qemu.git
21 months agohw/misc/aspeed_sdmc: Fix incorrect memory size
Philippe Mathieu-Daudé [Mon, 27 Jul 2020 15:12:10 +0000 (16:12 +0100)] 
hw/misc/aspeed_sdmc: Fix incorrect memory size

The SDRAM Memory Controller has a 32-bit address bus, thus
supports up to 4 GiB of DRAM. There is a signed to unsigned
conversion error with the AST2600 maximum memory size:

  (uint64_t)(2048 << 20) = (uint64_t)(-2147483648)
                         = 0xffffffff40000000
                         = 16 EiB - 2 GiB

Fix by using the IEC suffixes which are usually safer, and add
an assertion check to verify the memory is valid. This would have
caught this bug:

  $ qemu-system-arm -M ast2600-evb
  qemu-system-arm: hw/misc/aspeed_sdmc.c:258: aspeed_sdmc_realize: Assertion `asc->max_ram_size < 4 * GiB' failed.
  Aborted (core dumped)

Fixes: 1550d72679 ("aspeed/sdmc: Add AST2600 support")
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agoACPI: Assert that we don't run out of the preallocated memory
Dongjiu Geng [Mon, 27 Jul 2020 15:12:10 +0000 (16:12 +0100)] 
ACPI: Assert that we don't run out of the preallocated memory

data_length is a constant value, so we use assert instead of
condition check.

Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Message-id: 20200622113146.33421-1-gengdongjiu@huawei.com
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agoMerge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.1-20200727' into staging
Peter Maydell [Mon, 27 Jul 2020 08:33:04 +0000 (09:33 +0100)] 
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.1-20200727' into staging

ppc patch queue 2020-07-27

Only one patch in this batch, but it fixes a fairly important
regression, so we want it in qemu-5.1

# gpg: Signature made Mon 27 Jul 2020 06:51:57 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-5.1-20200727:
  pseries: fix kvmppc_set_fwnmi()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agopseries: fix kvmppc_set_fwnmi()
Laurent Vivier [Fri, 24 Jul 2020 08:35:33 +0000 (10:35 +0200)] 
pseries: fix kvmppc_set_fwnmi()

QEMU issues the ioctl(KVM_CAP_PPC_FWNMI) on the first vCPU.

If the first vCPU is currently running, the vCPU mutex is held
and the ioctl() cannot be done and waits until the mutex is released.
This never happens and the VM is stuck.

To avoid this deadlock, issue the ioctl on the same vCPU doing the
RTAS call.

The problem can be reproduced by booting a guest with several vCPUs
(the probability to have the problem is (n - 1) / n,  n = # of CPUs),
and then by triggering a kernel crash with "echo c >/proc/sysrq-trigger".

On the reboot, the kernel hangs after:

...
[    0.000000] -----------------------------------------------------
[    0.000000] ppc64_pft_size    = 0x0
[    0.000000] phys_mem_size     = 0x48000000
[    0.000000] dcache_bsize      = 0x80
[    0.000000] icache_bsize      = 0x80
[    0.000000] cpu_features      = 0x0001c06f8f4f91a7
[    0.000000]   possible        = 0x0003fbffcf5fb1a7
[    0.000000]   always          = 0x00000003800081a1
[    0.000000] cpu_user_features = 0xdc0065c2 0xaee00000
[    0.000000] mmu_features      = 0x3c006041
[    0.000000] firmware_features = 0x00000085455a445f
[    0.000000] physical_start    = 0x8000000
[    0.000000] -----------------------------------------------------
[    0.000000] numa:   NODE_DATA [mem 0x47f33c80-0x47f3ffff]

Fixes: ec010c00665b ("ppc/spapr: KVM FWNMI should not be enabled until guest requests it")
Cc: npiggin@gmail.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200724083533.281700-1-lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
21 months agoMerge remote-tracking branch 'remotes/rth/tags/pull-tcg-20200725' into staging
Peter Maydell [Sun, 26 Jul 2020 16:17:58 +0000 (17:17 +0100)] 
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20200725' into staging

Fix some cputlb commentary
Fix an hppa temporary leak
Fix an i386 translation issue with loop insns

# gpg: Signature made Sat 25 Jul 2020 17:03:59 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20200725:
  target/i386: Save cc_op before loop insns
  target/hppa: Free some temps in do_sub
  tcg: update comments for save_iotlb_data in cputlb

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agoMerge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-07-24-1' into...
Peter Maydell [Sat, 25 Jul 2020 19:30:58 +0000 (20:30 +0100)] 
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-07-24-1' into staging

Merge tpm 2020/07/24 v1

# gpg: Signature made Sat 25 Jul 2020 01:13:22 BST
# gpg:                using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE  C66B 75AD 6580 2A0B 4211

* remotes/stefanberger/tags/pull-tpm-2020-07-24-1:
  tpm_emulator: Report an error if chardev is missing
  tpm: Improve help on TPM types when none are available
  Revert "tpm: Clean up error reporting in tpm_init_tpmdev()"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agoMerge remote-tracking branch 'remotes/kraxel/tags/fixes-20200724-pull-request' into...
Peter Maydell [Sat, 25 Jul 2020 17:46:48 +0000 (18:46 +0100)] 
Merge remote-tracking branch 'remotes/kraxel/tags/fixes-20200724-pull-request' into staging

bugfixes: virtio-input, usb-dwc2, pixman.

# gpg: Signature made Fri 24 Jul 2020 17:42:43 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/fixes-20200724-pull-request:
  configure: Allow to build tools without pixman
  hw/input/virtio-input-hid.c: Don't undef CONFIG_CURSES
  hw: Only compile the usb-dwc2 controller if it is really needed

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agopython/machine: Change default timeout to 30 seconds
John Snow [Mon, 20 Jul 2020 16:02:52 +0000 (12:02 -0400)] 
python/machine: Change default timeout to 30 seconds

3 seconds is too short for some tests running inside busy VMs. Build it out to
a rather generous 30 seconds to find out conclusively if there are more severe
problems in the merge/CI tests.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20200720160252.104139-2-jsnow@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agotarget/i386: Save cc_op before loop insns
Richard Henderson [Mon, 20 Jul 2020 15:30:40 +0000 (08:30 -0700)] 
target/i386: Save cc_op before loop insns

We forgot to update cc_op before these branch insns,
which lead to losing track of the current eflags.

Buglink: https://bugs.launchpad.net/qemu/+bug/1888165
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200720154028.477457-1-richard.henderson@linaro.org>

21 months agotarget/hppa: Free some temps in do_sub
Richard Henderson [Mon, 20 Jul 2020 17:35:00 +0000 (10:35 -0700)] 
target/hppa: Free some temps in do_sub

Two temps allocated but not freed.  Do enough subtractions
within a single TB and one can run out of temps entirely.

Fixes: b2167459ae ("target-hppa: Implement basic arithmetic")
Buglink: https://bugs.launchpad.net/qemu/+bug/1880287
Tested-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200720174039.517902-1-richard.henderson@linaro.org>

21 months agotcg: update comments for save_iotlb_data in cputlb
Alex Bennée [Mon, 20 Jul 2020 12:23:58 +0000 (13:23 +0100)] 
tcg: update comments for save_iotlb_data in cputlb

I missed Emilio's review comments:

  Message-ID: <20200718205107.GA994221@sff>

and the patch got merged. Correcting the comments now.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200720122358.26881-1-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
21 months agotpm_emulator: Report an error if chardev is missing
Stefan Berger [Fri, 24 Jul 2020 12:57:26 +0000 (08:57 -0400)] 
tpm_emulator: Report an error if chardev is missing

This patch fixes the odd error reporting when trying to send a file
descriptor to the TPM emulator if one has not passed a valid chardev.

