qemu.git
2 months agoUpdate version for v5.2.0-rc0 release v5.2.0-rc0
Peter Maydell [Tue, 3 Nov 2020 21:11:57 +0000 (21:11 +0000)] 
Update version for v5.2.0-rc0 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agoMerge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20201103...
Peter Maydell [Tue, 3 Nov 2020 16:53:20 +0000 (16:53 +0000)] 
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20201103' into staging

This series adds support for migration to RISC-V QEMU and expands the
Microchip PFSoC to allow unmodified HSS and Linux boots.

# gpg: Signature made Tue 03 Nov 2020 15:19:45 GMT
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20201103:
  target/riscv/csr.c : add space before the open parenthesis '('
  hw/riscv: microchip_pfsoc: Hook the I2C1 controller
  hw/riscv: microchip_pfsoc: Correct DDR memory map
  hw/riscv: microchip_pfsoc: Map the reserved memory at address 0
  hw/riscv: microchip_pfsoc: Connect the SYSREG module
  hw/misc: Add Microchip PolarFire SoC SYSREG module support
  hw/riscv: microchip_pfsoc: Connect the IOSCB module
  hw/misc: Add Microchip PolarFire SoC IOSCB module support
  hw/riscv: microchip_pfsoc: Connect DDR memory controller modules
  hw/misc: Add Microchip PolarFire SoC DDR Memory Controller support
  hw/riscv: microchip_pfsoc: Document where to look at the SoC memory maps
  target/riscv: Add sifive_plic vmstate
  target/riscv: Add V extension state description
  target/riscv: Add H extension state description
  target/riscv: Add PMP state description
  target/riscv: Add basic vmstate description of CPU
  target/riscv: Merge m/vsstatus and m/vsstatush into one uint64_t unit
  hw/riscv: virt: Allow passing custom DTB
  hw/riscv: sifive_u: Allow passing custom DTB

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agoMerge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Peter Maydell [Tue, 3 Nov 2020 15:59:44 +0000 (15:59 +0000)] 
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- iotests: Fix pylint/mypy warnings with Python 3.9
- qmp: fix aio_poll() assertion failure on Windows
- Some minor fixes

# gpg: Signature made Tue 03 Nov 2020 15:25:01 GMT
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  block/vvfat: Fix bad printf format specifiers
  iotests: Use Python 3 style super()
  iotests: Disable unsubscriptable-object in pylint
  iotests.py: Fix type check errors in wait_migration()
  qemu-img convert: Free @sn_opts in all error cases
  qmp: fix aio_poll() assertion failure on Windows

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agoblock/vvfat: Fix bad printf format specifiers
AlexChen [Tue, 3 Nov 2020 09:42:56 +0000 (17:42 +0800)] 
block/vvfat: Fix bad printf format specifiers

We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
In addition, fix two error format problems found by checkpatch.pl:
ERROR: space required after that ',' (ctx:VxV)
+        fprintf(stderr,"%s attributes=0x%02x begin=%u size=%d\n",
                       ^
ERROR: line over 90 characters
+        fprintf(stderr, "%d, %s (%u, %d)\n", i, commit->path ? commit->path : "(null)", commit->param.rename.cluster, commit->action);

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-Id: <5FA12620.6030705@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2 months agoiotests: Use Python 3 style super()
Kevin Wolf [Tue, 27 Oct 2020 16:38:06 +0000 (17:38 +0100)] 
iotests: Use Python 3 style super()

pylint complains about the use of super with the current class and
instance as arguments in VM.__init__():

iotests.py:546:8: R1725: Consider using Python 3 style super() without arguments (super-with-arguments)

No reason not to follow the advice and make it happy, so let's do this.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027163806.290960-4-kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2 months agoiotests: Disable unsubscriptable-object in pylint
Kevin Wolf [Tue, 27 Oct 2020 16:38:05 +0000 (17:38 +0100)] 
iotests: Disable unsubscriptable-object in pylint

When run with Python 3.9, pylint incorrectly warns about things like
Optional[foo] because it doesn't recognise Optional as unsubscriptable.
This is a known pylint bug:

    https://github.com/PyCQA/pylint/issues/3882

Just disable this check to get rid of the warnings.

Disabling this shouldn't make us miss any real bug because mypy also
has a similar check ("... is not indexable").

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027163806.290960-3-kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2 months agoiotests.py: Fix type check errors in wait_migration()
Kevin Wolf [Tue, 27 Oct 2020 16:38:04 +0000 (17:38 +0100)] 
iotests.py: Fix type check errors in wait_migration()

Commit 1847a4a8c20 clarified that event_wait() can return None (though
only with timeout=0) and commit f12a282ff47 annotated it as returning
Optional[QMPMessage].

Type checks in wait_migration() fail because of the unexpected optional
return type:

iotests.py:750: error: Value of type variable "Msg" of "log" cannot be "Optional[Dict[str, Any]]"
iotests.py:751: error: Value of type "Optional[Dict[str, Any]]" is not indexable
iotests.py:754: error: Value of type "Optional[Dict[str, Any]]" is not indexable

Fortunately, the non-zero default timeout is used in the event_wait()
call, so we can make mypy happy by just asserting this.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027163806.290960-2-kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2 months agoqemu-img convert: Free @sn_opts in all error cases
Tuguoyi [Mon, 2 Nov 2020 09:04:57 +0000 (09:04 +0000)] 
qemu-img convert: Free @sn_opts in all error cases

@sn_opts is initialized at the beginning, so it should be deleted
after jumping to the lable 'fail_getopt'

Signed-off-by: Guoyi Tu <tu.guoyi@h3c.com>
Message-Id: <6ff1c5d372944494be3932274f75485d@h3c.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2 months agoqmp: fix aio_poll() assertion failure on Windows
Volker Rümelin [Wed, 21 Oct 2020 06:40:33 +0000 (08:40 +0200)] 
qmp: fix aio_poll() assertion failure on Windows

Commit 9ce44e2ce2 "qmp: Move dispatcher to a coroutine" modified
aio_poll() in util/aio-posix.c to avoid an assertion failure. This
change is missing in util/aio-win32.c.

Apply the changes to util/aio-posix.c to util/aio-win32.c too.
This fixes an assertion failure on Windows whenever QEMU exits.

$ ./qemu-system-x86_64.exe -machine pc,accel=tcg -display gtk
**
ERROR:../qemu/util/aio-win32.c:337:aio_poll: assertion failed:
(in_aio_context_home_thread(ctx))
Bail out! ERROR:../qemu/util/aio-win32.c:337:aio_poll: assertion
failed: (in_aio_context_home_thread(ctx))

Fixes: 9ce44e2ce2 ("qmp: Move dispatcher to a coroutine")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20201021064033.8600-1-vr_qemu@t-online.de>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2 months agotarget/riscv/csr.c : add space before the open parenthesis '('
Xinhao Zhang [Fri, 30 Oct 2020 00:48:15 +0000 (08:48 +0800)] 
target/riscv/csr.c : add space before the open parenthesis '('

Fix code style. Space required before the open parenthesis '('.

Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Reported-by: Euler Robot <euler.robot@huawei.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201030004815.4172849-1-zhangxinhao1@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agohw/riscv: microchip_pfsoc: Hook the I2C1 controller
Bin Meng [Wed, 28 Oct 2020 05:30:10 +0000 (13:30 +0800)] 
hw/riscv: microchip_pfsoc: Hook the I2C1 controller

The latest SD card image [1] released by Microchip ships a Linux
kernel with built-in PolarFire SoC I2C driver support. The device
tree file includes the description for the I2C1 node hence kernel
tries to probe the I2C1 device during boot.

It is enough to create an unimplemented device for I2C1 to allow
the kernel to continue booting to the shell.

[1] ftp://ftpsoc.microsemi.com/outgoing/core-image-minimal-dev-icicle-kit-es-sd-20201009141623.rootfs.wic.gz

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-11-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agohw/riscv: microchip_pfsoc: Correct DDR memory map
Bin Meng [Sun, 1 Nov 2020 17:05:38 +0000 (01:05 +0800)] 
hw/riscv: microchip_pfsoc: Correct DDR memory map

When system memory is larger than 1 GiB (high memory), PolarFire SoC
maps it at address 0x10_0000_0000. Address 0xC000_0000 and above is
aliased to the same 1 GiB low memory with different cache attributes.

At present QEMU maps the system memory contiguously from 0x8000_0000.
This corrects the wrong QEMU logic. Note address 0x14_0000_0000 is
the alias to the high memory, and even physical memory is only 1 GiB,
the HSS codes still tries to probe the high memory alias address.
It seems there is no issue on the real hardware, so we will have to
take that into the consideration in our emulation. Due to this, we
we increase the default system memory size to 1537 MiB (the minimum
required high memory size by HSS) so that user gets notified an error
when less than 1537 MiB is specified.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201101170538.3732-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agohw/riscv: microchip_pfsoc: Map the reserved memory at address 0
Bin Meng [Wed, 28 Oct 2020 05:30:08 +0000 (13:30 +0800)] 
hw/riscv: microchip_pfsoc: Map the reserved memory at address 0

Somehow HSS needs to access address 0 [1] for the DDR calibration data
which is in the chipset's reserved memory. Let's map it.

