot-unplug feature
hasn't been negotiated.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agox86: cpuhp: prevent guest crash on CPU hotplug when broadcast SMI is in use
Igor Mammedov [Wed, 23 Sep 2020 09:46:41 +0000 (05:46 -0400)] 
x86: cpuhp: prevent guest crash on CPU hotplug when broadcast SMI is in use

There were reports of guest crash on CPU hotplug, when using q35 machine
type and OVMF with SMM, due to hotplugged CPU trying to process SMI at
default SMI handler location without it being relocated by firmware first.

Fix it by refusing hotplug if firmware hasn't negotiated CPU hotplug with
SMI support while SMI broadcast is in use.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-3-imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agox86: lpc9: let firmware negotiate 'CPU hotplug with SMI' features
Igor Mammedov [Wed, 23 Sep 2020 09:46:40 +0000 (05:46 -0400)] 
x86: lpc9: let firmware negotiate 'CPU hotplug with SMI' features

It will allow firmware to notify QEMU that firmware requires SMI
being triggered on CPU hot[un]plug, so that it would be able to account
for hotplugged CPU and relocate it to new SMM base and/or safely remove
CPU on unplug.

Using negotiated features, follow up patches will insert SMI upcall
into AML code, to make sure that firmware processes hotplug before
guest OS would attempt to use new CPU.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovirtio: update MemoryRegionCaches when guest set bad features
Li Qiang [Sat, 19 Sep 2020 08:27:06 +0000 (01:27 -0700)] 
virtio: update MemoryRegionCaches when guest set bad features

Current the 'virtio_set_features' only update the 'MemorRegionCaches'
when the 'virtio_set_features_nocheck' return '0' which means it is
not bad features. However the guest can still trigger the access of the
used vring after set bad features. In this situation it will cause assert
failure in 'ADDRESS_SPACE_ST_CACHED'.

Buglink: https://bugs.launchpad.net/qemu/+bug/1890333
Fixes: db812c4073c7 ("virtio: update MemoryRegionCaches when guest negotiates features")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200919082706.6703-1-liq3ea@163.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovhost-vsock-ccw: force virtio version 1
Stefano Garzarella [Mon, 21 Sep 2020 12:25:06 +0000 (14:25 +0200)] 
vhost-vsock-ccw: force virtio version 1

virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.

This patch forces virtio version 1 as done for vhost-vsock-pci.

To avoid migration issues, we force virtio version 1 only when
legacy check is enabled in the new machine types (>= 5.1).

Cc: qemu-stable@nongnu.org
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-5-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovhost-user-vsock-pci: force virtio version 1
Stefano Garzarella [Mon, 21 Sep 2020 12:25:05 +0000 (14:25 +0200)] 
vhost-user-vsock-pci: force virtio version 1

Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on vhost-user-vsock-pci device:

    $ ./qemu-system-x86_64 ... \
    -chardev socket,id=char0,reconnect=0,path=/tmp/vhost4.socket \
    -device vhost-user-vsock-pci,chardev=char0
        qemu-system-x86_64: -device vhost-user-vsock-pci,chardev=char0:
        device is modern-only, use disable-legacy=on

virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.

This patch forces virtio version 1 and removes the 'transitional_name'
property, as done for vhost-vsock-pci, removing the need to specify
'disable-legacy=on' on vhost-user-vsock-pci device.

Cc: qemu-stable@nongnu.org
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-4-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovhost-vsock-pci: force virtio version 1
Stefano Garzarella [Mon, 21 Sep 2020 12:25:04 +0000 (14:25 +0200)] 
vhost-vsock-pci: force virtio version 1

Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on vhost-vsock-pci device:

    $ ./qemu-system-x86_64 ... -device vhost-vsock-pci,guest-cid=5
        qemu-system-x86_64: -device vhost-vsock-pci,guest-cid=5:
        device is modern-only, use disable-legacy=on

virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
In addition Cornelia verified that forcing a legacy mode on
vhost-vsock-pci device using x86-64 host and s390x guest, so with
different endianness, produces strange behaviours.

This patch forces virtio version 1 and removes the 'transitional_name'
property removing the need to specify 'disable-legacy=on' on
vhost-vsock-pci device.

To avoid migration issues, we force virtio version 1 only when
legacy check is enabled in the new machine types (>= 5.1).