$ x86_64-softmmu/qemu-system-x86_64 -tpmdev emulator,id=tpm0
qemu-system-x86_64: -tpmdev emulator,id=tpm0: tpm-emulator: Failed to send CMD_SET_DATAFD: Success
qemu-system-x86_64: -tpmdev emulator,id=tpm0: tpm-emulator: Could not cleanly shutdown the TPM: Success

This is the new error report:

$ x86_64-softmmu/qemu-system-x86_64 -tpmdev emulator,id=tpm0
qemu-system-x86_64: -tpmdev emulator,id=tpm0: tpm-emulator: parameter 'chardev' is missing

This change does not hide the display of supported TPM types if a non-existent type is passed:

$ x86_64-softmmu/qemu-system-x86_64 -tpmdev nonexistent,id=tpm0
qemu-system-x86_64: -tpmdev nonexistent,id=tpm0: Parameter 'type' expects a TPM backend type
Supported TPM types (choose only one):
 passthrough   Passthrough TPM backend driver
    emulator   TPM emulator backend driver

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
21 months agotpm: Improve help on TPM types when none are available
Markus Armbruster [Thu, 23 Jul 2020 11:58:45 +0000 (13:58 +0200)] 
tpm: Improve help on TPM types when none are available

Help is a bit awkward when no TPM types are built into QEMU:

    $ qemu-system-x86_64 -tpmdev nonexistent,id=tpm0
    qemu-system-x86_64: -tpmdev nonexistent,id=tpm0: Parameter 'type' expects a TPM backend type
    Supported TPM types (choose only one):

Improve to

    qemu-system-x86_64: -tpmdev nonexistent,id=tpm0: Parameter 'type' expects a TPM backend type
    No TPM backend types are available

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
21 months agoRevert "tpm: Clean up error reporting in tpm_init_tpmdev()"
Markus Armbruster [Thu, 23 Jul 2020 11:58:44 +0000 (13:58 +0200)] 
Revert "tpm: Clean up error reporting in tpm_init_tpmdev()"

This reverts commit d10e05f15d5c3dd5e5cc59c5dfff460d89d48580.

We report some -tpmdev failures, but then continue as if all was fine.
Reproducer:

    $ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -chardev null,id=tpm0 -tpmdev emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0
    qemu-system-x86_64: -tpmdev emulator,id=tpm0,chardev=chrtpm: tpm-emulator: tpm chardev 'chrtpm' not found.
    qemu-system-x86_64: -tpmdev emulator,id=tpm0,chardev=chrtpm: tpm-emulator: Could not cleanly shutdown the TPM: No such file or directory
    QEMU 5.0.90 monitor - type 'help' for more information
    (qemu) qemu-system-x86_64: -device tpm-tis,tpmdev=tpm0: Property 'tpm-tis.tpmdev' can't find value 'tpm0'
    $ echo $?
    1

This is a regression caused by commit d10e05f15d "tpm: Clean up error
reporting in tpm_init_tpmdev()".  It's incomplete: be->create(opts)
continues to use error_report(), and we don't set an error when it
fails.

I figure converting the create() methods to Error would make some
sense, but I'm not sure it's worth the effort right now.  Revert the
broken commit instead, and add a comment to tpm_init_tpmdev().

Straightforward conflict in tpm.c resolved.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
21 months agoconfigure: Allow to build tools without pixman
Thomas Huth [Thu, 23 Jul 2020 14:11:23 +0000 (16:11 +0200)] 
configure: Allow to build tools without pixman

If pixman is not installed, it is currently not possible to run:

 .../configure  --disable-system --enable-tools

Seems like there was a dependency from one of the required source
files to pixman in the past, but since commit 1ac0206b2ae1ffaeec56
("qemu-timer.c: Trim list of included headers"), this dependency
should be gone. Thus allow to compile the tools without pixman now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200723141123.14765-1-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
21 months agoMerge remote-tracking branch 'remotes/armbru/tags/pull-error-2020-07-24' into staging
Peter Maydell [Fri, 24 Jul 2020 15:24:42 +0000 (16:24 +0100)] 
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2020-07-24' into staging

Error reporting patches patches for 2020-07-24

# gpg: Signature made Fri 24 Jul 2020 14:03:44 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-error-2020-07-24:
  qapi/error: Check format string argument in error_*prepend()
  sd/milkymist-memcard: Fix format string
  error: Strip trailing '\n' from error string arguments (again)
  coccinelle/err-bad-newline: Fix for Python 3, and add patterns

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agohw/input/virtio-input-hid.c: Don't undef CONFIG_CURSES
Peter Maydell [Thu, 23 Jul 2020 19:24:57 +0000 (20:24 +0100)] 
hw/input/virtio-input-hid.c: Don't undef CONFIG_CURSES

virtio-input-hid.c undefines CONFIG_CURSES before including
ui/console.h. However since commits e2f82e924d057935 and b0766612d16da18
that header does not have behaviour dependent on CONFIG_CURSES.
Remove the now-unneeded undef.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200723192457.28136-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
21 months agohw: Only compile the usb-dwc2 controller if it is really needed
Thomas Huth [Wed, 22 Jul 2020 15:47:19 +0000 (17:47 +0200)] 
hw: Only compile the usb-dwc2 controller if it is really needed

The USB_DWC2 switch is currently "default y", so it is included in all
qemu-system-* builds, even if it is not needed. Even worse, it does a
"select USB", so USB devices are now showing up as available on targets
that do not support USB at all. This sysbus device should only be
included by the boards that need it, i.e. by the Raspi machines.

Fixes: 153ef1662c ("dwc-hsotg (dwc2) USB host controller emulation")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200722154719.10130-1-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
21 months agoqapi/error: Check format string argument in error_*prepend()
Philippe Mathieu-Daudé [Thu, 23 Jul 2020 17:12:05 +0000 (19:12 +0200)] 
qapi/error: Check format string argument in error_*prepend()

error_propagate_prepend() "behaves like error_prepend()", and
error_prepend() uses "formatting @fmt, ... like printf()".
error_prepend() checks its format string argument, but
error_propagate_prepend() does not. Fix by addint the format
attribute to error_propagate_prepend() and error_vprepend().

This would have caught the bug fixed in the previous commit.

Missed in commit 4b5766488f "error: Fix use of error_prepend() with
&error_fatal, &error_abort".

Inspired-by: Stefan Weil <sw@weilnetz.de>
Suggested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200723171205.14949-1-philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
21 months agosd/milkymist-memcard: Fix format string
Stefan Weil [Wed, 22 Jul 2020 20:40:54 +0000 (22:40 +0200)] 
sd/milkymist-memcard: Fix format string

Fixes: b98e8d1230ff7023bb34ddeb7194424dfcbaf789
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20200722204054.1400555-1-sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
21 months agoerror: Strip trailing '\n' from error string arguments (again)
Markus Armbruster [Wed, 22 Jul 2020 08:40:46 +0000 (10:40 +0200)] 
error: Strip trailing '\n' from error string arguments (again)

Tracked down with scripts/coccinelle/err-bad-newline.cocci.

Cc: Peter Xu <peterx@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200722084048.1726105-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
21 months agococcinelle/err-bad-newline: Fix for Python 3, and add patterns
Markus Armbruster [Wed, 22 Jul 2020 08:40:45 +0000 (10:40 +0200)] 
coccinelle/err-bad-newline: Fix for Python 3, and add patterns

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200722084048.1726105-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
21 months agoMerge remote-tracking branch 'remotes/ehabkost/tags/x86-next-for-5.1-pull-request...
Peter Maydell [Fri, 24 Jul 2020 09:52:20 +0000 (10:52 +0100)] 
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-for-5.1-pull-request' into staging

x86 bug fix for -rc2

A fix from Vitaly Kuznetsov for a CPU reset bug
reported by Jan Kiszka.

# gpg: Signature made Thu 23 Jul 2020 20:10:40 BST
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-next-for-5.1-pull-request:
  KVM: fix CPU reset wrt HF2_GIF_MASK

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agoKVM: fix CPU reset wrt HF2_GIF_MASK
Vitaly Kuznetsov [Thu, 23 Jul 2020 14:27:01 +0000 (16:27 +0200)] 
KVM: fix CPU reset wrt HF2_GIF_MASK

HF2_GIF_MASK is set in env->hflags2 unconditionally on CPU reset
(see x86_cpu_reset()) but when calling KVM_SET_NESTED_STATE,
KVM_STATE_NESTED_GIF_SET is only valid for nSVM as e.g. nVMX code
looks like

if (kvm_state->hdr.vmx.vmxon_pa == -1ull) {
    if (kvm_state->flags & ~KVM_STATE_NESTED_EVMCS)
        return -EINVAL;
}

Also, when adjusting the environment after KVM_GET_NESTED_STATE we
need not reset HF2_GIF_MASK on VMX as e.g. x86_cpu_pending_interrupt()
expects it to be set.

Alternatively, we could've made env->hflags2 SVM-only.

Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Fixes: b16c0e20c742 ("KVM: add support for AMD nested live migration")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200723142701.2521161-1-vkuznets@redhat.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
21 months agoMerge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200722...
Peter Maydell [Thu, 23 Jul 2020 18:00:42 +0000 (19:00 +0100)] 
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200722-1' into staging

This PR contains a few RISC-V fixes.