[1] See the config_copy() calls in various places in ddr_setup() in
    the HSS source codes.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-9-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agohw/riscv: microchip_pfsoc: Connect the SYSREG module
Bin Meng [Wed, 28 Oct 2020 05:30:07 +0000 (13:30 +0800)] 
hw/riscv: microchip_pfsoc: Connect the SYSREG module

Previously SYSREG was created as an unimplemented device. Now that
we have a simple SYSREG module, connect it.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-8-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agohw/misc: Add Microchip PolarFire SoC SYSREG module support
Bin Meng [Wed, 28 Oct 2020 05:30:06 +0000 (13:30 +0800)] 
hw/misc: Add Microchip PolarFire SoC SYSREG module support

This creates a minimum model for Microchip PolarFire SoC SYSREG
module. It only implements the ENVM_CR register to tell guest
software that eNVM is running at the configured divider rate.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-7-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agohw/riscv: microchip_pfsoc: Connect the IOSCB module
Bin Meng [Wed, 28 Oct 2020 05:30:05 +0000 (13:30 +0800)] 
hw/riscv: microchip_pfsoc: Connect the IOSCB module

Previously IOSCB_CFG was created as an unimplemented device. With
the new IOSCB model, its memory range is already covered by the
IOSCB hence remove the previous unimplemented device creation in
the SoC codes.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-6-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agohw/misc: Add Microchip PolarFire SoC IOSCB module support
Bin Meng [Wed, 28 Oct 2020 05:30:04 +0000 (13:30 +0800)] 
hw/misc: Add Microchip PolarFire SoC IOSCB module support

This creates a model for PolarFire SoC IOSCB [1] module. It actually
contains lots of sub-modules like various PLLs to control different
peripherals. Only the mininum capabilities are emulated to make the
HSS DDR memory initialization codes happy. Lots of sub-modules are
created as an unimplemented devices.

[1] PF_SoC_RegMap_V1_1/MPFS250T/mpfs250t_ioscb_memmap_dri.htm in
    https://www.microsemi.com/document-portal/doc_download/1244581-polarfire-soc-register-map

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-5-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agohw/riscv: microchip_pfsoc: Connect DDR memory controller modules
Bin Meng [Wed, 28 Oct 2020 05:30:03 +0000 (13:30 +0800)] 
hw/riscv: microchip_pfsoc: Connect DDR memory controller modules

Connect DDR SGMII PHY module and CFG module to the PolarFire SoC.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-4-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agohw/misc: Add Microchip PolarFire SoC DDR Memory Controller support
Bin Meng [Wed, 28 Oct 2020 05:30:02 +0000 (13:30 +0800)] 
hw/misc: Add Microchip PolarFire SoC DDR Memory Controller support

The PolarFire SoC DDR Memory Controller mainly includes 2 modules,
called SGMII PHY module and the CFG module, as documented in the
chipset datasheet.

This creates a single file that groups these 2 modules, providing
the minimum functionalities that make the HSS DDR initialization
codes happy.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-3-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agohw/riscv: microchip_pfsoc: Document where to look at the SoC memory maps
Bin Meng [Wed, 28 Oct 2020 05:30:01 +0000 (13:30 +0800)] 
hw/riscv: microchip_pfsoc: Document where to look at the SoC memory maps

It is not easy to find out the memory map for a specific component
in the PolarFire SoC as the information is scattered in different
documents. Add some comments so that people can know where to get
such information from the Microchip website.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-2-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agotarget/riscv: Add sifive_plic vmstate
Yifei Jiang [Mon, 26 Oct 2020 11:55:30 +0000 (19:55 +0800)] 
target/riscv: Add sifive_plic vmstate

Add sifive_plic vmstate for supporting sifive_plic migration.
Current vmstate framework only supports one structure parameter
as num field to describe variable length arrays, so introduce
num_enables.

Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201026115530.304-7-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agotarget/riscv: Add V extension state description
Yifei Jiang [Mon, 26 Oct 2020 11:55:29 +0000 (19:55 +0800)] 
target/riscv: Add V extension state description

In the case of supporting V extension, add V extension description
to vmstate_riscv_cpu.

Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201026115530.304-6-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agotarget/riscv: Add H extension state description
Yifei Jiang [Mon, 26 Oct 2020 11:55:28 +0000 (19:55 +0800)] 
target/riscv: Add H extension state description

In the case of supporting H extension, add H extension description
to vmstate_riscv_cpu.

Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201026115530.304-5-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agotarget/riscv: Add PMP state description
Yifei Jiang [Mon, 26 Oct 2020 11:55:27 +0000 (19:55 +0800)] 
target/riscv: Add PMP state description

In the case of supporting PMP feature, add PMP state description
to vmstate_riscv_cpu.

'vmstate_pmp_addr' and 'num_rules' could be regenerated by
pmp_update_rule(). But there exists the problem of updating
num_rules repeatedly in pmp_update_rule(). So here extracts
pmp_update_rule_addr() and pmp_update_rule_nums() to update
'vmstate_pmp_addr' and 'num_rules' respectively.

Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201026115530.304-4-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agotarget/riscv: Add basic vmstate description of CPU
Yifei Jiang [Mon, 26 Oct 2020 11:55:26 +0000 (19:55 +0800)] 
target/riscv: Add basic vmstate description of CPU

Add basic CPU state description to the newly created machine.c

Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201026115530.304-3-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agotarget/riscv: Merge m/vsstatus and m/vsstatush into one uint64_t unit
Yifei Jiang [Mon, 26 Oct 2020 11:55:25 +0000 (19:55 +0800)] 
target/riscv: Merge m/vsstatus and m/vsstatush into one uint64_t unit

mstatus/mstatush and vsstatus/vsstatush are two halved for RISCV32.
This patch expands mstatus and vsstatus to uint64_t instead of
target_ulong so that it can be saved as one unit and reduce some
ifdefs in the code.

Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201026115530.304-2-jiangyifei@huawei.com

2 months agohw/riscv: virt: Allow passing custom DTB
Anup Patel [Thu, 22 Oct 2020 05:32:25 +0000 (11:02 +0530)] 
hw/riscv: virt: Allow passing custom DTB

Extend virt machine to allow passing custom DTB using "-dtb"
command-line parameter. This will help users pass modified DTB
to virt machine.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201022053225.2596110-2-anup.patel@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agohw/riscv: sifive_u: Allow passing custom DTB
Anup Patel [Thu, 22 Oct 2020 05:32:24 +0000 (11:02 +0530)] 
hw/riscv: sifive_u: Allow passing custom DTB

Extend sifive_u machine to allow passing custom DTB using "-dtb"
command-line parameter. This will help users pass modified DTB
or Linux SiFive DTB to sifive_u machine.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201022053225.2596110-1-anup.patel@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2 months agoMerge remote-tracking branch 'remotes/berrange-gitlab/tags/sock-next-pull-request...
Peter Maydell [Tue, 3 Nov 2020 14:40:40 +0000 (14:40 +0000)] 
Merge remote-tracking branch 'remotes/berrange-gitlab/tags/sock-next-pull-request' into staging

 - Fix inverted logic in abstract socket QAPI support
 - Only report abstract socket support in QAPI on Linux hosts
 - Expand test coverage
 - Misc other code cleanups

# gpg: Signature made Tue 03 Nov 2020 14:00:53 GMT
# gpg:                using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange-gitlab/tags/sock-next-pull-request:
  sockets: Make abstract UnixSocketAddress depend on CONFIG_LINUX
  sockets: Bypass "replace empty @path" for abstract unix sockets
  char-socket: Fix qemu_chr_socket_address() for abstract sockets
  sockets: Fix socket_sockaddr_to_address_unix() for abstract sockets
  sockets: Fix default of UnixSocketAddress member @tight
  test-util-sockets: Test the complete abstract socket matrix
  test-util-sockets: Synchronize properly, don't sleep(1)
  test-util-sockets: Factor out test_socket_unix_abstract_one()
  test-util-sockets: Clean up SocketAddress construction
  test-util-sockets: Correct to set has_abstract, has_tight
  test-util-sockets: Plug file descriptor leak

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agosockets: Make abstract UnixSocketAddress depend on CONFIG_LINUX
Markus Armbruster [Mon, 2 Nov 2020 09:44:22 +0000 (10:44 +0100)] 
sockets: Make abstract UnixSocketAddress depend on CONFIG_LINUX

The abstract socket namespace is a non-portable Linux extension.  An
attempt to use it elsewhere should fail with ENOENT (the abstract
address looks like a "" pathname, which does not resolve).  We report
this failure like

    Failed to connect socket abc: No such file or directory

Tolerable, although ENOTSUP would be better.