As the transitional device name is not commonly used, we do not
provide compatibility handling for it.

Cc: qemu-stable@nongnu.org
Reported-by: Qian Cai <caiqian@redhat.com>
Reported-by: Qinghua Cheng <qcheng@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1868449
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-3-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovirtio: skip legacy support check on machine types less than 5.1
Stefano Garzarella [Mon, 21 Sep 2020 12:25:03 +0000 (14:25 +0200)] 
virtio: skip legacy support check on machine types less than 5.1

Commit 9b3a35ec82 ("virtio: verify that legacy support is not accidentally
on") added a check that returns an error if legacy support is on, but the
device does not support legacy.

Unfortunately some devices were wrongly declared legacy capable even if
they were not (e.g vhost-vsock).

To avoid migration issues, we add a virtio-device property
(x-disable-legacy-check) to skip the legacy error, printing a warning
instead, for machine types < 5.1.

Cc: qemu-stable@nongnu.org
Fixes: 9b3a35ec82 ("virtio: verify that legacy support is not accidentally on")
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-2-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agoconfigure: Fix build dependencies with vhost-vdpa.
Laurent Vivier [Thu, 24 Sep 2020 21:00:23 +0000 (23:00 +0200)] 
configure: Fix build dependencies with vhost-vdpa.

Following the same logic as for vhost-net-user and vhost-kernel,
enable vhost-net if vhost-net-vdpa is enabled and vhost-net is not
explicitly disabled.
See 299e6f19b3e2 ("vhost-net: revamp configure logic")

Autoselect VHOST if VHOST_VDPA is set
See 21c6b0c87e85 ("configure: simplify vhost condition with Kconfig")
See 2becc36a3e53 ("meson: infrastructure for building emulators"

Problems can be triggered using;
... --enable-vhost-vdpa --disable-vhost-user --disable-vhost-kernel ...

Fixes: 108a64818e69 ("vhost-vdpa: introduce vhost-vdpa backend")
Cc: lulu@redhat.com
Cc: pbonzini@redhat.com
Cc: marcandre.lureau@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200924210023.160679-1-lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovhost-vdpa: add trace-events
Laurent Vivier [Fri, 25 Sep 2020 09:10:55 +0000 (11:10 +0200)] 
vhost-vdpa: add trace-events

Add trace functions in vhost-vdpa.c.

All traces from this file can be enabled with '-trace vhost_vdpa*'.

Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200925091055.186023-3-lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agoutil/hexdump: introduce qemu_hexdump_line()
Laurent Vivier [Fri, 25 Sep 2020 09:10:54 +0000 (11:10 +0200)] 
util/hexdump: introduce qemu_hexdump_line()

Dumping one line of hexadecimal/ASCII from a buffer is often needed.
Move this part from qemu_hexdump() and use it

Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200925091055.186023-2-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovirtio-pmem-pci: force virtio version 1
Pankaj Gupta [Fri, 25 Sep 2020 10:22:51 +0000 (12:22 +0200)] 
virtio-pmem-pci: force virtio version 1

 Qemu fails with below error when trying to run with virtio pmem:

 (qemu) qemu-system-x86_64: -device virtio-pmem-pci,memdev=mem1,id=nv1:
  device is modern-only, use disable-legacy=on

 This patch fixes this by forcing virtio 1 with virtio-pmem.

fixes: adf0748a49 ("virtio-pci: Proxy for virtio-pmem")
Signed-off-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Message-Id: <20200925102251.7216-1-pankaj.gupta.linux@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovirtio-iommu-pci: force virtio version 1
Eric Auger [Tue, 8 Sep 2020 19:33:09 +0000 (21:33 +0200)] 
virtio-iommu-pci: force virtio version 1

Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on virtio-iommu-pci:

qemu-system-aarch64: -device virtio-iommu-pci: device is modern-only,
use disable-legacy=on

virtio-iommu was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.

This patch forces virtio version 1 and removes the 'transitional_name'
property removing the need to specify 'disable-legacy=on' on
virtio-iommu-pci device.

Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200908193309.20569-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovirtio-iommu: Check gtrees are non null before destroying them
Eric Auger [Tue, 8 Sep 2020 19:33:08 +0000 (21:33 +0200)] 
virtio-iommu: Check gtrees are non null before destroying them

If realize fails, domains and endpoints trees may be NULL. On
unrealize(), this produces assertions:

"GLib: g_tree_destroy: assertion 'tree != NULL' failed"

Check that the trees are non NULL before destroying them.

Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200908193309.20569-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agocphp: remove deprecated cpu-add command(s)
Igor Mammedov [Tue, 15 Sep 2020 12:04:03 +0000 (08:04 -0400)] 
cphp: remove deprecated cpu-add command(s)

These were deprecated since 4.0, remove both HMP and QMP variants.

Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agotests/qtest/vhost-user-test: prepare the tests for adding new dev class
Dima Stepanov [Fri, 11 Sep 2020 08:39:45 +0000 (11:39 +0300)] 
tests/qtest/vhost-user-test: prepare the tests for adding new dev class

For now only vhost-user-net device is supported by the test. Other
vhost-user devices are not tested. As a first step make source code
refactoring so new devices can reuse the same test routines. To make
this provide a new vhost_user_ops structure with the methods to
initialize device, its command line or make a proper vhost-user
responses.

Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <a48b60fb96fef230b75fff72a2d77040dcb5ef7c.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovhost: check queue state in the vhost_dev_set_log routine
Dima Stepanov [Fri, 11 Sep 2020 08:39:44 +0000 (11:39 +0300)] 
vhost: check queue state in the vhost_dev_set_log routine

If the vhost-user-blk daemon provides only one virtqueue, but device was
added with several queues, then QEMU will send more VHOST-USER command
than expected by daemon side. The vhost_virtqueue_start() routine
handles such case by checking the return value from the
virtio_queue_get_desc_addr() function call. Add the same check to the
vhost_dev_set_log() routine.

Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <6232946d5af09e9775076645909964a6539b8ab5.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovhost: recheck dev state in the vhost_migration_log routine
Dima Stepanov [Fri, 11 Sep 2020 08:39:43 +0000 (11:39 +0300)] 
vhost: recheck dev state in the vhost_migration_log routine

vhost-user devices can get a disconnect in the middle of the VHOST-USER
handshake on the migration start. If disconnect event happened right
before sending next VHOST-USER command, then the vhost_dev_set_log()
call in the vhost_migration_log() function will return error. This error
will lead to the assert() and close the QEMU migration source process.
For the vhost-user devices the disconnect event should not break the
migration process, because:
  - the device will be in the stopped state, so it will not be changed
    during migration
  - if reconnect will be made the migration log will be reinitialized as
    part of reconnect/init process:
    #0  vhost_log_global_start (listener=0x563989cf7be0)
    at hw/virtio/vhost.c:920
    #1  0x000056398603d8bc in listener_add_address_space (listener=0x563989cf7be0,
        as=0x563986ea4340 <address_space_memory>)
    at softmmu/memory.c:2664
    #2  0x000056398603dd30 in memory_listener_register (listener=0x563989cf7be0,
        as=0x563986ea4340 <address_space_memory>)
    at softmmu/memory.c:2740
    #3  0x0000563985fd6956 in vhost_dev_init (hdev=0x563989cf7bd8,
        opaque=0x563989cf7e30, backend_type=VHOST_BACKEND_TYPE_USER,
        busyloop_timeout=0)
    at hw/virtio/vhost.c:1385
    #4  0x0000563985f7d0b8 in vhost_user_blk_connect (dev=0x563989cf7990)
    at hw/block/vhost-user-blk.c:315
    #5  0x0000563985f7d3f6 in vhost_user_blk_event (opaque=0x563989cf7990,
        event=CHR_EVENT_OPENED)
    at hw/block/vhost-user-blk.c:379
Update the vhost-user-blk device with the internal started_vu field which
will be used for initialization (vhost_user_blk_start) and clean up
(vhost_user_blk_stop). This additional flag in the VhostUserBlk structure
will be used to track whether the device really needs to be stopped and
cleaned up on a vhost-user level.
The disconnect event will set the overall VHOST device (not vhost-user) to
the stopped state, so it can be used by the general vhost_migration_log
routine.
Such approach could be propogated to the other vhost-user devices, but
better idea is just to make the same connect/disconnect code for all the
vhost-user devices.

