Makefile

   1 #
   2 # (C) Copyright 2000-2010
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # See file CREDITS for list of people who contributed to this
   6 # project.
   7 #
   8 # This program is free software; you can redistribute it and/or
   9 # modify it under the terms of the GNU General Public License as
  10 # published by the Free Software Foundatio; either version 2 of
  11 # the License, or (at your option) any later version.
  12 #
  13 # This program is distributed in the hope that it will be useful,
  14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 # GNU General Public License for more details.
  17 #
  18 # You should have received a copy of the GNU General Public License
  19 # along with this program; if not, write to the Free Software
  20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 # MA 02111-1307 USA
  22 #
  23
  24 VERSION = 2010
  25 PATCHLEVEL = 06
  26 SUBLEVEL = 05
  27 EXTRAVERSION =
  28 ifneq "$(SUBLEVEL)" ""
  29 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
  30 else
  31 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
  32 endif
  33 TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
  34 VERSION_FILE = $(obj)include/version_autogenerated.h
  35
  36 HOSTARCH := $(shell uname -m | \
  37         sed -e s/i.86/i386/ \
  38             -e s/sun4u/sparc64/ \
  39             -e s/arm.*/arm/ \
  40             -e s/sa110/arm/ \
  41             -e s/ppc64/powerpc/ \
  42             -e s/ppc/powerpc/ \
  43             -e s/macppc/powerpc/)
  44
  45 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  46             sed -e 's/\(cygwin\).*/cygwin/')
  47
  48 # Set shell to bash if possible, otherwise fall back to sh
  49 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  50         else if [ -x /bin/bash ]; then echo /bin/bash; \
  51         else echo sh; fi; fi)
  52
  53 export  HOSTARCH HOSTOS SHELL
  54
  55 # Deal with colliding definitions from tcsh etc.
  56 VENDOR=
  57
  58 #########################################################################
  59 # Allow for silent builds
  60 ifeq (,$(findstring s,$(MAKEFLAGS)))
  61 XECHO = echo
  62 else
  63 XECHO = :
  64 endif
  65
  66 #########################################################################
  67 #
  68 # U-boot build supports producing a object files to the separate external
  69 # directory. Two use cases are supported:
  70 #
  71 # 1) Add O= to the make command line
  72 # 'make O=/tmp/build all'
  73 #
  74 # 2) Set environement variable BUILD_DIR to point to the desired location
  75 # 'export BUILD_DIR=/tmp/build'
  76 # 'make'
  77 #
  78 # The second approach can also be used with a MAKEALL script
  79 # 'export BUILD_DIR=/tmp/build'
  80 # './MAKEALL'
  81 #
  82 # Command line 'O=' setting overrides BUILD_DIR environent variable.
  83 #
  84 # When none of the above methods is used the local build is performed and
  85 # the object files are placed in the source directory.
  86 #
  87
  88 ifdef O
  89 ifeq ("$(origin O)", "command line")
  90 BUILD_DIR := $(O)
  91 endif
  92 endif
  93
  94 ifneq ($(BUILD_DIR),)
  95 saved-output := $(BUILD_DIR)
  96
  97 # Attempt to create a output directory.
  98 $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
  99
 100 # Verify if it was successful.
 101 BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
 102 $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
 103 endif # ifneq ($(BUILD_DIR),)
 104
 105 OBJTREE         := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
 106 SRCTREE         := $(CURDIR)
 107 TOPDIR          := $(SRCTREE)
 108 LNDIR           := $(OBJTREE)
 109 export  TOPDIR SRCTREE OBJTREE
 110
 111 MKCONFIG        := $(SRCTREE)/mkconfig
 112 export MKCONFIG
 113
 114 ifneq ($(OBJTREE),$(SRCTREE))
 115 REMOTE_BUILD    := 1
 116 export REMOTE_BUILD
 117 endif
 118
 119 # $(obj) and (src) are defined in config.mk but here in main Makefile
 120 # we also need them before config.mk is included which is the case for
 121 # some targets like unconfig, clean, clobber, distclean, etc.
 122 ifneq ($(OBJTREE),$(SRCTREE))
 123 obj := $(OBJTREE)/
 124 src := $(SRCTREE)/
 125 else
 126 obj :=
 127 src :=
 128 endif
 129 export obj src
 130
 131 # Make sure CDPATH settings don't interfere
 132 unexport CDPATH
 133
 134 #########################################################################
 135
 136 # The "tools" are needed early, so put this first
 137 # Don't include stuff already done in $(LIBS)
 138 SUBDIRS = tools \
 139 #         examples/standalone \
 140 #         examples/api
 141
 142 .PHONY : $(SUBDIRS)
 143
 144 ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
 145
 146 # Include autoconf.mk before config.mk so that the config options are available
 147 # to all top level build files.  We need the dummy all: target to prevent the
 148 # dependency target in autoconf.mk.dep from being the default.
 149 all:
 150 sinclude $(obj)include/autoconf.mk.dep
 151 sinclude $(obj)include/autoconf.mk
 152
 153 # load ARCH, BOARD, and CPU configuration
 154 include $(obj)include/config.mk
 155 export  ARCH CPU BOARD VENDOR SOC
 156
 157 # set default to nothing for native builds
 158 ifeq ($(HOSTARCH),$(ARCH))
 159 CROSS_COMPILE ?=
 160 endif
 161
 162 # load other configuration
 163 include $(TOPDIR)/config.mk
 164
 165 #########################################################################
 166 # U-Boot objects....order is important (i.e. start must be first)
 167
 168 OBJS  = $(CPUDIR)/start.o
 169 ifeq ($(CPU),i386)
 170 OBJS += $(CPUDIR)/start16.o
 171 OBJS += $(CPUDIR)/resetvec.o
 172 endif
 173 ifeq ($(CPU),ppc4xx)
 174 OBJS += $(CPUDIR)/resetvec.o
 175 endif
 176 ifeq ($(CPU),mpc85xx)
 177 OBJS += $(CPUDIR)/resetvec.o
 178 endif
 179
 180 OBJS := $(addprefix $(obj),$(OBJS))
 181
 182 LIBS  = lib/libgeneric.a
 183 LIBS += lib/lzma/liblzma.a
 184 LIBS += lib/lzo/liblzo.a
 185 LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
 186         "board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
 187 LIBS += $(CPUDIR)/lib$(CPU).a
 188 ifdef SOC
 189 LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).a
 190 endif
 191 ifeq ($(CPU),ixp)
 192 LIBS += arch/arm/cpu/ixp/npe/libnpe.a
 193 endif
 194 LIBS += arch/$(ARCH)/lib/lib$(ARCH).a
 195 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
 196         fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
 197         fs/ubifs/libubifs.a
 198 LIBS += net/libnet.a
 199 LIBS += disk/libdisk.a
 200 LIBS += drivers/bios_emulator/libatibiosemu.a
 201 LIBS += drivers/block/libblock.a
 202 LIBS += drivers/dma/libdma.a
 203 LIBS += drivers/fpga/libfpga.a
 204 LIBS += drivers/gpio/libgpio.a
 205 LIBS += drivers/hwmon/libhwmon.a
 206 LIBS += drivers/i2c/libi2c.a
 207 LIBS += drivers/input/libinput.a
 208 LIBS += drivers/misc/libmisc.a
 209 LIBS += drivers/mmc/libmmc.a
 210 LIBS += drivers/mtd/libmtd.a
 211 LIBS += drivers/mtd/nand/libnand.a
 212 LIBS += drivers/mtd/onenand/libonenand.a
 213 LIBS += drivers/mtd/ubi/libubi.a
 214 LIBS += drivers/mtd/spi/libspi_flash.a
 215 LIBS += drivers/net/libnet.a
 216 LIBS += drivers/net/phy/libphy.a
 217 LIBS += drivers/pci/libpci.a
 218 LIBS += drivers/pcmcia/libpcmcia.a
 219 LIBS += drivers/power/libpower.a
 220 LIBS += drivers/spi/libspi.a
 221 ifeq ($(CPU),mpc83xx)
 222 LIBS += drivers/qe/qe.a
 223 endif
 224 ifeq ($(CPU),mpc85xx)
 225 LIBS += drivers/qe/qe.a
 226 LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a
 227 LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
 228 endif
 229 ifeq ($(CPU),mpc86xx)
 230 LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a
 231 LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
 232 endif
 233 LIBS += drivers/rtc/librtc.a
 234 LIBS += drivers/serial/libserial.a
 235 LIBS += drivers/twserial/libtws.a
 236 LIBS += drivers/usb/gadget/libusb_gadget.a
 237 LIBS += drivers/usb/host/libusb_host.a
 238 LIBS += drivers/usb/musb/libusb_musb.a
 239 LIBS += drivers/usb/phy/libusb_phy.a
 240 LIBS += drivers/video/libvideo.a
 241 LIBS += drivers/watchdog/libwatchdog.a
 242 LIBS += common/libcommon.a
 243 LIBS += lib/libfdt/libfdt.a
 244 LIBS += api/libapi.a
 245 LIBS += post/libpost.a
 246
 247 LIBS := $(addprefix $(obj),$(LIBS))
 248 .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 249
 250 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 251 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
 252
 253 # Add GCC lib
 254 ifdef USE_PRIVATE_LIBGCC
 255 ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
 256 PLATFORM_LIBGCC = -L $(OBJTREE)/arch/$(ARCH)/lib -lgcc
 257 else
 258 PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
 259 endif
 260 else
 261 PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 262 endif
 263 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
 264 export PLATFORM_LIBS
 265
 266 # Special flags for CPP when processing the linker script.
 267 # Pass the version down so we can handle backwards compatibility
 268 # on the fly.
 269 LDPPFLAGS += \
 270         -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
 271         $(shell $(LD) --version | \
 272           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 273
 274 ifeq ($(CONFIG_NAND_U_BOOT),y)
 275 NAND_SPL = nand_spl
 276 U_BOOT_NAND = $(obj)u-boot-nand.bin
 277 endif
 278
 279 ifeq ($(CONFIG_ONENAND_U_BOOT),y)
 280 ONENAND_IPL = onenand_ipl
 281 U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
 282 ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
 283 endif
 284
 285 __OBJS := $(subst $(obj),,$(OBJS))
 286 __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 287
 288 #########################################################################
 289 #########################################################################
 290
 291 # Always append ALL so that arch config.mk's can add custom ones
 292 ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
 293
 294 all:            $(ALL)
 295
 296 $(obj)u-boot.hex:       $(obj)u-boot
 297                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 298
 299 $(obj)u-boot.srec:      $(obj)u-boot
 300                 $(OBJCOPY) -O srec $< $@
 301
 302 $(obj)u-boot.bin:       $(obj)u-boot
 303                 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 304
 305 $(obj)u-boot.ldr:       $(obj)u-boot
 306                 $(CREATE_LDR_ENV)
 307                 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
 308
 309 $(obj)u-boot.ldr.hex:   $(obj)u-boot.ldr
 310                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
 311
 312 $(obj)u-boot.ldr.srec:  $(obj)u-boot.ldr
 313                 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 314
 315 $(obj)u-boot.img:       $(obj)u-boot.bin
 316                 $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
 317                 -a $(TEXT_BASE) -e 0 \
 318                 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 319                         sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
 320                 -d $< $@
 321
 322 $(obj)u-boot.imx:       $(obj)u-boot.bin
 323                 $(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \
 324                 -e $(TEXT_BASE) -d $< $@
 325
 326 $(obj)u-boot.kwb:       $(obj)u-boot.bin
 327                 $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
 328                 -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
 329
 330 $(obj)u-boot.sha1:      $(obj)u-boot.bin
 331                 $(obj)tools/ubsha1 $(obj)u-boot.bin
 332
 333 $(obj)u-boot.dis:       $(obj)u-boot
 334                 $(OBJDUMP) -d $< > $@
 335
 336 GEN_UBOOT = \
 337                 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
 338                 sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 339                 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
 340                         --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 341                         -Map u-boot.map -o u-boot
 342 $(obj)u-boot:   depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
 343                 $(GEN_UBOOT)
 344 ifeq ($(CONFIG_KALLSYMS),y)
 345                 smap=`$(call SYSTEM_MAP,u-boot) | \
 346                         awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
 347                 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
 348                         -c common/system_map.c -o $(obj)common/system_map.o
 349                 $(GEN_UBOOT) $(obj)common/system_map.o
 350 endif
 351
 352 $(OBJS):        depend
 353                 $(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 354
 355 $(LIBS):        depend $(SUBDIRS)
 356                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 357
 358 $(LIBBOARD):    depend $(LIBS)
 359                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 360
 361 $(SUBDIRS):     depend
 362                 $(MAKE) -C $@ all
 363
 364 $(LDSCRIPT):    depend
 365                 $(MAKE) -C $(dir $@) $(notdir $@)
 366
 367 $(obj)u-boot.lds: $(LDSCRIPT)
 368                 $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
 369
 370 $(NAND_SPL):    $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 371                 $(MAKE) -C nand_spl/board/$(BOARDDIR) all
 372
 373 $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
 374                 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 375
 376 $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 377                 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 378
 379 $(U_BOOT_ONENAND):      $(ONENAND_IPL) $(obj)u-boot.bin
 380                 cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
 381
 382 $(VERSION_FILE):
 383                 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
 384                  '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 385                 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 386
 387 $(TIMESTAMP_FILE):
 388                 @LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
 389                 @LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> $@
 390
 391 gdbtools:
 392                 $(MAKE) -C tools/gdb all || exit 1
 393
 394 multiplier:
 395                 $(MAKE) -C tools/multiplier all || exit 1
 396
 397 updater:
 398                 $(MAKE) -C tools/updater all || exit 1
 399
 400 env:
 401                 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 402
 403 # Explicitly make _depend in subdirs containing multiple targets to prevent
 404 # parallel sub-makes creating .depend files simultaneously.
 405 depend dep:     $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 406                 for dir in $(SUBDIRS) $(CPUDIR) $(dir $(LDSCRIPT)) ; do \
 407                         $(MAKE) -C $$dir _depend ; done
 408
 409 TAG_SUBDIRS = $(SUBDIRS)
 410 TAG_SUBDIRS += $(dir $(__LIBS))
 411 TAG_SUBDIRS += include
 412
 413 tags ctags:
 414                 ctags -w -o $(obj)ctags `find $(TAG_SUBDIRS) \
 415                                                 -name '*.[chS]' -print`
 416
 417 etags:
 418                 etags -a -o $(obj)etags `find $(TAG_SUBDIRS) \
 419                                                 -name '*.[chS]' -print`
 420 cscope:
 421                 find $(TAG_SUBDIRS) -name '*.[chS]' -print > cscope.files
 422                 cscope -b -q -k
 423
 424 SYSTEM_MAP = \
 425                 $(NM) $1 | \
 426                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 427                 LC_ALL=C sort
 428 $(obj)System.map:       $(obj)u-boot
 429                 @$(call SYSTEM_MAP,$<) > $(obj)System.map
 430
 431 #
 432 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 433 #
 434 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
 435 # the dep file is only include in this top level makefile to determine when
 436 # to regenerate the autoconf.mk file.