However, introspection lies: it has @abstract regardless of host
support.  Easy enough to fix: since Linux provides them since 2.2,
'if': 'defined(CONFIG_LINUX)' should do.

The above failure becomes

    Parameter 'backend.data.addr.data.abstract' is unexpected

I consider this an improvement.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2 months agosockets: Bypass "replace empty @path" for abstract unix sockets
Markus Armbruster [Mon, 2 Nov 2020 09:44:21 +0000 (10:44 +0100)] 
sockets: Bypass "replace empty @path" for abstract unix sockets

unix_listen_saddr() replaces empty @path by unique value.  It obtains
the value by creating and deleting a unique temporary file with
mkstemp().  This is racy, as the comment explains.  It's also entirely
undocumented as far as I can tell.  Goes back to commit d247d25f18
"sockets: helper functions for qemu (Gerd Hoffman)", v0.10.0.

Since abstract socket addresses have no connection with filesystem
pathnames, making them up with mkstemp() seems inappropriate.  Bypass
the replacement of empty @path.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2 months agochar-socket: Fix qemu_chr_socket_address() for abstract sockets
Markus Armbruster [Mon, 2 Nov 2020 09:44:20 +0000 (10:44 +0100)] 
char-socket: Fix qemu_chr_socket_address() for abstract sockets

Commit 776b97d360 "qemu-sockets: add abstract UNIX domain socket
support" neglected to update qemu_chr_socket_address().  It shows
shows neither @abstract nor @tight.  Fix that.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2 months agosockets: Fix socket_sockaddr_to_address_unix() for abstract sockets
Markus Armbruster [Mon, 2 Nov 2020 09:44:19 +0000 (10:44 +0100)] 
sockets: Fix socket_sockaddr_to_address_unix() for abstract sockets

Commit 776b97d360 "qemu-sockets: add abstract UNIX domain socket
support" neglected to update socket_sockaddr_to_address_unix().  The
function returns a non-abstract socket address for abstract
sockets (wrong) with a null @path (also wrong; a non-optional QAPI str
member must never be null).

The null @path is due to confused code going back all the way to
commit 17c55decec "sockets: add helpers for creating SocketAddress
from a socket".

Add the required special case, and simplify the confused code.

Fixes: 776b97d3605ed0fc94443048fdf988c7725e38a9
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2 months agosockets: Fix default of UnixSocketAddress member @tight
Markus Armbruster [Mon, 2 Nov 2020 09:44:18 +0000 (10:44 +0100)] 
sockets: Fix default of UnixSocketAddress member @tight

An optional bool member of a QAPI struct can be false, true, or absent.
The previous commit demonstrated that socket_listen() and
socket_connect() are broken for absent @tight, and indeed QMP chardev-
add also defaults absent member @tight to false instead of true.

In C, QAPI members are represented by two fields, has_MEMBER and MEMBER.
We have:

            has_MEMBER    MEMBER
    false         true     false
    true          true      true
    absent       false  false/ignore

When has_MEMBER is false, MEMBER should be set to false on write, and
ignored on read.

For QMP, the QAPI visitors handle absent @tight by setting both
@has_tight and @tight to false.  unix_listen_saddr() and
unix_connect_saddr() however use @tight only, disregarding @has_tight.
This is wrong and means that absent @tight defaults to false whereas it
should default to true.

The same is true for @has_abstract, though @abstract defaults to
false and therefore has the same behavior for all of QMP, HMP and CLI.
Fix unix_listen_saddr() and unix_connect_saddr() to check
@has_abstract/@has_tight, and to default absent @tight to true.

However, this is only half of the story.  HMP chardev-add and CLI
-chardev so far correctly defaulted @tight to true, but defaults to
false again with the above fix for HMP and CLI.  In fact, the "tight"
and "abstract" options now break completely.

Digging deeper, we find that qemu_chr_parse_socket() also ignores
@has_tight, leaving it false when it sets @tight.  That is also wrong,
but the two wrongs cancelled out.  Fix qemu_chr_parse_socket() to set
@has_tight and @has_abstract; writing testcases for HMP and CLI is left
for another day.

Fixes: 776b97d3605ed0fc94443048fdf988c7725e38a9
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2 months agotest-util-sockets: Test the complete abstract socket matrix
Markus Armbruster [Mon, 2 Nov 2020 09:44:17 +0000 (10:44 +0100)] 
test-util-sockets: Test the complete abstract socket matrix

The test covers only two out of nine combinations.  Test all nine.
Four turn out to be broken.  Marked /* BUG */.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2 months agotest-util-sockets: Synchronize properly, don't sleep(1)
Markus Armbruster [Mon, 2 Nov 2020 09:44:16 +0000 (10:44 +0100)] 
test-util-sockets: Synchronize properly, don't sleep(1)

The abstract sockets test spawns a thread to listen and accept, and a
second one to connect, with a sleep(1) in between to "ensure" the
former is listening when the latter tries to connect.  Review fail.
Risks spurious test failure, say when a heavily loaded machine doesn't
schedule the first thread quickly enough.  It's also slow.

Listen and accept in the main thread, and start the connect thread in
between.  Look ma, no sleep!  Run time drops from 2s wall clock to a
few milliseconds.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2 months agotest-util-sockets: Factor out test_socket_unix_abstract_one()
Markus Armbruster [Mon, 2 Nov 2020 09:44:15 +0000 (10:44 +0100)] 
test-util-sockets: Factor out test_socket_unix_abstract_one()

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2 months agotest-util-sockets: Clean up SocketAddress construction
Markus Armbruster [Mon, 2 Nov 2020 09:44:14 +0000 (10:44 +0100)] 
test-util-sockets: Clean up SocketAddress construction

The thread functions build the SocketAddress from global variable
@abstract_sock_name and the tight flag passed as pointer
argument (either NULL or (gpointer)1).  There is no need for such
hackery; simply pass the SocketAddress instead.

While there, dumb down g_rand_int_range() to g_random_int().

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2 months agotest-util-sockets: Correct to set has_abstract, has_tight
Markus Armbruster [Mon, 2 Nov 2020 09:44:13 +0000 (10:44 +0100)] 
test-util-sockets: Correct to set has_abstract, has_tight

The code tested doesn't care, which is a bug I will fix shortly.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2 months agotest-util-sockets: Plug file descriptor leak
Markus Armbruster [Mon, 2 Nov 2020 09:44:12 +0000 (10:44 +0100)] 
test-util-sockets: Plug file descriptor leak

Fixes: 4d3a329af59ef8acd076f99f05e82531d8129b34
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2 months agoMerge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2020-10-27-v3-tag' into...
Peter Maydell [Tue, 3 Nov 2020 12:47:58 +0000 (12:47 +0000)] 
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2020-10-27-v3-tag' into staging

qemu-ga patch queue for soft-freeze

* add guest-get-disks for w32/linux
* add guest-{add,remove,get}-authorized-keys
* fix API violations and schema documentation inconsistencies with
  recently-added guest-get-devices

v3:
- fix checkpatch errors regarding disallowed usages of g_assert*
  macros and other warnings

v2:
- fix BSD build error due to missing stub for guest_get_disks
- fix clang build error on linux due to unused variable
- disable qga-ssh-test for now due to a memory leak within GLib when
  G_TEST_OPTION_ISOLATE_DIRS is passed to g_test_init() since it
  break Gitlab CI build-oss-fuzz test
- rebased and re-tested on master

# gpg: Signature made Tue 03 Nov 2020 02:30:50 GMT
# gpg:                using RSA key CEACC9E15534EBABB82D3FA03353C9CEF108B584
# gpg:                issuer "michael.roth@amd.com"
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>" [full]
# gpg:                 aka "Michael Roth <mdroth@utexas.edu>" [full]
# gpg:                 aka "Michael Roth <mdroth@linux.vnet.ibm.com>" [full]
# Primary key fingerprint: CEAC C9E1 5534 EBAB B82D  3FA0 3353 C9CE F108 B584

* remotes/mdroth/tags/qga-pull-2020-10-27-v3-tag:
  qga: add ssh-get-authorized-keys
  meson: minor simplification
  qga: add *reset argument to ssh-add-authorized-keys
  qga: add ssh-{add,remove}-authorized-keys
  glib-compat: add g_unix_get_passwd_entry_qemu()
  qga: add implementation of guest-get-disks for Windows
  qga: add implementation of guest-get-disks for Linux
  qga: add command guest-get-disks
  qga: Flatten simple union GuestDeviceId
  qga-win: Fix guest-get-devices error API violations
  qga: Use common time encoding for guest-get-devices 'driver-date'
  qga: Rename guest-get-devices return member 'address' to 'id'