This migration issue was slightly discussed earlier:
  - https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg01509.html
  - https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg05241.html

Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <9fbfba06791a87813fcee3e2315f0b904cc6789a.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agopc: fix auto_enable_numa_with_memhp/auto_enable_numa_with_memdev for the 5.0 machine
David Hildenbrand [Thu, 20 Aug 2020 09:48:28 +0000 (11:48 +0200)] 
pc: fix auto_enable_numa_with_memhp/auto_enable_numa_with_memdev for the 5.0 machine

Unfortunately, a typo sneeked in: we want to set
auto_enable_numa_with_memdev to false, not auto_enable_numa_with_memhp.

Cc: qemu-stable@nongnu.org # v5.1
Fixes: 195784a0cfad (numa: Auto-enable NUMA when any memory devices are possible)
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200820094828.30348-1-david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovirtio-mem: detach the element from the virtqueue when error occurs
Li Qiang [Sun, 16 Aug 2020 14:22:45 +0000 (07:22 -0700)] 
virtio-mem: detach the element from the virtqueue when error occurs

If error occurs while processing the virtio request we should call
'virtqueue_detach_element' to detach the element from the virtqueue
before free the elem.

Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200816142245.17556-1-liq3ea@163.com>
Fixes: 910b25766b ("virtio-mem: Paravirtualized memory hot(un)plug")
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovhost-vdpa: batch updating IOTLB mappings
Jason Wang [Mon, 7 Sep 2020 10:49:03 +0000 (18:49 +0800)] 
vhost-vdpa: batch updating IOTLB mappings

To speed up the memory mapping updating between vhost-vDPA and vDPA
device driver, this patch passes the IOTLB batching flags via IOTLB
API. Two new flags was introduced, VHOST_IOTLB_BATCH_BEGIN is a hint
that a bathced IOTLB updating may be initiated from the
userspace. VHOST_IOTLB_BATCH_END is a hint that userspace has finished
the updating:

VHOST_IOTLB_BATCH_BEGIN
VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE
...
VHOST_IOTLB_BATCH_END

Vhost-vDPA can then know that all mappings has been set and can do
optimization like passing all the mappings to the vDPA device driver.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200907104903.31551-4-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agovhost: switch to use IOTLB v2 format
Jason Wang [Mon, 7 Sep 2020 10:49:02 +0000 (18:49 +0800)] 
vhost: switch to use IOTLB v2 format

This patch tries to switch to use new kernel IOTLB format V2. Previous
version may have inconsistent ABI between 32bit and 64bit machines
because of the hole after type field. Refer kernel commit
("429711aec282 vhost: switch to use new message format") for more
information.

To enable this feature, qemu need to use a new ioctl
VHOST_SET_BACKEND_FEATURE with VHOST_BACKEND_F_IOTLB_MSG_V2 bit. A new
vhost setting backend features ops was introduced. And when we try to
set features for vhost dev, we will examine the support of new IOTLB
format and enable it. This process is total transparent to guest,
which means we can have different IOTLB message type in src and dst
during migration.

The conversion of IOTLB message is straightforward, just check the
type and behave accordingly.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200907104903.31551-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agolinux headers: sync to 5.9-rc4
Jason Wang [Mon, 7 Sep 2020 10:49:01 +0000 (18:49 +0800)] 
linux headers: sync to 5.9-rc4

Update against Linux 5.9-rc4.

Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200907104903.31551-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
7 months agoMerge remote-tracking branch 'remotes/kraxel/tags/usb-20200928-pull-request' into...
Peter Maydell [Mon, 28 Sep 2020 18:31:50 +0000 (19:31 +0100)] 
Merge remote-tracking branch 'remotes/kraxel/tags/usb-20200928-pull-request' into staging

usb: xhci sysbus support.
usb: use lock guards.

# gpg: Signature made Mon 28 Sep 2020 14:16:22 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20200928-pull-request:
  hw/usb: Use lock guard macros
  usb: hcd-xhci-sysbus: Attach xhci to sysbus device
  usb/hcd-xhci: Split pci wrapper for xhci base model
  usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c
  usb/hcd-xhci: Make dma read/writes hooks pci free

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
7 months agoMerge remote-tracking branch 'remotes/alistair/tags/pull-register-20200927' into...
Peter Maydell [Mon, 28 Sep 2020 15:49:10 +0000 (16:49 +0100)] 
Merge remote-tracking branch 'remotes/alistair/tags/pull-register-20200927' into staging

Two small patches. One with a fix for the register API instance_size
and one for removing unused address variables from load_elf.