 437 $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
 438         @$(XECHO) Generating $@ ; \
 439         set -e ; \
 440         : Generate the dependancies ; \
 441         $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
 442                 -MQ $(obj)include/autoconf.mk include/common.h > $@
 443
 444 $(obj)include/autoconf.mk: $(obj)include/config.h
 445         @$(XECHO) Generating $@ ; \
 446         set -e ; \
 447         : Extract the config macros ; \
 448         $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
 449                 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
 450         mv $@.tmp $@
 451
 452 #########################################################################
 453 else    # !config.mk
 454 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 455 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
 456 $(filter-out tools,$(SUBDIRS)) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools \
 457 updater env depend dep tags ctags etags cscope $(obj)System.map:
 458         @echo "System not configured - see README" >&2
 459         @ exit 1
 460
 461 tools:
 462         $(MAKE) -C tools
 463 tools-all:
 464         $(MAKE) -C tools HOST_TOOLS_ALL=y
 465 endif   # config.mk
 466
 467 .PHONY : CHANGELOG
 468 CHANGELOG:
 469         git log --no-merges U-Boot-1_1_5.. | \
 470         unexpand -a | sed -e 's/\s\s*$$//' > $@
 471
 472 include/license.h: tools/bin2header COPYING
 473          cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
 474 #########################################################################
 475
 476 unconfig:
 477         @rm -f $(obj)include/config.h $(obj)include/config.mk \
 478                 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
 479                 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
 480
 481 %: %_config
 482         $(MAKE)
 483
 484 #========================================================================
 485 # PowerPC
 486 #========================================================================
 487
 488 #########################################################################
 489 ## MPC5xx Systems
 490 #########################################################################
 491
 492 canmb_config:   unconfig
 493         @$(MKCONFIG) -a canmb powerpc mpc5xxx canmb
 494
 495 cmi_mpc5xx_config:      unconfig
 496         @$(MKCONFIG) $(@:_config=) powerpc mpc5xx cmi
 497
 498 PATI_config:            unconfig
 499         @$(MKCONFIG) $(@:_config=) powerpc mpc5xx pati mpl
 500
 501 #########################################################################
 502 ## MPC5xxx Systems
 503 #########################################################################
 504
 505 aev_config: unconfig
 506         @$(MKCONFIG) -a aev powerpc mpc5xxx tqm5200 tqc
 507
 508 BC3450_config:  unconfig
 509         @$(MKCONFIG) -a BC3450 powerpc mpc5xxx bc3450
 510
 511 cm5200_config:  unconfig
 512         @$(MKCONFIG) -a cm5200 powerpc mpc5xxx cm5200
 513
 514 cpci5200_config:  unconfig
 515         @$(MKCONFIG) -a cpci5200  powerpc mpc5xxx cpci5200 esd
 516
 517 digsy_mtc_config \
 518 digsy_mtc_LOWBOOT_config        \
 519 digsy_mtc_RAMBOOT_config:       unconfig
 520         @mkdir -p $(obj)include
 521         @mkdir -p $(obj)board/digsy_mtc
 522         @ >$(obj)include/config.h
 523         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 524                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
 525                   echo "... with LOWBOOT configuration" ; \
 526                 }
 527         @[ -z "$(findstring RAMBOOT_,$@)" ] || \
 528                 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
 529                   echo "... with RAMBOOT configuration" ; \
 530                 }
 531         @$(MKCONFIG) -a digsy_mtc  powerpc mpc5xxx digsy_mtc
 532
 533 galaxy5200_LOWBOOT_config \
 534 galaxy5200_config:      unconfig
 535         @mkdir -p $(obj)include
 536         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 537         @$(MKCONFIG) -a galaxy5200 powerpc mpc5xxx galaxy5200
 538
 539 hmi1001_config: unconfig
 540         @$(MKCONFIG) hmi1001 powerpc mpc5xxx hmi1001
 541
 542 Lite5200_config                         \
 543 Lite5200_LOWBOOT_config                 \
 544 Lite5200_LOWBOOT08_config               \
 545 icecube_5200_config                     \
 546 icecube_5200_LOWBOOT_config             \
 547 icecube_5200_LOWBOOT08_config           \
 548 icecube_5200_DDR_config                 \
 549 icecube_5200_DDR_LOWBOOT_config         \
 550 icecube_5200_DDR_LOWBOOT08_config:      unconfig
 551         @mkdir -p $(obj)include
 552         @mkdir -p $(obj)board/icecube
 553         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 554                 { if [ "$(findstring DDR,$@)" ] ; \
 555                         then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 556                         else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 557                   fi ; \
 558                   $(XECHO) "... with LOWBOOT configuration" ; \
 559                 }
 560         @[ -z "$(findstring LOWBOOT08,$@)" ] || \
 561                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 562                   echo "... with 8 MB flash only" ; \
 563                   $(XECHO) "... with LOWBOOT configuration" ; \
 564                 }
 565         @[ -z "$(findstring DDR,$@)" ] || \
 566                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 567                   $(XECHO) "... DDR memory revision" ; \
 568                 }
 569         @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube
 570
 571 jupiter_config: unconfig
 572         @$(MKCONFIG) jupiter powerpc mpc5xxx jupiter
 573
 574 inka4x0_config: unconfig
 575         @$(MKCONFIG) inka4x0 powerpc mpc5xxx inka4x0
 576
 577 ipek01_config: unconfig
 578         @$(MKCONFIG) -a ipek01 powerpc mpc5xxx ipek01
 579
 580 lite5200b_config        \
 581 lite5200b_PM_config     \
 582 lite5200b_LOWBOOT_config:       unconfig
 583         @mkdir -p $(obj)include
 584         @mkdir -p $(obj)board/icecube
 585         @ echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h
 586         @ $(XECHO) "... DDR memory revision"
 587         @ echo "#define CONFIG_LITE5200B"       >>$(obj)include/config.h
 588         @[ -z "$(findstring _PM_,$@)" ] || \
 589                 { echo "#define CONFIG_LITE5200B_PM"    >>$(obj)include/config.h ; \
 590                   $(XECHO) "... with power management (low-power mode) support" ; \
 591                 }
 592         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 593                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 594                   $(XECHO) "... with LOWBOOT configuration" ; \
 595                 }
 596         @$(MKCONFIG) -a IceCube  powerpc mpc5xxx icecube
 597
 598 mcc200_config   \
 599 mcc200_SDRAM_config     \
 600 mcc200_highboot_config  \
 601 mcc200_COM12_config     \
 602 mcc200_COM12_SDRAM_config       \
 603 mcc200_COM12_highboot_config    \
 604 mcc200_COM12_highboot_SDRAM_config      \
 605 mcc200_highboot_SDRAM_config    \
 606 prs200_config   \
 607 prs200_DDR_config       \
 608 prs200_highboot_config  \
 609 prs200_highboot_DDR_config:     unconfig
 610         @mkdir -p $(obj)include
 611         @mkdir -p $(obj)board/mcc200
 612         @[ -n "$(findstring highboot,$@)" ] || \
 613                 { $(XECHO) "... with lowboot configuration" ; \
 614                 }
 615         @[ -z "$(findstring highboot,$@)" ] || \
 616                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
 617                   $(XECHO) "... with highboot configuration" ; \
 618                 }
 619         @[ -n "$(findstring _SDRAM,$@)" ] || \
 620                 { if [ -n "$(findstring mcc200,$@)" ]; \
 621                   then \
 622                         $(XECHO) "... with DDR" ; \
 623                   else \
 624                         if [ -n "$(findstring _DDR,$@)" ];\
 625                         then \
 626                                 $(XECHO) "... with DDR" ; \
 627                         else \
 628                                 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
 629                                 $(XECHO) "... with SDRAM" ; \
 630                         fi; \
 631                   fi; \
 632                 }
 633         @[ -z "$(findstring _SDRAM,$@)" ] || \
 634                 { echo "#define CONFIG_MCC200_SDRAM"    >>$(obj)include/config.h ; \
 635                   $(XECHO) "... with SDRAM" ; \
 636                 }
 637         @[ -z "$(findstring COM12,$@)" ] || \
 638                 { echo "#define CONFIG_CONSOLE_COM12"   >>$(obj)include/config.h ; \
 639                   $(XECHO) "... with console on COM12" ; \
 640                 }
 641         @[ -z "$(findstring prs200,$@)" ] || \
 642                 { echo "#define CONFIG_PRS200"  >>$(obj)include/config.h ;\
 643                 }
 644         @$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200
 645
 646 mecp5200_config:  unconfig
 647         @$(MKCONFIG) mecp5200  powerpc mpc5xxx mecp5200 esd
 648
 649 motionpro_config:       unconfig
 650         @$(MKCONFIG) motionpro powerpc mpc5xxx motionpro
 651
 652 mucmc52_config:         unconfig
 653         @$(MKCONFIG) mucmc52 powerpc mpc5xxx mucmc52
 654
 655 munices_config: unconfig
 656         @$(MKCONFIG) munices powerpc mpc5xxx munices
 657
 658 MVBC_P_config: unconfig
 659         @mkdir -p $(obj)include
 660         @mkdir -p $(obj)board/mvbc_p
 661         @ >$(obj)include/config.h
 662         @[ -z "$(findstring MVBC_P,$@)" ] || \
 663         {       echo "#define CONFIG_MVBC_P"    >>$(obj)include/config.h; }
 664         @$(MKCONFIG) -n $@ -a MVBC_P powerpc mpc5xxx mvbc_p matrix_vision
 665
 666 MVSMR_config: unconfig
 667         @mkdir -p $(obj)include
 668         @mkdir -p $(obj)board/matrix_vision/mvsmr
 669         @$(MKCONFIG) $(@:_config=) powerpc mpc5xxx mvsmr matrix_vision
 670
 671 o2dnt_config:   unconfig
 672         @$(MKCONFIG) o2dnt powerpc mpc5xxx o2dnt
 673
 674 pcm030_config \
 675 pcm030_LOWBOOT_config:  unconfig
 676         @mkdir -p $(obj)include $(obj)board/phytec/pcm030
 677         @ >$(obj)include/config.h
 678         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 679                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
 680                   echo "... with LOWBOOT configuration" ; \
 681                 }
 682         @$(MKCONFIG) -a pcm030 powerpc mpc5xxx pcm030 phytec
 683
 684 pf5200_config:  unconfig
 685         @$(MKCONFIG) pf5200  powerpc mpc5xxx pf5200 esd
 686
 687 PM520_config \
 688 PM520_DDR_config \
 689 PM520_ROMBOOT_config \
 690 PM520_ROMBOOT_DDR_config:       unconfig
 691         @mkdir -p $(obj)include
 692         @[ -z "$(findstring DDR,$@)" ] || \
 693                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 694                   $(XECHO) "... DDR memory revision" ; \
 695                 }
 696         @[ -z "$(findstring ROMBOOT,$@)" ] || \
 697                 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
 698                   $(XECHO) "... booting from 8-bit flash" ; \
 699                 }
 700         @$(MKCONFIG) -a PM520 powerpc mpc5xxx pm520
 701
 702 smmaco4_config: unconfig
 703         @$(MKCONFIG) -a smmaco4 powerpc mpc5xxx tqm5200 tqc
 704
 705 spieval_config: unconfig
 706         @$(MKCONFIG) -a spieval powerpc mpc5xxx tqm5200 tqc
 707
 708 TB5200_B_config \
 709 TB5200_config:  unconfig
 710         @mkdir -p $(obj)include
 711         @[ -z "$(findstring _B,$@)" ] || \
 712                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 713                   $(XECHO) "... with MPC5200B processor" ; \
 714                 }
 715         @$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc
 716
 717 MINI5200_config \
 718 EVAL5200_config \
 719 TOP5200_config: unconfig
 720         @mkdir -p $(obj)include
 721         @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 722         @$(MKCONFIG) -n $@ -a TOP5200 powerpc mpc5xxx top5200 emk
 723
 724 Total5200_config                \
 725 Total5200_lowboot_config        \
 726 Total5200_Rev2_config           \
 727 Total5200_Rev2_lowboot_config:  unconfig
 728         @mkdir -p $(obj)include
 729         @mkdir -p $(obj)board/total5200
 730         @[ -n "$(findstring Rev,$@)" ] || \
 731                 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
 732                   $(XECHO) "... revision 1 board" ; \
 733                 }
 734         @[ -z "$(findstring Rev2_,$@)" ] || \
 735                 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
 736                   $(XECHO) "... revision 2 board" ; \
 737                 }
 738         @[ -z "$(findstring lowboot_,$@)" ] || \
 739                 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
 740                   $(XECHO) "... with lowboot configuration" ; \
 741                 }
 742         @$(MKCONFIG) -a Total5200 powerpc mpc5xxx total5200
 743
 744 cam5200_config \
 745 cam5200_niosflash_config \
 746 fo300_config \
 747 MiniFAP_config \
 748 TQM5200S_config \
 749 TQM5200S_HIGHBOOT_config \
 750 TQM5200_B_config \
 751 TQM5200_B_HIGHBOOT_config \
 752 TQM5200_config  \
 753 TQM5200_STK100_config:  unconfig
 754         @mkdir -p $(obj)include
 755         @mkdir -p $(obj)board/tqc/tqm5200
 756         @[ -z "$(findstring cam5200,$@)" ] || \
 757                 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
 758                   echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 759                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 760                   $(XECHO) "... TQM5200S on Cam5200" ; \
 761                 }
 762         @[ -z "$(findstring niosflash,$@)" ] || \
 763                 { echo "#define CONFIG_CAM5200_NIOSFLASH"       >>$(obj)include/config.h ; \
 764                   $(XECHO) "... with NIOS flash driver" ; \
 765                 }
 766         @[ -z "$(findstring fo300,$@)" ] || \
 767                 { echo "#define CONFIG_FO300"   >>$(obj)include/config.h ; \
 768                   $(XECHO) "... TQM5200 on FO300" ; \
 769                 }
 770         @[ -z "$(findstring MiniFAP,$@)" ] || \
 771                 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
 772                   $(XECHO) "... TQM5200_AC on MiniFAP" ; \
 773                 }
 774         @[ -z "$(findstring STK100,$@)" ] || \
 775                 { echo "#define CONFIG_STK52XX_REV100"  >>$(obj)include/config.h ; \
 776                   $(XECHO) "... on a STK52XX.100 base board" ; \
 777                 }
 778         @[ -z "$(findstring TQM5200_B,$@)" ] || \
 779                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 780                 }
 781         @[ -z "$(findstring TQM5200S,$@)" ] || \
 782                 { echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 783                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 784                 }
 785         @[ -z "$(findstring HIGHBOOT,$@)" ] || \
 786                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
 787                 }
 788         @$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc
 789
 790 uc101_config:           unconfig
 791         @$(MKCONFIG) uc101 powerpc mpc5xxx uc101
 792
 793 v38b_config: unconfig
 794         @$(MKCONFIG) -a v38b powerpc mpc5xxx v38b
 795
 796 #########################################################################
 797 ## MPC512x Systems
 798 #########################################################################
 799
 800 aria_config:    unconfig
 801         @$(MKCONFIG) -a aria powerpc mpc512x aria davedenx
 802
 803 mecp5123_config:        unconfig
 804         @$(MKCONFIG) -a mecp5123 powerpc mpc512x mecp5123 esd
 805
 806 mpc5121ads_config \
 807 mpc5121ads_rev2_config  \
 808         : unconfig
 809         @mkdir -p $(obj)include
 810         @if [ "$(findstring rev2,$@)" ] ; then \
 811                 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
 812         fi
 813         @$(MKCONFIG) -a mpc5121ads powerpc mpc512x mpc5121ads freescale
 814
 815 pdm360ng_config:        unconfig
 816         @$(MKCONFIG) -a pdm360ng powerpc mpc512x pdm360ng
 817
 818 #########################################################################
 819 ## MPC8xx Systems
 820 #########################################################################
 821
 822 Adder_config    \
 823 Adder87x_config \
 824 AdderII_config  \
 825         :               unconfig
 826         @mkdir -p $(obj)include
 827         $(if $(findstring AdderII,$@), \
 828         @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
 829         @$(MKCONFIG) -a Adder powerpc mpc8xx adder
 830
 831 AdderUSB_config:        unconfig
 832         @$(MKCONFIG) -a AdderUSB powerpc mpc8xx adder
 833
 834 ADS860_config     \
 835 FADS823_config    \
 836 FADS850SAR_config \
 837 MPC86xADS_config  \
 838 MPC885ADS_config  \
 839 FADS860T_config:        unconfig
 840         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx fads
 841
 842 AMX860_config   :       unconfig
 843         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx amx860 westel
 844
 845 c2mon_config:           unconfig
 846         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx c2mon
 847
 848 CCM_config:             unconfig
 849         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx CCM siemens
 850
 851 cogent_mpc8xx_config:   unconfig
 852         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx cogent
 853
 854 ELPT860_config:         unconfig
 855         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx elpt860 LEOX
 856
 857 EP88x_config:           unconfig
 858         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ep88x
 859
 860 ESTEEM192E_config:      unconfig
 861         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx esteem192e
 862
 863 ETX094_config   :       unconfig
 864         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx etx094
 865
 866 FLAGADM_config: unconfig
 867         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx flagadm
 868
 869 xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
 870
 871 GEN860T_SC_config       \
 872 GEN860T_config: unconfig
 873         @mkdir -p $(obj)include
 874         @[ -z "$(findstring _SC,$@)" ] || \
 875                 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
 876                   $(XECHO) "With reduced H/W feature set (SC)..." ; \
 877                 }
 878         @$(MKCONFIG) -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t
 879
 880 GENIETV_config: unconfig
 881         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx genietv
 882
 883 GTH_config:     unconfig
 884         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx gth
 885
 886 hermes_config   :       unconfig
 887         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx hermes
 888
 889 HMI10_config    :       unconfig
 890         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx tqm8xx tqc
 891
 892 IAD210_config: unconfig
 893         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx IAD210 siemens
 894
 895 xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
 896
 897 ICU862_100MHz_config    \
 898 ICU862_config: unconfig
 899         @mkdir -p $(obj)include
 900         @[ -z "$(findstring _100MHz,$@)" ] || \
 901                 { echo "#define CONFIG_100MHz"  >>$(obj)include/config.h ; \
 902                   $(XECHO) "... with 100MHz system clock" ; \
 903                 }
 904         @$(MKCONFIG) -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862
 905
 906 IP860_config    :       unconfig
 907         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ip860
 908
 909 IVML24_256_config \
 910 IVML24_128_config \
 911 IVML24_config:  unconfig
 912         @mkdir -p $(obj)include
 913         @[ -z "$(findstring IVML24_config,$@)" ] || \
 914                  { echo "#define CONFIG_IVML24_16M"     >>$(obj)include/config.h ; \
 915                  }
 916         @[ -z "$(findstring IVML24_128_config,$@)" ] || \
 917                  { echo "#define CONFIG_IVML24_32M"     >>$(obj)include/config.h ; \
 918                  }
 919         @[ -z "$(findstring IVML24_256_config,$@)" ] || \
 920                  { echo "#define CONFIG_IVML24_64M"     >>$(obj)include/config.h ; \
 921                  }