The main fix is the correction of the goldfish RTC time. On top of that
some small fixes to the recently added vector extensions have been added
(including an assert that fixed a coverity report). There is a change in
the SiFive E debug memory size to match hardware. Finally there is a fix
for PMP accesses.

# gpg: Signature made Wed 22 Jul 2020 17:43:59 BST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20200722-1:
  target/riscv: Fix the range of pmpcfg of CSR funcion table
  hw/riscv: sifive_e: Correct debug block size
  target/riscv: fix vector index load/store constraints
  target/riscv: Quiet Coverity complains about vamo*
  goldfish_rtc: Fix non-atomic read behaviour of TIME_LOW/TIME_HIGH

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agoMerge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
Peter Maydell [Thu, 23 Jul 2020 12:38:21 +0000 (13:38 +0100)] 
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

acpi,virtio,pc: bugfixes

Fix bug in ACPI which were tripping up guests.
Fix a use-after-free with hotplug of virtio devices.
Block ability to create legacy devices which shouldn't have been
there in the first place.
Fix migration error handling with balloon.
Drop some dead code in virtio.
vtd emulation fixup.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 22 Jul 2020 13:07:26 BST
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  virtio-pci: Changed vdev to proxy for VirtIO PCI BAR callbacks.
  intel_iommu: Use correct shift for 256 bits qi descriptor
  virtio: verify that legacy support is not accidentally on
  virtio: list legacy-capable devices
  virtio-balloon: Replace free page hinting references to 'report' with 'hint'
  virtio-balloon: Add locking to prevent possible race when starting hinting
  virtio-balloon: Prevent guest from starting a report when we didn't request one
  virtio: Drop broken and superfluous object_property_set_link()
  acpi: accept byte and word access to core ACPI registers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agoMerge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-20200721' into staging
Peter Maydell [Thu, 23 Jul 2020 10:43:25 +0000 (11:43 +0100)] 
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-20200721' into staging

AVR patches

Fixes a memory leak reported by Coverity (CID 1430449).

CI jobs result:
. https://gitlab.com/philmd/qemu/-/pipelines/168722631

# gpg: Signature made Tue 21 Jul 2020 19:00:03 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/avr-20200721:
  hw/avr/boot: Fix memory leak in avr_load_firmware()
  qemu-common: Document qemu_find_file()
  qemu/osdep: Reword qemu_get_exec_dir() documentation
  qemu/osdep: Document os_find_datadir() return value

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agotarget/riscv: Fix the range of pmpcfg of CSR funcion table
Zong Li [Tue, 21 Jul 2020 12:40:50 +0000 (20:40 +0800)] 
target/riscv: Fix the range of pmpcfg of CSR funcion table

The range of Physical Memory Protection should be from CSR_PMPCFG0
to CSR_PMPCFG3, not to CSR_PMPADDR9.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <eae49e9252c9596e4f3bdb471772f79235141a87.1595335112.git.zong.li@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
21 months agohw/riscv: sifive_e: Correct debug block size
Bin Meng [Thu, 16 Jul 2020 09:30:56 +0000 (02:30 -0700)] 
hw/riscv: sifive_e: Correct debug block size

Currently the debug region size is set to 0x100, but according to
FE310-G000 and FE310-G002 manuals:

  FE310-G000: 0x100 - 0xFFF
  FE310-G002: 0x0   - 0xFFF

Change the size to 0x1000 that applies to both.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1594891856-15474-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
21 months agotarget/riscv: fix vector index load/store constraints
LIU Zhiwei [Tue, 21 Jul 2020 13:37:42 +0000 (21:37 +0800)] 
target/riscv: fix vector index load/store constraints

Although not explicitly specified that the the destination
vector register groups cannot overlap the source vector register group,
it is still necessary.

And this constraint has been added to the v0.8 spec.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200721133742.2298-2-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
21 months agotarget/riscv: Quiet Coverity complains about vamo*
LIU Zhiwei [Tue, 21 Jul 2020 13:37:41 +0000 (21:37 +0800)] 
target/riscv: Quiet Coverity complains about vamo*

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200721133742.2298-1-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
21 months agogoldfish_rtc: Fix non-atomic read behaviour of TIME_LOW/TIME_HIGH
Jessica Clarke [Sat, 18 Jul 2020 00:49:34 +0000 (01:49 +0100)] 
goldfish_rtc: Fix non-atomic read behaviour of TIME_LOW/TIME_HIGH

The specification says:

   0x00  TIME_LOW   R: Get current time, then return low-order 32-bits.
   0x04  TIME_HIGH  R: Return high 32-bits from previous TIME_LOW read.

   ...

   To read the value, the kernel must perform an IO_READ(TIME_LOW),
   which returns an unsigned 32-bit value, before an IO_READ(TIME_HIGH),
   which returns a signed 32-bit value, corresponding to the higher half
   of the full value.

However, we were just returning the current time for both. If the guest
is unlucky enough to read TIME_LOW and TIME_HIGH either side of an
overflow of the lower half, it will see time be in the future, before
jumping backwards on the next read, and Linux currently relies on the
atomicity guaranteed by the spec so is affected by this. Fix this
violation of the spec by caching the correct value for TIME_HIGH
whenever TIME_LOW is read, and returning that value for any TIME_HIGH
read.

Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200718004934.83174-1-jrtc27@jrtc27.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
21 months agovirtio-pci: Changed vdev to proxy for VirtIO PCI BAR callbacks.
Andrew Melnychenko [Mon, 6 Jul 2020 11:21:23 +0000 (14:21 +0300)] 
virtio-pci: Changed vdev to proxy for VirtIO PCI BAR callbacks.

There is an issue when callback may be called with invalid vdev.
It happens on unplug when vdev already deleted and VirtIOPciProxy is not.
So now, callbacks accept proxy device, and vdev retrieved from it.
Technically memio callbacks should be removed during the flatview update,
but memoryregions remain til PCI device(and it's address space) completely deleted.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1716352
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Message-Id: <20200706112123.971087-1-andrew@daynix.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
21 months agointel_iommu: Use correct shift for 256 bits qi descriptor
Liu Yi L [Sat, 4 Jul 2020 08:07:15 +0000 (01:07 -0700)] 
intel_iommu: Use correct shift for 256 bits qi descriptor

In chapter 10.4.23 of VT-d spec 3.0, Descriptor Width bit was introduced
in VTD_IQA_REG. Software could set this bit to tell VT-d the QI descriptor
from software would be 256 bits. Accordingly, the VTD_IQH_QH_SHIFT should
be 5 when descriptor size is 256 bits.

This patch adds the DW bit check when deciding the shift used to update
VTD_IQH_REG.

Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Message-Id: <1593850035-35483-1-git-send-email-yi.l.liu@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
21 months agovirtio: verify that legacy support is not accidentally on
Cornelia Huck [Tue, 7 Jul 2020 10:54:46 +0000 (12:54 +0200)] 
virtio: verify that legacy support is not accidentally on

If a virtio device does not have legacy support, make sure that
it is actually off, and bail out if not.

For virtio-pci, this means that any device without legacy support
that has been specified to modern-only (or that has been forced
to it) will work.

For virtio-ccw, this duplicates the check that is currently done
prior to realization for any device that explicitly specified no
support for legacy.

This catches devices that have not been fenced properly.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200707105446.677966-3-cohuck@redhat.com>
Cc: qemu-stable@nongnu.org
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
21 months agovirtio: list legacy-capable devices
Cornelia Huck [Tue, 7 Jul 2020 10:54:45 +0000 (12:54 +0200)] 
virtio: list legacy-capable devices

Several types of virtio devices had already been around before the
virtio standard was specified. These devices support virtio in legacy
(and transitional) mode.

Devices that have been added in the virtio standard are considered
non-transitional (i.e. with no support for legacy virtio).

Provide a helper function so virtio transports can figure that out
easily.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200707105446.677966-2-cohuck@redhat.com>
Cc: qemu-stable@nongnu.org
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
21 months agovirtio-balloon: Replace free page hinting references to 'report' with 'hint'
Alexander Duyck [Mon, 20 Jul 2020 17:51:28 +0000 (10:51 -0700)] 
virtio-balloon: Replace free page hinting references to 'report' with 'hint'

Recently a feature named Free Page Reporting was added to the virtio
balloon. In order to avoid any confusion we should drop the use of the word
'report' when referring to Free Page Hinting. So what this patch does is go
through and replace all instances of 'report' with 'hint" when we are
referring to free page hinting.

Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Message-Id: <20200720175128.21935.93927.stgit@localhost.localdomain>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
21 months agovirtio-balloon: Add locking to prevent possible race when starting hinting
Alexander Duyck [Mon, 20 Jul 2020 17:51:22 +0000 (10:51 -0700)] 
virtio-balloon: Add locking to prevent possible race when starting hinting

There is already locking in place when we are stopping free page hinting
but there is not similar protections in place when we start. I can only
assume this was overlooked as in most cases the page hinting should not be
occurring when we are starting the hinting, however there is still a chance
we could be processing hints by the time we get back around to restarting
the hinting so we are better off making sure to protect the state with the
mutex lock rather than just updating the value with no protections.

Based on feedback from Peter Maydell this issue had also been spotted by
Coverity: CID 1430269

Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Message-Id: <20200720175122.21935.78013.stgit@localhost.localdomain>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
21 months agovirtio-balloon: Prevent guest from starting a report when we didn't request one
Alexander Duyck [Mon, 20 Jul 2020 17:51:15 +0000 (10:51 -0700)] 
virtio-balloon: Prevent guest from starting a report when we didn't request one

Based on code review it appears possible for the driver to force the device
out of a stopped state when hinting by repeating the last ID it was
provided.

Prevent this by only allowing a transition to the start state when we are
in the requested state. This way the driver is only allowed to send one
descriptor that will transition the device into the start state. All others
will leave it in the stop state once it has finished.

Fixes: c13c4153f76d ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Message-Id: <20200720175115.21935.99563.stgit@localhost.localdomain>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
21 months agovirtio: Drop broken and superfluous object_property_set_link()
Markus Armbruster [Tue, 21 Jul 2020 12:11:53 +0000 (14:11 +0200)] 
virtio: Drop broken and superfluous object_property_set_link()

virtio_crypto_pci_realize() and copies the value of vcrypto->vdev's
property "cryptodev" to vcrypto's property:

    object_property_set_link(OBJECT(vrng), "rng", OBJECT(vrng->vdev.conf.rng),
                             NULL);

Since it does so only after realize, this always fails, but the error
is ignored.

It's actually superfluous: vcrypto's property is an alias of
vcrypto->vdev's property, created by virtio_instance_init_common().

Drop the call.

Same for virtio_ccw_crypto_realize(), virtio_rng_pci_realize(),
virtio_ccw_rng_realize().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200721121153.1128844-1-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
21 months agoacpi: accept byte and word access to core ACPI registers
Michael Tokarev [Mon, 20 Jul 2020 16:06:27 +0000 (19:06 +0300)] 
acpi: accept byte and word access to core ACPI registers

All ISA registers should be accessible as bytes, words or dwords
(if wide enough).  Fix the access constraints for acpi-pm-evt,
acpi-pm-tmr & acpi-cnt registers.

Fixes: 5d971f9e67 (memory: Revert "memory: accept mismatching sizes in memory_region_access_valid")
Fixes: afafe4bbe0 (apci: switch cnt to memory api)
Fixes: 77d58b1e47 (apci: switch timer to memory api)
Fixes: b5a7c024d2 (apci: switch evt to memory api)
Buglink: https://lore.kernel.org/xen-devel/20200630170913.123646-1-anthony.perard@citrix.com/T/
Buglink: https://bugs.debian.org/964793
BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=964247
BugLink: https://bugs.launchpad.net/bugs/1886318
Reported-By: Simon John <git@the-jedi.co.uk>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20200720160627.15491-1-mjt@msgid.tls.msk.ru>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
21 months agoMerge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-20200721' into staging
Peter Maydell [Wed, 22 Jul 2020 11:42:25 +0000 (12:42 +0100)] 
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-20200721' into staging

fw_cfg patches

Fixes the DEADCODE issue reported by Coverity (CID 1430396).

CI jobs result:
. https://gitlab.com/philmd/qemu/-/pipelines/169086301

# gpg: Signature made Tue 21 Jul 2020 18:52:46 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/fw_cfg-20200721:
  hw/nvram/fw_cfg: Let fw_cfg_add_from_generator() return boolean value
  hw/nvram/fw_cfg: Simplify fw_cfg_add_from_generator() error propagation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agoMerge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2020-07-21' into staging
Peter Maydell [Wed, 22 Jul 2020 08:13:46 +0000 (09:13 +0100)] 
Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2020-07-21' into staging

Monitor patches for 2020-07-21

# gpg: Signature made Tue 21 Jul 2020 16:23:27 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2020-07-21:
  qdev: Fix device_add DRIVER,help to print to monitor

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agoUpdate version for v5.1.0-rc1 release v5.1.0-rc1
Peter Maydell [Tue, 21 Jul 2020 19:28:59 +0000 (20:28 +0100)] 
Update version for v5.1.0-rc1 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agoMerge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Peter Maydell [Tue, 21 Jul 2020 18:25:48 +0000 (19:25 +0100)] 
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- file-posix: Handle `EINVAL` fallocate return value
- qemu-img convert -n: Keep qcow2 v2 target sparse

# gpg: Signature made Tue 21 Jul 2020 16:45:28 BST
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  iotests: Test sparseness for qemu-img convert -n
  qcow2: Implement v2 zero writes with discard if possible
  file-posix: Handle `EINVAL` fallocate return value

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agoMerge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-07-21' into staging
Peter Maydell [Tue, 21 Jul 2020 17:31:52 +0000 (18:31 +0100)] 
Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-07-21' into staging

QOM patches for 2020-07-21

# gpg: Signature made Tue 21 Jul 2020 16:40:27 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qom-2020-07-21:
  qom: Make info qom-tree sort children more efficiently
  qom: Document object_get_canonical_path() returns malloced string
  qom: Change object_get_canonical_path_component() not to malloc

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agoMerge remote-tracking branch 'remotes/kraxel/tags/fixes-20200721-pull-request' into...
Peter Maydell [Tue, 21 Jul 2020 16:36:14 +0000 (17:36 +0100)] 
Merge remote-tracking branch 'remotes/kraxel/tags/fixes-20200721-pull-request' into staging

fixes for xhci and modular builds.

# gpg: Signature made Tue 21 Jul 2020 15:02:33 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/fixes-20200721-pull-request:
  module: ignore NULL type
  qxl: fix modular builds with dtrace
  xhci: fix valid.max_access_size to access address registers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agoMerge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
Peter Maydell [Tue, 21 Jul 2020 15:50:42 +0000 (16:50 +0100)] 
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Tue 21 Jul 2020 14:31:13 BST
# gpg:                using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  hw/net/xgmac: Fix buffer overflow in xgmac_enet_send()
  hw/net: Added plen fix for IPv6

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agoiotests: Test sparseness for qemu-img convert -n
Kevin Wolf [Tue, 21 Jul 2020 13:55:20 +0000 (15:55 +0200)] 
iotests: Test sparseness for qemu-img convert -n

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200721135520.72355-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
21 months agoqom: Make info qom-tree sort children more efficiently
Markus Armbruster [Tue, 14 Jul 2020 16:02:02 +0000 (18:02 +0200)] 
qom: Make info qom-tree sort children more efficiently

Commit e8c9e65816 "qom: Make "info qom-tree" show children sorted"
sorts children the simple, stupid, quadratic way.  I thought the
number of children would be small enough for this not to matter.  I
was wrong: there are outliers with several hundred children, e.g ARM
machines nuri and smdkc210 each have a node with 513 children.

While n^2 sorting isn't noticeable in normal, human usage even for
n=513, it can be quite noticeable in certain automated tests.  In
particular, the sort made device-introspect-test even slower.  Commit
3e7b80f84d "tests: improve performance of device-introspect-test" just
fixed that by cutting back its excessive use of "info qom-tree".
Sorting more efficiently makes sense regardless, so do it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200714160202.3121879-6-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
21 months agoqdev: Fix device_add DRIVER,help to print to monitor
Markus Armbruster [Tue, 14 Jul 2020 16:01:58 +0000 (18:01 +0200)] 
qdev: Fix device_add DRIVER,help to print to monitor

Help on device properties gets printed to stdout instead of the
monitor.  If you have the monitor anywhere else, no help for you.
Broken when commit e1043d674d "qdev: use object_property_help()"
accidentally switched from qemu_printf() to printf().  Switch right
back.