# gpg: Signature made Sun 27 Sep 2020 14:45:06 BST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-register-20200927:
  core/register: Specify instance_size in the TypeInfo
  load_elf: Remove unused address variables from callers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
7 months agoRevert "migration: Properly destroy variables on incoming side"
Dr. David Alan Gilbert [Mon, 28 Sep 2020 14:48:30 +0000 (15:48 +0100)] 
Revert "migration: Properly destroy variables on incoming side"

This reverts commit c02039a6f3730ddcf683a0ba9a175688c6db71a0.

This is breaking test 068 that does a loadvm twice.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
7 months agoMerge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-reques...
Peter Maydell [Mon, 28 Sep 2020 13:03:09 +0000 (14:03 +0100)] 
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Trivial Patches Pull request 20200928

# gpg: Signature made Mon 28 Sep 2020 10:15:00 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
  docs/system/deprecated: Move lm32 and unicore32 to the right section
  migration/multifd: Remove superfluous semicolons
  timer: Fix timer_mod_anticipate() documentation
  vhost-vdpa: remove useless variable
  Add *.pyc back to the .gitignore file
  virtio: vdpa: omit check return of g_malloc
  meson: fix static flag summary
  vhost-vdpa: fix indentation in vdpa_ops

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
7 months agohw/usb: Use lock guard macros
Amey Narkhede [Wed, 23 Sep 2020 13:43:27 +0000 (19:13 +0530)] 
hw/usb: Use lock guard macros

Use qemu LOCK_GUARD macros from "qemu/lockable.h" in
hw/usb/ccid-card-emulated.c, saves manual unlock calls.

Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200923134327.576139-1-ameynarkhede03@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
7 months agousb: hcd-xhci-sysbus: Attach xhci to sysbus device
Sai Pavan Boddu [Thu, 24 Sep 2020 14:20:53 +0000 (19:50 +0530)] 
usb: hcd-xhci-sysbus: Attach xhci to sysbus device

Use XHCI as sysbus device, add memory region property to get the
address space instance for dma read/write.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-5-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
7 months agousb/hcd-xhci: Split pci wrapper for xhci base model
Sai Pavan Boddu [Thu, 24 Sep 2020 14:20:52 +0000 (19:50 +0530)] 
usb/hcd-xhci: Split pci wrapper for xhci base model

This patch sets the base to use xhci as sysbus model, for which pci
specific hooks are moved to hcd-xhci-pci.c. As a part of this requirment
msi/msix interrupts handling is moved under XHCIPCIState. Made required
changes for qemu-xhci-nec.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-4-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
7 months agousb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c
Sai Pavan Boddu [Thu, 24 Sep 2020 14:20:51 +0000 (19:50 +0530)] 
usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c

Move pci specific devices to new file. This set the environment to move all
pci specific hooks in hcd-xhci.c to hcd-xhci-pci.c.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-3-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
7 months agousb/hcd-xhci: Make dma read/writes hooks pci free
Sai Pavan Boddu [Thu, 24 Sep 2020 14:20:50 +0000 (19:50 +0530)] 
usb/hcd-xhci: Make dma read/writes hooks pci free

This patch starts making the hcd-xhci.c pci free, as part of this
restructuring dma read/writes are handled without passing pci object.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1600957256-6494-2-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
7 months agocore/register: Specify instance_size in the TypeInfo
Alistair Francis [Thu, 20 Aug 2020 22:46:11 +0000 (15:46 -0700)] 
core/register: Specify instance_size in the TypeInfo

Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <4cf1beb7dafb9143c261d266557d3173bf160524.1598376594.git.alistair.francis@wdc.com>

7 months agoload_elf: Remove unused address variables from callers
BALATON Zoltan [Sun, 5 Jul 2020 17:22:11 +0000 (19:22 +0200)] 
load_elf: Remove unused address variables from callers

Several callers of load_elf() pass pointers for lowaddr and highaddr
parameters which are then not used for anything. This may stem from a
misunderstanding that load_elf need a value here but in fact it can
take NULL to ignore these values. Remove such unused variables and
pass NULL instead from callers that don't need these.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20200705174020.BDD0174633F@zero.eik.bme.hu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
7 months agoMerge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200925a' into...
Peter Maydell [Fri, 25 Sep 2020 13:46:18 +0000 (14:46 +0100)] 
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200925a' into staging

Migration and virtiofsd pull

Chuan Zheng's Dirtyrate and TLS changes, with small fixes from Dov and
Luarent.
Small virtiofs changes from Harry, Stefan, Vivek and Jiachen.
One HMP/monitor rework from me.