 922         @$(MKCONFIG) -a IVML24 powerpc mpc8xx ivm
 923
 924 IVMS8_256_config \
 925 IVMS8_128_config \
 926 IVMS8_config:   unconfig
 927         @mkdir -p $(obj)include
 928         @[ -z "$(findstring IVMS8_config,$@)" ] || \
 929                  { echo "#define CONFIG_IVMS8_16M"      >>$(obj)include/config.h ; \
 930                  }
 931         @[ -z "$(findstring IVMS8_128_config,$@)" ] || \
 932                  { echo "#define CONFIG_IVMS8_32M"      >>$(obj)include/config.h ; \
 933                  }
 934         @[ -z "$(findstring IVMS8_256_config,$@)" ] || \
 935                  { echo "#define CONFIG_IVMS8_64M"      >>$(obj)include/config.h ; \
 936                  }
 937         @$(MKCONFIG) -a IVMS8 powerpc mpc8xx ivm
 938
 939 kmsupx4_config:         unconfig
 940         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile
 941
 942 KUP4K_config    :       unconfig
 943         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx kup4k kup
 944
 945 KUP4X_config    :       unconfig
 946         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx kup4x kup
 947
 948 LANTEC_config   :       unconfig
 949         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx lantec
 950
 951 lwmon_config:           unconfig
 952         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx lwmon
 953
 954 MBX_config      \
 955 MBX860T_config: unconfig
 956         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mbx8xx
 957
 958 mgsuvd_config:          unconfig
 959         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile
 960
 961 MHPC_config:            unconfig
 962         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mhpc eltec
 963
 964 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
 965
 966 NETVIA_V2_config \
 967 NETVIA_config:          unconfig
 968         @mkdir -p $(obj)include
 969         @[ -z "$(findstring NETVIA_config,$@)" ] || \
 970                  { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
 971                   $(XECHO) "... Version 1" ; \
 972                  }
 973         @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
 974                  { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
 975                   $(XECHO) "... Version 2" ; \
 976                  }
 977         @$(MKCONFIG) -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia
 978
 979 xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
 980
 981 NETPHONE_V2_config \
 982 NETPHONE_config:        unconfig
 983         @mkdir -p $(obj)include
 984         @[ -z "$(findstring NETPHONE_config,$@)" ] || \
 985                  { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
 986                  }
 987         @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
 988                  { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
 989                  }
 990         @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone
 991
 992 xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
 993
 994 NETTA_ISDN_6412_SWAPHOOK_config \
 995 NETTA_ISDN_SWAPHOOK_config \
 996 NETTA_6412_SWAPHOOK_config \
 997 NETTA_SWAPHOOK_config \
 998 NETTA_ISDN_6412_config \
 999 NETTA_ISDN_config \
1000 NETTA_6412_config \
1001 NETTA_config:           unconfig
1002         @mkdir -p $(obj)include
1003         @[ -z "$(findstring ISDN_,$@)" ] || \
1004                  { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
1005                  }
1006         @[ -n "$(findstring ISDN_,$@)" ] || \
1007                  { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
1008                  }
1009         @[ -z "$(findstring 6412_,$@)" ] || \
1010                  { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
1011                  }
1012         @[ -n "$(findstring 6412_,$@)" ] || \
1013                  { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
1014                  }
1015         @[ -z "$(findstring SWAPHOOK_,$@)" ] || \
1016                  { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
1017                  }
1018         @[ -n "$(findstring SWAPHOOK_,$@)" ] || \
1019                  { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
1020                  }
1021         @$(MKCONFIG) -a $(call xtract_NETTA,$@) powerpc mpc8xx netta
1022
1023 xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
1024
1025 NETTA2_V2_config \
1026 NETTA2_config:          unconfig
1027         @mkdir -p $(obj)include
1028         @[ -z "$(findstring NETTA2_config,$@)" ] || \
1029                  { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
1030                  }
1031         @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
1032                  { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
1033                  }
1034         @$(MKCONFIG) -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2
1035
1036 NC650_Rev1_config \
1037 NC650_Rev2_config \
1038 CP850_config:   unconfig
1039         @mkdir -p $(obj)include
1040         @[ -z "$(findstring CP850,$@)" ] || \
1041                  { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
1042                    echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1043                  }
1044         @[ -z "$(findstring Rev1,$@)" ] || \
1045                  { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
1046                  }
1047         @[ -z "$(findstring Rev2,$@)" ] || \
1048                  { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1049                  }
1050         @$(MKCONFIG) -a NC650 powerpc mpc8xx nc650
1051
1052 NX823_config:           unconfig
1053         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx nx823
1054
1055 pcu_e_config:           unconfig
1056         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx pcu_e siemens
1057
1058 QS850_config:   unconfig
1059         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs850 snmc
1060
1061 QS823_config:   unconfig
1062         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs850 snmc
1063
1064 QS860T_config:  unconfig
1065         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs860t snmc
1066
1067 quantum_config: unconfig
1068         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx quantum
1069
1070 R360MPI_config: unconfig
1071         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx r360mpi
1072
1073 RBC823_config:  unconfig
1074         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rbc823
1075
1076 RPXClassic_config:      unconfig
1077         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RPXClassic
1078
1079 RPXlite_config:         unconfig
1080         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RPXlite
1081
1082 RPXlite_DW_64_config            \
1083 RPXlite_DW_LCD_config           \
1084 RPXlite_DW_64_LCD_config        \
1085 RPXlite_DW_NVRAM_config         \
1086 RPXlite_DW_NVRAM_64_config      \
1087 RPXlite_DW_NVRAM_LCD_config     \
1088 RPXlite_DW_NVRAM_64_LCD_config  \
1089 RPXlite_DW_config:      unconfig
1090         @mkdir -p $(obj)include
1091         @[ -z "$(findstring _64,$@)" ] || \
1092                 { echo "#define RPXlite_64MHz"          >>$(obj)include/config.h ; \
1093                   $(XECHO) "... with 64MHz system clock ..."; \
1094                 }
1095         @[ -z "$(findstring _LCD,$@)" ] || \
1096                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1097                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1098                   $(XECHO) "... with LCD display ..."; \
1099                 }
1100         @[ -z "$(findstring _NVRAM,$@)" ] || \
1101                 { echo "#define  CONFIG_ENV_IS_IN_NVRAM"        >>$(obj)include/config.h ; \
1102                   $(XECHO) "... with ENV in NVRAM ..."; \
1103                 }
1104         @$(MKCONFIG) -a RPXlite_DW powerpc mpc8xx RPXlite_dw
1105
1106 rmu_config:     unconfig
1107         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rmu
1108
1109 RRvision_config:        unconfig
1110         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RRvision
1111
1112 RRvision_LCD_config:    unconfig
1113         @mkdir -p $(obj)include
1114         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1115         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1116         @$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision
1117
1118 SM850_config    :       unconfig
1119         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx tqm8xx tqc
1120
1121 spc1920_config:         unconfig
1122         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx spc1920
1123
1124 SPD823TS_config:        unconfig
1125         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx spd8xx
1126
1127 stxxtc_config:  unconfig
1128         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx stxxtc stx
1129
1130 svm_sc8xx_config:       unconfig
1131         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx svm_sc8xx
1132
1133 SXNI855T_config:        unconfig
1134         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx sixnet
1135
1136 # EMK MPC8xx based modules
1137 TOP860_config:          unconfig
1138         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx top860 emk
1139
1140 # Play some tricks for configuration selection
1141 # Only 855 and 860 boards may come with FEC
1142 # and only 823 boards may have LCD support
1143 xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
1144
1145 FPS850L_config          \
1146 FPS860L_config          \
1147 NSCU_config             \
1148 TQM823L_config          \
1149 TQM823L_LCD_config      \
1150 TQM850L_config          \
1151 TQM855L_config          \
1152 TQM860L_config          \
1153 TQM862L_config          \
1154 TQM823M_config          \
1155 TQM850M_config          \
1156 TQM855M_config          \
1157 TQM860M_config          \
1158 TQM862M_config          \
1159 TQM866M_config          \
1160 TQM885D_config          \
1161 TK885D_config           \
1162 virtlab2_config:        unconfig
1163         @mkdir -p $(obj)include
1164         @[ -z "$(findstring _LCD,$@)" ] || \
1165                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1166                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1167                   $(XECHO) "... with LCD display" ; \
1168                 }
1169         @$(MKCONFIG) -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc
1170
1171 TTTech_config:  unconfig
1172         @mkdir -p $(obj)include
1173         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1174         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1175         @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
1176
1177 uc100_config    :       unconfig
1178         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx uc100
1179
1180 v37_config:     unconfig
1181         @mkdir -p $(obj)include
1182         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1183         @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
1184         @$(MKCONFIG) $(@:_config=) powerpc mpc8xx v37
1185
1186 wtk_config:     unconfig
1187         @mkdir -p $(obj)include
1188         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1189         @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
1190         @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
1191
1192 #########################################################################
1193 ## PPC4xx Systems
1194 #########################################################################
1195 xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
1196
1197 acadia_config:  unconfig
1198         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx acadia amcc
1199
1200 acadia_nand_config:     unconfig
1201         @mkdir -p $(obj)include $(obj)board/amcc/acadia
1202         @mkdir -p $(obj)nand_spl/board/amcc/acadia
1203         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1204         @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc
1205         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
1206         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1207
1208 ADCIOP_config:  unconfig
1209         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx adciop esd
1210
1211 alpr_config:    unconfig
1212         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx alpr prodrive
1213
1214 AP1000_config:unconfig
1215         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ap1000 amirix
1216
1217 APC405_config:  unconfig
1218         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx apc405 esd
1219
1220 AR405_config:   unconfig
1221         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ar405 esd
1222
1223 ASH405_config:  unconfig
1224         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ash405 esd
1225
1226 bamboo_config:  unconfig
1227         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx bamboo amcc
1228
1229 bamboo_nand_config:     unconfig
1230         @mkdir -p $(obj)include $(obj)board/amcc/bamboo
1231         @mkdir -p $(obj)nand_spl/board/amcc/bamboo
1232         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1233         @$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc
1234         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
1235         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1236
1237 bubinga_config: unconfig
1238         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx bubinga amcc
1239
1240 CANBT_config:   unconfig
1241         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx canbt esd
1242
1243 # Arches, Canyonlands & Glacier use different U-Boot images
1244 arches_config \
1245 canyonlands_config \
1246 glacier_config: unconfig
1247         @mkdir -p $(obj)include
1248         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1249                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1250         @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
1251
1252 canyonlands_nand_config \
1253 glacier_nand_config:    unconfig
1254         @mkdir -p $(obj)include $(obj)board/amcc/canyonlands
1255         @mkdir -p $(obj)nand_spl/board/amcc/canyonlands
1256         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1257         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
1258                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1259         @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
1260         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
1261         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1262
1263 CATcenter_config        \
1264 CATcenter_25_config     \
1265 CATcenter_33_config:    unconfig
1266         @mkdir -p $(obj)include
1267         @ echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
1268         @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
1269         @[ -z "$(findstring _25,$@)" ] || \
1270                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
1271                   $(XECHO) "SysClk = 25MHz" ; \
1272                 }
1273         @[ -z "$(findstring _33,$@)" ] || \
1274                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
1275                   $(XECHO) "SysClk = 33MHz" ; \
1276                 }
1277         @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave
1278
1279 CMS700_config:  unconfig
1280         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cms700 esd
1281
1282 CPCI2DP_config: unconfig
1283         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci2dp esd
1284
1285 CPCI405_config          \
1286 CPCI4052_config         \
1287 CPCI405DT_config        \
1288 CPCI405AB_config:       unconfig
1289         @mkdir -p $(obj)board/esd/cpci405
1290         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci405 esd
1291
1292 CPCIISER4_config:       unconfig
1293         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpciiser4 esd
1294
1295 CRAYL1_config:  unconfig
1296         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx L1 cray
1297
1298 csb272_config:  unconfig
1299         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx csb272
1300
1301 csb472_config:  unconfig
1302         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx csb472
1303
1304 DASA_SIM_config: unconfig
1305         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dasa_sim esd
1306
1307 dlvision_config: unconfig
1308         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dlvision gdsys
1309
1310 DP405_config:   unconfig
1311         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dp405 esd
1312
1313 DU405_config:   unconfig
1314         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx du405 esd
1315
1316 DU440_config:   unconfig
1317         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx du440 esd
1318
1319 ebony_config:   unconfig
1320         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ebony amcc
1321
1322 ERIC_config:    unconfig
1323         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx eric
1324
1325 fx12mm_flash_config: unconfig
1326         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1327         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1328         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1329                 > $(obj)board/avnet/fx12mm/config.tmp
1330         @echo "TEXT_BASE := 0xFFCB0000" \
1331                 >> $(obj)board/avnet/fx12mm/config.tmp
1332         @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
1333
1334 fx12mm_config: unconfig
1335         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1336         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1337         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1338                 > $(obj)board/avnet/fx12mm/config.tmp
1339         @echo "TEXT_BASE := 0x03000000" \
1340                 >> $(obj)board/avnet/fx12mm/config.tmp
1341         @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
1342
1343 G2000_config:   unconfig
1344         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx g2000
1345
1346 gdppc440etx_config:     unconfig
1347         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx gdppc440etx gdsys
1348
1349 hcu4_config:    unconfig
1350         @mkdir -p $(obj)board/netstal/common
1351         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hcu4 netstal
1352
1353 hcu5_config:    unconfig
1354         @mkdir -p $(obj)board/netstal/common
1355         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hcu5 netstal
1356
1357 HH405_config:   unconfig
1358         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hh405 esd
1359
1360 HUB405_config:  unconfig
1361         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hub405 esd
1362
1363 icon_config:    unconfig
1364         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx icon mosaixtech
1365
1366 # Compact-Center(codename intip) & DevCon-Center use different U-Boot images
1367 intip_config \
1368 devconcenter_config:    unconfig
1369         @mkdir -p $(obj)include
1370         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1371                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1372         @$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys
1373
1374 JSE_config:     unconfig
1375         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx jse
1376
1377 KAREF_config: unconfig
1378         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx karef sandburst
1379
1380 katmai_config:  unconfig
1381         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx katmai amcc
1382
1383 # Kilauea & Haleakala images are identical (recognized via PVR)
1384 kilauea_config \
1385 haleakala_config: unconfig
1386         @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
1387
1388 kilauea_nand_config \
1389 haleakala_nand_config: unconfig
1390         @mkdir -p $(obj)include $(obj)board/amcc/kilauea
1391         @mkdir -p $(obj)nand_spl/board/amcc/kilauea
1392         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1393         @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
1394         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
1395         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1396
1397 korat_config:   unconfig
1398         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx korat
1399
1400 luan_config:    unconfig
1401         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx luan amcc
1402
1403 lwmon5_config:  unconfig
1404         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx lwmon5