Fixes: e1043d674d792ff64aebae1a3eafc08b38a8a085
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200714160202.3121879-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
21 months agoMerge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-07-21' into staging
Peter Maydell [Tue, 21 Jul 2020 15:10:38 +0000 (16:10 +0100)] 
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-07-21' into staging

QAPI patches patches for 2020-07-21

# gpg: Signature made Tue 21 Jul 2020 14:05:05 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2020-07-21:
  qapi: Fix visit_type_STRUCT() not to fail for null object

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
21 months agohw/nvram/fw_cfg: Let fw_cfg_add_from_generator() return boolean value
Philippe Mathieu-Daudé [Mon, 20 Jul 2020 12:20:15 +0000 (14:20 +0200)] 
hw/nvram/fw_cfg: Let fw_cfg_add_from_generator() return boolean value

Commits b6d7e9b66f..a43770df5d simplified the error propagation.
Similarly to commit 6fd5bef10b "qom: Make functions taking Error**
return bool, not void", let fw_cfg_add_from_generator() return a
boolean value, not void.
This allow to simplify parse_fw_cfg() and fixes the error handling
issue reported by Coverity (CID 1430396):

  In parse_fw_cfg():

    Variable assigned once to a constant guards dead code.

    Local variable local_err is assigned only once, to a constant
    value, making it effectively constant throughout its scope.
    If this is not the intent, examine the logic to see if there
    is a missing assignment that would make local_err not remain
    constant.

It's the call of fw_cfg_add_from_generator():

        Error *local_err = NULL;

        fw_cfg_add_from_generator(fw_cfg, name, gen_id, errp);
        if (local_err) {
            error_propagate(errp, local_err);
            return -1;
        }
        return 0;

If it fails, parse_fw_cfg() sets an error and returns 0, which is
wrong. Harmless, because the only caller passes &error_fatal.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: Coverity CID 1430396: 'Constant' variable guards dead code (DEADCODE)
Fixes: 6552d87c48 ("softmmu/vl: Let -fw_cfg option take a 'gen_id' argument")
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200721131911.27380-3-philmd@redhat.com>

21 months agohw/nvram/fw_cfg: Simplify fw_cfg_add_from_generator() error propagation
Philippe Mathieu-Daudé [Tue, 21 Jul 2020 13:05:51 +0000 (15:05 +0200)] 
hw/nvram/fw_cfg: Simplify fw_cfg_add_from_generator() error propagation

Document FWCfgDataGeneratorClass::get_data() return NULL
on error, and non-NULL on success. This allow us to simplify
fw_cfg_add_from_generator(). Since we don't need a local
variable to propagate the error, we can remove the ERRP_GUARD()
macro.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200721131911.27380-2-philmd@redhat.com>

21 months agoqcow2: Implement v2 zero writes with discard if possible
Kevin Wolf [Tue, 21 Jul 2020 13:55:19 +0000 (15:55 +0200)] 
qcow2: Implement v2 zero writes with discard if possible

qcow2 version 2 images don't support the zero flag for clusters, so for
write_zeroes requests, we return -ENOTSUP and get explicit zero buffer
writes. If the image doesn't have a backing file, we can do better: Just
discard the respective clusters.

This is relevant for 'qemu-img convert -O qcow2 -n', where qemu-img has
to assume that the existing target image may contain any data, so it has
to write zeroes. Without this patch, this results in a fully allocated
target image, even if the source image was empty.

Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200721135520.72355-2-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
21 months agofile-posix: Handle `EINVAL` fallocate return value
Antoine Damhet [Fri, 17 Jul 2020 13:56:04 +0000 (15:56 +0200)] 
file-posix: Handle `EINVAL` fallocate return value

The `detect-zeroes=unmap` option may issue unaligned
`FALLOC_FL_PUNCH_HOLE` requests, raw block devices can (and will) return
`EINVAL`, qemu should then write the zeroes to the blockdev instead of
issuing an `IO_ERROR`.

The problem can be reprodced like this:

$ qemu-io -c 'write -P 0 42 1234' --image-opts driver=host_device,filename=/dev/loop0,detect-zeroes=unmap
write failed: Invalid argument

Signed-off-by: Antoine Damhet <antoine.damhet@blade-group.com>
Message-Id: <20200717135603.51180-1-antoine.damhet@blade-group.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
21 months agoqom: Document object_get_canonical_path() returns malloced string
Markus Armbruster [Tue, 14 Jul 2020 16:02:01 +0000 (18:02 +0200)] 
qom: Document object_get_canonical_path() returns malloced string

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200714160202.3121879-5-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
21 months agoqom: Change object_get_canonical_path_component() not to malloc
Markus Armbruster [Tue, 14 Jul 2020 16:02:00 +0000 (18:02 +0200)] 
qom: Change object_get_canonical_path_component() not to malloc

object_get_canonical_path_component() returns a malloced copy of a
property name on success, null on failure.

19 of its 25 callers immediately free the returned copy.

Change object_get_canonical_path_component() to return the property
name directly.  Since modifying the name would be wrong, adjust the
return type to const char *.

Drop the free from the 19 callers become simpler, add the g_strdup()
to the other six.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200714160202.3121879-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
21 months agohw/avr/boot: Fix memory leak in avr_load_firmware()
Philippe Mathieu-Daudé [Tue, 14 Jul 2020 16:15:05 +0000 (18:15 +0200)] 
hw/avr/boot: Fix memory leak in avr_load_firmware()

The value returned by qemu_find_file() must be freed.

This fixes Coverity issue CID 1430449, which points out
that the memory returned by qemu_find_file() is leaked.

Fixes: Coverity CID 1430449 (RESOURCE_LEAK)
Fixes: 7dd8f6fde4 ('hw/avr: Add support for loading ELF/raw binaries')
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200714164257.23330-5-f4bug@amsat.org>

21 months agoqemu-common: Document qemu_find_file()
Philippe Mathieu-Daudé [Tue, 14 Jul 2020 16:10:10 +0000 (18:10 +0200)] 
qemu-common: Document qemu_find_file()

Document qemu_find_file(), in particular the returned
value which must be freed.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200714164257.23330-4-f4bug@amsat.org>

21 months agoqemu/osdep: Reword qemu_get_exec_dir() documentation
Philippe Mathieu-Daudé [Tue, 14 Jul 2020 16:14:33 +0000 (18:14 +0200)] 
qemu/osdep: Reword qemu_get_exec_dir() documentation

This comment is confuse, reword it a bit.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200714164257.23330-3-f4bug@amsat.org>

21 months agoqemu/osdep: Document os_find_datadir() return value
Philippe Mathieu-Daudé [Tue, 14 Jul 2020 16:10:44 +0000 (18:10 +0200)] 
qemu/osdep: Document os_find_datadir() return value

Document os_find_datadir() returned data must be freed.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200714164257.23330-2-f4bug@amsat.org>

21 months agohw/net/xgmac: Fix buffer overflow in xgmac_enet_send()
Mauro Matteo Cascella [Fri, 10 Jul 2020 09:19:41 +0000 (11:19 +0200)] 
hw/net/xgmac: Fix buffer overflow in xgmac_enet_send()

A buffer overflow issue was reported by Mr. Ziming Zhang, CC'd here. It
occurs while sending an Ethernet frame due to missing break statements
and improper checking of the buffer size.

Reported-by: Ziming Zhang <ezrakiez@gmail.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
21 months agohw/net: Added plen fix for IPv6
Andrew [Thu, 16 Jul 2020 03:53:24 +0000 (06:53 +0300)] 
hw/net: Added plen fix for IPv6

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1708065
With network backend with 'virtual header' - there was an issue
in 'plen' field. Overall, during TSO, 'plen' would be changed,
but with 'vheader' this field should be set to the size of the
payload itself instead of '0'.

Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
21 months agoMerge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-07-21' into staging
Peter Maydell [Tue, 21 Jul 2020 13:03:45 +0000 (14:03 +0100)] 
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-07-21' into staging

Block patches for 5.1:
- Let LUKS images only be shared between VMs if the guest device was
  configured to allow that
- Fix abort() from bdrv_aio_cancel() for guest devices without a BDS

# gpg: Signature made Tue 21 Jul 2020 12:47:17 BST
# gpg:                using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg:                issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2020-07-21:
  block: fix bdrv_aio_cancel() for ENOMEDIUM requests
  qemu-iotests: add testcase for bz #1857490
  block/crypto: disallow write sharing by default

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
22 months agoqapi: Fix visit_type_STRUCT() not to fail for null object
Markus Armbruster [Thu, 16 Jul 2020 15:06:17 +0000 (17:06 +0200)] 
qapi: Fix visit_type_STRUCT() not to fail for null object

To make deallocating partially constructed objects work, the
visit_type_STRUCT() need to succeed without doing anything when passed
a null object.