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agoMerge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201102' into...
Peter Maydell [Tue, 3 Nov 2020 10:38:05 +0000 (10:38 +0000)] 
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201102' into staging

target-arm queue:
 * target/arm: Fix Neon emulation bugs on big-endian hosts
 * target/arm: fix handling of HCR.FB
 * target/arm: fix LORID_EL1 access check
 * disas/capstone: Fix monitor disassembly of >32 bytes
 * hw/arm/smmuv3: Fix potential integer overflow (CID 1432363)
 * hw/arm/boot: fix SVE for EL3 direct kernel boot
 * hw/display/omap_lcdc: Fix potential NULL pointer dereference
 * hw/display/exynos4210_fimd: Fix potential NULL pointer dereference
 * target/arm: Get correct MMU index for other-security-state
 * configure: Test that gio libs from pkg-config work
 * hw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts work
 * docs: Fix building with Sphinx 3
 * tests/qtest/npcm7xx_rng-test: Disable randomness tests

# gpg: Signature made Mon 02 Nov 2020 17:09:00 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20201102: (26 commits)
  tests/qtest/npcm7xx_rng-test: Disable randomness tests
  qemu-option-trace.rst.inc: Don't use option:: markup
  scripts/kerneldoc: For Sphinx 3 use c:macro for macros with arguments
  hw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts work
  configure: Test that gio libs from pkg-config work
  target/arm: Get correct MMU index for other-security-state
  hw/display/exynos4210_fimd: Fix potential NULL pointer dereference
  hw/display/omap_lcdc: Fix potential NULL pointer dereference
  hw/arm/boot: fix SVE for EL3 direct kernel boot
  hw/arm/smmuv3: Fix potential integer overflow (CID 1432363)
  disas/capstone: Fix monitor disassembly of >32 bytes
  target/arm: fix LORID_EL1 access check
  target/arm: fix handling of HCR.FB
  target/arm: Fix VUDOT/VSDOT (scalar) on big-endian hosts
  target/arm: Fix float16 pairwise Neon ops on big-endian hosts
  target/arm: Improve do_prewiden_3d
  target/arm: Simplify do_long_3d and do_2scalar_long
  target/arm: Rename neon_load_reg64 to vfp_load_reg64
  target/arm: Add read/write_neon_element64
  target/arm: Rename neon_load_reg32 to vfp_load_reg32
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agoqga: add ssh-get-authorized-keys
Marc-André Lureau [Tue, 20 Oct 2020 08:12:57 +0000 (12:12 +0400)] 
qga: add ssh-get-authorized-keys

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix-up merge conflicts due to qga-ssh-test being disabled in earlier
 patch due to G_TEST_OPTION_ISOLATE_DIRS triggering build-oss-fuzz
 leak detector.
*fix up style and disallowed g_assert* usage reported by checkpatch
Signed-off-by: Michael Roth <michael.roth@amd.com>
2 months agomeson: minor simplification
Marc-André Lureau [Tue, 20 Oct 2020 08:12:56 +0000 (12:12 +0400)] 
meson: minor simplification

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
2 months agoqga: add *reset argument to ssh-add-authorized-keys
Michael Roth [Tue, 3 Nov 2020 02:01:44 +0000 (20:01 -0600)] 
qga: add *reset argument to ssh-add-authorized-keys

I prefer 'reset' over 'clear', since 'clear' and keys may have some
other relations or meaning.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix disallowed g_assert* usage reported by checkpatch
Signed-off-by: Michael Roth <michael.roth@amd.com>
2 months agoqga: add ssh-{add,remove}-authorized-keys
Marc-André Lureau [Tue, 20 Oct 2020 08:12:52 +0000 (12:12 +0400)] 
qga: add ssh-{add,remove}-authorized-keys

Add new commands to add and remove SSH public keys from
~/.ssh/authorized_keys.

I took a different approach for testing, including the unit tests right
with the code. I wanted to overwrite the function to get the user
details, I couldn't easily do that over QMP. Furthermore, I prefer
having unit tests very close to the code, and unit files that are domain
specific (commands-posix is too crowded already). FWIW, that
coding/testing style is Rust-style (where tests can or should even be
part of the documentation!).

Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1885332

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
*squashed in fix-ups for setting file ownership and use of QAPI
 conditionals for CONFIG_POSIX instead of stub definitions
*disable qga-ssh-test for now due to G_TEST_OPTION_ISOLATE_DIRS
 triggering leak detector in build-oss-fuzz
*fix disallowed g_assert* usage reported by checkpatch
Signed-off-by: Michael Roth <michael.roth@amd.com>
2 months agoglib-compat: add g_unix_get_passwd_entry_qemu()
Marc-André Lureau [Tue, 20 Oct 2020 08:12:51 +0000 (12:12 +0400)] 
glib-compat: add g_unix_get_passwd_entry_qemu()

The glib function was introduced in 2.64. It's a safer version of
getpwnam, and also simpler to use than getpwnam_r.

Currently, it's only use by the next patch in qemu-ga, which doesn't
(well well...) need the thread safety guarantees. Since the fallback
version is still unsafe, I would rather keep the _qemu postfix, to make
sure it's not being misused by mistake. When/if necessary, we can
implement a safer fallback and drop the _qemu suffix.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
*fix checkpatch warnings about newlines before/after block comments
Signed-off-by: Michael Roth <michael.roth@amd.com>
2 months agoMerge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201102a' into...
Peter Maydell [Mon, 2 Nov 2020 20:29:50 +0000 (20:29 +0000)] 
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201102a' into staging

Migration and virtiofs fixes 2020-11-02

Fixes for postcopy migration test hang
A seccomp crash for virtiofsd on some !x86
Help message and minor CID fix

And another crack at Max's set.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 02 Nov 2020 19:54:59 GMT
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20201102a:
  tests/acceptance: Add virtiofs_submounts.py
  tests/acceptance/boot_linux: Accept SSH pubkey
  virtiofsd: Announce sub-mount points
  virtiofsd: Add mount ID to the lo_inode key
  meson.build: Check for statx()
  virtiofsd: Add attr_flags to fuse_entry_param
  virtiofsd: Check FUSE_SUBMOUNTS
  virtiofsd: Fix the help message of posix lock
  tools/virtiofsd: Check vu_init() return value (CID 1435958)
  virtiofsd: Seccomp: Add 'send' for syslog
  migration: Postpone the kick of the fault thread after recover
  migration: Unify reset of last_rb on destination node when recover

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agotests/acceptance: Add virtiofs_submounts.py
Max Reitz [Mon, 2 Nov 2020 16:18:59 +0000 (17:18 +0100)] 
tests/acceptance: Add virtiofs_submounts.py

This test invokes several shell scripts to create a random directory
tree full of submounts, and then check in the VM whether every submount
has its own ID and the structure looks as expected.

(Note that the test scripts must be non-executable, so Avocado will not
try to execute them as if they were tests on their own, too.)

Because at this commit's date it is unlikely that the Linux kernel on
the image provided by boot_linux.py supports submounts in virtio-fs, the
test will be cancelled if no custom Linux binary is provided through the
vmlinuz parameter.  (The on-image kernel can be used by providing an
empty string via vmlinuz=.)

So, invoking the test can be done as follows:
$ avocado run \
    tests/acceptance/virtiofs_submounts.py \
    -p vmlinuz=/path/to/linux/build/arch/x86/boot/bzImage

This test requires root privileges (through passwordless sudo -n),
because at this point, virtiofsd requires them.  (If you have a
timestamp_timeout period for sudoers (e.g. the default of 5 min), you
can provide this by executing something like "sudo true" before invoking
Avocado.)

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201102161859.156603-8-mreitz@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2 months agotests/acceptance/boot_linux: Accept SSH pubkey
Max Reitz [Mon, 2 Nov 2020 16:18:58 +0000 (17:18 +0100)] 
tests/acceptance/boot_linux: Accept SSH pubkey

Let download_cloudinit() take an optional pubkey, which subclasses of
BootLinux can pass through setUp().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-7-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2 months agovirtiofsd: Announce sub-mount points
Max Reitz [Mon, 2 Nov 2020 16:18:57 +0000 (17:18 +0100)] 
virtiofsd: Announce sub-mount points

Whenever we encounter a directory with an st_dev or mount ID that
differs from that of its parent, we set the FUSE_ATTR_SUBMOUNT flag so
the guest can create a submount for it.

We only need to do so in lo_do_lookup().  The following functions return
a fuse_attr object:
- lo_create(), though fuse_reply_create(): Calls lo_do_lookup().
- lo_lookup(), though fuse_reply_entry(): Calls lo_do_lookup().
- lo_mknod_symlink(), through fuse_reply_entry(): Calls lo_do_lookup().
- lo_link(), through fuse_reply_entry(): Creating a link cannot create a
  submount, so there is no need to check for it.
- lo_getattr(), through fuse_reply_attr(): Announcing submounts when the
  node is first detected (at lookup) is sufficient.  We do not need to
  return the submount attribute later.
- lo_do_readdir(), through fuse_add_direntry_plus(): Calls
  lo_do_lookup().