1405
1406 makalu_config:  unconfig
1407         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx makalu amcc
1408
1409 mcu25_config:  unconfig
1410         @mkdir -p $(obj)board/netstal/common
1411         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx mcu25 netstal
1412
1413 METROBOX_config: unconfig
1414         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx metrobox sandburst
1415
1416 MIP405_config:  unconfig
1417         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx mip405 mpl
1418
1419 MIP405T_config: unconfig
1420         @mkdir -p $(obj)include
1421         @echo "#define CONFIG_MIP405T" >$(obj)include/config.h
1422         @$(XECHO) "Enable subset config for MIP405T"
1423         @$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl
1424
1425 ML2_config:     unconfig
1426         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ml2
1427
1428 ml507_flash_config: unconfig
1429         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1430         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1431         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1432                 > $(obj)board/xilinx/ml507/config.tmp
1433         @echo "TEXT_BASE := 0xFE360000" \
1434                 >> $(obj)board/xilinx/ml507/config.tmp
1435         @$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx
1436
1437 ml507_config: unconfig
1438         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1439         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1440         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1441                 > $(obj)board/xilinx/ml507/config.tmp
1442         @echo "TEXT_BASE := 0x04000000"  \
1443                 >> $(obj)board/xilinx/ml507/config.tmp
1444         @$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx
1445
1446 neo_config:     unconfig
1447         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx neo gdsys
1448
1449 ocotea_config:  unconfig
1450         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocotea amcc
1451
1452 OCRTC_config            \
1453 ORSG_config:    unconfig
1454         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocrtc esd
1455
1456 p3p440_config:  unconfig
1457         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx p3p440 prodrive
1458
1459 PCI405_config:  unconfig
1460         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pci405 esd
1461
1462 pcs440ep_config:        unconfig
1463         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pcs440ep
1464
1465 PIP405_config:  unconfig
1466         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pip405 mpl
1467
1468 PLU405_config:  unconfig
1469         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx plu405 esd
1470
1471 PMC405_config:  unconfig
1472         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc405 esd
1473
1474 PMC405DE_config:        unconfig
1475         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc405de esd
1476
1477 PMC440_config:  unconfig
1478         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc440 esd
1479
1480 PPChameleonEVB_config           \
1481 PPChameleonEVB_BA_25_config     \
1482 PPChameleonEVB_ME_25_config     \
1483 PPChameleonEVB_HI_25_config     \
1484 PPChameleonEVB_BA_33_config     \
1485 PPChameleonEVB_ME_33_config     \
1486 PPChameleonEVB_HI_33_config:    unconfig
1487         @mkdir -p $(obj)include
1488         @[ -z "$(findstring EVB_BA,$@)" ] || \
1489                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
1490                   $(XECHO) "... BASIC model" ; \
1491                 }
1492         @[ -z "$(findstring EVB_ME,$@)" ] || \
1493                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
1494                   $(XECHO) "... MEDIUM model" ; \
1495                 }
1496         @[ -z "$(findstring EVB_HI,$@)" ] || \
1497                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
1498                   $(XECHO) "... HIGH-END model" ; \
1499                 }
1500         @[ -z "$(findstring _25,$@)" ] || \
1501                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
1502                   $(XECHO) "SysClk = 25MHz" ; \
1503                 }
1504         @[ -z "$(findstring _33,$@)" ] || \
1505                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
1506                   $(XECHO) "SysClk = 33MHz" ; \
1507                 }
1508         @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave
1509
1510 quad100hd_config:       unconfig
1511         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx quad100hd
1512
1513 redwood_config: unconfig
1514         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx redwood amcc
1515
1516 Sam460ex_config:        unconfig
1517         @mkdir -p $(obj)include
1518         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1519                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1520         @$(MKCONFIG) -n $@ -a Sam460ex powerpc ppc4xx Sam460ex ACube
1521
1522 sbc405_config:  unconfig
1523         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx sbc405
1524
1525 sc3_config:unconfig
1526         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx sc3
1527
1528 sequoia_config \
1529 rainier_config: unconfig
1530         @mkdir -p $(obj)include
1531         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1532                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1533         @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
1534
1535 sequoia_nand_config \
1536 rainier_nand_config: unconfig
1537         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1538         @mkdir -p $(obj)nand_spl/board/amcc/sequoia
1539         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1540         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1541                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1542         @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
1543         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1544         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1545
1546 sequoia_ramboot_config \
1547 rainier_ramboot_config: unconfig
1548         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1549         @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
1550         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1551                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1552         @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
1553         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1554         @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
1555                 $(obj)board/amcc/sequoia/config.tmp
1556
1557 taihu_config:   unconfig
1558         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taihu amcc
1559
1560 taishan_config: unconfig
1561         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taishan amcc
1562
1563 v5fx30teval_config: unconfig
1564         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1565         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1566         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1567                 > $(obj)board/avnet/v5fx30teval/config.tmp
1568         @echo "TEXT_BASE := 0x03000000" \
1569                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1570         @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet
1571
1572 v5fx30teval_flash_config: unconfig
1573         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1574         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1575         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1576                 > $(obj)board/avnet/v5fx30teval/config.tmp
1577         @echo "TEXT_BASE := 0xFF1C0000" \
1578                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1579         @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet
1580
1581 VOH405_config:  unconfig
1582         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx voh405 esd
1583
1584 VOM405_config:  unconfig
1585         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx vom405 esd
1586
1587 W7OLMC_config   \
1588 W7OLMG_config: unconfig
1589         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx w7o
1590
1591 # Walnut & Sycamore images are identical (recognized via PVR)
1592 walnut_config \
1593 sycamore_config: unconfig
1594         @$(MKCONFIG) -n $@ -a walnut powerpc ppc4xx walnut amcc
1595
1596 WUH405_config:  unconfig
1597         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx wuh405 esd
1598
1599 xilinx-ppc405-generic_flash_config: unconfig
1600         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1601         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1602                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1603         @echo "TEXT_BASE := 0xFE360000" \
1604                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1605         @$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
1606
1607 xilinx-ppc405-generic_config: unconfig
1608         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1609         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1610                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1611         @echo "TEXT_BASE := 0x04000000" \
1612                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1613         @$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
1614
1615 xilinx-ppc440-generic_flash_config: unconfig
1616         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1617         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1618                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1619         @echo "TEXT_BASE := 0xFE360000" \
1620                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1621         @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
1622
1623 xilinx-ppc440-generic_config: unconfig
1624         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1625         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1626                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1627         @echo "TEXT_BASE := 0x04000000" \
1628                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1629         @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
1630
1631 XPEDITE1000_config:     unconfig
1632         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx xpedite1000 xes
1633
1634 yosemite_config \
1635 yellowstone_config: unconfig
1636         @mkdir -p $(obj)include
1637         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1638                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1639         @$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc
1640
1641 yucca_config:   unconfig
1642         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx yucca amcc
1643
1644 zeus_config:    unconfig
1645         @$(MKCONFIG) $(@:_config=) powerpc ppc4xx zeus
1646
1647 #########################################################################
1648 ## MPC8220 Systems
1649 #########################################################################
1650
1651 Alaska8220_config       \
1652 Yukon8220_config:       unconfig
1653         @$(MKCONFIG) $(@:_config=) powerpc mpc8220 alaska
1654
1655 sorcery_config:         unconfig
1656         @$(MKCONFIG) $(@:_config=) powerpc mpc8220 sorcery
1657
1658 #########################################################################
1659 ## MPC824x Systems
1660 #########################################################################
1661 xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
1662
1663 A3000_config: unconfig
1664         @$(MKCONFIG) $(@:_config=) powerpc mpc824x a3000
1665
1666 barco_config: unconfig
1667         @$(MKCONFIG) $(@:_config=) powerpc mpc824x barco
1668
1669 BMW_config: unconfig
1670         @$(MKCONFIG) $(@:_config=) powerpc mpc824x bmw
1671
1672 CPC45_config    \
1673 CPC45_ROMBOOT_config:   unconfig
1674         @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc824x cpc45
1675         @cd $(obj)include ;                             \
1676         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1677                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1678                 $(XECHO) "... booting from 8-bit flash" ; \
1679         else \
1680                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1681                 $(XECHO) "... booting from 64-bit flash" ; \
1682         fi; \
1683         echo "export CONFIG_BOOT_ROM" >> config.mk;
1684
1685 CU824_config: unconfig
1686         @$(MKCONFIG) $(@:_config=) powerpc mpc824x cu824
1687
1688 debris_config: unconfig
1689         @$(MKCONFIG) $(@:_config=) powerpc mpc824x debris etin
1690
1691 eXalion_config: unconfig
1692         @$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion
1693
1694 HIDDEN_DRAGON_config: unconfig
1695         @$(MKCONFIG) $(@:_config=) powerpc mpc824x hidden_dragon
1696
1697 kvme080_config: unconfig
1698         @$(MKCONFIG) $(@:_config=) powerpc mpc824x kvme080 etin
1699
1700 # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
1701 # time permits.
1702 #linkstation_HDLAN_config \
1703 # Remove this line when HDLAN is fixed
1704 linkstation_HGLAN_config: unconfig
1705         @mkdir -p $(obj)include
1706         @case $@ in \
1707                 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
1708                 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
1709         esac
1710         @$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation
1711
1712 MOUSSE_config: unconfig
1713         @$(MKCONFIG) $(@:_config=) powerpc mpc824x mousse
1714
1715 MUSENKI_config: unconfig
1716         @$(MKCONFIG) $(@:_config=) powerpc mpc824x musenki
1717
1718 MVBLUE_config:  unconfig
1719         @$(MKCONFIG) $(@:_config=) powerpc mpc824x mvblue
1720
1721 OXC_config: unconfig
1722         @$(MKCONFIG) $(@:_config=) powerpc mpc824x oxc
1723
1724 PN62_config: unconfig
1725         @$(MKCONFIG) $(@:_config=) powerpc mpc824x pn62
1726
1727 Sandpoint8240_config: unconfig
1728         @$(MKCONFIG) $(@:_config=) powerpc mpc824x sandpoint
1729
1730 Sandpoint8245_config: unconfig
1731         @$(MKCONFIG) $(@:_config=) powerpc mpc824x sandpoint
1732
1733 sbc8240_config: unconfig
1734         @$(MKCONFIG) $(@:_config=) powerpc mpc824x sbc8240
1735
1736 utx8245_config: unconfig
1737         @$(MKCONFIG) $(@:_config=) powerpc mpc824x utx8245
1738
1739 #########################################################################
1740 ## MPC8260 Systems
1741 #########################################################################
1742
1743 atc_config:     unconfig
1744         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 atc
1745
1746 cogent_mpc8260_config:  unconfig
1747         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent
1748
1749 CPU86_config    \
1750 CPU86_ROMBOOT_config: unconfig
1751         @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu86
1752         @cd $(obj)include ;                             \
1753         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1754                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1755                 $(XECHO) "... booting from 8-bit flash" ; \
1756         else \
1757                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1758                 $(XECHO) "... booting from 64-bit flash" ; \
1759         fi; \
1760         echo "export CONFIG_BOOT_ROM" >> config.mk;
1761
1762 CPU87_config    \
1763 CPU87_ROMBOOT_config: unconfig
1764         @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu87
1765         @cd $(obj)include ;                             \
1766         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1767                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1768                 $(XECHO) "... booting from 8-bit flash" ; \
1769         else \
1770                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1771                 $(XECHO) "... booting from 64-bit flash" ; \
1772         fi; \
1773         echo "export CONFIG_BOOT_ROM" >> config.mk;
1774
1775 ep8248_config   \
1776 ep8248E_config  :       unconfig
1777         @$(MKCONFIG) ep8248 powerpc mpc8260 ep8248
1778
1779 ep8260_config:  unconfig
1780         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep8260
1781
1782 ep82xxm_config: unconfig
1783         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep82xxm
1784
1785 gw8260_config:  unconfig
1786         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 gw8260
1787
1788 hymod_config:   unconfig
1789         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 hymod
1790
1791 IDS8247_config: unconfig
1792         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ids8247
1793
1794 IPHASE4539_config:      unconfig
1795         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 iphase4539
1796
1797 ISPAN_config            \
1798 ISPAN_REVB_config:      unconfig
1799         @mkdir -p $(obj)include
1800         @if [ "$(findstring _REVB_,$@)" ] ; then \
1801                 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
1802         fi
1803         @$(MKCONFIG) -a ISPAN powerpc mpc8260 ispan
1804
1805 mgcoge_config   :       unconfig
1806         @$(MKCONFIG) mgcoge powerpc mpc8260 mgcoge keymile
1807
1808 MPC8260ADS_config       \
1809 MPC8260ADS_lowboot_config       \
1810 MPC8260ADS_33MHz_config \
1811 MPC8260ADS_33MHz_lowboot_config \
1812 MPC8260ADS_40MHz_config \
1813 MPC8260ADS_40MHz_lowboot_config \
1814 MPC8272ADS_config       \
1815 MPC8272ADS_lowboot_config       \
1816 PQ2FADS_config          \
1817 PQ2FADS_lowboot_config          \
1818 PQ2FADS-VR_config       \
1819 PQ2FADS-VR_lowboot_config       \
1820 PQ2FADS-ZU_config       \
1821 PQ2FADS-ZU_lowboot_config       \
1822 PQ2FADS-ZU_66MHz_config \
1823 PQ2FADS-ZU_66MHz_lowboot_config \
1824         :               unconfig
1825         @mkdir -p $(obj)include
1826         @mkdir -p $(obj)board/freescale/mpc8260ads
1827         $(if $(findstring PQ2FADS,$@), \
1828         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
1829         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
1830         $(if $(findstring MHz,$@), \
1831         @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
1832         $(if $(findstring VR,$@), \
1833         @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
1834         @[ -z "$(findstring lowboot_,$@)" ] || \
1835                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
1836                   $(XECHO) "... with lowboot configuration" ; \
1837                 }
1838         @$(MKCONFIG) -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale
1839
1840 MPC8266ADS_config:      unconfig
1841         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 mpc8266ads freescale
1842
1843 muas3001_dev_config \
1844 muas3001_config :       unconfig
1845         @mkdir -p $(obj)include
1846         @mkdir -p $(obj)board/muas3001
1847         @if [ "$(findstring dev,$@)" ] ; then \
1848                 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
1849         fi
1850         @$(MKCONFIG) -a muas3001 powerpc mpc8260 muas3001
1851
1852 # PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
1853 PM825_config    \
1854 PM825_ROMBOOT_config    \
1855 PM825_BIGFLASH_config   \
1856 PM825_ROMBOOT_BIGFLASH_config   \
1857 PM826_config    \
1858 PM826_ROMBOOT_config    \
1859 PM826_BIGFLASH_config   \
1860 PM826_ROMBOOT_BIGFLASH_config:  unconfig
1861         @mkdir -p $(obj)include
1862         @mkdir -p $(obj)board/pm826
1863         @if [ "$(findstring PM825_,$@)" ] ; then \
1864                 echo "#define CONFIG_PCI"       >$(obj)include/config.h ; \
1865         else \
1866                 >$(obj)include/config.h ; \
1867         fi
1868         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1869                 $(XECHO) "... booting from 8-bit flash" ; \
1870                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1871                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1872                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1873                         $(XECHO) "... with 32 MB Flash" ; \
1874                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1875                 fi; \
1876         else \
1877                 $(XECHO) "... booting from 64-bit flash" ; \