Commit cdd2b228b9 "qapi: Smooth visitor error checking in generated
code" broke that.  To reproduce, run tests/test-qobject-input-visitor
with AddressSanitizer:

    ==4353==ERROR: LeakSanitizer: detected memory leaks

    Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x7f192d0c5d28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7f192cd21b10 in g_malloc0 (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x51b10)
#2 0x556725f6bbee in visit_next_list qapi/qapi-visit-core.c:86
#3 0x556725f49e15 in visit_type_UserDefOneList tests/test-qapi-visit.c:474
#4 0x556725f4489b in test_visitor_in_fail_struct_in_list tests/test-qobject-input-visitor.c:1086
#5 0x7f192cd42f29  (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72f29)

    SUMMARY: AddressSanitizer: 16 byte(s) leaked in 1 allocation(s).

Test case /visitor/input/fail/struct-in-list feeds a list with a bad
element to the QObject input visitor.  Visiting that element duly
fails, and aborts the visit with the list only partially constructed:
the faulty object is null.  Cleaning up the partially constructed list
visits that null object, fails, and aborts the visit before the list
node gets freed.

Fix the the generated visit_type_STRUCT() to succeed for null objects.

Fixes: cdd2b228b973d2a29edf7696ef6e8b08ec329019
Reported-by: Li Qiang <liq3ea@163.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200716150617.4027356-1-armbru@redhat.com>
Tested-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
22 months agoblock: fix bdrv_aio_cancel() for ENOMEDIUM requests
Stefan Hajnoczi [Mon, 20 Jul 2020 10:01:41 +0000 (11:01 +0100)] 
block: fix bdrv_aio_cancel() for ENOMEDIUM requests

bdrv_aio_cancel() calls aio_poll() on the AioContext for the given I/O
request until it has completed. ENOMEDIUM requests are special because
there is no BlockDriverState when the drive has no medium!

Define a .get_aio_context() function for BlkAioEmAIOCB requests so that
bdrv_aio_cancel() can find the AioContext where the completion BH is
pending. Without this function bdrv_aio_cancel() aborts on ENOMEDIUM
requests!

libFuzzer triggered the following assertion:

  cat << EOF | qemu-system-i386 -M pc-q35-5.0 \
    -nographic -monitor none -serial none \
    -qtest stdio -trace ide\*
  outl 0xcf8 0x8000fa24
  outl 0xcfc 0xe106c000
  outl 0xcf8 0x8000fa04
  outw 0xcfc 0x7
  outl 0xcf8 0x8000fb20
  write 0x0 0x3 0x2780e7
  write 0xe106c22c 0xd 0x1130c218021130c218021130c2
  write 0xe106c218 0x15 0x110010110010110010110010110010110010110010
  EOF
  ide_exec_cmd IDE exec cmd: bus 0x56170a77a2b8; state 0x56170a77a340; cmd 0xe7
  ide_reset IDEstate 0x56170a77a340
  Aborted (core dumped)

  (gdb) bt
  #1  0x00007ffff4f93895 in abort () at /lib64/libc.so.6
  #2  0x0000555555dc6c00 in bdrv_aio_cancel (acb=0x555556765550) at block/io.c:2745
  #3  0x0000555555dac202 in blk_aio_cancel (acb=0x555556765550) at block/block-backend.c:1546
  #4  0x0000555555b1bd74 in ide_reset (s=0x555557213340) at hw/ide/core.c:1318
  #5  0x0000555555b1e3a1 in ide_bus_reset (bus=0x5555572132b8) at hw/ide/core.c:2422
  #6  0x0000555555b2aa27 in ahci_reset_port (s=0x55555720eb50, port=2) at hw/ide/ahci.c:650
  #7  0x0000555555b29fd7 in ahci_port_write (s=0x55555720eb50, port=2, offset=44, val=16) at hw/ide/ahci.c:360
  #8  0x0000555555b2a564 in ahci_mem_write (opaque=0x55555720eb50, addr=556, val=16, size=1) at hw/ide/ahci.c:513
  #9  0x000055555598415b in memory_region_write_accessor (mr=0x55555720eb80, addr=556, value=0x7fffffffb838, size=1, shift=0, mask=255, attrs=...) at softmmu/memory.c:483

Looking at bdrv_aio_cancel:

2728 /* async I/Os */
2729
2730 void bdrv_aio_cancel(BlockAIOCB *acb)
2731 {
2732     qemu_aio_ref(acb);
2733     bdrv_aio_cancel_async(acb);
2734     while (acb->refcnt > 1) {
2735         if (acb->aiocb_info->get_aio_context) {
2736             aio_poll(acb->aiocb_info->get_aio_context(acb), true);
2737         } else if (acb->bs) {
2738             /* qemu_aio_ref and qemu_aio_unref are not thread-safe, so
2739              * assert that we're not using an I/O thread.  Thread-safe
2740              * code should use bdrv_aio_cancel_async exclusively.
2741              */
2742             assert(bdrv_get_aio_context(acb->bs) == qemu_get_aio_context());
2743             aio_poll(bdrv_get_aio_context(acb->bs), true);
2744         } else {
2745             abort();     <===============
2746         }
2747     }
2748     qemu_aio_unref(acb);
2749 }

Fixes: 02c50efe08736116048d5fc355043080f4d5859c ("block: Add bdrv_aio_cancel_async")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Buglink: https://bugs.launchpad.net/qemu/+bug/1878255
Originally-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200720100141.129739-1-stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
22 months agoMerge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-07-21' into...
Peter Maydell [Tue, 21 Jul 2020 09:24:38 +0000 (10:24 +0100)] 
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-07-21' into staging

* Fix memory leak in fuzzer
* Fuzzer documentation updates
* Some other minor fuzzer updates
* Fix "make check-qtest SPEED=slow" (bug in msf2 instance_init)

# gpg: Signature made Tue 21 Jul 2020 07:48:10 BST
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2020-07-21:
  hw: Mark nd_table[] misuse in realize methods FIXME
  msf2: Unbreak device-list-properties for "msf-soc"
  MAINTAINERS: Extend the device fuzzing section
  docs/fuzz: add instructions for generating a coverage report
  docs/fuzz: add information about useful libFuzzer flags
  docs/fuzz: describe building fuzzers with enable-sanitizers
  fuzz: build without AddressSanitizer, by default
  gitlab-ci.yml: Add oss-fuzz build tests
  fuzz: Fix leak when assembling datadir path string
  scripts/oss-fuzz: Limit target list to i386-softmmu

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
22 months agomodule: ignore NULL type
Gerd Hoffmann [Mon, 20 Jul 2020 10:03:51 +0000 (12:03 +0200)] 
module: ignore NULL type

Just return in case module_load_qom_one(NULL) is called.
vga_interface_available() can do that.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200720100352.2477-3-kraxel@redhat.com>

22 months agoqxl: fix modular builds with dtrace
Gerd Hoffmann [Mon, 20 Jul 2020 10:03:50 +0000 (12:03 +0200)] 
qxl: fix modular builds with dtrace

Checking the enable/disable state of tracepoints via
trace_event_get_state_backends() does not work for modules.

qxl checks the state for a small optimization (avoid g_strndup
call in case log_buf will not be used anyway), so we can just
drop that check for modular builds.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200720100352.2477-2-kraxel@redhat.com>

22 months agoxhci: fix valid.max_access_size to access address registers
Laurent Vivier [Tue, 21 Jul 2020 08:33:22 +0000 (10:33 +0200)] 
xhci: fix valid.max_access_size to access address registers

QEMU XHCI advertises AC64 (64-bit addressing) but doesn't allow
64-bit mode access in "runtime" and "operational" MemoryRegionOps.

Set the max_access_size based on sizeof(dma_addr_t) as AC64 is set.

XHCI specs:
"If the xHC supports 64-bit addressing (AC64 = ‘1’), then software
should write 64-bit registers using only Qword accesses.  If a
system is incapable of issuing Qword accesses, then writes to the
64-bit address fields shall be performed using 2 Dword accesses;
low Dword-first, high-Dword second.  If the xHC supports 32-bit
addressing (AC64 = ‘0’), then the high Dword of registers containing
64-bit address fields are unused and software should write addresses
using only Dword accesses"

The problem has been detected with SLOF, as linux kernel always accesses
registers using 32-bit access even if AC64 is set and revealed by
5d971f9e6725 ("memory: Revert "memory: accept mismatching sizes in memory_region_access_valid"")

Suggested-by: Alexey Kardashevskiy <aik@au1.ibm.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 20200721083322.90651-1-lvivier@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
22 months agoqemu-iotests: add testcase for bz #1857490
Maxim Levitsky [Sun, 19 Jul 2020 12:20:59 +0000 (15:20 +0300)] 
qemu-iotests: add testcase for bz #1857490

Test that we can't write-share raw luks images by default,
but we still can with share-rw=on

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200719122059.59843-3-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
22 months agoblock/crypto: disallow write sharing by default
Maxim Levitsky [Sun, 19 Jul 2020 12:20:58 +0000 (15:20 +0300)] 
block/crypto: disallow write sharing by default

My commit 'block/crypto: implement the encryption key management'
accidently allowed raw luks images to be shared between different
qemu processes without share-rw=on explicit override.
Fix that.