Make announcing submounts optional, so submounts are only announced to
the guest with the announce_submounts option.  Some users may prefer the
current behavior, so that the guest learns nothing about the host mount
structure.

(announce_submounts is force-disabled when the guest does not present
the FUSE_SUBMOUNTS capability, or when there is no statx().)

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-6-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2 months agovirtiofsd: Add mount ID to the lo_inode key
Max Reitz [Mon, 2 Nov 2020 16:18:56 +0000 (17:18 +0100)] 
virtiofsd: Add mount ID to the lo_inode key

Using st_dev is not sufficient to uniquely identify a mount: You can
mount the same device twice, but those are still separate trees, and
e.g. by mounting something else inside one of them, they may differ.

Using statx(), we can get a mount ID that uniquely identifies a mount.
If that is available, add it to the lo_inode key.

Most of this patch is taken from Miklos's mail here:
https://marc.info/?l=fuse-devel&m=160062521827983
(virtiofsd-use-mount-id.patch attachment)

Suggested-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-5-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2 months agomeson.build: Check for statx()
Max Reitz [Mon, 2 Nov 2020 16:18:55 +0000 (17:18 +0100)] 
meson.build: Check for statx()

Check whether the glibc provides statx() and if so, define CONFIG_STATX.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-4-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2 months agovirtiofsd: Add attr_flags to fuse_entry_param
Max Reitz [Mon, 2 Nov 2020 16:18:54 +0000 (17:18 +0100)] 
virtiofsd: Add attr_flags to fuse_entry_param

fuse_entry_param is converted to fuse_attr on the line (by
fill_entry()), so it should have a member that mirrors fuse_attr.flags.

fill_entry() should then copy this fuse_entry_param.attr_flags to
fuse_attr.flags.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-3-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2 months agovirtiofsd: Check FUSE_SUBMOUNTS
Max Reitz [Mon, 2 Nov 2020 16:18:53 +0000 (17:18 +0100)] 
virtiofsd: Check FUSE_SUBMOUNTS

FUSE_SUBMOUNTS is a pure indicator by the kernel to signal that it
supports submounts.  It does not check its state in the init reply, so
there is nothing for fuse_lowlevel.c to do but to check its existence
and copy it into fuse_conn_info.capable.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-2-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2 months agovirtiofsd: Fix the help message of posix lock
Jiachen Zhang [Tue, 27 Oct 2020 08:15:58 +0000 (16:15 +0800)] 
virtiofsd: Fix the help message of posix lock

The commit 88fc107956a5812649e5918e0c092d3f78bb28ad disabled remote
posix locks by default. But the --help message still says it is enabled
by default. So fix it to output no_posix_lock.

Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Message-Id: <20201027081558.29904-1-zhangjiachen.jaycee@bytedance.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2 months agotools/virtiofsd: Check vu_init() return value (CID 1435958)
Philippe Mathieu-Daudé [Mon, 2 Nov 2020 09:23:39 +0000 (10:23 +0100)] 
tools/virtiofsd: Check vu_init() return value (CID 1435958)

Since commit 6f5fd837889, vu_init() can fail if malloc() returns NULL.

This fixes the following Coverity warning:

  CID 1435958 (#1 of 1): Unchecked return value (CHECKED_RETURN)

Fixes: 6f5fd837889 ("libvhost-user: support many virtqueues")
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201102092339.2034297-1-philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2 months agovirtiofsd: Seccomp: Add 'send' for syslog
Dr. David Alan Gilbert [Mon, 2 Nov 2020 15:07:50 +0000 (15:07 +0000)] 
virtiofsd: Seccomp: Add 'send' for syslog

On ppc, and some other archs, it looks like syslog ends up using 'send'
rather than 'sendto'.

Reference: https://github.com/kata-containers/kata-containers/issues/1050

Reported-by: amulmek1@in.ibm.com
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201102150750.34565-1-dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2 months agomigration: Postpone the kick of the fault thread after recover
Peter Xu [Mon, 2 Nov 2020 15:30:10 +0000 (10:30 -0500)] 
migration: Postpone the kick of the fault thread after recover

The new migrate_send_rp_req_pages_pending() call should greatly improve
destination responsiveness because it will resync faulted address after
postcopy recovery.  However it is also the 1st place to initiate the page
request from the main thread.

One thing is overlooked on that migrate_send_rp_message_req_pages() is not
designed to be thread-safe.  So if we wake the fault thread before syncing all
the faulted pages in the main thread, it means they can race.

Postpone the wake up operation after the sync of faulted addresses.

Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201102153010.11979-3-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2 months agomigration: Unify reset of last_rb on destination node when recover
Peter Xu [Mon, 2 Nov 2020 15:30:09 +0000 (10:30 -0500)] 
migration: Unify reset of last_rb on destination node when recover

When postcopy recover happens, we need to reset last_rb after each return of
postcopy_pause_fault_thread() because that means we just got the postcopy
migration continued.

Unify this reset to the place right before we want to kick the fault thread
again, when we get the command MIG_CMD_POSTCOPY_RESUME from source.

This is actually more than that - because the main thread on destination will
now be able to call migrate_send_rp_req_pages_pending() too, so the fault
thread is not the only user of last_rb now.  Move the reset earlier will allow
the first call to migrate_send_rp_req_pages_pending() to use the reset value
even if called from the main thread.

(NOTE: this is not a real fix to 0c26781c09 mentioned below, however it is just
 a mark that when picking up 0c26781c09 we'd better have this one too; the real
 fix will come later)

Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201102153010.11979-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2 months agoqga: add implementation of guest-get-disks for Windows
Tomáš Golembiovský [Mon, 12 Oct 2020 08:36:03 +0000 (10:36 +0200)] 
qga: add implementation of guest-get-disks for Windows

The command lists all the physical disk drives. Unlike for Linux
partitions and virtual volumes are not listed.

Example output:

{
  "return": [
    {
      "name": "\\\\.\\PhysicalDrive0",
      "partition": false,
      "address": {
        "serial": "QM00001",
        "bus-type": "sata",
        ...
      },
      "dependents": []
    }
  ]
}

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
2 months agoqga: add implementation of guest-get-disks for Linux
Tomáš Golembiovský [Mon, 12 Oct 2020 08:36:02 +0000 (10:36 +0200)] 
qga: add implementation of guest-get-disks for Linux

The command lists all disks (real and virtual) as well as disk
partitions. For each disk the list of dependent disks is also listed and
/dev path is used as a handle so it can be matched with "name" field of
other returned disk entries. For disk partitions the "dependents" list
is populated with the the parent device for easier tracking of
hierarchy.

Example output:
{
  "return": [
    ...
    {
      "name": "/dev/dm-0",
      "partition": false,
      "dependents": [
        "/dev/sda2"
      ],
      "alias": "luks-7062202e-5b9b-433e-81e8-6628c40da9f7"
    },
    {
      "name": "/dev/sda2",
      "partition": true,
      "dependents": [
        "/dev/sda"
      ]
    },
    {
      "name": "/dev/sda",
      "partition": false,
      "address": {
        "serial": "SAMSUNG_MZ7LN512HCHP-000L1_S1ZKNXAG822493",
        "bus-type": "sata",
        ...
        "dev": "/dev/sda",
        "target": 0
      },
      "dependents": []
    },
    ...
  ]
}

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*add missing stub for !defined(CONFIG_FSFREEZE)
*remove unused deps_dir variable
Signed-off-by: Michael Roth <michael.roth@amd.com>
2 months agoMerge remote-tracking branch 'remotes/nvme/tags/pull-nvme-20201102' into staging
Peter Maydell [Mon, 2 Nov 2020 17:17:29 +0000 (17:17 +0000)] 
Merge remote-tracking branch 'remotes/nvme/tags/pull-nvme-20201102' into staging

nvme pull 2 Nov 2020

# gpg: Signature made Mon 02 Nov 2020 15:20:30 GMT
# gpg:                using RSA key DBC11D2D373B4A3755F502EC625156610A4F6CC0
# gpg: Good signature from "Keith Busch <kbusch@kernel.org>" [unknown]
# gpg:                 aka "Keith Busch <keith.busch@gmail.com>" [unknown]
# gpg:                 aka "Keith Busch <keith.busch@intel.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DBC1 1D2D 373B 4A37 55F5  02EC 6251 5661 0A4F 6CC0

* remotes/nvme/tags/pull-nvme-20201102: (30 commits)
  hw/block/nvme: fix queue identifer validation
  hw/block/nvme: fix create IO SQ/CQ status codes
  hw/block/nvme: fix prp mapping status codes
  hw/block/nvme: report actual LBA data shift in LBAF
  hw/block/nvme: add trace event for requests with non-zero status code
  hw/block/nvme: add nsid to get/setfeat trace events
  hw/block/nvme: reject io commands if only admin command set selected
  hw/block/nvme: support for admin-only command set
  hw/block/nvme: validate command set selected
  hw/block/nvme: support per-namespace smart log
  hw/block/nvme: fix log page offset check
  hw/block/nvme: remove pointless rw indirection
  hw/block/nvme: update nsid when registered
  hw/block/nvme: change controller pci id
  pci: allocate pci id for nvme
  hw/block/nvme: support multiple namespaces
  hw/block/nvme: refactor identify active namespace id list
  hw/block/nvme: add support for sgl bit bucket descriptor
  hw/block/nvme: add support for scatter gather lists
  hw/block/nvme: harden cmb access
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agotests/qtest/npcm7xx_rng-test: Disable randomness tests
Peter Maydell [Mon, 2 Nov 2020 16:52:18 +0000 (16:52 +0000)] 
tests/qtest/npcm7xx_rng-test: Disable randomness tests

The randomness tests in the NPCM7xx RNG test fail intermittently
but fairly frequently. On my machine running the test in a loop:
 while QTEST_QEMU_BINARY=./qemu-system-aarch64 ./tests/qtest/npcm7xx_rng-test; do true; done

will fail in less than a minute with an error like:
ERROR:../../tests/qtest/npcm7xx_rng-test.c:256:test_first_byte_runs:
assertion failed (calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE) > 0.01): (0.00286205989 > 0.01)

(Failures have been observed on all 4 of the randomness tests,
not just first_byte_runs.)