# gpg: Signature made Fri 25 Sep 2020 13:03:50 BST
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20200925a: (26 commits)
  virtiofsd: Add -o allow_direct_io|no_allow_direct_io options
  virtiofsd: Used glib "shared" thread pool
  virtiofsd: document cache=auto default
  monitor: Use LOCK_GUARD macros
  migration/tls: add trace points for multifd-tls
  migration/tls: add support for multifd tls-handshake
  migration/tls: extract cleanup function for common-use
  migration/tls: add tls_hostname into MultiFDSendParams
  migration/tls: extract migration_tls_client_create for common-use
  migration/tls: save hostname into MigrationState
  migration: increase max-bandwidth to 128 MiB/s (1 Gib/s)
  migration: Truncate state file in xen-save-devices-state
  migration/dirtyrate: Add trace_calls to make it easier to debug
  migration/dirtyrate: Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function
  migration/dirtyrate: Implement calculate_dirtyrate() function
  migration/dirtyrate: Implement set_sample_page_period() and is_sample_period_valid()
  migration/dirtyrate: skip sampling ramblock with size below MIN_RAMBLOCK_SIZE
  migration/dirtyrate: Compare page hash results for recorded sampled page
  migration/dirtyrate: Record hash results for each sampled page
  migration/dirtyrate: move RAMBLOCK_FOREACH_MIGRATABLE into ram.h
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
7 months agovirtiofsd: Add -o allow_direct_io|no_allow_direct_io options
Jiachen Zhang [Mon, 24 Aug 2020 10:59:57 +0000 (18:59 +0800)] 
virtiofsd: Add -o allow_direct_io|no_allow_direct_io options

Due to the commit 65da4539803373ec4eec97ffc49ee90083e56efd, the O_DIRECT
open flag of guest applications will be discarded by virtiofsd. While
this behavior makes it consistent with the virtio-9p scheme when guest
applications use direct I/O, we no longer have any chance to bypass the
host page cache.

Therefore, we add a flag 'allow_direct_io' to lo_data. If '-o
 no_allow_direct_io' option is added, or none of '-o allow_direct_io' or
 '-o no_allow_direct_io' is added, the 'allow_direct_io' will be set to
 0, and virtiofsd discards O_DIRECT as before. If '-o allow_direct_io'
is added to the starting command-line, 'allow_direct_io' will be set to
1, so that the O_DIRECT flags will be retained and host page cache can
be bypassed.

Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200824105957.61265-1-zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
7 months agovirtiofsd: Used glib "shared" thread pool
Vivek Goyal [Mon, 21 Sep 2020 21:32:16 +0000 (17:32 -0400)] 
virtiofsd: Used glib "shared" thread pool

glib offers thread pools and it seems to support "exclusive" and "shared"
thread pools.

https://developer.gnome.org/glib/stable/glib-Thread-Pools.html#g-thread-pool-new

Currently we use "exlusive" thread pools but its performance seems to be
poor. I tried using "shared" thread pools and performance seems much
better. I posted performance results here.

https://www.redhat.com/archives/virtio-fs/2020-September/msg00080.html

So lets switch to shared thread pools. We can think of making it optional
once somebody can show in what cases exclusive thread pools offer better
results. For now, my simple performance tests across the board see
better results with shared thread pools.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20200921213216.GE13362@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  With seccomp fix from Miklos

7 months agovirtiofsd: document cache=auto default
Harry G. Coin [Wed, 16 Sep 2020 11:22:50 +0000 (12:22 +0100)] 
virtiofsd: document cache=auto default

The virtiofsd --help output documents the cache=auto default value but
the man page does not. Fix this.