1878                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1879                         $(XECHO) "... with 32 MB Flash" ; \
1880                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1881                         echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
1882                 else \
1883                         echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
1884                 fi; \
1885         fi
1886         @$(MKCONFIG) -a PM826 powerpc mpc8260 pm826
1887
1888 PM828_config    \
1889 PM828_PCI_config        \
1890 PM828_ROMBOOT_config    \
1891 PM828_ROMBOOT_PCI_config:       unconfig
1892         @mkdir -p $(obj)include
1893         @mkdir -p $(obj)board/pm826
1894         @if [ "$(findstring _PCI_,$@)" ] ; then \
1895                 echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
1896                 $(XECHO) "... with PCI enabled" ; \
1897         fi
1898         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1899                 $(XECHO) "... booting from 8-bit flash" ; \
1900                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1901                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1902         fi
1903         @$(MKCONFIG) -a PM828 powerpc mpc8260 pm828
1904
1905 ppmc8260_config:        unconfig
1906         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ppmc8260
1907
1908 Rattler8248_config      \
1909 Rattler_config:         unconfig
1910         @mkdir -p $(obj)include
1911         $(if $(findstring 8248,$@), \
1912         @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
1913         @$(MKCONFIG) -a Rattler powerpc mpc8260 rattler
1914
1915 RPXsuper_config:        unconfig
1916         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rpxsuper
1917
1918 rsdproto_config:        unconfig
1919         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rsdproto
1920
1921 sacsng_config:  unconfig
1922         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 sacsng
1923
1924 sbc8260_config: unconfig
1925         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 sbc8260
1926
1927 SCM_config:             unconfig
1928         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 SCM siemens
1929
1930 TQM8255_AA_config \
1931 TQM8260_AA_config \
1932 TQM8260_AB_config \
1933 TQM8260_AC_config \
1934 TQM8260_AD_config \
1935 TQM8260_AE_config \
1936 TQM8260_AF_config \
1937 TQM8260_AG_config \
1938 TQM8260_AH_config \
1939 TQM8260_AI_config \
1940 TQM8265_AA_config:  unconfig
1941         @mkdir -p $(obj)include
1942         @case "$@" in \
1943         TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;  BMODE=8260;;  \
1944         TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;  BMODE=8260;; \
1945         TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1946         TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1947         TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1948         TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;  BMODE=8260;; \
1949         TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1950         TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=8260;; \
1951         TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;;  \
1952         TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1953         TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1954         esac; \
1955         if [ "$${CTYPE}" != "MPC8260" ] ; then \
1956                 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
1957         fi; \
1958         echo "#define CONFIG_$${CFREQ}MHz"      >>$(obj)include/config.h ; \
1959         echo "... with $${CFREQ}MHz system clock" ; \
1960         if [ "$${CACHE}" = "yes" ] ; then \
1961                 echo "#define CONFIG_L2_CACHE"  >>$(obj)include/config.h ; \
1962                 $(XECHO) "... with L2 Cache support" ; \
1963         else \
1964                 echo "#undef CONFIG_L2_CACHE"   >>$(obj)include/config.h ; \
1965                 $(XECHO) "... without L2 Cache support" ; \
1966         fi; \
1967         if [ "$${BMODE}" = "60x" ] ; then \
1968                 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
1969                 $(XECHO) "... with 60x Bus Mode" ; \
1970         else \
1971                 echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
1972                 $(XECHO) "... without 60x Bus Mode" ; \
1973         fi
1974         @$(MKCONFIG) -a TQM8260 powerpc mpc8260 tqm8260 tqc
1975
1976 TQM8272_config: unconfig
1977         @$(MKCONFIG) TQM8272 powerpc mpc8260 tqm8272 tqc
1978
1979 VoVPN-GW_66MHz_config   \
1980 VoVPN-GW_100MHz_config:         unconfig
1981         @mkdir -p $(obj)include
1982         @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
1983         @$(MKCONFIG) -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk
1984
1985 ZPC1900_config: unconfig
1986         @$(MKCONFIG) $(@:_config=) powerpc mpc8260 zpc1900
1987
1988 #########################################################################
1989 ## Coldfire
1990 #########################################################################
1991
1992 astro_mcf5373l_config \
1993 astro_mcf5373l_RAM_config :     unconfig
1994         @$(MKCONFIG) -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro
1995
1996 M5208EVBE_config :              unconfig
1997         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
1998
1999 M52277EVB_config \
2000 M52277EVB_spansion_config \
2001 M52277EVB_stmicro_config :      unconfig
2002         @case "$@" in \
2003         M52277EVB_config)               FLASH=SPANSION;; \
2004         M52277EVB_spansion_config)      FLASH=SPANSION;; \
2005         M52277EVB_stmicro_config)       FLASH=STMICRO;; \
2006         esac; \
2007         if [ "$${FLASH}" = "SPANSION" ] ; then \
2008                 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
2009                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2010                 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
2011                 $(XECHO) "... with SPANSION boot..." ; \
2012         fi; \
2013         if [ "$${FLASH}" = "STMICRO" ] ; then \
2014                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2015                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2016                 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2017                 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
2018                 $(XECHO) "... with ST Micro boot..." ; \
2019         fi
2020         @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
2021
2022 M5235EVB_config \
2023 M5235EVB_Flash16_config \
2024 M5235EVB_Flash32_config:        unconfig
2025         @case "$@" in \
2026         M5235EVB_config)                FLASH=16;; \
2027         M5235EVB_Flash16_config)        FLASH=16;; \
2028         M5235EVB_Flash32_config)        FLASH=32;; \
2029         esac; \
2030         if [ "$${FLASH}" != "16" ] ; then \
2031                 echo "#define NORFLASH_PS32BIT  1" >> $(obj)include/config.h ; \
2032                 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2033                 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2034         else \
2035                 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2036                 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2037         fi
2038         @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
2039
2040 M5249EVB_config :               unconfig
2041         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
2042
2043 M5253DEMO_config :              unconfig
2044         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale
2045
2046 M5253EVBE_config :              unconfig
2047         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
2048
2049 cobra5272_config :              unconfig
2050         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
2051
2052 EB+MCF-EV123_config :           unconfig
2053         @mkdir -p $(obj)include
2054         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2055         @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2056         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2057
2058 EB+MCF-EV123_internal_config :  unconfig
2059         @mkdir -p $(obj)include
2060         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2061         @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2062         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2063
2064 EP2500_config:                  unconfig
2065         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 ep2500 Mercury
2066
2067 idmr_config :                   unconfig
2068         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
2069
2070 M5271EVB_config :               unconfig
2071         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale
2072
2073 M5272C3_config :                unconfig
2074         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale
2075
2076 M5275EVB_config :               unconfig
2077         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale
2078
2079 M5282EVB_config :               unconfig
2080         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
2081
2082 M53017EVB_config :              unconfig
2083         @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
2084
2085 M5329AFEE_config \
2086 M5329BFEE_config :      unconfig
2087         @case "$@" in \
2088         M5329AFEE_config)       NAND=0;; \
2089         M5329BFEE_config)       NAND=16;; \
2090         esac; \
2091         if [ "$${NAND}" != "0" ] ; then \
2092                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2093         fi
2094         @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
2095
2096 M5373EVB_config :       unconfig
2097         @case "$@" in \
2098         M5373EVB_config)        NAND=16;; \
2099         esac; \
2100         if [ "$${NAND}" != "0" ] ; then \
2101                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2102         fi
2103         @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
2104
2105 M54451EVB_config \
2106 M54451EVB_stmicro_config :      unconfig
2107         @case "$@" in \
2108         M54451EVB_config)               FLASH=NOR;; \
2109         M54451EVB_stmicro_config)       FLASH=STMICRO;; \
2110         esac; \
2111         if [ "$${FLASH}" = "NOR" ] ; then \
2112                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2113                 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
2114                 $(XECHO) "... with NOR boot..." ; \
2115         fi; \
2116         if [ "$${FLASH}" = "STMICRO" ] ; then \
2117                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2118                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2119                 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2120                 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
2121                 $(XECHO) "... with ST Micro boot..." ; \
2122         fi; \
2123         echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
2124         @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
2125
2126 M54455EVB_config \
2127 M54455EVB_atmel_config \
2128 M54455EVB_intel_config \
2129 M54455EVB_a33_config \
2130 M54455EVB_a66_config \
2131 M54455EVB_i33_config \
2132 M54455EVB_i66_config \
2133 M54455EVB_stm33_config :        unconfig
2134         @case "$@" in \
2135         M54455EVB_config)               FLASH=ATMEL; FREQ=33333333;; \
2136         M54455EVB_atmel_config)         FLASH=ATMEL; FREQ=33333333;; \
2137         M54455EVB_intel_config)         FLASH=INTEL; FREQ=33333333;; \
2138         M54455EVB_a33_config)           FLASH=ATMEL; FREQ=33333333;; \
2139         M54455EVB_a66_config)           FLASH=ATMEL; FREQ=66666666;; \
2140         M54455EVB_i33_config)           FLASH=INTEL; FREQ=33333333;; \
2141         M54455EVB_i66_config)           FLASH=INTEL; FREQ=66666666;; \
2142         M54455EVB_stm33_config)         FLASH=STMICRO; FREQ=33333333;; \
2143         esac; \
2144         if [ "$${FLASH}" = "INTEL" ] ; then \
2145                 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
2146                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2147                 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
2148                 $(XECHO) "... with INTEL boot..." ; \
2149         fi; \
2150         if [ "$${FLASH}" = "ATMEL" ] ; then \
2151                 echo "#define CONFIG_SYS_ATMEL_BOOT"    >> $(obj)include/config.h ; \
2152                 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2153                 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2154                 $(XECHO) "... with ATMEL boot..." ; \
2155         fi; \
2156         if [ "$${FLASH}" = "STMICRO" ] ; then \
2157                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2158                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2159                 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2160                 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2161                 $(XECHO) "... with ST Micro boot..." ; \
2162         fi; \
2163         echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
2164         $(XECHO) "... with $${FREQ}Hz input clock"
2165         @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
2166
2167 M5475AFE_config \
2168 M5475BFE_config \
2169 M5475CFE_config \
2170 M5475DFE_config \
2171 M5475EFE_config \
2172 M5475FFE_config \
2173 M5475GFE_config :       unconfig
2174         @case "$@" in \
2175         M5475AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2176         M5475BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2177         M5475CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2178         M5475DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2179         M5475EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2180         M5475FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2181         M5475GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2182         esac; \
2183         echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
2184         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2185         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2186         if [ "$${RAM1}" != "0" ] ; then \
2187                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2188         fi; \
2189         if [ "$${CODE}" != "0" ] ; then \
2190                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2191         fi; \
2192         if [ "$${VID}" == "1" ] ; then \
2193                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2194         fi; \
2195         if [ "$${USB}" == "1" ] ; then \
2196                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2197         fi
2198         @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
2199
2200 M5485AFE_config \
2201 M5485BFE_config \
2202 M5485CFE_config \
2203 M5485DFE_config \
2204 M5485EFE_config \
2205 M5485FFE_config \
2206 M5485GFE_config \
2207 M5485HFE_config :       unconfig
2208         @case "$@" in \
2209         M5485AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2210         M5485BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2211         M5485CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2212         M5485DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2213         M5485EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2214         M5485FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2215         M5485GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2216         M5485HFE_config)        BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
2217         esac; \
2218         echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
2219         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2220         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2221         if [ "$${RAM1}" != "0" ] ; then \
2222                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2223         fi; \
2224         if [ "$${CODE}" != "0" ] ; then \
2225                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2226         fi; \
2227         if [ "$${VID}" == "1" ] ; then \
2228                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2229         fi; \
2230         if [ "$${USB}" == "1" ] ; then \
2231                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2232         fi
2233         @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
2234
2235 TASREG_config :         unconfig
2236         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
2237
2238 #########################################################################
2239 ## MPC83xx Systems
2240 #########################################################################
2241
2242 kmeter1_config: unconfig
2243         @$(MKCONFIG) kmeter1 powerpc mpc83xx kmeter1 keymile
2244
2245 MPC8313ERDB_33_config \
2246 MPC8313ERDB_66_config \
2247 MPC8313ERDB_NAND_33_config \
2248 MPC8313ERDB_NAND_66_config: unconfig
2249         @mkdir -p $(obj)include
2250         @mkdir -p $(obj)board/freescale/mpc8313erdb
2251         @if [ "$(findstring _33_,$@)" ] ; then \
2252                 $(XECHO) -n "...33M ..." ; \
2253                 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
2254         fi ; \
2255         if [ "$(findstring _66_,$@)" ] ; then \
2256                 $(XECHO) -n "...66M..." ; \
2257                 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
2258         fi ; \
2259         if [ "$(findstring _NAND_,$@)" ] ; then \
2260                 $(XECHO) -n "...NAND..." ; \
2261                 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
2262                 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
2263         fi ;
2264         @$(MKCONFIG) -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale
2265         @if [ "$(findstring _NAND_,$@)" ] ; then \
2266                 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
2267         fi ;
2268
2269 MPC8315ERDB_NAND_config \
2270 MPC8315ERDB_config: unconfig
2271         @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale
2272
2273 MPC8323ERDB_config:     unconfig
2274         @$(MKCONFIG) -a MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
2275
2276 MPC832XEMDS_config \
2277 MPC832XEMDS_HOST_33_config \
2278 MPC832XEMDS_HOST_66_config \
2279 MPC832XEMDS_SLAVE_config \
2280 MPC832XEMDS_ATM_config: unconfig
2281         @mkdir -p $(obj)include
2282         @if [ "$(findstring _HOST_,$@)" ] ; then \
2283                 $(XECHO) -n "... PCI HOST " ; \
2284                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2285         fi ; \
2286         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2287                 $(XECHO) "...PCI SLAVE 66M"  ; \
2288                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2289                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2290         fi ; \
2291         if [ "$(findstring _33_,$@)" ] ; then \
2292                 $(XECHO) -n "...33M ..." ; \
2293                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2294                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2295         fi ; \
2296         if [ "$(findstring _66_,$@)" ] ; then \
2297                 $(XECHO) -n "...66M..." ; \
2298                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2299                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2300         fi ; \
2301         if [ "$(findstring _ATM_,$@)" ] ; then \
2302                 $(XECHO) -n "...ATM..." ; \
2303                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2304                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2305         fi ;
2306         @$(MKCONFIG) -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale
2307
2308 MPC8349EMDS_config:     unconfig
2309         @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mpc8349emds freescale
2310
2311 MPC8349ITX_config \
2312 MPC8349ITX_LOWBOOT_config \
2313 MPC8349ITXGP_config:    unconfig
2314         @mkdir -p $(obj)include
2315         @mkdir -p $(obj)board/freescale/mpc8349itx
2316         @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
2317         @if [ "$(findstring GP,$@)" ] ; then \
2318                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2319         fi