It's not clear why these tests are failing like this, but intermittent
failures make CI and merge testing awkward, so disable running them
unless a developer specifically sets QEMU_TEST_FLAKY_RNG_TESTS when
running the test suite, until we work out the cause.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201102152454.8287-1-peter.maydell@linaro.org
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
2 months agoqemu-option-trace.rst.inc: Don't use option:: markup
Peter Maydell [Mon, 2 Nov 2020 16:52:18 +0000 (16:52 +0000)] 
qemu-option-trace.rst.inc: Don't use option:: markup

Sphinx 3.2 is pickier than earlier versions about the option:: markup,
and complains about our usage in qemu-option-trace.rst:

../../docs/qemu-option-trace.rst.inc:4:Malformed option description
  '[enable=]PATTERN', should look like "opt", "-opt args", "--opt args",
  "/opt args" or "+opt args"

In this file, we're really trying to document the different parts of
the top-level --trace option, which qemu-nbd.rst and qemu-img.rst
have already introduced with an option:: markup.  So it's not right
to use option:: here anyway.  Switch to a different markup
(definition lists) which gives about the same formatted output.

(Unlike option::, this markup doesn't produce index entries; but
at the moment we don't do anything much with indexes anyway, and
in any case I think it doesn't make much sense to have individual
index entries for the sub-parts of the --trace option.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201030174700.7204-3-peter.maydell@linaro.org

2 months agoscripts/kerneldoc: For Sphinx 3 use c:macro for macros with arguments
Peter Maydell [Mon, 2 Nov 2020 16:52:18 +0000 (16:52 +0000)] 
scripts/kerneldoc: For Sphinx 3 use c:macro for macros with arguments

The kerneldoc script currently emits Sphinx markup for a macro with
arguments that uses the c:function directive. This is correct for
Sphinx versions earlier than Sphinx 3, where c:macro doesn't allow
documentation of macros with arguments and c:function is not picky
about the syntax of what it is passed. However, in Sphinx 3 the
c:macro directive was enhanced to support macros with arguments,
and c:function was made more picky about what syntax it accepted.

When kerneldoc is told that it needs to produce output for Sphinx
3 or later, make it emit c:function only for functions and c:macro
for macros with arguments. We assume that anything with a return
type is a function and anything without is a macro.

This fixes the Sphinx error:

/home/petmay01/linaro/qemu-from-laptop/qemu/docs/../include/qom/object.h:155:Error in declarator
If declarator-id with parameters (e.g., 'void f(int arg)'):
  Invalid C declaration: Expected identifier in nested name. [error at 25]
    DECLARE_INSTANCE_CHECKER ( InstanceType,  OBJ_NAME,  TYPENAME)
    -------------------------^
If parenthesis in noptr-declarator (e.g., 'void (*f(int arg))(double)'):
  Error in declarator or parameters
  Invalid C declaration: Expecting "(" in parameters. [error at 39]
    DECLARE_INSTANCE_CHECKER ( InstanceType,  OBJ_NAME,  TYPENAME)
    ---------------------------------------^

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201030174700.7204-2-peter.maydell@linaro.org

2 months agohw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts work
Peter Maydell [Mon, 2 Nov 2020 16:52:17 +0000 (16:52 +0000)] 
hw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts work

In gicv3_init_cpuif() we copy the ARMCPU gicv3_maintenance_interrupt
into the GICv3CPUState struct's maintenance_irq field.  This will
only work if the board happens to have already wired up the CPU
maintenance IRQ before the GIC was realized.  Unfortunately this is
not the case for the 'virt' board, and so the value that gets copied
is NULL (since a qemu_irq is really a pointer to an IRQState struct
under the hood).  The effect is that the CPU interface code never
actually raises the maintenance interrupt line.

Instead, since the GICv3CPUState has a pointer to the CPUState, make
the dereference at the point where we want to raise the interrupt, to
avoid an implicit requirement on board code to wire things up in a
particular order.

Reported-by: Jose Martins <josemartins90@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201009153904.28529-1-peter.maydell@linaro.org
Reviewed-by: Luc Michel <luc@lmichel.fr>
2 months agoconfigure: Test that gio libs from pkg-config work
Peter Maydell [Mon, 2 Nov 2020 16:52:17 +0000 (16:52 +0000)] 
configure: Test that gio libs from pkg-config work

On some hosts (eg Ubuntu Bionic) pkg-config returns a set of
libraries for gio-2.0 which don't actually work when compiling
statically. (Specifically, the returned library string includes
-lmount, but not -lblkid which -lmount depends upon, so linking
fails due to missing symbols.)

Check that the libraries work, and don't enable gio if they don't,
in the same way we do for gnutls.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200928160402.7961-1-peter.maydell@linaro.org

2 months agotarget/arm: Get correct MMU index for other-security-state
Peter Maydell [Mon, 2 Nov 2020 16:52:17 +0000 (16:52 +0000)] 
target/arm: Get correct MMU index for other-security-state

In arm_v7m_mmu_idx_for_secstate() we get the 'priv' level to pass to
armv7m_mmu_idx_for_secstate_and_priv() by calling arm_current_el().
This is incorrect when the security state being queried is not the
current one, because arm_current_el() uses the current security state
to determine which of the banked CONTROL.nPRIV bits to look at.
The effect was that if (for instance) Secure state was in privileged
mode but Non-Secure was not then we would return the wrong MMU index.

The only places where we are using this function in a way that could
trigger this bug are for the stack loads during a v8M function-return
and for the instruction fetch of a v8M SG insn.

Fix the bug by expanding out the M-profile version of the
arm_current_el() logic inline so it can use the passed in secstate
rather than env->v7m.secure.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201022164408.13214-1-peter.maydell@linaro.org

2 months agohw/display/exynos4210_fimd: Fix potential NULL pointer dereference
AlexChen [Mon, 2 Nov 2020 16:52:17 +0000 (16:52 +0000)] 
hw/display/exynos4210_fimd: Fix potential NULL pointer dereference

In exynos4210_fimd_update(), the pointer s is dereferinced before
being check if it is valid, which may lead to NULL pointer dereference.
So move the assignment to global_width after checking that the s is valid.

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 5F9F8D88.9030102@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agohw/display/omap_lcdc: Fix potential NULL pointer dereference
AlexChen [Mon, 2 Nov 2020 16:52:17 +0000 (16:52 +0000)] 
hw/display/omap_lcdc: Fix potential NULL pointer dereference

In omap_lcd_interrupts(), the pointer omap_lcd is dereferinced before
being check if it is valid, which may lead to NULL pointer dereference.
So move the assignment to surface after checking that the omap_lcd is valid
and move surface_bits_per_pixel(surface) to after the surface assignment.

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: AlexChen <alex.chen@huawei.com>
Message-id: 5F9CDB8A.9000001@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agohw/arm/boot: fix SVE for EL3 direct kernel boot
Rémi Denis-Courmont [Mon, 2 Nov 2020 16:52:16 +0000 (16:52 +0000)] 
hw/arm/boot: fix SVE for EL3 direct kernel boot

When booting a CPU with EL3 using the -kernel flag, set up CPTR_EL3 so
that SVE will not trap to EL3.

Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030151541.11976-1-remi@remlab.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agohw/arm/smmuv3: Fix potential integer overflow (CID 1432363)
Philippe Mathieu-Daudé [Mon, 2 Nov 2020 16:52:16 +0000 (16:52 +0000)] 
hw/arm/smmuv3: Fix potential integer overflow (CID 1432363)

Use the BIT_ULL() macro to ensure we use 64-bit arithmetic.
This fixes the following Coverity issue (OVERFLOW_BEFORE_WIDEN):

  CID 1432363 (#1 of 1): Unintentional integer overflow:

  overflow_before_widen:
    Potentially overflowing expression 1 << scale with type int
    (32 bits, signed) is evaluated using 32-bit arithmetic, and
    then used in a context that expects an expression of type
    hwaddr (64 bits, unsigned).