Signed-off-by: Harry G. Coin <hgcoin@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200916112250.760245-1-stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
7 months agomonitor: Use LOCK_GUARD macros
Dr. David Alan Gilbert [Tue, 22 Sep 2020 09:57:41 +0000 (10:57 +0100)] 
monitor: Use LOCK_GUARD macros

Use the lock guard macros in monitor/misc.c - saves
a lot of unlocks in error paths, and the occasional goto.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200922095741.101911-1-dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
7 months agomigration/tls: add trace points for multifd-tls
Chuan Zheng [Tue, 15 Sep 2020 03:04:02 +0000 (11:04 +0800)] 
migration/tls: add trace points for multifd-tls

add trace points for multifd-tls for debug.

Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-7-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
7 months agomigration/tls: add support for multifd tls-handshake
Chuan Zheng [Tue, 15 Sep 2020 03:04:01 +0000 (11:04 +0800)] 
migration/tls: add support for multifd tls-handshake

Similar like migration main thread, we need to do handshake
for each multifd thread.

Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-6-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
7 months agomigration/tls: extract cleanup function for common-use
Chuan Zheng [Tue, 15 Sep 2020 03:04:00 +0000 (11:04 +0800)] 
migration/tls: extract cleanup function for common-use

multifd channel cleanup is need if multifd handshake failed,
let's extract it.

Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-5-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
7 months agomigration/tls: add tls_hostname into MultiFDSendParams
Chuan Zheng [Tue, 15 Sep 2020 03:03:59 +0000 (11:03 +0800)] 
migration/tls: add tls_hostname into MultiFDSendParams

Since multifd creation is async with migration_channel_connect, we should
pass the hostname from MigrationState to MultiFDSendParams.

Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Message-Id: <1600139042-104593-4-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
7 months agomigration/tls: extract migration_tls_client_create for common-use
Chuan Zheng [Tue, 15 Sep 2020 03:03:58 +0000 (11:03 +0800)] 
migration/tls: extract migration_tls_client_create for common-use

migration_tls_client_create will be used in multifd-tls, let's
extract it.

Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
7 months agomigration/tls: save hostname into MigrationState
Chuan Zheng [Tue, 15 Sep 2020 03:03:57 +0000 (11:03 +0800)] 
migration/tls: save hostname into MigrationState

hostname is need in multifd-tls, save hostname into MigrationState.

Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Message-Id: <1600139042-104593-2-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
7 months agomigration: increase max-bandwidth to 128 MiB/s (1 Gib/s)
Laurent Vivier [Mon, 21 Sep 2020 14:49:57 +0000 (16:49 +0200)] 
migration: increase max-bandwidth to 128 MiB/s (1 Gib/s)

max-bandwidth is set by default to 32 MiB/s (256 Mib/s)
since 2008 (5bb7910af031c).

Most of the CPUs can dirty memory faster than that now,
and this is clearly a problem with POWER where the page
size is 64 kiB and not 4 KiB.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200921144957.979989-1-lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
7 months agomigration: Truncate state file in xen-save-devices-state
Dov Murik [Mon, 21 Sep 2020 09:48:30 +0000 (09:48 +0000)] 
migration: Truncate state file in xen-save-devices-state

When running the xen-save-devices-state QMP command, if the filename
already exists it will be truncated before dumping the devices' state
into it.

Signed-off-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Message-Id: <20200921094830.114028-1-dovmurik@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
7 months agomigration/dirtyrate: Add trace_calls to make it easier to debug
Chuan Zheng [Wed, 16 Sep 2020 06:22:07 +0000 (14:22 +0800)] 
migration/dirtyrate: Add trace_calls to make it easier to debug

Add trace_calls to make it easier to debug

Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <1600237327-33618-13-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
7 months agomigration/dirtyrate: Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function
Chuan Zheng [Wed, 16 Sep 2020 06:22:06 +0000 (14:22 +0800)] 
migration/dirtyrate: Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function

Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function which could be called

Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1600237327-33618-12-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  atomic function fixup
  Wording fixup in migration.json based on Eric's review

7 months agomigration/dirtyrate: Implement calculate_dirtyrate() function
Chuan Zheng [Wed, 16 Sep 2020 06:22:05 +0000 (14:22 +0800)] 
migration/dirtyrate: Implement calculate_dirtyrate() function

Implement calculate_dirtyrate() function.

Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: YanYing Zhuang <ann.zhuangyanying@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-11-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>