Fixes: bbfdae91fb ("block/crypto: implement the encryption key management")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1857490

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200719122059.59843-2-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
22 months agohw: Mark nd_table[] misuse in realize methods FIXME
Markus Armbruster [Wed, 15 Jul 2020 14:04:40 +0000 (16:04 +0200)] 
hw: Mark nd_table[] misuse in realize methods FIXME

nd_table[] contains NIC configuration for boards to pick up.  Device
code has no business looking there.  Several devices do it anyway.
Two of them already have a suitable FIXME comment: "allwinner-a10" and
"msf2-soc".  Copy it to the others: "allwinner-h3", "xlnx-versal",
"xlnx,zynqmp", "sparc32-ledma", "riscv.sifive.u.soc".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200715140440.3540942-3-armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
22 months agomsf2: Unbreak device-list-properties for "msf-soc"
Markus Armbruster [Wed, 15 Jul 2020 14:04:39 +0000 (16:04 +0200)] 
msf2: Unbreak device-list-properties for "msf-soc"

Watch this:

    $ qemu-system-aarch64 -M ast2600-evb -S -display none -qmp stdio
    {"QMP": {"version": {"qemu": {"micro": 50, "minor": 0, "major": 5}, "package": "v5.0.0-2464-g3a9163af4e"}, "capabilities": ["oob"]}}
    {"execute": "qmp_capabilities"}
    {"return": {}}
    {"execute": "device-list-properties", "arguments": {"typename": "msf2-soc"}}
    Unsupported NIC model: ftgmac100
    armbru@dusky:~/work/images$ echo $?
    1

This is what breaks "make check SPEED=slow".

Root cause is m2sxxx_soc_initfn()'s messing with nd_table[] via
qemu_check_nic_model().  That's wrong.

We fixed the exact same bug for device "allwinner-a10" in commit
8aabc5437b "hw/arm/allwinner-a10: Do not use nd_table in instance_init
function".  Fix this instance the same way: move the offending code to
m2sxxx_soc_realize(), where it's less wrong, and add a FIXME comment.

Fixes: 05b7374a58 ("msf2: Add EMAC block to SmartFusion2 SoC")
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200715140440.3540942-2-armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
22 months agoMAINTAINERS: Extend the device fuzzing section
Thomas Huth [Tue, 21 Jul 2020 05:36:09 +0000 (07:36 +0200)] 
MAINTAINERS: Extend the device fuzzing section

The file docs/devel/fuzzing.txt should be in this section, too, and add
myself as a reviewer (since I often take the fuzzer patches through the
qtest-next tree, I should be notified on patches, too).

Message-Id: <20200721053926.17197-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
22 months agodocs/fuzz: add instructions for generating a coverage report
Alexander Bulekov [Mon, 6 Jul 2020 19:55:34 +0000 (15:55 -0400)] 
docs/fuzz: add instructions for generating a coverage report

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200706195534.14962-5-alxndr@bu.edu>
[thuth: Replaced --enable-sanitizers with --enable-fuzzing]
Signed-off-by: Thomas Huth <thuth@redhat.com>
22 months agodocs/fuzz: add information about useful libFuzzer flags
Alexander Bulekov [Mon, 6 Jul 2020 19:55:33 +0000 (15:55 -0400)] 
docs/fuzz: add information about useful libFuzzer flags

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200706195534.14962-4-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
22 months agodocs/fuzz: describe building fuzzers with enable-sanitizers
Alexander Bulekov [Mon, 6 Jul 2020 19:55:32 +0000 (15:55 -0400)] 
docs/fuzz: describe building fuzzers with enable-sanitizers

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200706195534.14962-3-alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
22 months agofuzz: build without AddressSanitizer, by default
Alexander Bulekov [Mon, 6 Jul 2020 19:55:31 +0000 (15:55 -0400)] 
fuzz: build without AddressSanitizer, by default

We already have a nice --enable-sanitizers option to enable
AddressSanitizer. There is no reason to duplicate and force this
functionality in --enable-fuzzing. In the future, if more sanitizers are
added to --enable-sanitizers, it might be impossible to build with both
--enable-sanitizers and --enable-fuzzing, since not all sanitizers are
compatible with libFuzzer. In that case, we could enable ASAN with
--extra-cflags="-fsanitize=address"

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200706195534.14962-2-alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Added missing $CFLAGS]
Signed-off-by: Thomas Huth <thuth@redhat.com>
22 months agogitlab-ci.yml: Add oss-fuzz build tests
Alexander Bulekov [Thu, 16 Jul 2020 16:33:30 +0000 (12:33 -0400)] 
gitlab-ci.yml: Add oss-fuzz build tests

This tries to build and run the fuzzers with the same build-script used
by oss-fuzz. This doesn't guarantee that the builds on oss-fuzz will
also succeed, since oss-fuzz provides its own compiler and fuzzer vars,
but it can catch changes that are not compatible with the the
./scripts/oss-fuzz/build.sh script.
The strange way of finding fuzzer binaries stems from the method used by
oss-fuzz:
https://github.com/google/oss-fuzz/blob/master/infra/base-images/base-runner/targets_list

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200720073223.22945-1-thuth@redhat.com>
[thuth: Tweak the "script" to make it work, exclude slirp test, etc.]
Signed-off-by: Thomas Huth <thuth@redhat.com>
22 months agofuzz: Fix leak when assembling datadir path string
Alexander Bulekov [Fri, 17 Jul 2020 16:35:23 +0000 (12:35 -0400)] 
fuzz: Fix leak when assembling datadir path string

We freed the string containing the final datadir path, but did not free
the path to the executable's directory that we get from
g_path_get_dirname(). Fix that.

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200717163523.1591-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
22 months agoscripts/oss-fuzz: Limit target list to i386-softmmu
Thomas Huth [Fri, 17 Jul 2020 06:57:42 +0000 (08:57 +0200)] 
scripts/oss-fuzz: Limit target list to i386-softmmu

The build.sh script only copies qemu-fuzz-i386 to the destination folder,
so we can speed up the compilation step quite a bit by not compiling the
other targets here.

Signed-off-by: Thomas Huth <thuth@redhat.com>
22 months agoMerge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200720' into...
Peter Maydell [Mon, 20 Jul 2020 14:58:07 +0000 (15:58 +0100)] 
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200720' into staging

target-arm queue:
 * virt: Don't enable MTE emulation by default
 * virt: Diagnose attempts to use MTE with memory-hotplug or KVM
   (rather than silently not working correctly)
 * util: Implement qemu_get_thread_id() for OpenBSD
 * qdev: Add doc comments for qdev_unrealize and GPIO functions,
   and standardize on doc-comments-in-header-file
 * hw/arm/armsse: Assert info->num_cpus is in-bounds in armsse_realize()
 * docs/system: Document canon-a1100, collie, gumstix, virt boards

# gpg: Signature made Mon 20 Jul 2020 13:55:36 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200720:
  docs/system: Document the arm virt board
  docs/system: Briefly document gumstix boards
  docs/system: Briefly document collie board
  docs/system: Briefly document canon-a1100 board
  hw/arm/armsse: Assert info->num_cpus is in-bounds in armsse_realize()
  qdev: Document GPIO related functions
  qdev: Document qdev_unrealize()
  qdev: Move doc comments from qdev.c to qdev-core.h
  util: Implement qemu_get_thread_id() for OpenBSD
  hw/arm/virt: Disable memory hotplug when MTE is enabled
  hw/arm/virt: Error for MTE enabled with KVM
  hw/arm/virt: Enable MTE via a machine property

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
22 months agodocs/system: Document the arm virt board
Peter Maydell [Mon, 13 Jul 2020 17:57:46 +0000 (18:57 +0100)] 
docs/system: Document the arm virt board

Document the arm 'virt' board, which has been undocumented
for far too long given that it is the main recommended board
type for arm guests.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200713175746.5936-5-peter.maydell@linaro.org

22 months agodocs/system: Briefly document gumstix boards
Peter Maydell [Mon, 13 Jul 2020 17:57:45 +0000 (18:57 +0100)] 
docs/system: Briefly document gumstix boards

Add skeletal documentation of the gumstix boards
('connex' and 'verdex').