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20201030144617.1535064-1-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agodisas/capstone: Fix monitor disassembly of >32 bytes
Peter Maydell [Mon, 2 Nov 2020 16:52:16 +0000 (16:52 +0000)] 
disas/capstone: Fix monitor disassembly of >32 bytes

If we're using the capstone disassembler, disassembly of a run of
instructions more than 32 bytes long disassembles the wrong data for
instructions beyond the 32 byte mark:

(qemu) xp /16x 0x100
0000000000000100: 0x00000005 0x54410001 0x00000001 0x00001000
0000000000000110: 0x00000000 0x00000004 0x54410002 0x3c000000
0000000000000120: 0x00000000 0x00000004 0x54410009 0x74736574
0000000000000130: 0x00000000 0x00000000 0x00000000 0x00000000
(qemu) xp /16i 0x100
0x00000100: 00000005 andeq r0, r0, r5
0x00000104: 54410001 strbpl r0, [r1], #-1
0x00000108: 00000001 andeq r0, r0, r1
0x0000010c: 00001000 andeq r1, r0, r0
0x00000110: 00000000 andeq r0, r0, r0
0x00000114: 00000004 andeq r0, r0, r4
0x00000118: 54410002 strbpl r0, [r1], #-2
0x0000011c: 3c000000 .byte 0x00, 0x00, 0x00, 0x3c
0x00000120: 54410001 strbpl r0, [r1], #-1
0x00000124: 00000001 andeq r0, r0, r1
0x00000128: 00001000 andeq r1, r0, r0
0x0000012c: 00000000 andeq r0, r0, r0
0x00000130: 00000004 andeq r0, r0, r4
0x00000134: 54410002 strbpl r0, [r1], #-2
0x00000138: 3c000000 .byte 0x00, 0x00, 0x00, 0x3c
0x0000013c: 00000000 andeq r0, r0, r0

Here the disassembly of 0x120..0x13f is using the data that is in
0x104..0x123.

This is caused by passing the wrong value to the read_memory_func().
The intention is that at this point in the loop the 'cap_buf' buffer
already contains 'csize' bytes of data for the instruction at guest
addr 'pc', and we want to read in an extra 'tsize' bytes.  Those
extra bytes are therefore at 'pc + csize', not 'pc'.  On the first
time through the loop 'csize' happens to be zero, so the initial read
of 32 bytes into cap_buf is correct and as long as the disassembly
never needs to read more data we return the correct information.

Use the correct guest address in the call to read_memory_func().

Cc: qemu-stable@nongnu.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1900779
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201022132445.25039-1-peter.maydell@linaro.org

2 months agotarget/arm: fix LORID_EL1 access check
Rémi Denis-Courmont [Mon, 2 Nov 2020 16:52:16 +0000 (16:52 +0000)] 
target/arm: fix LORID_EL1 access check

Secure mode is not exempted from checking SCR_EL3.TLOR, and in the
future HCR_EL2.TLOR when S-EL2 is enabled.

Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agotarget/arm: fix handling of HCR.FB
Rémi Denis-Courmont [Mon, 2 Nov 2020 16:52:15 +0000 (16:52 +0000)] 
target/arm: fix handling of HCR.FB

HCR should be applied when NS is set, not when it is cleared.

Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agotarget/arm: Fix VUDOT/VSDOT (scalar) on big-endian hosts
Peter Maydell [Mon, 2 Nov 2020 16:52:15 +0000 (16:52 +0000)] 
target/arm: Fix VUDOT/VSDOT (scalar) on big-endian hosts

The helper functions for performing the udot/sdot operations against
a scalar were not using an address-swizzling macro when converting
the index of the scalar element into a pointer into the vm array.
This had no effect on little-endian hosts but meant we generated
incorrect results on big-endian hosts.

For these insns, the index is indexing over group of 4 8-bit values,
so 32 bits per indexed entity, and H4() is therefore what we want.
(For Neon the only possible input indexes are 0 and 1.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201028191712.4910-3-peter.maydell@linaro.org

2 months agotarget/arm: Fix float16 pairwise Neon ops on big-endian hosts
Peter Maydell [Mon, 2 Nov 2020 16:52:15 +0000 (16:52 +0000)] 
target/arm: Fix float16 pairwise Neon ops on big-endian hosts

In the neon_padd/pmax/pmin helpers for float16, a cut-and-paste error
meant we were using the H4() address swizzler macro rather than the
H2() which is required for 2-byte data.  This had no effect on
little-endian hosts but meant we put the result data into the
destination Dreg in the wrong order on big-endian hosts.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201028191712.4910-2-peter.maydell@linaro.org

2 months agotarget/arm: Improve do_prewiden_3d
Richard Henderson [Mon, 2 Nov 2020 16:52:15 +0000 (16:52 +0000)] 
target/arm: Improve do_prewiden_3d

We can use proper widening loads to extend 32-bit inputs,
and skip the "widenfn" step.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agotarget/arm: Simplify do_long_3d and do_2scalar_long
Richard Henderson [Mon, 2 Nov 2020 16:52:15 +0000 (16:52 +0000)] 
target/arm: Simplify do_long_3d and do_2scalar_long

In both cases, we can sink the write-back and perform
the accumulate into the normal destination temps.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agotarget/arm: Rename neon_load_reg64 to vfp_load_reg64
Richard Henderson [Mon, 2 Nov 2020 16:52:14 +0000 (16:52 +0000)] 
target/arm: Rename neon_load_reg64 to vfp_load_reg64

The only uses of this function are for loading VFP
double-precision values, and nothing to do with NEON.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agotarget/arm: Add read/write_neon_element64
Richard Henderson [Mon, 2 Nov 2020 16:52:14 +0000 (16:52 +0000)] 
target/arm: Add read/write_neon_element64

Replace all uses of neon_load/store_reg64 within translate-neon.c.inc.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agotarget/arm: Rename neon_load_reg32 to vfp_load_reg32
Richard Henderson [Mon, 2 Nov 2020 16:52:14 +0000 (16:52 +0000)] 
target/arm: Rename neon_load_reg32 to vfp_load_reg32

The only uses of this function are for loading VFP
single-precision values, and nothing to do with NEON.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agotarget/arm: Expand read/write_neon_element32 to all MemOp
Richard Henderson [Mon, 2 Nov 2020 16:52:14 +0000 (16:52 +0000)] 
target/arm: Expand read/write_neon_element32 to all MemOp

We can then use this to improve VMOV (scalar to gp) and
VMOV (gp to scalar) so that we simply perform the memory
operation that we wanted, rather than inserting or
extracting from a 32-bit quantity.

These were the last uses of neon_load/store_reg, so remove them.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agotarget/arm: Add read/write_neon_element32
Richard Henderson [Mon, 2 Nov 2020 16:52:13 +0000 (16:52 +0000)] 
target/arm: Add read/write_neon_element32

Model these off the aa64 read/write_vec_element functions.
Use it within translate-neon.c.inc.  The new functions do
not allocate or free temps, so this rearranges the calling
code a bit.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agotarget/arm: Use neon_element_offset in vfp_reg_offset
Richard Henderson [Mon, 2 Nov 2020 16:52:13 +0000 (16:52 +0000)] 
target/arm: Use neon_element_offset in vfp_reg_offset

This seems a bit more readable than using offsetof CPU_DoubleU.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agotarget/arm: Use neon_element_offset in neon_load/store_reg
Richard Henderson [Mon, 2 Nov 2020 16:52:13 +0000 (16:52 +0000)] 
target/arm: Use neon_element_offset in neon_load/store_reg

These are the only users of neon_reg_offset, so remove that.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agotarget/arm: Move neon_element_offset to translate.c
Richard Henderson [Mon, 2 Nov 2020 16:52:13 +0000 (16:52 +0000)] 
target/arm: Move neon_element_offset to translate.c

This will shortly have users outside of translate-neon.c.inc.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agotarget/arm: Introduce neon_full_reg_offset
Richard Henderson [Mon, 2 Nov 2020 16:52:12 +0000 (16:52 +0000)] 
target/arm: Introduce neon_full_reg_offset

This function makes it clear that we're talking about the whole
register, and not the 32-bit piece at index 0.  This fixes a bug
when running on a big-endian host.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agoMerge remote-tracking branch 'remotes/aperard/tags/pull-xen-20201102' into staging
Peter Maydell [Mon, 2 Nov 2020 16:05:47 +0000 (16:05 +0000)] 
Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20201102' into staging

xen patch

- Rework Xen disk unplug to work with newer command line
  options.