2320         @if [ "$(findstring LOWBOOT,$@)" ] ; then \
2321                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2322         fi
2323         @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX powerpc mpc83xx mpc8349itx freescale
2324
2325 MPC8360EMDS_config \
2326 MPC8360EMDS_HOST_33_config \
2327 MPC8360EMDS_HOST_66_config \
2328 MPC8360EMDS_SLAVE_config \
2329 MPC8360EMDS_ATM_config: unconfig
2330         @mkdir -p $(obj)include
2331         @if [ "$(findstring _HOST_,$@)" ] ; then \
2332                 $(XECHO) -n "... PCI HOST " ; \
2333                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2334         fi ; \
2335         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2336                 $(XECHO) "...PCI SLAVE 66M"  ; \
2337                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2338                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2339         fi ; \
2340         if [ "$(findstring _33_,$@)" ] ; then \
2341                 $(XECHO) -n "...33M ..." ; \
2342                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2343                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2344         fi ; \
2345         if [ "$(findstring _66_,$@)" ] ; then \
2346                 $(XECHO) -n "...66M..." ; \
2347                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2348                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2349         fi ; \
2350         if [ "$(findstring _ATM_,$@)" ] ; then \
2351                 $(XECHO) -n "...ATM..." ; \
2352                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2353                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2354         fi ;
2355         @$(MKCONFIG) -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale
2356
2357 MPC8360ERDK_33_config \
2358 MPC8360ERDK_66_config \
2359 MPC8360ERDK_config:     unconfig
2360         @mkdir -p $(obj)include
2361         @if [ "$(findstring _33_,$@)" ] ; then \
2362                 $(XECHO) -n "... CLKIN 33MHz " ; \
2363                 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
2364         fi ;
2365         @$(MKCONFIG) -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale
2366
2367 MPC837XEMDS_config \
2368 MPC837XEMDS_HOST_config:        unconfig
2369         @mkdir -p $(obj)include
2370         @if [ "$(findstring _HOST_,$@)" ] ; then \
2371                 $(XECHO) -n "... PCI HOST " ; \
2372                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2373         fi ;
2374         @$(MKCONFIG) -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale
2375
2376 MPC837XERDB_config:     unconfig
2377         @$(MKCONFIG) -a MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
2378
2379 MVBLM7_config: unconfig
2380         @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mvblm7 matrix_vision
2381
2382 sbc8349_config \
2383 sbc8349_PCI_33_config \
2384 sbc8349_PCI_66_config: unconfig
2385         @$(MKCONFIG) -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349
2386
2387 SIMPC8313_LP_config \
2388 SIMPC8313_SP_config: unconfig
2389         @mkdir -p $(obj)include
2390         @mkdir -p $(obj)board/sheldon/simpc8313
2391         @if [ "$(findstring _LP_,$@)" ] ; then \
2392                 $(XECHO) -n "...Large Page NAND..." ; \
2393                 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
2394         fi ; \
2395         if [ "$(findstring _SP_,$@)" ] ; then \
2396                 $(XECHO) -n "...Small Page NAND..." ; \
2397                 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
2398         fi ;
2399         @$(MKCONFIG) -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon
2400         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
2401
2402 TQM834x_config: unconfig
2403         @$(MKCONFIG) $(@:_config=) powerpc mpc83xx tqm834x tqc
2404
2405 caddy2_config \
2406 vme8349_config:         unconfig
2407         @$(MKCONFIG) -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd
2408
2409 edb9301_config \
2410 edb9302_config \
2411 edb9302a_config \
2412 edb9307_config \
2413 edb9307a_config \
2414 edb9312_config \
2415 edb9315_config \
2416 edb9315a_config: unconfig
2417         @$(MKCONFIG) -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx
2418
2419 #########################################################################
2420 ## MPC85xx Systems
2421 #########################################################################
2422
2423 ATUM8548_config:        unconfig
2424         @$(MKCONFIG) $(@:_config=) powerpc mpc85xx atum8548
2425
2426 MPC8536DS_NAND_config \
2427 MPC8536DS_SDCARD_config \
2428 MPC8536DS_SPIFLASH_config \
2429 MPC8536DS_36BIT_config \
2430 MPC8536DS_config:       unconfig
2431         @$(MKCONFIG) -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale
2432
2433 MPC8540ADS_config:      unconfig
2434         @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8540ads freescale
2435
2436 MPC8540EVAL_config \
2437 MPC8540EVAL_33_config \
2438 MPC8540EVAL_66_config \
2439 MPC8540EVAL_33_slave_config \
2440 MPC8540EVAL_66_slave_config:      unconfig
2441         @mkdir -p $(obj)include
2442         @if [ "$(findstring _33_,$@)" ] ; then \
2443                 $(XECHO) "... 33 MHz PCI" ; \
2444         else \
2445                 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
2446                 $(XECHO) "... 66 MHz PCI" ; \
2447         fi ; \
2448         if [ "$(findstring _slave_,$@)" ] ; then \
2449                 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
2450                 $(XECHO) " slave" ; \
2451         else \
2452                 $(XECHO) " host" ; \
2453         fi
2454         @$(MKCONFIG) -a MPC8540EVAL powerpc mpc85xx mpc8540eval
2455
2456 MPC8560ADS_config:      unconfig
2457         @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8560ads freescale
2458
2459 MPC8541CDS_legacy_config \
2460 MPC8541CDS_config:      unconfig
2461         @mkdir -p $(obj)include
2462         @if [ "$(findstring _legacy_,$@)" ] ; then \
2463                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2464                 $(XECHO) "... legacy" ; \
2465         fi
2466         @$(MKCONFIG) -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale
2467
2468 MPC8544DS_config:       unconfig
2469         @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8544ds freescale
2470
2471 MPC8548CDS_legacy_config \
2472 MPC8548CDS_config:      unconfig
2473         @mkdir -p $(obj)include
2474         @if [ "$(findstring _legacy_,$@)" ] ; then \
2475                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2476                 $(XECHO) "... legacy" ; \
2477         fi
2478         @$(MKCONFIG) -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale
2479
2480 MPC8555CDS_legacy_config \
2481 MPC8555CDS_config:      unconfig
2482         @mkdir -p $(obj)include
2483         @if [ "$(findstring _legacy_,$@)" ] ; then \
2484                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2485                 $(XECHO) "... legacy" ; \
2486         fi
2487         @$(MKCONFIG) -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale
2488
2489 MPC8568MDS_config:      unconfig
2490         @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8568mds freescale
2491
2492 MPC8569MDS_ATM_config \
2493 MPC8569MDS_NAND_config \
2494 MPC8569MDS_config:      unconfig
2495         @$(MKCONFIG) -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale
2496
2497 MPC8572DS_36BIT_config \
2498 MPC8572DS_config:       unconfig
2499         @$(MKCONFIG) -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale
2500
2501 P2020DS_36BIT_config \
2502 P2020DS_config:         unconfig
2503         @$(MKCONFIG) -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale
2504
2505 P1011RDB_config \
2506 P1011RDB_NAND_config \
2507 P1011RDB_SDCARD_config \
2508 P1011RDB_SPIFLASH_config \
2509 P1020RDB_config \
2510 P1020RDB_NAND_config \
2511 P1020RDB_SDCARD_config \
2512 P1020RDB_SPIFLASH_config \
2513 P2010RDB_config \
2514 P2010RDB_NAND_config \
2515 P2010RDB_SDCARD_config \
2516 P2010RDB_SPIFLASH_config \
2517 P2020RDB_config \
2518 P2020RDB_NAND_config \
2519 P2020RDB_SDCARD_config \
2520 P2020RDB_SPIFLASH_config:       unconfig
2521         @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale
2522
2523 PM854_config:   unconfig
2524         @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm854
2525
2526 PM856_config:   unconfig
2527         @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm856
2528
2529 sbc8540_config \
2530 sbc8540_33_config \
2531 sbc8540_66_config:      unconfig
2532         @$(MKCONFIG) -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560
2533
2534 sbc8548_config \
2535 sbc8548_PCI_33_config \
2536 sbc8548_PCI_66_config \
2537 sbc8548_PCI_33_PCIE_config \
2538 sbc8548_PCI_66_PCIE_config: unconfig
2539         @$(MKCONFIG) -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548
2540
2541 sbc8560_config \
2542 sbc8560_33_config \
2543 sbc8560_66_config:      unconfig
2544         @$(MKCONFIG) -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560
2545
2546 socrates_config:        unconfig
2547         @$(MKCONFIG) $(@:_config=) powerpc mpc85xx socrates
2548
2549 stxgp3_config:          unconfig
2550         @$(MKCONFIG) $(@:_config=) powerpc mpc85xx stxgp3 stx
2551
2552 stxssa_config           \
2553 stxssa_4M_config:       unconfig
2554         @mkdir -p $(obj)include
2555         @if [ "$(findstring _4M_,$@)" ] ; then \
2556                 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
2557                 $(XECHO) "... with 4 MiB flash memory" ; \
2558         fi
2559         @$(MKCONFIG) -a stxssa powerpc mpc85xx stxssa stx
2560
2561 TQM8540_config          \
2562 TQM8541_config          \
2563 TQM8548_config          \
2564 TQM8548_AG_config       \
2565 TQM8548_BE_config       \
2566 TQM8555_config          \
2567 TQM8560_config:         unconfig
2568         @mkdir -p $(obj)include
2569         @BTYPE=$(@:_config=); \
2570         CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
2571         $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
2572         echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
2573         echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
2574         echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
2575         echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
2576         @$(MKCONFIG) -a TQM85xx powerpc mpc85xx tqm85xx tqc
2577         @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
2578
2579 XPEDITE5200_config:     unconfig
2580         @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5200 xes
2581
2582 XPEDITE5370_config:     unconfig
2583         @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5370 xes
2584
2585 #########################################################################
2586 ## MPC86xx Systems
2587 #########################################################################
2588
2589 MPC8610HPCD_config:     unconfig
2590         @$(MKCONFIG) $(@:_config=) powerpc mpc86xx mpc8610hpcd freescale
2591
2592 MPC8641HPCN_36BIT_config \
2593 MPC8641HPCN_config:    unconfig
2594         @mkdir -p $(obj)include
2595         @if [ "$(findstring _36BIT_,$@)" ] ; then \
2596                 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
2597                 $(XECHO) "... enabling 36-bit physical addressing." ; \
2598         fi
2599         @$(MKCONFIG) -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale
2600
2601 sbc8641d_config:        unconfig
2602         @$(MKCONFIG) $(@:_config=) powerpc mpc86xx sbc8641d
2603
2604 XPEDITE5170_config:     unconfig
2605         @$(MKCONFIG) $(@:_config=) powerpc mpc86xx xpedite5170 xes
2606
2607 #########################################################################
2608 ## 74xx/7xx Systems
2609 #########################################################################
2610
2611 AmigaOneG3SE_config:    unconfig
2612         @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx AmigaOneG3SE MAI
2613
2614 BAB7xx_config: unconfig
2615         @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx bab7xx eltec
2616
2617 CPCI750_config: unconfig
2618         @$(MKCONFIG) CPCI750 powerpc 74xx_7xx cpci750 esd
2619
2620 DB64360_config: unconfig
2621         @$(MKCONFIG) DB64360 powerpc 74xx_7xx db64360 Marvell
2622
2623 DB64460_config: unconfig
2624         @$(MKCONFIG) DB64460 powerpc 74xx_7xx db64460 Marvell
2625
2626 ELPPC_config: unconfig
2627         @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx elppc eltec
2628
2629 EVB64260_config \
2630 EVB64260_750CX_config:  unconfig
2631         @$(MKCONFIG) EVB64260 powerpc 74xx_7xx evb64260
2632
2633 mpc7448hpc2_config:  unconfig
2634         @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx mpc7448hpc2 freescale
2635
2636 P3G4_config: unconfig
2637         @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx evb64260
2638
2639 p3m750_config   \
2640 p3m7448_config:         unconfig
2641         @mkdir -p $(obj)include
2642         @if [ "$(findstring 750_,$@)" ] ; then \
2643                 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
2644         else \
2645                 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
2646         fi
2647         @$(MKCONFIG) -a p3mx powerpc 74xx_7xx p3mx prodrive
2648
2649 PCIPPC2_config \
2650 PCIPPC6_config: unconfig
2651         @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx pcippc2
2652
2653 ppmc7xx_config: unconfig
2654         @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx ppmc7xx
2655
2656 ZUMA_config:    unconfig
2657         @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx evb64260
2658
2659 #========================================================================
2660 # ARM
2661 #========================================================================
2662 #########################################################################
2663 ## StrongARM Systems
2664 #########################################################################
2665
2666 assabet_config  :       unconfig
2667         @$(MKCONFIG) $(@:_config=) arm sa1100 assabet
2668
2669 dnp1110_config  :       unconfig
2670         @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
2671
2672 gcplus_config   :       unconfig
2673         @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
2674
2675 lart_config     :       unconfig
2676         @$(MKCONFIG) $(@:_config=) arm sa1100 lart
2677
2678 shannon_config  :       unconfig
2679         @$(MKCONFIG) $(@:_config=) arm sa1100 shannon
2680
2681 #########################################################################
2682 ## ARM92xT Systems
2683 #########################################################################
2684
2685 a320evb_config  :       unconfig
2686         @$(MKCONFIG) $(@:_config=) arm arm920t a320evb faraday a320
2687
2688 #########################################################################
2689 ## Atmel AT91RM9200 Systems
2690 #########################################################################
2691
2692 at91rm9200dk_config     :       unconfig
2693         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
2694
2695 at91rm9200ek_config     :       unconfig
2696         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
2697
2698 cmc_pu2_config  :       unconfig
2699         @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
2700
2701 CPUAT91_RAM_config \
2702 CPUAT91_config  :       unconfig
2703         @mkdir -p $(obj)include
2704         @echo "#define CONFIG_$(@:_config=) 1"  >$(obj)include/config.h
2705         @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
2706
2707 csb637_config   :       unconfig
2708         @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
2709
2710 eb_cpux9k2_config       :       unconfig
2711         @$(MKCONFIG) $(@:_config=) arm arm920t eb_cpux9k2 BuS at91
2712
2713 kb9202_config   :       unconfig
2714         @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
2715
2716 m501sk_config   :       unconfig
2717         @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
2718
2719 mp2usb_config   :       unconfig
2720         @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
2721
2722 #########################################################################
2723 ## ARM926EJ-S Systems
2724 #########################################################################
2725
2726 afeb9260_config:        unconfig
2727         @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
2728
2729 at91cap9adk_config      :       unconfig
2730         @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
2731
2732 at91sam9260ek_nandflash_config \
2733 at91sam9260ek_dataflash_cs0_config \
2734 at91sam9260ek_dataflash_cs1_config \
2735 at91sam9260ek_config \
2736 at91sam9g20ek_nandflash_config \
2737 at91sam9g20ek_dataflash_cs0_config \
2738 at91sam9g20ek_dataflash_cs1_config \
2739 at91sam9g20ek_config    :       unconfig
2740         @mkdir -p $(obj)include
2741         @if [ "$(findstring 9g20,$@)" ] ; then \
2742                 echo "#define CONFIG_AT91SAM9G20EK 1"   >>$(obj)include/config.h ; \
2743                 $(XECHO) "... 9G20 Variant" ; \
2744         else \
2745                 echo "#define CONFIG_AT91SAM9260EK 1"   >>$(obj)include/config.h ; \
2746         fi;
2747         @if [ "$(findstring _nandflash,$@)" ] ; then \
2748                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2749                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2750         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2751                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2752                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2753         else \
2754                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2755                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2756         fi;
2757         @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2758
2759 at91sam9xeek_nandflash_config \
2760 at91sam9xeek_dataflash_cs0_config \
2761 at91sam9xeek_dataflash_cs1_config \
2762 at91sam9xeek_config     :       unconfig
2763         @mkdir -p $(obj)include
2764         @if [ "$(findstring _nandflash,$@)" ] ; then \
2765                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2766                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2767         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2768                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2769                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2770         else \
2771                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2772                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2773         fi;
2774         @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2775
2776 at91sam9261ek_nandflash_config \
2777 at91sam9261ek_dataflash_cs0_config \
2778 at91sam9261ek_dataflash_cs3_config \
2779 at91sam9261ek_config \
2780 at91sam9g10ek_nandflash_config \
2781 at91sam9g10ek_dataflash_cs0_config \
2782 at91sam9g10ek_dataflash_cs3_config \
2783 at91sam9g10ek_config    :       unconfig
2784         @mkdir -p $(obj)include
2785         @if [ "$(findstring 9g10,$@)" ] ; then \
2786                 echo "#define CONFIG_AT91SAM9G10EK 1"   >>$(obj)include/config.h ; \
2787                 $(XECHO) "... 9G10 Variant" ; \
2788         else \
2789                 echo "#define CONFIG_AT91SAM9261EK 1"   >>$(obj)include/config.h ; \
2790         fi;
2791         @if [ "$(findstring _nandflash,$@)" ] ; then \
2792                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2793                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2794         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2795                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"   >>$(obj)include/config.h ; \
2796                 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
2797         else \
2798                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2799                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2800         fi;
2801         @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
2802
2803 at91sam9263ek_norflash_config \
2804 at91sam9263ek_norflash_boot_config \
2805 at91sam9263ek_nandflash_config \
2806 at91sam9263ek_dataflash_config \
2807 at91sam9263ek_dataflash_cs0_config \
2808 at91sam9263ek_config    :       unconfig