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200713175746.5936-4-peter.maydell@linaro.org

22 months agodocs/system: Briefly document collie board
Peter Maydell [Mon, 13 Jul 2020 17:57:44 +0000 (18:57 +0100)] 
docs/system: Briefly document collie board

Add skeletal documentation of the collie board.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200713175746.5936-3-peter.maydell@linaro.org

22 months agodocs/system: Briefly document canon-a1100 board
Peter Maydell [Mon, 13 Jul 2020 17:57:43 +0000 (18:57 +0100)] 
docs/system: Briefly document canon-a1100 board

Add skeletal documentation of the canon-a1100 board.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200713175746.5936-2-peter.maydell@linaro.org

22 months agohw/arm/armsse: Assert info->num_cpus is in-bounds in armsse_realize()
Peter Maydell [Mon, 13 Jul 2020 14:37:16 +0000 (15:37 +0100)] 
hw/arm/armsse: Assert info->num_cpus is in-bounds in armsse_realize()

In armsse_realize() we have a loop over [0, info->num_cpus), which
indexes into various fixed-size arrays in the ARMSSE struct.  This
confuses Coverity, which warns that we might overrun those arrays
(CID 1430326, 1430337, 1430371, 1430414, 1430430).  This can't
actually happen, because the info struct is always one of the entries
in the armsse_variants[] array and num_cpus is either 1 or 2; we also
already assert in armsse_init() that num_cpus is not too large.
However, adding an assert to armsse_realize() like the one in
armsse_init() should help Coverity figure out that these code paths
aren't possible.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200713143716.9881-1-peter.maydell@linaro.org

22 months agoqdev: Document GPIO related functions
Peter Maydell [Sat, 11 Jul 2020 14:24:25 +0000 (15:24 +0100)] 
qdev: Document GPIO related functions

Add documentation comments for the various qdev functions
related to creating and connecting GPIO lines.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200711142425.16283-4-peter.maydell@linaro.org

22 months agoqdev: Document qdev_unrealize()
Peter Maydell [Sat, 11 Jul 2020 14:24:24 +0000 (15:24 +0100)] 
qdev: Document qdev_unrealize()

Add a doc comment for qdev_unrealize(), to go with the new
documentation for the realize part of the qdev lifecycle.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200711142425.16283-3-peter.maydell@linaro.org

22 months agoqdev: Move doc comments from qdev.c to qdev-core.h
Peter Maydell [Sat, 11 Jul 2020 14:24:23 +0000 (15:24 +0100)] 
qdev: Move doc comments from qdev.c to qdev-core.h

The doc-comments which document the qdev API are split between the
header file and the C source files, because as a project we haven't
been consistent about where we put them.

Move all the doc-comments in qdev.c to the header files, so that
users of the APIs don't have to look at the implementation files for
this information.

In the process, unify them into our doc-comment format and expand on
them in some cases to clarify expected use cases.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200711142425.16283-2-peter.maydell@linaro.org

22 months agoutil: Implement qemu_get_thread_id() for OpenBSD
David CARLIER [Mon, 20 Jul 2020 09:25:36 +0000 (10:25 +0100)] 
util: Implement qemu_get_thread_id() for OpenBSD

Implement qemu_get_thread_id() for OpenBSD hosts, using
getthrid().

Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Brad Smith <brad@comstyle.com>
Message-id: CA+XhMqxD6gQDBaj8tX0CMEj3si7qYKsM8u1km47e_-U7MC37Pg@mail.gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tidied up commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
22 months agohw/arm/virt: Disable memory hotplug when MTE is enabled
Richard Henderson [Mon, 20 Jul 2020 09:25:36 +0000 (10:25 +0100)] 
hw/arm/virt: Disable memory hotplug when MTE is enabled

When MTE is enabled, tag memory must exist for all RAM.

It might be possible to simultaneously hot plug tag memory
alongside the corresponding normal memory, but for now just
disable hotplug.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200713213341.590275-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
22 months agohw/arm/virt: Error for MTE enabled with KVM
Richard Henderson [Mon, 20 Jul 2020 09:25:36 +0000 (10:25 +0100)] 
hw/arm/virt: Error for MTE enabled with KVM

While we expect KVM to support MTE at some future point,
it certainly won't be ready in time for qemu 5.1.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200713213341.590275-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
22 months agohw/arm/virt: Enable MTE via a machine property
Richard Henderson [Mon, 20 Jul 2020 09:25:36 +0000 (10:25 +0100)] 
hw/arm/virt: Enable MTE via a machine property

Control this cpu feature via a machine property, much as we do
with secure=on, since both require specialized support in the
machine setup to be functional.

Default MTE to off, since this feature implies extra overhead.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200713213341.590275-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
22 months agoMerge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.1-20200720' into staging
Peter Maydell [Mon, 20 Jul 2020 10:34:10 +0000 (11:34 +0100)] 
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.1-20200720' into staging

ppc patch queue 20200720

Here are some assorted fixes for qemu-5.1:
 * SLOF update with improved TPM handling, and fix for possible stack
   overflows on many-vcpu machines
 * Fix for NUMA distances on NVLink2 attached GPU memory nodes
 * Fixes to fail more gracefully on attempting to plug unsupported PCI bridge types
 * Don't allow pnv-psi device to be user created

# gpg: Signature made Mon 20 Jul 2020 06:29:21 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-5.1-20200720:
  pseries: Update SLOF firmware image
  spapr: Add a new level of NUMA for GPUs
  spapr_pci: Robustify support of PCI bridges
  ppc/pnv: Make PSI device types not user creatable

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
22 months agoMerge remote-tracking branch 'remotes/cminyard/tags/for-qemu-i2c-5' into staging
Peter Maydell [Mon, 20 Jul 2020 10:03:07 +0000 (11:03 +0100)] 
Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-i2c-5' into staging

Minor changes to:

Add an SMBus config entry

Cleanup/simplify/document some I2C interfaces

# gpg: Signature made Thu 16 Jul 2020 18:46:55 BST
# gpg:                using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg:                 aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg:                 aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg:                 aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688  2686 61F3 8C90 919B FF81

* remotes/cminyard/tags/for-qemu-i2c-5:
  hw/i2c: Document the I2C qdev helpers
  hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple()
  hw/i2c: Rename i2c_realize_and_unref() as i2c_slave_realize_and_unref()
  hw/i2c: Rename i2c_try_create_slave() as i2c_slave_new()
  hw/i2c/aspeed_i2c: Simplify aspeed_i2c_get_bus()
  hw/i2c/Kconfig: Add an entry for the SMBus

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
22 months agoMakefile: Remove config-devices.mak on "make clean"
Peter Maydell [Fri, 17 Jul 2020 15:25:08 +0000 (16:25 +0100)] 
Makefile: Remove config-devices.mak on "make clean"

The config-devices.mak files are generated by "make", and so they
should be deleted by "make clean".

(This is different from config-host.mak and config-all-disas.mak,
which are created by "configure" and so only deleted by
"make distclean".)

If we don't delete these files on "make clean", then the build
tree is left in a state where it has the config-devices.mak
file but not the config-devices.mak.d file, and make will not
realize that it needs to rebuild config-devices.mak if, for
instance, hw/sd/Kconfig changes.

NB: config-all-devices.mak is also generated by "make", but we
already remove it on "make clean".

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200717152508.10272-1-peter.maydell@linaro.org

22 months agopseries: Update SLOF firmware image
Alexey Kardashevskiy [Fri, 17 Jul 2020 01:15:31 +0000 (11:15 +1000)] 
pseries: Update SLOF firmware image

This adds tcgbios (this was posted earlier [1] but got lost)
and fixes FDT update at ibm,client-architecture-support
for huge guests.

The full list of changes:

Alexey Kardashevskiy (4):
      make: Define default rule for .c when V=1 or V=2
      version: update to 20200513
      fdt: Avoid recursion when traversing tree
      version: update to 20200717

Gustavo Romero (1):
      board-qemu: Fix comment about SLOF start address

Stefan Berger (6):
      tcgbios: Only write logs for PCRs that are allocated
      tcgbios: Fix the vendorInfoSize to be of type uint8_t
      tcgbios: Add support for SHA3 type of algorithms
      elf: Implement elf_get_file_size to determine size of an ELF image
      tcgbios: Implement tpm_hash_log_extend_event_buffer
      tcgbios: Measure the bootloader file read from disk

[1] https://patchwork.ozlabs.org/project/qemu-devel/patch/20200513024355.121476-1-aik@ozlabs.ru/

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>