# gpg: Signature made Mon 02 Nov 2020 14:42:37 GMT
# gpg:                using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF
# gpg:                issuer "anthony.perard@citrix.com"
# gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [marginal]
# gpg:                 aka "Anthony PERARD <anthony.perard@citrix.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5379 2F71 024C 600F 778A  7161 D8D5 7199 DF83 42C8
#      Subkey fingerprint: F80C 0063 08E2 2CFD 8A92  E798 0CF5 572F D7FB 55AF

* remotes/aperard/tags/pull-xen-20201102:
  xen: rework pci_piix3_xen_ide_unplug

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agoqga: add command guest-get-disks
Tomáš Golembiovský [Mon, 12 Oct 2020 08:36:01 +0000 (10:36 +0200)] 
qga: add command guest-get-disks

Add API and stubs for new guest-get-disks command.

The command guest-get-fsinfo can be used to list information about disks
and partitions but it is limited only to mounted disks with filesystem.
This new command should allow listing information about disks of the VM
regardles whether they are mounted or not. This can be usefull for
management applications for mapping virtualized devices or pass-through
devices to device names in the guest OS.

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
2 months agoqga: Flatten simple union GuestDeviceId
Markus Armbruster [Wed, 21 Oct 2020 07:15:20 +0000 (09:15 +0200)] 
qga: Flatten simple union GuestDeviceId

Simple unions are simpler than flat unions in the schema, but more
complicated in C and on the QMP wire: there's extra indirection in C
and extra nesting on the wire, both pointless.  They should be avoided
in new code.

GuestDeviceId was recently added for guest-get-devices.  Convert it to
a flat union.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
2 months agoqga-win: Fix guest-get-devices error API violations
Markus Armbruster [Wed, 21 Oct 2020 07:15:19 +0000 (09:15 +0200)] 
qga-win: Fix guest-get-devices error API violations

The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

qmp_guest_get_devices() is wrong that way: it calls error_setg() in a
loop.

If no iteration fails, the function returns a value and sets no error.
Okay.

If exactly one iteration fails, the function returns a value and sets
an error.  Wrong.

If multiple iterations fail, the function trips error_setv()'s
assertion.

Fix it to return immediately on error.

Perhaps the failure to convert the driver version to UTF-8 should not
be an error.  We could simply not report the botched version string
instead.

Drop a superfluous continue while there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
2 months agoqga: Use common time encoding for guest-get-devices 'driver-date'
Markus Armbruster [Wed, 21 Oct 2020 07:15:18 +0000 (09:15 +0200)] 
qga: Use common time encoding for guest-get-devices 'driver-date'

guest-get-devices returns 'driver-date' as string in the format
YYYY-MM-DD.  Goes back to recent commit 2e4211cee4 "qga: add command
guest-get-devices for reporting VirtIO devices".

We should avoid use of multiple encodings for the same kind of data.
Especially string encodings.  Change it to return nanoseconds since
the epoch, like guest-get-time does.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
2 months agoqga: Rename guest-get-devices return member 'address' to 'id'
Markus Armbruster [Wed, 21 Oct 2020 07:15:17 +0000 (09:15 +0200)] 
qga: Rename guest-get-devices return member 'address' to 'id'

Member 'address' is union GuestDeviceAddress with a single branch
GuestDeviceAddressPCI, containing PCI vendor ID and device ID.  This
is not a PCI address.  Type GuestPCIAddress is.  Messed up in recent
commit 2e4211cee4 "qga: add command guest-get-devices for reporting
VirtIO devices".

Rename type GuestDeviceAddressPCI to GuestDeviceIdPCI, type
GuestDeviceAddress to GuestDeviceId, and member 'address' to 'id'.

Document the member properly while there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
2 months agoxen: rework pci_piix3_xen_ide_unplug
Anthony PERARD [Tue, 27 Oct 2020 15:40:58 +0000 (15:40 +0000)] 
xen: rework pci_piix3_xen_ide_unplug

This is to allow IDE disks to be unplugged when adding to QEMU via:
    -drive file=/root/disk_file,if=none,id=ide-disk0,format=raw
    -device ide-hd,drive=ide-disk0,bus=ide.0,unit=0

as the current code only works for disk added with:
    -drive file=/root/disk_file,if=ide,index=0,media=disk,format=raw

Since the code already have the IDE controller as `dev`, we don't need
to use the legacy DriveInfo to find all the drive we want to unplug.
We can simply use `blk` from the controller, as it kind of was already
assume to be the same, by setting it to NULL.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20201027154058.495112-1-anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2 months agoMerge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20201102' into staging
Peter Maydell [Mon, 2 Nov 2020 10:57:48 +0000 (10:57 +0000)] 
Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20201102' into staging

9pfs: only test case changes this time

* Fix occasional test failures with parallel tests.

* Fix coverity error in test code.

* Avoid error when auto removing test directory if it disappeared
  for some reason.

* Refactor: Rename functions to make top-level test functions fs_*()
  easily distinguishable from utility test functions do_*().

* Refactor: Drop unnecessary function arguments in utility test
  functions.

* More test cases using the 9pfs 'local' filesystem driver backend,
  namely for the following 9p requests: Tunlinkat, Tlcreate, Tsymlink
  and Tlink.

# gpg: Signature made Mon 02 Nov 2020 09:31:35 GMT
# gpg:                using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg:                issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38  4926 30DB 47C3 A012 D5F4
#      Subkey fingerprint: 96D8 D110 CF7A F808 4F88  5901 34C2 B587 65A4 7395

* remotes/cschoenebeck/tags/pull-9p-20201102:
  tests/9pfs: add local Tunlinkat hard link test
  tests/9pfs: add local Tlink test
  tests/9pfs: add local Tunlinkat symlink test
  tests/9pfs: add local Tsymlink test
  tests/9pfs: add local Tunlinkat file test
  tests/9pfs: add local Tlcreate test
  tests/9pfs: add local Tunlinkat directory test
  tests/9pfs: simplify do_mkdir()
  tests/9pfs: Turn fs_mkdir() into a helper
  tests/9pfs: Turn fs_readdir_split() into a helper
  tests/9pfs: Factor out do_attach() helper
  tests/9pfs: Set alloc in fs_create_dir()
  tests/9pfs: Factor out do_version() helper
  tests/9pfs: Force removing of local 9pfs test directory
  tests/9pfs: fix coverity error in create_local_test_dir()
  tests/9pfs: fix test dir for parallel tests
  tests/9pfs: make create/remove test dir public

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agoMerge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20201101.0' into...
Peter Maydell [Mon, 2 Nov 2020 09:54:00 +0000 (09:54 +0000)] 
Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20201101.0' into staging

VFIO update 2020-11-01

 * Migration support (Kirti Wankhede)
 * s390 DMA limiting (Matthew Rosato)
 * zPCI hardware info (Matthew Rosato)
 * Lock guard (Amey Narkhede)
 * Print fixes (Zhengui li)
 * Warning/build fixes

# gpg: Signature made Sun 01 Nov 2020 20:38:10 GMT
# gpg:                using RSA key 239B9B6E3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full]
# gpg:                 aka "Alex Williamson <alex@shazbot.org>" [full]
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>" [full]
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>" [full]
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B  8A90 239B 9B6E 3BB0 8B22

* remotes/awilliam/tags/vfio-update-20201101.0: (32 commits)
  vfio: fix incorrect print type
  hw/vfio: Use lock guard macros
  s390x/pci: get zPCI function info from host
  vfio: Add routine for finding VFIO_DEVICE_GET_INFO capabilities
  s390x/pci: use a PCI Function structure
  s390x/pci: clean up s390 PCI groups
  s390x/pci: use a PCI Group structure
  s390x/pci: create a header dedicated to PCI CLP
  s390x/pci: Honor DMA limits set by vfio
  s390x/pci: Add routine to get the vfio dma available count
  vfio: Find DMA available capability
  vfio: Create shared routine for scanning info capabilities
  s390x/pci: Move header files to include/hw/s390x
  linux-headers: update against 5.10-rc1
  update-linux-headers: Add vfio_zdev.h
  qapi: Add VFIO devices migration stats in Migration stats
  vfio: Make vfio-pci device migration capable
  vfio: Add ioctl to get dirty pages bitmap during dma unmap
  vfio: Dirty page tracking when vIOMMU is enabled
  vfio: Add vfio_listener_log_sync to mark dirty pages
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2 months agovfio: fix incorrect print type
Zhengui li [Mon, 19 Oct 2020 14:23:46 +0000 (14:23 +0000)] 
vfio: fix incorrect print type

The type of input variable is unsigned int
while the printer type is int. So fix incorrect print type.

Signed-off-by: Zhengui li <lizhengui@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2 months agohw/vfio: Use lock guard macros
Amey Narkhede [Fri, 23 Oct 2020 12:43:42 +0000 (18:13 +0530)] 
hw/vfio: Use lock guard macros

Use qemu LOCK_GUARD macros in hw/vfio.
Saves manual unlock calls

Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>