2809         @mkdir -p $(obj)include
2810         @if [ "$(findstring _nandflash,$@)" ] ; then \
2811                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2812                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2813         elif [ "$(findstring norflash,$@)" ] ; then \
2814                 echo "#define CONFIG_SYS_USE_NORFLASH 1"        >>$(obj)include/config.h ; \
2815                 $(XECHO) "... with environment variable in NOR FLASH" ; \
2816         else \
2817                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2818                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2819         fi;
2820         @if [ "$(findstring norflash_boot,$@)" ] ; then \
2821                 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1"   >>$(obj)include/config.h ; \
2822                 $(XECHO) "... and boot from NOR FLASH" ; \
2823         fi;
2824         @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
2825
2826 at91sam9rlek_nandflash_config \
2827 at91sam9rlek_dataflash_config \
2828 at91sam9rlek_dataflash_cs0_config \
2829 at91sam9rlek_config     :       unconfig
2830         @mkdir -p $(obj)include
2831         @if [ "$(findstring _nandflash,$@)" ] ; then \
2832                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2833                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2834         else \
2835                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2836                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2837         fi;
2838         @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
2839
2840 CPU9G20_128M_config \
2841 CPU9G20_config \
2842 CPU9260_128M_config \
2843 CPU9260_config  :       unconfig
2844         @mkdir -p $(obj)include
2845         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2846         @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91
2847
2848 meesc_config    :       unconfig
2849         @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
2850
2851 pm9261_config   :       unconfig
2852         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
2853
2854 at91sam9m10g45ek_nandflash_config \
2855 at91sam9m10g45ek_dataflash_config \
2856 at91sam9m10g45ek_dataflash_cs0_config \
2857 at91sam9m10g45ek_config \
2858 at91sam9g45ekes_nandflash_config \
2859 at91sam9g45ekes_dataflash_config \
2860 at91sam9g45ekes_dataflash_cs0_config \
2861 at91sam9g45ekes_config  :       unconfig
2862         @mkdir -p $(obj)include
2863                 @if [ "$(findstring 9m10,$@)" ] ; then \
2864                 echo "#define CONFIG_AT91SAM9M10G45EK 1"        >>$(obj)include/config.h ; \
2865                 $(XECHO) "... 9M10G45 Variant" ; \
2866         else \
2867                 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
2868         fi;
2869
2870         @if [ "$(findstring _nandflash,$@)" ] ; then \
2871                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2872                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2873         else \
2874                 echo "#define CONFIG_ATMEL_SPI 1"       >>$(obj)include/config.h ; \
2875                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2876         fi;
2877         @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
2878
2879 otc570_config   :       unconfig
2880         @$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91
2881
2882 pm9263_config   :       unconfig
2883         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
2884
2885 pm9g45_config   :       unconfig
2886         @mkdir -p $(obj)include
2887         @$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91
2888
2889 SBC35_A9G20_NANDFLASH_config \
2890 SBC35_A9G20_EEPROM_config \
2891 SBC35_A9G20_config      :       unconfig
2892         @mkdir -p $(obj)include
2893         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2894         @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
2895
2896 TNY_A9G20_NANDFLASH_config \
2897 TNY_A9G20_EEPROM_config \
2898 TNY_A9G20_config \
2899 TNY_A9260_NANDFLASH_config \
2900 TNY_A9260_EEPROM_config \
2901 TNY_A9260_config        :       unconfig
2902         @mkdir -p $(obj)include
2903         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2904         @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
2905
2906 ########################################################################
2907 ## ARM Integrator boards - see doc/README-integrator for more info.
2908 integratorap_config     \
2909 ap_config               \
2910 ap966_config            \
2911 ap922_config            \
2912 ap922_XA10_config       \
2913 ap7_config              \
2914 ap720t_config           \
2915 ap920t_config           \
2916 ap926ejs_config         \
2917 ap946es_config: unconfig
2918         @board/armltd/integrator/split_by_variant.sh ap $@
2919
2920 integratorcp_config     \
2921 cp_config               \
2922 cp920t_config           \
2923 cp926ejs_config         \
2924 cp946es_config          \
2925 cp1136_config           \
2926 cp966_config            \
2927 cp922_config            \
2928 cp922_XA10_config       \
2929 cp1026_config: unconfig
2930         @board/armltd/integrator/split_by_variant.sh cp $@
2931
2932 da830evm_config         \
2933 da850evm_config:        unconfig
2934         @$(MKCONFIG) $(@:_config=) arm arm926ejs da8xxevm davinci davinci
2935
2936 davinci_dvevm_config :  unconfig
2937         @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
2938
2939 davinci_schmoogie_config :      unconfig
2940         @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
2941
2942 davinci_sffsdr_config : unconfig
2943         @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
2944
2945 davinci_sonata_config : unconfig
2946         @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
2947
2948 davinci_dm355evm_config :       unconfig
2949         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
2950
2951 davinci_dm355leopard_config :   unconfig
2952         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci
2953
2954 davinci_dm365evm_config :       unconfig
2955         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
2956
2957 davinci_dm6467evm_config :      unconfig
2958         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
2959
2960 edminiv2_config: unconfig
2961         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) LaCie orion5x
2962
2963 guruplug_config: unconfig
2964         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
2965
2966 magnesium_config        \
2967 imx27lite_config:       unconfig
2968         @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
2969
2970 lpd7a400_config \
2971 lpd7a404_config:        unconfig
2972         @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
2973
2974 mv88f6281gtw_ge_config: unconfig
2975         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
2976
2977 mx1ads_config   :       unconfig
2978         @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
2979
2980 mx1fs2_config   :       unconfig
2981         @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
2982
2983 netstar_config:         unconfig
2984         @$(MKCONFIG) $(@:_config=) arm arm925t netstar
2985
2986 nhk8815_config \
2987 nhk8815_onenand_config: unconfig
2988         @mkdir -p $(obj)include
2989         @ > $(obj)include/config.h
2990         @if [ "$(findstring _onenand, $@)" ] ; then \
2991                 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
2992                 $(XECHO) "... configured to boot from OneNand Flash"; \
2993         else \
2994                 $(XECHO) "... configured to boot from Nand Flash"; \
2995         fi
2996         @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
2997
2998 omap1510inn_config :    unconfig
2999         @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
3000
3001 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
3002
3003 omap1610inn_config \
3004 omap1610inn_cs0boot_config \
3005 omap1610inn_cs3boot_config \
3006 omap1610inn_cs_autoboot_config \
3007 omap1610h2_config \
3008 omap1610h2_cs0boot_config \
3009 omap1610h2_cs3boot_config \
3010 omap1610h2_cs_autoboot_config:  unconfig
3011         @mkdir -p $(obj)include
3012         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
3013                 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
3014                 $(XECHO) "... configured for CS0 boot"; \
3015         elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
3016                 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
3017                 $(XECHO) "... configured for CS_AUTO boot"; \
3018         else \
3019                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3020                 $(XECHO) "... configured for CS3 boot"; \
3021         fi;
3022         @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
3023
3024 omap5912osk_config :    unconfig
3025         @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
3026
3027 openrd_base_config: unconfig
3028         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3029
3030 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
3031
3032 omap730p2_config \
3033 omap730p2_cs0boot_config \
3034 omap730p2_cs3boot_config :      unconfig
3035         @mkdir -p $(obj)include
3036         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
3037                 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
3038                 $(XECHO) "... configured for CS0 boot"; \
3039         else \
3040                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3041                 $(XECHO) "... configured for CS3 boot"; \
3042         fi;
3043         @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
3044
3045 rd6281a_config: unconfig
3046         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3047
3048 sbc2410x_config: unconfig
3049         @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
3050
3051 scb9328_config  :       unconfig
3052         @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
3053
3054 sheevaplug_config: unconfig
3055         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3056
3057 smdk2400_config :       unconfig
3058         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
3059
3060 smdk2410_config :       unconfig
3061         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
3062
3063 spear300_config \
3064 spear310_config \
3065 spear320_config :       unconfig
3066         @$(MKCONFIG) -n $@ -t $(@:_config=) spear3xx arm arm926ejs $(@:_config=) spear spear
3067
3068 spear600_config :       unconfig
3069         @$(MKCONFIG) -n $@ -t $(@:_config=) spear6xx arm arm926ejs $(@:_config=) spear spear
3070
3071 suen3_config:   unconfig
3072         @$(MKCONFIG) $(@:_config=) arm arm926ejs km_arm keymile kirkwood
3073
3074 SX1_stdout_serial_config \
3075 SX1_config:             unconfig
3076         @mkdir -p $(obj)include
3077         @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
3078                 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3079                 $(XECHO) "... configured for stdout serial"; \
3080         else \
3081                 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3082                 $(XECHO) "... configured for stdout usbtty"; \
3083         fi;
3084         @$(MKCONFIG) SX1 arm arm925t sx1
3085
3086 # TRAB default configuration:   8 MB Flash, 32 MB RAM
3087 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
3088
3089 trab_config \
3090 trab_bigram_config \
3091 trab_bigflash_config \
3092 trab_old_config:        unconfig
3093         @mkdir -p $(obj)include
3094         @mkdir -p $(obj)board/trab
3095         @[ -z "$(findstring _bigram,$@)" ] || \
3096                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3097                   echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
3098                   $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
3099                 }
3100         @[ -z "$(findstring _bigflash,$@)" ] || \
3101                 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
3102                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3103                   $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
3104                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3105                 }
3106         @[ -z "$(findstring _old,$@)" ] || \
3107                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3108                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3109                   $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
3110                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3111                 }
3112         @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
3113
3114 tx25_config     : unconfig
3115         @$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25
3116         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
3117
3118 VCMA9_config    :       unconfig
3119         @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
3120
3121 #########################################################################
3122 # ARM supplied Versatile development boards
3123 #########################################################################
3124
3125 cm4008_config   :       unconfig
3126         @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
3127
3128 cm41xx_config   :       unconfig
3129         @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
3130
3131 versatile_config        \
3132 versatileab_config      \
3133 versatilepb_config :    unconfig
3134         @board/armltd/versatile/split_by_variant.sh $@
3135
3136 voiceblue_config:       unconfig
3137         @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
3138
3139 #########################################################################
3140 ## S3C44B0 Systems
3141 #########################################################################
3142
3143 B2_config       :       unconfig
3144         @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
3145
3146 #########################################################################
3147 ## ARM720T Systems
3148 #########################################################################
3149
3150 armadillo_config:       unconfig
3151         @$(MKCONFIG) $(@:_config=) arm arm720t armadillo
3152
3153 ep7312_config   :       unconfig
3154         @$(MKCONFIG) $(@:_config=) arm arm720t ep7312
3155
3156 impa7_config    :       unconfig
3157         @$(MKCONFIG) $(@:_config=) arm arm720t impa7
3158
3159 modnet50_config :       unconfig
3160         @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
3161
3162 evb4510_config :        unconfig
3163         @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
3164
3165 lpc2292sodimm_config:   unconfig
3166         @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
3167
3168 SMN42_config    :       unconfig
3169         @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
3170
3171 #########################################################################
3172 ## ARM CORTEX Systems
3173 #########################################################################
3174
3175 am3517_evm_config :     unconfig
3176         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 am3517evm logicpd omap3
3177
3178 devkit8000_config :     unconfig
3179         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
3180
3181 omap3_beagle_config :   unconfig
3182         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3
3183
3184 omap3_overo_config :    unconfig
3185         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3
3186
3187 omap3_evm_config :      unconfig
3188         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
3189
3190 omap3_pandora_config :  unconfig
3191         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
3192
3193 omap3_sdp3430_config :  unconfig
3194         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3
3195
3196 omap3_zoom1_config :    unconfig
3197         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3
3198
3199 omap3_zoom2_config :    unconfig
3200         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
3201
3202 s5p_goni_config:        unconfig
3203         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 goni samsung s5pc1xx
3204
3205 smdkc100_config:        unconfig
3206         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
3207
3208 #########################################################################
3209 ## XScale Systems
3210 #########################################################################
3211
3212 actux1_config   :       unconfig
3213         @$(MKCONFIG) $(@:_config=) arm ixp actux1
3214
3215 actux2_config   :       unconfig
3216         @$(MKCONFIG) $(@:_config=) arm ixp actux2
3217
3218 actux3_config   :       unconfig
3219         @$(MKCONFIG) $(@:_config=) arm ixp actux3
3220
3221 actux4_config   :       unconfig
3222         @$(MKCONFIG) $(@:_config=) arm ixp actux4
3223
3224 cerf250_config :        unconfig
3225         @$(MKCONFIG) $(@:_config=) arm pxa cerf250
3226
3227 cradle_config   :       unconfig
3228         @$(MKCONFIG) $(@:_config=) arm pxa cradle
3229
3230 csb226_config   :       unconfig
3231         @$(MKCONFIG) $(@:_config=) arm pxa csb226
3232
3233 delta_config :  unconfig
3234         @$(MKCONFIG) $(@:_config=) arm pxa delta
3235
3236 innokom_config  :       unconfig
3237         @$(MKCONFIG) $(@:_config=) arm pxa innokom
3238
3239 ixdp425_config  :       unconfig
3240         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3241
3242 ixdpg425_config :       unconfig
3243         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3244
3245 lubbock_config  :       unconfig
3246         @$(MKCONFIG) $(@:_config=) arm pxa lubbock
3247
3248 pleb2_config    :       unconfig
3249         @$(MKCONFIG) $(@:_config=) arm pxa pleb2
3250
3251 logodl_config   :       unconfig
3252         @$(MKCONFIG) $(@:_config=) arm pxa logodl
3253
3254 pdnb3_config \
3255 scpu_config:    unconfig
3256         @mkdir -p $(obj)include
3257         @if [ "$(findstring scpu_,$@)" ] ; then \
3258                 echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
3259                 $(XECHO) "... on SCPU board variant" ; \
3260         fi
3261         @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
3262
3263 pxa255_idp_config:      unconfig
3264         @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
3265
3266 polaris_config \
3267 trizepsiv_config        :       unconfig
3268         @mkdir -p $(obj)include
3269         @if [ "$(findstring polaris,$@)" ] ; then \
3270                 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
3271         fi;
3272         @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
3273
3274 wepep250_config :       unconfig
3275         @$(MKCONFIG) $(@:_config=) arm pxa wepep250
3276
3277 xaeniax_config  :       unconfig
3278         @$(MKCONFIG) $(@:_config=) arm pxa xaeniax
3279
3280 xm250_config    :       unconfig
3281         @$(MKCONFIG) $(@:_config=) arm pxa xm250
3282
3283 xsengine_config :       unconfig
3284         @$(MKCONFIG) $(@:_config=) arm pxa xsengine
3285
3286 zylonite_config :
3287         @$(MKCONFIG) $(@:_config=) arm pxa zylonite
3288
3289 #########################################################################
3290 ## ARM1136 Systems
3291 #########################################################################
3292
3293 apollon_config          : unconfig
3294         @mkdir -p $(obj)include
3295         @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
3296         @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
3297         @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
3298
3299 imx31_litekit_config    : unconfig
3300         @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
3301
3302 imx31_phycore_eet_config \
3303 imx31_phycore_config    : unconfig
3304         @mkdir -p $(obj)include
3305         @if [ -n "$(findstring _eet_,$@)" ]; then                       \
3306                 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;      \
3307         fi
3308         @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
3309
3310 mx31ads_config          : unconfig
3311         @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
3312
3313 mx31pdk_config \
3314 mx31pdk_nand_config     : unconfig
3315         @mkdir -p $(obj)include
3316         @if [ -n "$(findstring _nand_,$@)" ]; then                                      \
3317                 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;            \
3318         else                                                                            \
3319                 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;     \
3320                 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h;    \
3321         fi
3322         @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
3323
3324 mx51evk_config  : unconfig
3325         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51
3326
3327 omap2420h4_config       : unconfig
3328         @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
3329
3330 qong_config             : unconfig
3331         @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
3332
3333 #########################################################################
3334 ## ARM1176 Systems
3335 #########################################################################
3336 smdk6400_noUSB_config   \
3337 smdk6400_config :       unconfig
3338         @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
3339         @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
3340         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
3341         @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then                       \
3342                 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3343                 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx;         \
3344         else                                                                            \
3345                 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3346                 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx;   \
3347         fi
3348         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
3349
3350 tnetv107x_evm_config: unconfig
3351         @$(MKCONFIG) $(@:_config=) arm arm1176 tnetv107xevm ti tnetv107x
3352
3353 #========================================================================
3354 # i386
3355 #========================================================================
3356 #########################################################################
3357 ## AMD SC520 CDP
3358 #########################################################################
3359 eNET_config     :       unconfig
3360         @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
3361
3362 sc520_cdp_config        :       unconfig
3363         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
3364
3365 sc520_spunk_config      :       unconfig
3366         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3367
3368 sc520_spunk_rel_config  :       unconfig
3369         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3370
3371 #========================================================================
3372 # MIPS
3373 #========================================================================
3374 #########################################################################
3375 ## MIPS32 4Kc
3376 #########################################################################
3377
3378 xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
3379
3380 incaip_100MHz_config    \
3381 incaip_133MHz_config    \
3382 incaip_150MHz_config    \
3383 incaip_config: unconfig
3384         @mkdir -p $(obj)include
3385         @[ -z "$(findstring _100MHz,$@)" ] || \
3386                 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
3387                   $(XECHO) "... with 100MHz system clock" ; \
3388                 }
3389         @[ -z "$(findstring _133MHz,$@)" ] || \
3390                 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
3391                   $(XECHO) "... with 133MHz system clock" ; \
3392                 }
3393         @[ -z "$(findstring _150MHz,$@)" ] || \
3394                 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
3395                   $(XECHO) "... with 150MHz system clock" ; \
3396                 }
3397         @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
3398
3399 tb0229_config: unconfig
3400         @$(MKCONFIG) $(@:_config=) mips mips tb0229
3401
3402 vct_premium_config              \
3403 vct_premium_small_config        \
3404 vct_premium_onenand_config      \
3405 vct_premium_onenand_small_config \
3406 vct_platinum_config             \
3407 vct_platinum_small_config       \
3408 vct_platinum_onenand_config     \
3409 vct_platinum_onenand_small_config \
3410 vct_platinumavc_config          \
3411 vct_platinumavc_small_config    \
3412 vct_platinumavc_onenand_config  \
3413 vct_platinumavc_onenand_small_config: unconfig
3414         @mkdir -p $(obj)include
3415         @if [ "$(findstring _premium,$@)" ] ; then \
3416                 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
3417                 $(XECHO) "... on Premium board variant" ; \
3418         fi
3419         @if [ "$(findstring _platinum_,$@)" ] ; then \
3420                 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
3421                 $(XECHO) "... on Platinum board variant" ; \
3422         fi
3423         @if [ "$(findstring _platinumavc,$@)" ] ; then \
3424                 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
3425                 $(XECHO) "... on PlatinumAVC board variant" ; \
3426         fi
3427         @if [ "$(findstring _onenand,$@)" ] ; then \
3428                 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
3429                 $(XECHO) "... on OneNAND board variant" ; \
3430         fi
3431         @if [ "$(findstring _small,$@)" ] ; then \
3432                 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
3433                 $(XECHO) "... stripped down image variant" ; \
3434         fi
3435         @$(MKCONFIG) -a vct mips mips vct micronas
3436
3437 #########################################################################
3438 ## MIPS32 AU1X00
3439 #########################################################################
3440
3441 dbau1000_config         :       unconfig
3442         @mkdir -p $(obj)include
3443         @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
3444         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3445
3446 dbau1100_config         :       unconfig
3447         @mkdir -p $(obj)include
3448         @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
3449         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3450
3451 dbau1500_config         :       unconfig
3452         @mkdir -p $(obj)include
3453         @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
3454         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3455
3456 dbau1550_config         :       unconfig
3457         @mkdir -p $(obj)include
3458         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3459         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3460
3461 dbau1550_el_config      :       unconfig
3462         @mkdir -p $(obj)include
3463         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3464         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3465
3466 gth2_config             :       unconfig
3467         @mkdir -p $(obj)include
3468         @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
3469         @$(MKCONFIG) -a gth2 mips mips gth2
3470
3471 pb1000_config           :       unconfig
3472         @mkdir -p $(obj)include
3473         @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
3474         @$(MKCONFIG) -a pb1x00 mips mips pb1x00
3475
3476 qemu_mips_config        : unconfig
3477         @mkdir -p $(obj)include
3478         @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
3479         @$(MKCONFIG) -a qemu-mips mips mips qemu-mips
3480
3481 #########################################################################
3482 ## MIPS64 5Kc
3483 #########################################################################
3484
3485 purple_config :         unconfig
3486         @$(MKCONFIG) $(@:_config=) mips mips purple
3487
3488 #========================================================================
3489 # Nios
3490 #========================================================================
3491
3492 #########################################################################
3493 ## Nios-II
3494 #########################################################################
3495
3496 EP1C20_config : unconfig
3497         @$(MKCONFIG)  EP1C20 nios2 nios2 ep1c20 altera
3498
3499 EP1S10_config : unconfig
3500         @$(MKCONFIG)  EP1S10 nios2 nios2 ep1s10 altera
3501
3502 EP1S40_config : unconfig
3503         @$(MKCONFIG)  EP1S40 nios2 nios2 ep1s40 altera
3504
3505 PK1C20_config : unconfig
3506         @$(MKCONFIG)  PK1C20 nios2 nios2 pk1c20 psyent
3507
3508 PCI5441_config : unconfig
3509         @$(MKCONFIG)  PCI5441 nios2 nios2 pci5441 psyent
3510
3511 # nios2 generic boards
3512 NIOS2_GENERIC = nios2-generic
3513
3514 $(NIOS2_GENERIC:%=%_config) : unconfig
3515         @$(MKCONFIG) $(@:_config=) nios2 nios2 nios2-generic altera
3516
3517 #========================================================================
3518 ## Microblaze
3519 #========================================================================
3520
3521 microblaze-generic_config:      unconfig
3522         @mkdir -p $(obj)include
3523         @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
3524
3525 #========================================================================
3526 # Blackfin
3527 #========================================================================
3528
3529 # Analog Devices boards
3530 BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
3531         bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit
3532
3533 # Bluetechnix tinyboards
3534 BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 \
3535         tcm-bf518 tcm-bf537
3536
3537 # Misc third party boards
3538 BFIN_BOARDS += bf537-minotaur bf537-srv1 bf561-acvilon blackstamp ip04
3539
3540 # I-SYST Micromodule
3541 BFIN_BOARDS += ibf-dsp561
3542
3543 $(BFIN_BOARDS:%=%_config)       : unconfig
3544         @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
3545
3546 bf527-ezkit-v2_config   : unconfig
3547         @$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \
3548                 bf527-ezkit blackfin blackfin bf527-ezkit
3549
3550 #========================================================================
3551 # AVR32
3552 #========================================================================
3553
3554 atngw100_config :       unconfig
3555         @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
3556
3557 atstk1002_config        :       unconfig
3558         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3559
3560 atstk1003_config        :       unconfig
3561         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3562
3563 atstk1004_config        :       unconfig
3564         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3565
3566 atstk1006_config        :       unconfig
3567         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3568
3569 favr-32-ezkit_config    :       unconfig
3570         @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
3571
3572 hammerhead_config       :       unconfig
3573         @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x
3574
3575 mimc200_config          :       unconfig
3576         @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x
3577
3578 #========================================================================
3579 # SH3 (SuperH)
3580 #========================================================================
3581
3582 #########################################################################
3583 ## sh2 (Renesas SuperH)
3584 #########################################################################
3585 rsk7203_config: unconfig
3586         @mkdir -p $(obj)include
3587         @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
3588         @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
3589
3590 #########################################################################
3591 ## sh3 (Renesas SuperH)
3592 #########################################################################
3593
3594 mpr2_config: unconfig
3595         @mkdir -p $(obj)include
3596         @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
3597         @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2
3598
3599 ms7720se_config: unconfig
3600         @mkdir -p $(obj)include
3601         @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
3602         @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
3603
3604 #########################################################################
3605 ## sh4 (Renesas SuperH)
3606 #########################################################################
3607
3608 MigoR_config :       unconfig
3609         @mkdir -p $(obj)include
3610         @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
3611         @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
3612
3613 ms7750se_config: unconfig
3614         @mkdir -p $(obj)include
3615         @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
3616         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
3617
3618 ms7722se_config :       unconfig
3619         @mkdir -p $(obj)include
3620         @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
3621         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
3622
3623 r2dplus_config  :   unconfig
3624         @mkdir -p $(obj)include
3625         @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
3626         @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
3627
3628 r7780mp_config: unconfig
3629         @mkdir -p $(obj)include
3630         @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
3631         @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
3632
3633 sh7763rdp_config  :   unconfig
3634         @mkdir -p $(obj)include
3635         @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
3636         @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
3637
3638 xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
3639 sh7785lcr_32bit_config \
3640 sh7785lcr_config  :   unconfig
3641         @mkdir -p $(obj)include
3642         @mkdir -p $(obj)board/renesas/sh7785lcr
3643         @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
3644         @if [ "$(findstring 32bit, $@)" ] ; then \
3645                 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
3646                 echo "TEXT_BASE = 0x8ff80000" > \
3647                         $(obj)board/renesas/sh7785lcr/config.tmp ; \
3648                   $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
3649         fi
3650         @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
3651
3652 ap325rxa_config  :   unconfig
3653         @mkdir -p $(obj)include
3654         @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
3655         @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
3656
3657 espt_config  :   unconfig
3658         @mkdir -p $(obj)include
3659         @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
3660         @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
3661
3662 #========================================================================
3663 # SPARC
3664 #========================================================================
3665
3666 #########################################################################
3667 ## LEON3
3668 #########################################################################
3669
3670 # Gaisler GR-XC3S-1500 board
3671 gr_xc3s_1500_config : unconfig
3672         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
3673
3674 # Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
3675 gr_cpci_ax2000_config : unconfig
3676         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
3677
3678 # Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
3679 # Development board Stratix II edition, FPGA Device EP2S60.
3680 gr_ep2s60_config: unconfig
3681         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
3682
3683 # Gaisler LEON3 GRSIM simulator
3684 grsim_config : unconfig
3685         @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
3686
3687 #########################################################################
3688 ## LEON2
3689 #########################################################################
3690
3691 # Gaisler LEON2 GRSIM simulator
3692 grsim_leon2_config : unconfig
3693         @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
3694
3695 #########################################################################
3696 #########################################################################
3697 #########################################################################
3698
3699 clean:
3700         @rm -f $(obj)examples/standalone/82559_eeprom                     \
3701                $(obj)examples/standalone/atmel_df_pow2                    \
3702                $(obj)examples/standalone/eepro100_eeprom                  \
3703                $(obj)examples/standalone/hello_world                      \
3704                $(obj)examples/standalone/interrupt                        \
3705                $(obj)examples/standalone/mem_to_mem_idma2intr             \
3706                $(obj)examples/standalone/sched                            \
3707                $(obj)examples/standalone/smc91111_eeprom                  \
3708                $(obj)examples/standalone/test_burst                       \
3709                $(obj)examples/standalone/timer
3710         @rm -f $(obj)examples/api/demo{,.bin}
3711         @rm -f $(obj)tools/bmp_logo        $(obj)tools/easylogo/easylogo  \
3712                $(obj)tools/env/{fw_printenv,fw_setenv}                    \
3713                $(obj)tools/envcrc                                         \
3714                $(obj)tools/gdb/{astest,gdbcont,gdbsend}                   \
3715                $(obj)tools/gen_eth_addr    $(obj)tools/img2srec           \
3716                $(obj)tools/mkimage         $(obj)tools/mpc86x_clk         \
3717                $(obj)tools/ncb             $(obj)tools/ubsha1
3718         @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}        \
3719                $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}      \
3720                $(obj)board/trab/trab_fkt   $(obj)board/voiceblue/eeprom   \
3721                $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
3722                $(obj)arch/blackfin/lib/u-boot.lds                                 \
3723                $(obj)u-boot.lds                                           \
3724                $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]
3725         @rm -f $(obj)include/bmp_logo.h
3726         @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
3727         @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
3728         @rm -f $(ONENAND_BIN)
3729         @rm -f $(obj)onenand_ipl/u-boot.lds
3730         @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
3731         @find $(OBJTREE) -type f \
3732                 \( -name 'core' -o -name '*.bak' -o -name '*~' \
3733                 -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \) -print \
3734                 | xargs rm -f
3735
3736 clobber:        clean
3737         @find $(OBJTREE) -type f \( -name .depend \
3738                 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
3739                 -print0 \
3740                 | xargs -0 rm -f
3741         @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
3742                 $(obj)cscope.* $(obj)*.*~
3743         @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
3744         @rm -f $(obj)u-boot.kwb
3745         @rm -f $(obj)u-boot.imx
3746         @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
3747         @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
3748         @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
3749         @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
3750         @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
3751
3752 ifeq ($(OBJTREE),$(SRCTREE))
3753 mrproper \
3754 distclean:      clobber unconfig
3755 else
3756 mrproper \
3757 distclean:      clobber unconfig
3758         rm -rf $(obj)*
3759 endif
3760
3761 backup:
3762         F=`basename $(TOPDIR)` ; cd .. ; \
3763         gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
3764
3765 #########################################################################